2004 Chevrolet Avalanche 2500 Belts and Hoses

Below you will find various in-demand Chevrolet Belts and Hoses, components and accessories for your 2004 Avalanche 2500. Advance Auto Parts has popular Avalanche 2500 parts like Serpentine and V Belts, Radiator Hoses, Belt Tensioners and more. You’ll also find aftermarket and OEM Belts and Hoses for other Avalanche 2500 model years including 2002, 2003, 2005, 2006 and more. Select a category of 2004 Chevrolet Avalanche 2500 Belts and Hoses below and start saving instantly.

Popular 2004 Chevrolet Avalanche 2500 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Heater Hose Fittings

Fuel Hoses

Windshield Washer Hoses

Engine Oil Cooler Hoses

Fuel Injection Fuel Feed Hose Seals

Essential Belts and Hoses for 2004 Chevrolet Avalanche 2500s

from

$59.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$71.99

This engine oil cooler hose assembly matches the fit and function of the original equipment components for reliable repair and restoration of proper oil circulation between the oil cooler and engine.

Product Features:

Ideal replacement – this engine oil cooler hose assembly is a direct replacement for the original hose assembly
Quality materials – this engine oil cooler hose assembly is made from corrosion-resistant materials to ensure the smooth transfer of oil from the engine to the cooler
Easy to install – no special tools required
Quality tested – rigorous quality control ensure this hose assembly conforms to product standards

from

$12.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$26.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$27.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$84.99

Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides maximum performance at extreme, extended operating temperatures
Construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$105.99

GM Genuine Parts Fuel Supply Hoses are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$3.49

GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$14.99

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

This pulley is manufactured by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made in Canada using the O.E. specified design and meets all performance and durability requirements. Heavy duty thermoplastic construction for long life and trouble-free performance. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$107.99

This replacement fuel line is made to safely transfer fuel and endure in tough underhood and undercar conditions.

Product Features:

Trustworthy replacement – this fuel line safely replaces the original fuel line to fix fuel leaks
Durable design – withstands tough underhood and undercar conditions
Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
Comprehensive solutions – this fuel line is part of a diverse collection of fuel line repair solutions

from

$24.79

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

It has all the quality features of Gates molded coolant hose and is similar to OEM specifications.
Designed to resist electrochemical degradation, the leading cause of hose failure
EPDM tube, synthetic fiber reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$3.29

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which extends the service life.
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$97.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$56.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular tensioner used on the air-conditioning drive for Chevrolet and GMC 8.1L Trucks and Vans. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design. This tensioner is equipped with a Steel pulley, molded lift feature on the arm to assist in belt removal and installation, as well as 2 molded locator pins on the base to ensure proper installation. The tensioner comes equipped with a new installation bolt. As with the O.E. part, this tensioner is manufactured in Canada for exact performance and fit. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one on the world’s largest original equipment tensioner suppliers to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in under 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$56.99

It has all the quality features of Gates molded coolant hose and is similar to OEM specifications.
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$1.99

Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$55.99

This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$12.79

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.99

Autotecnica offers high-quality aftermarket parts for a wide variety of Asian and North American passenger cars and trucks, include braking, cooling, driveline, electrical, engine, fuel, HVAC, steering, and suspension categories. Manufactured in strict accordance with ISO/TS 16949 QMS specifications, Autotecnica is the smart choice. Whether you’re a DIY enthusiast or professional technician in need of replacement parts that meet OEM specifications, Autotecnica is an excellent alternative to expensive “Genuine” components.

from

$32.99

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for durability and quality performance.
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
Original equipment quality suitable for virtually all domestic and import vehicles in today’s fleet
Bearings meet or exceed OE standards with application-specific speed and load requirements to withstand high temperatures under the hood
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation in harsh conditions

from

$28.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$245.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Materials specially designed to resist collapse in a vacuum
Designed to withstand electrochemical degradation, the leading cause of hose failure
EPDM tube; synthetic fiber knit reinforcement, heat, ozone- and chemical coolant-resistant EPDM cover
Manufactured with exact OEM hose components (quick connects, tap/tee connectors, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$31.99

