2004 BMW 530i Exhaust Parts

Essential Exhaust Parts for 2004 BMW 530is

MagnaFlow – Standard Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.94005)

Standard Grade Federal / EPA Compliant Universal Catalytic Converter

from

$147.99
MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 94005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.

Product Features:
  • Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
  • Compact, lightweight construction enables installation in confined areas, welding is required.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452431)

California Grade CARB Compliant Manifold Catalytic Converter

from

$1168.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452431. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2003 BMW 530i and 2001-2003 BMW 525i, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 514 499 and 18 40 7 507 348, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Flowmaster Inc. – Catalytic Converter – Universal – 222 Series – 2.00 in. Inlet/Outlet – 49 State (Part No.2220120)

Catalytic Converter - Universal - 222 Series - 2.00 in. Inlet/Outlet - 49 State

from

$131.99
Flowmaster 49-state universal catalytic converters are designed to meet federal EPA emissions requirements on a wide variety of applications. These high quality catalytic converters are manufactured in the USA, and feature stainless steel outer shell construction for maximum durability. The internal substrate material and precious metal loading have been carefully engineered for maximum efficiency and to avoid MIL (Malfunction Indicator Lamp) code issues that are common with lower quality converters. Universal catalytic converters require welding and/or fabrication and should be installed by qualified technicians. Please refer to the Flowmaster application guide for specific part number/vehicle applications. Flowmaster 49-state converters are not legal for sale or use on vehicles licensed or operated in the state of California.

Product Features:
  • Excellent flow characteristics
  • Engineered to keep the “MIL” light off
  • Available for a wide variety of applications
  • Stainless steel construction
  • Made in the USA
See More

BRExhaust – Exhaust Hanger (Part No.255-766)

Exhaust Hanger

from

$7.49
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • OE-style design for quality fit
  • Secure sealing for superior durability
  • Manufactured from quality materials to ensure maximum durability
  • Reduced vibration
See More

Vaico – Muffler Hanger (Part No.H8052168475VCO)

Muffler Hanger

from

$21.46
Choosing from the comprehensive VIEROL product range means opting for outstanding quality. This is confirmed by the Q+ quality seal for parts in OEM quality MADE IN GERMANY. VIEROL AG is a leading automotive parts distributor located in Oldenburg, Germany. With the trademarks VAICO and VEMO are the service market leaders in more than 125 countries worldwide. As an internationally present automotive supplier, VIEROL AG specializes in electronic and electrical components for German and European vehicles. VIEROL AG quality brands VEMO and VAICO combine innovation and experience, technical expertise and practiced corporate values, commitment to precision and a passion for technology: the invisible, but unquestionable, optimal prerequisites for guaranteed product quality and globally recognized service. Choosing from the comprehensive VIEROL product range means opting for outstanding quality.
See More

CRP – Exhaust Hanger (Part No.H805014328CRP)

Exhaust Hanger

from

$4.92
Exhaust Hanger

HJS – Exhaust Clamp (Part No.H8020335017HJS)

Exhaust Clamp

from

$46.62
Exhaust Clamp

Rein – 50X95 Dual Clamp (Part No.EXC0022)

50X95 Dual Clamp

from

$18.99
Rein exhaust clamps are direct-fit OE replacements designed and manufactured to exact standards. Clamps come complete with bolts and hardware to ensure proper fit and function.

Product Features:
  • Rein exhaust clamps are designed as direct-fit replacements to ensure trouble-free proper installation.
  • Rein exhaust clamps come complete with bolts and hardware when necessary for installation to save installation time and additional costs.
  • Replace leaking, damaged or noisy exhaust clamps with Rein premium components to restore your vehicle to safe and optimal performance levels.
  • Replace worn-out exhaust clamps to prevent damage to costly catalytic converters and other exhaust components.
See More

CRP – Exhaust Clamp (Part No.H8020570170CRP)

Exhaust Clamp

from

$29.87
Exhaust Clamp

Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-31834-01)

Exhaust Manifold Gasket Set

from

$44.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Meets or exceeds OE specifications
See More

Felpro – Exhaust Manifold Gasket Set (Part No.MS 97283)

Exhaust Manifold Gasket Set

from

$37.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
  • Contains all gaskets and seals to remove and replace exhaust manifold
  • Contains all gaskets and seals to remove and replace exhaust manifold
See More

Victor Reinz – Exhaust Manifold Gasket Set (Part No.15-34834-01)

Exhaust Manifold Gasket Set

from

$59.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

MAHLE Original – Exhaust Pipe Gasket (Part No.F31980)

