2004 BMW 545i Exhaust Parts
Find Your Specific 2004 BMW 545i Exhaust Parts
Below you will find various in-demand BMW Exhaust Parts, components and accessories for your 2004 545i. Advance Auto Parts has popular 545i parts like Exhaust Gaskets, Catalytic Converters, Exhaust Manifold and Headers and more. You’ll also find aftermarket and OEM Exhaust Parts for other 545i model years including
2005 and more. Select a category of 2004 BMW 545i Exhaust Parts below and start saving instantly.
Popular 2004 BMW 545i Exhaust Parts Categories
Essential Exhaust Parts for 2004 BMW 545is
Rein – Exhaust Clamp (Part No.H8020331885RIN)
from
$28.87
Exhaust Clamp
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49789)
from
$1140.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49789. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49790)
from
$1067.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49790. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50400)
from
$1085.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50400. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50401)
from
$1016.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50401. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452790)
from
$1222.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452790. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452789)
from
$1346.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452789. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-31834-01)
from
$44.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Meets or exceeds OE specifications
Elring – Exhaust Manifold Gas (Part No.A8111167112ELR)
from
$10.87
Exhaust Manifold Gas
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97274)
from
$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Newco – Nut (Part No.4D10011131NEW)
from
$1.36
Nut
Upgrade your 2004 BMW 545i with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2004 BMW 545i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Exhaust Parts are key to keeping your 545i functioning at its best. At Advance Auto Parts, we offer a wide selection of 12 Exhaust Parts for the 2004 BMW 545i, designed to meet your needs without breaking the bank.
From
Exhaust Gasket
replacements to
Catalytic Converters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2004 BMW 545i at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.36 to $1,346.99, with
an average price of $585.72.
Our 12 Exhaust Parts in stock come from 7 trusted brands, so you’re sure to find the right part for your 2004 BMW 545i without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2004 BMW 545i is always ready to roll. We’re committed to providing you with everything you need to keep your 545i in top shape, all in one place.
Start shopping confidently below for your 2004 BMW 545i!
Best-Selling Exhaust Gaskets for 2004 BMW 545is
Enhance the driving experience in your BMW with 3 quality Exhaust Gasket components, starting at $10.87.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97274)
from
$48.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-31834-01)
from
$44.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Meets or exceeds OE specifications
Elring – Exhaust Manifold Gas (Part No.A8111167112ELR)
from
$10.87
Exhaust Manifold Gas
Most Popular 2004 BMW 545i Catalytic Converters
Customize your BMW with 3 Catalytic Converters products
like Catalytic Converters and
Catalytic Converter Clamps, all
priced under $1,346.99.
Rein – Exhaust Clamp (Part No.H8020331885RIN)
from
$28.87
Exhaust Clamp
MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452789)
from
$1346.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452789. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452790)
from
$1222.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452790. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Top Picks for 2004 BMW 545i Exhaust Manifold and Headers
Upgrade BMW 545is with top-quality Exhaust Manifold and Headers parts, including 4 OEM and aftermarket selections for your 2004 model.
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49789)
from
$1140.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49789. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50400)
from
$1085.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50400. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 555 and 18 40 7 522 571. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49790)
from
$1067.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49790. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50401)
from
$1016.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50401. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 645Ci, 2004-2005 BMW 545i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 522 554 and 18 40 7 522 570. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
In-Demand Exhaust Hardware for 2004 BMW 545is
Select from 1 premium Exhaust Hardware parts for your 2004 BMW 545i.
Newco – Nut (Part No.4D10011131NEW)
from
$1.36
Nut
Most Sold 2004 BMW 545i Exhaust Hangers
Explore our best-selling BMW parts for the 2004 545i among 1 OEM and aftermarket options starting from $11.57.
HJS – Exhaust Hanger (Part No.H8050503487HJS)
from
$11.57
Exhaust Hanger
FAQs for 2004 BMW 545i Exhaust Parts
Which Exhaust Parts are best-sellers for 2004 BMW 545is?
Out of 12 Exhaust Parts that fit 2004 BMW 545is, the following parts are the top sellers:
- Exhaust Clamp (12065033) – $28.87
- Exhaust Manifold Gasket Set (11138828) – $48.99
- Exhaust Manifold Gasket Set (12548138) – $44.99
What’s the price range for 2004 BMW 545i Exhaust Parts?
Exhaust Part prices for the 2004 BMW 545i start at $1.36 and go up to $1,346.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2004 BMW 545i?
The average price for Exhaust Parts for the 2004 BMW 545i is $585.72. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other BMW 545i model years?
Yes, we currently carry Exhaust Parts for 1 model years of BMW 545is between 2005 and 2005. Exhaust Parts are bought most frequently for the following model years: 2005.
What are the cheapest Exhaust Parts for my 2004 BMW 545i?
The cheapest 2004 BMW 545i Exhaust Parts we carry in stock are:
- Nut (11837234) – $1.36
- Exhaust Manifold Gas (12073286) – $10.87
- Exhaust Hanger (12503834) – $11.57
- Exhaust Clamp (12065033) – $28.87
- Exhaust Manifold Gasket Set (12548138) – $44.99
What types of Exhaust Parts do you sell for my 2004 BMW 545i?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2004 BMW 545i:
Can I get help with 2004 BMW 545i Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Exhaust Parts and more.
What is your return policy for BMW 545i Exhaust Parts?
Advance Auto Parts keeps returns simple. For new BMW 545i Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