This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$70.99

This windshield washer hose is designed to match the fit and function of the original hose on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this windshield washer hose is designed to match the fit and function of the original hose on specified vehicles
Restores functionality – reliable replacement for an original hose that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Upgrade your 2004 Chevrolet Avalanche 2500 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2004 Chevrolet Avalanche 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Belts and Hoses are key to keeping your Avalanche 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 52 Belts and Hoses for the 2004 Chevrolet Avalanche 2500, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2004 Chevrolet Avalanche 2500 at great prices. Our Belts and Hoses inventory for this model ranges from just $1.99 to $245.99, with an average price of $46.79. Our 52 Belts and Hoses in stock come from 8 trusted brands, so you’re sure to find the right part for your 2004 Chevrolet Avalanche 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 Chevrolet Avalanche 2500, we stock popular OEM and aftermarket Belts and Hoses from top names like Litens, Dayco, DriveWorks, and more. Litens Belts and Hoses start at just $24.99 and boast an impressive 4.7 stars average rating from customers. Dayco and DriveWorks also bring quality to the table, with Belts and Hoses available starting at $14.29, and at an average 4.5 stars rating. With 1,423 customer reviews and counting, our 2004 Chevrolet Avalanche 2500 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 Chevrolet Avalanche 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Avalanche 2500 in top shape, all in one place. Start shopping confidently below for your 2004 Chevrolet Avalanche 2500!

Best-Selling Serpentine and V Belts for 2004 Chevrolet Avalanche 2500s

Enhance the driving experience in your Chevrolet with 11 quality Serpentine and V Belt components, starting at $14.29.

show more show less

from

$14.29

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$27.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$58.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$65.99

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$41.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$40.49

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$61.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the surface of the ribs
Meets or exceeds all OEM specifications
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$57.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$62.99

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all OEM specifications
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$84.99

Patented material provides maximum performance at extreme, extended operating temperatures
Construction resists cracking and wear, even at extreme temperatures
The special compound provides unprecedented flexibility, stability, load-carrying capacity and belt life.
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty serpentine belts on the market
Designed to save your fleet’s money and reduce downtime
It is recommended to replace the tensioner (if equipped)

from

$65.99

Patented material provides peak performance at prolonged extreme operating temperatures
Heavy-duty construction resists cracking and wear, even at extreme temperatures
Special compound provides unmatched flexibility, stability, load capacity and belt life
A problem-solving tool designed for the toughest applications
Consistently outperforms other heavy-duty coil belts on the market
Designed to save your fleet money and reduce downtime
Replacement of the tensioner is recommended (if equipped)

Most Popular 2004 Chevrolet Avalanche 2500 Radiator Hoses

Customize your Chevrolet with 5 Radiator Hoses products like Coolant Hoses and By-Pass Hoses, all priced under $245.99.

show more show less

from

$23.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$28.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$245.99

Materials specially designed to resist collapse in a vacuum
Designed to withstand electrochemical degradation, the leading cause of hose failure
EPDM tube; synthetic fiber knit reinforcement, heat, ozone- and chemical coolant-resistant EPDM cover
Manufactured with exact OEM hose components (quick connects, tap/tee connectors, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$24.79

It has all the quality features of Gates molded coolant hose and is similar to OEM specifications.
Designed to resist electrochemical degradation, the leading cause of hose failure
EPDM tube, synthetic fiber reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transportation applications.

from

$1.99

Premium hose constructed for long service life.

Product Features:

Good resistance to high temperatures for extended periods of time, which prolongs service life
Meets SAE 20R3 Standard Wall Class D-2 requirements
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

Top Picks for 2004 Chevrolet Avalanche 2500 Belt Tensioners

Upgrade Chevrolet Avalanche 2500s with top-quality Belt Tensioners parts, including 4 OEM and aftermarket selections for your 2004 model.

show more show less

from

$53.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavyduty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life.
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$117.99

This Litens tensioner is manufactured by the Original Equipment (O.E.) supplier of this popular tensioner used on G.M. V-8 8.1L vehicles. This “O.E. Exact”* part for the aftermarket meets all original equipment form, fit, and function specifications. *(O.E. Exact – Original Equipment manufacturers prohibits the use of their part number or logo on parts sold to other customers. Therefore, the Litens aftermarket part may have minor cosmetic differences but still be exact in performance and design). Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner are marked “Made in Canada”. This is the tensioner for the main serpentine drive. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$97.99

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
This tensioner is another Dayco product proudly made in the USA

from

$56.99

Manufactured by one on the world’s largest original equipment tensioner suppliers to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in under 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

