2004 Chevrolet Malibu Belts and Hoses

Name: Molded Heater Hose: Rubber, OE Fix, Upgraded Material
Brand: Dorman
SKU: 626-666
Price: 96.99 USD

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 2004 Malibu. Advance Auto Parts has popular Malibu parts like Heater Hoses, Fuel Hoses, Engine Cooling Hoses and more. You’ll also find aftermarket and OEM Belts and Hoses for other Malibu model years including 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 and more. Select a category of 2004 Chevrolet Malibu Belts and Hoses below and start saving instantly.

Popular 2004 Chevrolet Malibu Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Serpentine Belt Drive Component Kits

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Transmission Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2004 Chevrolet Malibus

from

$96.99

Original equipment HVAC heater hose assemblies often fail due to cracks in the plastic T-connector. This Dorman OE FIX replacement features an upgraded aluminum T-connector to prevent similar failures in the future..

Product Features:

Upgraded material – this replacement engine heater hose assembly features an aluminum T-connector for added durability.
Application specific – designed to match the original fit and function of heater hoses on certain vehicle years, makes and models.
Complete replacement – includes necessary clamps for easy installation
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience

from

$83.99

Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$90.75

The ACDelco GM Original Equipment Engine Oil Cooler Hose Assembly is a GM-recommended replacement for your vehicle’s original component. It transfers engine oil between the engine and the engine oil cooler. This original equipment engine oil cooler hose assembly has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$74.99

Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair.

Product Features:

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential.
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$12.29

Direct replacement – this fuel filler neck hose is made to match the original equipment part on specific vehicles.
Durable construction – made of fuel-resistant materials to reduce future failure potential.
Regulatory compliant – built to meet emission and inspection standards
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$28.99

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent splitting, ballooning and elongation as well as resist ozone and other detrimental environmental elements, coolants and temperature variations of -40øF (-40øC) to +257øF (+125øC). With corrugations that provide excellent hose flexibility without flattening or collapsing, the Dayco flex radiator hose also features a helical steel coil spring for increased flexibility.

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$29.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
EPDM tube and Neoprene cover for extended service life
Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
Resistant to heat, oil and ozone
Performs to SAE 20R5 Type EC Class D-2 specifications
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Caution: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.

from

$13.99

Proper crankcase ventilation is key to smooth performance and engine longevity. Made from quality materials to resist cracking and brittleness, this PCV hose replaces a worn or leaking original equipment hose.

Product Features:

Ideal replacement – this PCV tubing replaces the original tubing on specified vehicle years, makes and models.
Durable materials – this PCV tubing is designed to withstand exposure to extreme temperatures and oil vapors to resist cracking and leaking
Cost-effective solution – offers original equipment quality at a competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

from

$43.99

GM Genuine Parts PCV Valve Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$57.99

Dayco No Slack Automatic Belt Tensioners are built to outperform and outlast competitive OE parts. This specific integral Dayco Automatic Belt Tensioner is manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension. The heavy duty cast aluminum spring case resists cracking and fatigue. Each component is built to resist rust, endure the toughest of conditions while promoting quieter performance and longer life.

Product Features:

Manufactured with a specially coated patented flat wire spring to allow the internal tension to be concentric, thus providing a more even degree of constant tension
The heavy duty cast aluminum spring case resists cracking and fatigue
Includes installation instructions

from

$145.99

Litens Automotive is the original equipment supplier of this tensioner to General Motors, Saturn, and Suzuki. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The Litens replacement part maintains the round wire spring, the heavy duty steel pulley, and the internal damping components specified by the O.E. manufacturer. The tensioner maintains the OE designed lift feature for ease of belt removal and installation. Also used on Holden vehicles in Australia. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
This belt tensioner has belt-length indicator marking to warn of excessive belt stretch. Durable Steel Pulley for long service life and performance.
Professional Mechanics will change this tensioner in about 1 hour.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$21.49

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$70.99

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$116.91

AT Oil Cooler Hose A

from

$38.49

Litens Automotive is the original equipment (O.E.) supplier of this idler pulley assembly for a wide range of General Motors vehicles and applications. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to the same exacting specifications as the O.E. part. Like the original part, this pulley is manufactured of heavy duty steel for maximum life and performance. This is a complete pulley ASSEMBLY including the steel pulley, dust shield, and mounting bolt. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley. Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance.
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.
76mm O.D.; 17mm I.D.; 30.5mm width for a rib serpentine belt, Smooth non-flanged running surface, steel construction.