Exhaust Pipe Gasket

from

$13.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-27467-00)

Exhaust Pipe Flange Gasket

from

$4.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-34046-00)

Exhaust Pipe Flange Gasket

from

$17.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Newco – Nut (Part No.4D10011131NEW)

Nut

from

$1.36
Nut

CRP – Exhaust Nut (Part No.H1001417721CRP)

Exhaust Nut

from

$2.09
Exhaust Nut

Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)

Terminator; Exhaust Tips

from

$85.99


Product Features:
  • Show Quality Chrome Platinum
  • Durable Black Finish
  • Can Be Welded Or Clamped
  • Complete The System
  • Glass-Packed Resonators
See More

MAGNAFLOW – OEM Grade Direct Fit Catalytic Converter – EPA Federal Compliant (Part No.H3000957577MAG)

OEM Grade Direct Fit Catalytic Converter - EPA Federal Compliant

from

$1094.24
EPA Federal Compliant – Not Legal for sale or use in California. Legal in New York and Maine on EPA Federal Emission Equipped Vehicles only. OEM Grade is for use with California Emmision Equipped vehicles outside the State of California, New York and Maine. MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured. MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

Product Features:
  • Stainless steel construction
  • Direct-Fit; No welding or cutting
  • Ceramic and Metallic substrates
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49772)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$891.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49772. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2006 BMW X5, 2001-2003 BMW 530i, and more, this direct-fit catalytic converter also interchanges with OE parts 18 40 7 514 498 and 18 40 7 507 347, among others. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452298)

California Grade CARB Compliant Manifold Catalytic Converter

from

$1132.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452298. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 904. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49770)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1515.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49770. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 903. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50297)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1212.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50297. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 903. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Rein – STOVR FLAN NUT M7/GA (Part No.HWN0101)

STOVR FLAN NUT M7/GA

from

$2.99
STOVR FLAN NUT M7/GA

Upgrade your 2004 BMW 530i with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2004 BMW 530i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Exhaust Parts are key to keeping your 530i functioning at its best. At Advance Auto Parts, we offer a wide selection of 19 Exhaust Parts for the 2004 BMW 530i, designed to meet your needs without breaking the bank. From Exhaust Pipe replacements to Exhaust Hangers upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2004 BMW 530i at great prices. Our Exhaust Parts inventory for this model ranges from just $1.36 to $1,515.99, with an average price of $376.29. Our 19 Exhaust Parts in stock come from 11 trusted brands, so you’re sure to find the right part for your 2004 BMW 530i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2004 BMW 530i, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO Mahle, and more. FELPRO Exhaust Parts start at just $4.99 and boast an impressive 5 stars average rating from customers. With 4 customer reviews and counting, our 2004 BMW 530i Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2004 BMW 530i is always ready to roll. We’re committed to providing you with everything you need to keep your 530i in top shape, all in one place. Start shopping confidently below for your 2004 BMW 530i!

Best-Selling Exhaust Pipes for 2004 BMW 530is

Enhance the driving experience in your BMW with 4 quality Exhaust Pipe components, starting at $4.99.

MAHLE Original – Exhaust Pipe Gasket (Part No.F31980)

Exhaust Pipe Gasket

from

$13.99
MAHLE® gaskets provide world class sealing products trusted by OEMs & Technicians around the globe.

Product Features:
  • All MAHLE gaskets meet or exceed the original equipment specifications providing the finest sealing products available
  • MAHLE gaskets utilizes OE equivalent or better materials in all our gaskets
  • Exhaust pipe gaskets from MAHLE Original are manufactured with the best materials to withstand high temperature applications.
  • The contents of MAHLE gaskets are packaged in shrink wrapped tray, giving you the added security of knowing that you have the right parts, prior to opening the package
See More

AP Exhaust – Exhaust Pipe Gasket (Part No.H40062393211APE)

Exhaust Pipe Gasket

from

$13.98
Exhaust Pipe Gasket

Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-34046-00)

Exhaust Pipe Flange Gasket

from

$17.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Felpro – COLLECTOR GASKET (Part No.61900)

COLLECTOR GASKET

from

$4.99
COLLECTOR GASKET

Most Popular 2004 BMW 530i Exhaust Hangers

Customize your BMW with 1 Exhaust Hangers products like Exhaust Hangers and Hardware, all priced under $11.57.