In-Demand Heater Hoses for 2004 Chevrolet Avalanche 2500s

Select from 14 premium Heater Hoses parts for your 2004 Chevrolet Avalanche 2500, with prices ranging from $1.99 to $56.99.

show more show less

from

$13.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$25.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$26.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$24.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$55.99

Ideal replacement – this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
Industry-leading design – professionally engineered by the aftermarket leader in heater hose assemblies

from

$1.99

Specifically designed to be compatible with all common coolants and coolant additives
Constructed using all EPDM compounds and spiral reinforcements
Similar to SAE 20R3, Class D-2
Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
PLEASE NOTE: Item is sold and priced by the foot. See store for details.

from

$12.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$19.79

Quick-Lok(R)Connectors provide a fast, easy way to connect replacement heater hose on cars and trucks.

Product Features:

Used on cars and trucks when the original quick connector fails, or the replacement hose does not include them
Made with a new design that holds the O-ring so they can’t be lost or damaged
Fit just as the OEM quick connects for easy installation as well as removal

from

$15.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$27.49

HVAC heater hose connectors fail when the plastic material fatigues from heat and vibration. This upgraded Dorman OE FIX replacement connector is made from corrosion-resistant stainless steel for greater durability.

Product Features:

Improved design – this HVAC heater hose connector has been redesigned for greater durability the original equipment part
Durable construction – this heater hose connector is made of stainless steel instead of the original equipment connector to reduce damage from heat fatigue and vibration
Easy to install – matches the original equipment form and dimensions for a simple replacement
Quality tested – this part has undergone try-on, corrosion, heat and pressure testing to ensure a quality fit and long service life

from

$25.99

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$56.99

It has all the quality features of Gates molded coolant hose and is similar to OEM specifications.
Designed to resist electrochemical degradation, which is the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$30.99

When the plastic original equipment HVAC cooling hose quick connector becomes brittle from heat and abrasion, and cracks, leaks and breaks free from the cooling hose, the dealership solution is a similar plastic replacement. Avoid a similar future failure by upgrading your repair with this more rugged Dorman OE FIX metal connector. Designed to match the performance of the factory design but engineered to far exceed its service life, this sturdy and reliable replacement connector is manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles.

Product Features:

Upgraded repair – this HVAC cooling hose quick connector is manufactured from rugged metal and is designed to help provide a longer lasting repair than the original equipment plastic connector
Prevents leaks – engineered to resist the heat and abrasion that can eventually cause a plastic cooling hose quick connector to crack and fail
Direct replacement – manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles
Performance tested – this upgraded connector design has been rigorously pressure-tested for reliable performance

from

$28.99

When the plastic original equipment HVAC heater hose/coolant hose connector becomes brittle from heat and abrasion, and cracks, leaks and breaks free from the hose, the dealership solution is a similar plastic replacement. Avoid a similar future failure by upgrading your repair with this more rugged Dorman OE FIX metal connector. Designed to match the performance of the factory design but engineered to far exceed its service life, this sturdy and reliable replacement connector is manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles.

Product Features:

Upgraded repair – this HVAC heater hose/coolant hose connector is manufactured from rugged metal and is designed to help provide a longer lasting repair than the original equipment plastic connector
Prevents leaks – engineered to resist the heat and abrasion that can eventually cause a plastic hose connector to crack and fail
Direct replacement – manufactured to precise standards for a seamless fit on specified Cadillac, Chevrolet and GMC vehicles
Performance tested – this upgraded connector design has been rigorously pressure-tested for reliable performance

Most Sold 2004 Chevrolet Avalanche 2500 Pulleys

Explore our best-selling Chevrolet parts for the 2004 Avalanche 2500 among 9 OEM and aftermarket options starting from $12.79.

show more show less

from

$31.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$34.99

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Installation instructions included.

from

$24.99

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$24.99

Manufactured by Litens, the largest original equipment tensioner and pulley supplier in the world, to ensure proper form, fit, and performance.
Heavy Duty Glass Reinforced Polymer Pulley for optimized dimensional control and running surface durability
OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

from

$32.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$14.99

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$73.99

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the G.M. Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is supplied with a new integrated bolt/dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$25.99

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last thanks to superior resistance to dirt, salt, chemicals, and other contaminants that can be found under the hood
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
High-end bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$12.79

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Top-Rated Belts and Hoses Brands For Your 2004 Chevrolet Avalanche 2500