from

$72.73

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$43.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty polymer construction for long life and trouble-free performance. Ideal for Nissan power steering applications. Supplied with a new washer/dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Installation instructions included.

from

$21.29

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$10.79

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$27.49

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$22.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$56.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$5.09

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$53.44

Built for passenger cars and light-duty trucks, Dayco’s extensive line of Poly Rib serpentine belts are engineered for high mileage, demanding drives found in today’s vehicles. As the manufacturer of the first original equipment multi-ribbed serpentine belt, Dayco’s commitment to automotive product excellence and innovation is unwavering. The Dayco Poly Rib W Profile serpentine belt is the most innovative advancement in serpentine belt design in more than 30 years. Developed through extensive laboratory and actual road mileage testing, this unique rib profile EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and help eliminate noisy belt conditions. Constructed with aramid-reinforced EPDM compounds, the Dayco W Poly Rib serpentine belt delivers more than just OE-required quality. It delivers the solution to troublesome drive problems.

Product Features:

Constructed with aramid-reinforced EPDM compounds
Engineered to conform to high mileage, worn or misaligned drives
Helps eliminate noisy belt conditions Related Documents: (PDF 63.78 KB)

from

$15.49

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

Upgrade your 2004 Chevrolet Malibu with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2004 Chevrolet Malibu, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your Malibu functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Belts and Hoses for the 2004 Chevrolet Malibu, designed to meet your needs without breaking the bank. From Heater Hose replacements to Fuel Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2004 Chevrolet Malibu at great prices. Our Belts and Hoses inventory for this model ranges from just $1.79 to $206.99, with an average price of $41.67. Our 66 Belts and Hoses in stock come from 14 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Malibu without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Malibu, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, Litens, Driveworks, and more. Dayco Belts and Hoses start at just $9.79 and boast an impressive 5 stars average rating from customers. Litens and Driveworks also bring quality to the table, with Belts and Hoses available starting at $22.79, and at an average 5 stars rating. With 4,228 customer reviews and counting, our 2004 Chevrolet Malibu Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Chevrolet Malibu is always ready to roll. We’re committed to providing you with everything you need to keep your Malibu in top shape, all in one place. Start shopping confidently below for your 2004 Chevrolet Malibu!

Best-Selling Heater Hoses for 2004 Chevrolet Malibus

Enhance the driving experience in your Chevrolet with 9 quality Heater Hose components, starting at $7.29.

show more show less

from

$35.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$18.79

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$206.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models.
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking.
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$18.29

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$7.29

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$15.49

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$30.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$22.49

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$11.50

Designed to replace original equipment manufacturer hose, Dayco Molded Heater Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.

Product Features:

Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
Meets SAE J20R4, Class D-1 requirements for improved service hose
Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
Limited Three Year Warranty

Top Picks for 2004 Chevrolet Malibu Engine Cooling Hoses

Upgrade Chevrolet Malibus with top-quality Engine Cooling Hoses parts, including 8 OEM and aftermarket selections for your 2004 model.

show more show less

from

$21.99

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$19.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$24.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$19.49

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$69.99

Shock Kit

from

$54.99

Shock Kit

from

$39.76

Radiator Hose

from

$25.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

In-Demand Serpentine and V Belts for 2004 Chevrolet Malibus

Select from 14 premium Serpentine and V Belts parts for your 2004 Chevrolet Malibu, with prices ranging from $19.54 to $100.04.

show more show less

from

$54.90

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$44.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$30.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$22.79

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$42.02

Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Strong tensile cords limit stretching.
Supports higher horsepower loads.
Made from high strength synthetic rubber.

from

$83.99

Engineered to match OE specifications with unique features that enhance vehicle performance and safety
For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
Provides all the parts needed in one box, helping simplify installation

from

$29.30

Dayco, Acc. Belt Idler Pulley

from

$31.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$100.04

ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:

Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life

from

$35.35

Dayco, Drive Belt

from

$19.54

Drive Belt

from

$22.60

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$22.33

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

Most Sold 2004 Chevrolet Malibu Belt Tensioners

Explore our best-selling Chevrolet parts for the 2004 Malibu among 5 OEM and aftermarket options starting from $59.99.

show more show less

from

$102.99

Litens was the Original Equipment (O.E.) supplier of this Chrysler tensioner and offers this “O.E. Exact”* part for the aftermarket. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). This tensioner has an integrated lift feature in the tensioner arm to assist in belt removal and installation. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” . Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$68.99