HJS – Exhaust Hanger (Part No.H8050503487HJS)

Exhaust Hanger

from

$11.57
Exhaust Hanger

Top Picks for 2004 BMW 530i Catalytic Converters

Upgrade BMW 530is with top-quality Catalytic Converters parts, including 3 OEM and aftermarket selections for your 2004 model.

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49771)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1334.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49771. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 904. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-898)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$781.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Manifold Converter – Not Carb Compliant – Not For Sale – NY – CA – ME (Part No.674-897)

Manifold Converter - Not Carb Compliant - Not For Sale - NY - CA - ME

from

$781.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

In-Demand Exhaust Manifold and Headers for 2004 BMW 530is

Select from 4 premium Exhaust Manifold and Headers parts for your 2004 BMW 530i, with prices ranging from $2.99 to $1,515.99.

MagnaFlow – OEM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.49770)

OEM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1515.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49770. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 903. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50297)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1212.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50297. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 903. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – California Grade CARB Compliant Manifold Catalytic Converter (Part No.452298)

California Grade CARB Compliant Manifold Catalytic Converter

from

$1132.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 452298. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2004-2005 BMW 530i and 2004-2005 BMW 525i, this direct-fit catalytic converter also interchanges with OE part 18 40 7 523 904. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Rein – STOVR FLAN NUT M7/GA (Part No.HWN0101)

STOVR FLAN NUT M7/GA

from

$2.99
STOVR FLAN NUT M7/GA

Most Sold 2004 BMW 530i Exhaust Fittings

Explore our best-selling BMW parts for the 2004 530i among 2 OEM and aftermarket options starting from $49.42.

Dorman – Exhaust Pipe Clamp (Part No.904-098)

Exhaust Pipe Clamp

from

$63.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.

Product Features:
  • Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
  • Ideal solution – engineered to help ensure secure connections between exhaust system components.
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

HJS – Exhaust Clamp (Part No.H8020453829HJS)

Exhaust Clamp

from

$49.42
Exhaust Clamp

Top-Rated Exhaust Parts Brands For Your 2004 BMW 530i

Shop for the best-rated brands offering Exhaust Parts and other products for your 2004 BMW 530is. Below you’ll find some of our best rated Exhaust Parts from FELPRO and Mahle, and more. Exhaust Parts from these brands that fit a 2004 530i start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2004 BMW 530i Exhaust Parts

When it comes to maintaining or upgrading your 2004 BMW 530i, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2004 BMW 530i. With over 2 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $4.99, with an average price of just $33.99. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

EXHAUST MANIFOLD GASKET SET
from
$62.99

(1)

EXHAUST MANIFOLD GASKET SET

“As good as OEM for a fraction of the cost.”

COLLECTOR GASKET
from
$4.99
This product is not rated

COLLECTOR GASKET

“”

Popular Mahle 2004 BMW 530i Exhaust Parts

Mahle auto parts is one of the highest quality Exhaust Part brands in the market. Any 2004 BMW 530i owner should feel confident when installing genuine Mahle parts in their vehicle. To ensure the best fit and performance for your 2004 530i, Advance Auto Parts carries a full inventory of 1 Mahle Exhaust Parts. Plus you will be keeping your BMW in peak condition while saving money because prices on these Mahle Exhaust Parts range up to $13.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust Pipe Gasket
from
$13.99

(3)

Exhaust Pipe Gasket

“Perfect fit, sealed great”

FAQs for 2004 BMW 530i Exhaust Parts

Which Exhaust Parts are best-sellers for 2004 BMW 530is?

Out of 19 Exhaust Parts that fit 2004 BMW 530is, the following parts are the top sellers:

What’s the price range for 2004 BMW 530i Exhaust Parts?

Exhaust Part prices for the 2004 BMW 530i start at $1.36 and go up to $1,515.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2004 BMW 530i?

The average price for Exhaust Parts for the 2004 BMW 530i is $376.29. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other BMW 530i model years?

Yes, we currently carry Exhaust Parts for 19 model years of BMW 530is between 1975 and 2023. Exhaust Parts are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2007, and 2006.

What are the cheapest Exhaust Parts for my 2004 BMW 530i?

The cheapest 2004 BMW 530i Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 2004 BMW 530i?

Out of 4 reviews by customers, our 2004 BMW 530i Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2004 BMW 530i and their top-rated products:

What types of Exhaust Parts do you sell for my 2004 BMW 530i?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2004 BMW 530i:

Can I get help with 2004 BMW 530i Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Exhaust Parts and more.

What is your return policy for BMW 530i Exhaust Parts?

Advance Auto Parts keeps returns simple. For new BMW 530i Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.