Shop for the best-rated brands offering Belts and Hoses and other products for your 2004 Chevrolet Avalanche 2500s. Below you’ll find some of our best rated Belts and Hoses from Litens, Dayco, and DriveWorks, and more. Belts and Hoses from these brands that fit a 2004 Avalanche 2500 start at just $14.29 and are rated as high as 4.7 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Litens 2004 Chevrolet Avalanche 2500 Belts and Hoses

When it comes to maintaining or upgrading your 2004 Chevrolet Avalanche 2500, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Litens ticks all of those boxes. We offer a wide selection of Litens Belts and Hoses, specifically designed for the 2004 Chevrolet Avalanche 2500. With over 3 Litens brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $24.99, with an average price of just $59.32. Plus, with over 89 customer reviews and an average rating of 4.7 stars, you can trust that our Litens Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $34.99

(39)

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter

“Perfect fit and quite!!”

from $117.99

(1)

Accessory Drive Belt Tensioner – Original Equipment Quality

“Fixed my truck, great price.”

from $24.99

(49)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter

“OK”

Popular Dayco 2004 Chevrolet Avalanche 2500 Belts and Hoses

Dayco auto parts is one of the highest quality Belts and Hose brands in the market. Any 2004 Chevrolet Avalanche 2500 owner should feel confident when installing genuine Dayco parts in their vehicle. To ensure the best fit and performance for your 2004 Avalanche 2500, Advance Auto Parts carries a full inventory of 3 Dayco Belts and Hoses. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Dayco Belts and Hoses range from $23.99 to $53.99, plus, with more than 24 customer reviews and an impressive 4.5 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from $27.99

(22)

Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count

“Would definitely buy again”

from $53.99

(1)

Automatic Belt Tensioner, Dayco

“LINE UP PINS ON OLD ONE BROKE TAKING IT OFF. HAD TO REMOVE COMPLETE BRACKET TO EXTRACT PINS. REPLACEMENT PART FIT PERFECT, ONE BOLT INSTALL.”

from $23.99

(1)

Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length

“Form Fit and Function was great”

FAQs for 2004 Chevrolet Avalanche 2500 Belts and Hoses

Which Belts and Hoses are best-sellers for 2004 Chevrolet Avalanche 2500s?

Out of 52 Belts and Hoses that fit 2004 Chevrolet Avalanche 2500s, the following parts are the top sellers:

Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (10457738) – $34.99
Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (22149402) – $13.99
Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (10457820) – $24.99

What’s the price range for 2004 Chevrolet Avalanche 2500 Belts and Hoses?

Belts and Hose prices for the 2004 Chevrolet Avalanche 2500 start at $1.99 and go up to $245.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2004 Chevrolet Avalanche 2500?

The average price for Belts and Hoses for the 2004 Chevrolet Avalanche 2500 is $46.79. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Chevrolet Avalanche 2500 model years?

Yes, we currently carry Belts and Hoses for 3 model years of Chevrolet Avalanche 2500s between 2002 and 2006. Belts and Hoses are bought most frequently for the following model years: 2006, 2005, 2003, and 2002.

What are the cheapest Belts and Hoses for my 2004 Chevrolet Avalanche 2500?

The cheapest 2004 Chevrolet Avalanche 2500 Belts and Hoses we carry in stock are:

Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (10844721) – $1.99
Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (10505038) – $1.99
Fuel Feed Pipe O-Ring (15730384) – $3.49
Idler Pulley (Pulley only) (10040953) – $12.79
Heater Hose Connector (11918555) – $12.99

What are the top-rated Belts and Hoses that fit the 2004 Chevrolet Avalanche 2500?

Out of 1,423 reviews by customers, our 2004 Chevrolet Avalanche 2500 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2004 Chevrolet Avalanche 2500 and their top-rated products:

Serpentine and V Belts
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (99984537) – $14.29
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (20060956) – $27.99
- Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (3290161) – $58.99
Radiator Hoses
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (99984537) – $14.29
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (20060956) – $27.99
- Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (3290161) – $58.99
Belt Tensioners
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (99984537) – $14.29
- Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (20060956) – $27.99
- Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (3290161) – $58.99

What types of Belts and Hoses do you sell for my 2004 Chevrolet Avalanche 2500?