Litens was the Original Equipment (O.E.) supplier of this part and offers this “O.E. Exact”* part for the aftermarket. This popular tensioner designed for General Motors vehicles, looks, fits, and performs like the original part being replaced. O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. Caution: Many non-OE aftermarket parts have removed the internal damping component in their designs. This may cause system noise and vibration. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada” Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Polymer Pulley
Professional Mechanics will change this tensioner in 20 minutes
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$59.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Dayco’s patented Nylon Pivot Bushing keeps internal components in constant contact to maintain proper tensioner alignment

from

$132.12

ACC. BELT TENSIONER

from

$96.13

Acc. Belt Tensioner

Top-Rated Belts and Hoses Brands For Your 2004 Chevrolet Malibu

Shop for the best-rated brands offering Belts and Hoses and other products for your 2004 Chevrolet Malibus. Below you’ll find some of our best rated Belts and Hoses from Dayco, Litens, and Driveworks, and more. Belts and Hoses from these brands that fit a 2004 Malibu start at just $9.79 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2004 Chevrolet Malibu Belts and Hoses

When it comes to maintaining or upgrading your 2004 Chevrolet Malibu, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2004 Chevrolet Malibu. With over 25 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $9.79, with an average price of just $30.30. Plus, with over 793 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$83.99

This product is not rated

Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set

“”

from
$29.3

This product is not rated

Dayco, Acc. Belt Idler Pulley

“”

from
$18.79

This product is not rated

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length

“”

Popular Litens 2004 Chevrolet Malibu Belts and Hoses

Litens auto parts is one of the highest quality Belts and Hose brands in the market. Any 2004 Chevrolet Malibu owner should feel confident when installing genuine Litens parts in their vehicle. To ensure the best fit and performance for your 2004 Malibu, Advance Auto Parts carries a full inventory of 5 Litens Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Litens Belts and Hoses range from $28.99 to $102.99, plus, with more than 58 customer reviews and an impressive 5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$102.99

(5)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Seems to be a quality product, not sure of the brand name, never used it before but time will tell”

from
$38.49

This product is not rated

Idler Pulley: Direct Fit, Steel, 76mm Diameter, w/ Hardware

“”

from
$43.99

This product is not rated

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 82mm Diameter

“”

FAQs for 2004 Chevrolet Malibu Belts and Hoses

Which Belts and Hoses are best-sellers for 2004 Chevrolet Malibus?

Out of 66 Belts and Hoses that fit 2004 Chevrolet Malibus, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (10457820) – $28.99
Poly Rib Belt Serpentine Belt; 88.25 Long, 6 Rib Count (99984568) – $41.49
Poly Rib Belt Serpentine Belt; 40.55 Long, 5 Rib Count (19270547) – $30.49

What’s the price range for 2004 Chevrolet Malibu Belts and Hoses?

Belts and Hose prices for the 2004 Chevrolet Malibu start at $1.79 and go up to $206.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2004 Chevrolet Malibu?

The average price for Belts and Hoses for the 2004 Chevrolet Malibu is $41.67. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet Malibu model years?

Yes, we currently carry Belts and Hoses for 43 model years of Chevrolet Malibus between 1964 and 2025. Belts and Hoses are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Belts and Hoses for my 2004 Chevrolet Malibu?

The cheapest 2004 Chevrolet Malibu Belts and Hoses we carry in stock are:

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (10504876) – $1.79
Safety Stripe« Standard Straight Heater Hose (10504844) – $2.49
HEATER HOSE (50100222) – $6.34
Radiator Hose (12592215) – $6.98
Premium Molded Heater Hose (10510603) – $7.29

What are the top-rated Belts and Hoses that fit the 2004 Chevrolet Malibu?

Out of 4,228 reviews by customers, our 2004 Chevrolet Malibu Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2004 Chevrolet Malibu and their top-rated products:

Belt Tensioners
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457992) – $102.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457751) – $68.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (15130019) – $59.99
Radiator Hoses
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457992) – $102.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457751) – $68.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (15130019) – $59.99
Serpentine and V Belts
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457992) – $102.99
- Accessory Drive Belt Tensioner – Original Equipment Quality (10457751) – $68.99
- Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (15130019) – $59.99

What types of Belts and Hoses do you sell for my 2004 Chevrolet Malibu?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2004 Chevrolet Malibu:

Can I get help with 2004 Chevrolet Malibu Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet Malibu Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet Malibu Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Chevrolet Malibu Belts and Hoses

Dorman – Molded Heater Hose: Rubber, OE Fix, Upgraded Material (Part No.626-666)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5050405K1)

ACDelco – GM Original Equipment Engine Oil Cooler Hose (Part No.A6200206549ACD)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dorman – Fuel Filler Neck Hose (Part No.573-068)

Dorman – Fuel Filler Neck Hose (Part No.573-100)

Dayco – Flex Radiator Hoses; EPDM Rubber, 3 Inch Long, 1.5 Inch Inner Dia. (Part No.81221)

Gates – Green Stripe« Heavy-Duty Vulco-Flex« Coolant Hose (Part No.26501)

Dorman – Help – PCV Hose – Fits 3.1L and 3.4L (Part No.46014)

GM Genuine Parts – Positive Crankcase Ventilation (PCV) Hose (Part No.12617908)

Dayco – Automatic Belt Tensioner (Part No.89290)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999679A)

Gates – Premium Molded Coolant Hose (Part No.20345)

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25265)

Dorman – AT Oil Cooler Hose A (Part No.J2068751130DOR)

Litens – Idler Pulley: Direct Fit, Steel, 76mm Diameter, w/ Hardware (Part No.900554A)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G6020926413DAY)

Dorman – Idler Pulley (Pulley only) (Part No.419-617)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 82mm Diameter (Part No.900203A)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 36 Inch Length (Part No.80405)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 4.50" Long, .59" Diameter (Part No.A70459)

Driveworks – Poly Rib Belt Serpentine Belt; 93.5 Long, 6 Rib Count (Part No.935K6)

Driveworks – Poly Rib Belt Serpentine Belt; 40.55 Long, 5 Rib Count (Part No.405K5)

Dayco – Serpentine Assy. Idler/Tensioner Pulley; Steel, 77mm Dia., 30mm Width, 6 Grooves (Part No.89171)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 76mm Dia., 28.7mm Width, 6 Grooves (Part No.89009)

Driveworks – Automotive V-Belt (Part No.48513)

Dayco – Dayco, Drive Belt (Part No.W10001221371DAY)

Dayco – Bottom Cog V-Belt; 42.25 Inch Long, Exact Fit Premium Quality (Part No.15423)

Dayco – Molded Heater Hose; EPDM Rubber, 19/32 Inch Diameter, 12 Inch Length (Part No.87763)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 12 Inch Length (Part No.87658)

Dorman – Molded Heater Hose: Aluminum (Part No.626-549)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 11 Inch Length (Part No.87705)

Gates – Premium Molded Heater Hose (Part No.19026)

Dayco – Molded Heater Hose; EPDM Rubber, 23/32 Inch Diameter, 28 Inch Length (Part No.86090)

Gates – Premium Molded Heater Hose (Part No.19815)

Gates – Premium Molded Heater Hose (Part No.19816)

Dayco – Molded Small ID Heater Hose (Part No.R3030173858DAY)

Dorman – Fuel Filler Neck Hose (Part No.573-100)

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.25 Inch Inner Dia. (Part No.81051)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.25" Diameter (Part No.D72217)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.31" Diameter (Part No.E72280)

Dayco – Flex Radiator Hoses; EPDM Rubber, 23 Inch Long, 1.25 Inch Inner Dia. (Part No.81071)

Suncore – Shock Kit (Part No.2-12S251040-001)

Suncore – Shock Kit (Part No.2-12S251010-001)

ACDelco – Radiator Hose (Part No.G2000583828ACD)

Gates – Premium Molded Coolant Hose (Part No.23021)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W1000146354MBL)

Dayco – Poly Rib Belt Serpentine Belt; 88.25 Long, 6 Rib Count (Part No.5060883)

Driveworks – Poly Rib Belt Serpentine Belt; 88.25 Long, 6 Rib Count (Part No.883K6)

Dayco – Poly Rib Belt Serpentine Belt; 40.55 Long, 5 Rib Count (Part No.5050405)

Driveworks – Poly Rib Belt Serpentine Belt; 40.55 Long, 5 Rib Count (Part No.405K5)

Bando – Multi Rib (Serpentine) Belt (Part No.W1000146354BAN)

Dayco – Serpentine Belt Kit; With Belt and Tensioner, 2 Piece Set (Part No.5050405K1)

Dayco – Dayco, Acc. Belt Idler Pulley (Part No.G60201221081DAY)

Gates – V-Ribbed Serpentine Belt: 41" Long, 5 Rib Count, Exact Fit (Part No.K050404)

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000612114ACD)

Dayco – Dayco, Drive Belt (Part No.W10001221338DAY)

Bando – Drive Belt (Part No.W100028235BAN)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000137333CON)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100028235MBL)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999581A)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999553A)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89241)

Worldpac – ACC. BELT TENSIONER (Part No.G60014188684INA)

ACDelco – Acc. Belt Tensioner (Part No.G6001584544ACD)