As of 11/2/25, these are some of the most in-demand types of Belts and Hoses for a 2004 Chevrolet Avalanche 2500:

Can I get help with 2004 Chevrolet Avalanche 2500 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Belts and Hoses and more.

What is your return policy for Chevrolet Avalanche 2500 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Chevrolet Avalanche 2500 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2004 Chevrolet Avalanche 2500 Belts and Hoses

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Dorman – Engine Oil Cooler Line (Part No.625-303)

Dorman – Heater Hose Connector (Part No.800-916)

Dorman – Heater Hose Connector (Part No.800-414CD)

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (Part No.5040398)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060950HD)

GM Genuine Parts – Fuel Feed Hose (Part No.10381608)

GM Genuine Parts – Fuel Feed Pipe O-Ring (Part No.217-452)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900027A)

Dorman – Engine Fuel Line (Part No.904-008)

Gates – Premium Molded Heater Hose (Part No.19802)

Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28410)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89323)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999123A)

Gates – Premium Molded Heater Hose (Part No.18622)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Dorman – Molded Heater Hose: Rubber (Part No.626-557)

Dorman – Idler Pulley (Pulley only) (Part No.419-603)

Autotecnica – Accessory Belt Idler Pulley (Part No.GM1413162)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38001)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.47" Diameter (Part No.D72194)

Gates – Premium Modular Coolant Hose (Part No.22927)

Dorman – Windshield Washer Hose (Part No.924-251)

Dorman – Wiper Hose (Part No.924-379)

Driveworks – Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (Part No.398K4)

Dayco – Poly Rib Belt Serpentine Belt; 39.76 Long, 4 Rib Count (Part No.5040398)

Dayco – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.5060950)

Dayco – Poly Rib Belt Serpentine Belt; 96.06 Long, 6 Rib Count (Part No.5060960)

Driveworks – Poly Rib Belt Serpentine Belt; 95.08 Long, 6 Rib Count (Part No.950K6)

Driveworks – Poly Rib Belt Serpentine Belt; 96.06 Long, 6 Rib Count (Part No.960K6)

Gates – Micro-V Serpentine Drive Belt (Part No.K060956)

Yukon Gear – Seal Puller Tool (Part No.56063)

Gates – Micro-V Serpentine Drive Belt (Part No.K060950)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060950HD)

Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K060956HD)

Dayco – Molded Heater Hose; EPDM Rubber, 7/8 Inch Diameter, 4 1/2 Inch Length (Part No.88445)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 12" Long, 1.47" Diameter (Part No.D72194)

Gates – Premium Modular Coolant Hose (Part No.22927)

Gates – Premium Molded Heater Hose (Part No.19802)

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)

Dayco – Automatic Belt Tensioner, Dayco (Part No.89324)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999129A)

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89323)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999123A)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (Part No.800-409)

Dorman – Heater Hose Connector- Coolant Connector (Part No.800-414)

Dorman – Heater Hose Connector (Part No.800-414CD)

Dorman – Heater Hose Connector (Part No.800-413CD)

Dorman – Molded Heater Hose: Rubber (Part No.626-557)

Dayco – Straight Heater Hose; EPDM Rubber, 5/8 Inch Diameter (sold by foot) (Part No.80271)

Dorman – Heater Hose Connector (Part No.800-916)

Gates – Quick-Lok Heater Hose Connector (Part No.28500)

Dorman – Coolant HVAC Connector (Part No.800-917)

Dorman – Coolant Connector – Inlet/Outlet 3/4In. Tube x 5/8In. Hose (OE Fix) (Part No.800-409HP)

Dorman – Cooling Quick Connector (Part No.800-413)

Gates – Premium Molded Heater Hose (Part No.18622)

Dorman – Metal Heater Hose Connector (OE Fix) (Part No.800-413HP)

Dorman – Metal Heater Hose Connector (OE Fix) (Part No.800-414HP)

Dayco – Idler Pulley, Dayco (Part No.89006)

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 90mm Diameter (Part No.900052A)

Dayco – Idler Pulley, Dayco (Part No.89009)

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 76mm Diameter (Part No.900027A)

Dayco – Idler Pulley, Dayco (Part No.89135)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Litens – Idler Pulley: Direct Fit, Steel, 90mm Diameter, w/ Hardware (Part No.900401A)

Gates – DriveAlign Belt Drive Idler/Tensioner Pulley (Part No.38009)

Dorman – Idler Pulley (Pulley only) (Part No.419-603)