2004 BMW 325i Performance and Racing Products
More 2004 BMW 325i Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 2004 BMW 325i, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 2004 BMW 325i Performance and Racing Products
K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Million Mile Air Filter (Part No.57I-1001)
from
$399.99
K&N 57i Generation II Induction Kits are built primarily for European vehicles. These intake kits use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter alone. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. 57i Intakes are not legal for use in California and other US States adopting California emission standards.
Product Features:
See More
Product Features:
- GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
- IMPROVED ENGINE SOUND: Hear the power under the hood.
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 20 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-12392)
from
$379.99
This air intake system produces up to +20 hp, 25 lbs. x ft. torque and out-flows the factory intake by 80%. Included in this system is a washable/reusable oiled conical air filter that uses five layers of progressive weave media for maximum air flow. The filter is constructed with 100% polyurethane for a long life and multiple cleaning cycles. This intake system also features a roto-molded tube that replaces the stock intake tract and directs increased air flow with improved volumetric efficiency for maximum performance. This intake system incorporates a unique coupling that smoothens the air transition into the intake tract, and also allows this kit to fit on both US and EURO Mass Air Flow Sensors. A one-piece black powder-coated heat shield requires little to no assembly for a hassle free installation.
Product Features:
See More
Product Features:
- Out Produces Factory Intake By 80%
- Produces An Astonishing 20 HP And 25 ft./lbs. Torque
- Includes A Durable 18 Gauge; Powder coat Heat Shield
- CAD-Designed Roto-Molded Intake Tube
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-20442)
from
$379.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses 360 deg. Radial Flow Air Filter
- Non-Oiled
- Seamless Integration w/Stock Air Inlet
- Washable And Reusable
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-81012-C)
from
$455.99
This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56. This sealed air intake system features a washable/reusable 6 inch conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100 polyurethane for long life and multiple cleaning cycles. The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity
Product Features:
See More
Product Features:
- Uses Pro 5R Air Filter For Maximum Air Flow
- Rotomolded Plastic Tube
- 56% cfm Flow Gain
- Improved Throttle Response
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-20442)
from
$379.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.
Product Features:
See More
Product Features:
- Uses 360 deg. Radial Flow Air Filter
- 5 Layer Cotton Gauze Media
- Seamless Integration w/Stock Air Inlet
- Washable And Reusable
aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 12 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-81012-C)
from
$455.99
The aFe Stage 2 cold air intake system produces up to 10HP and 12lbs. x ft. torque while outflowing the factory intake by up to 20. This intake includes a highly engineered heatshielded housing with a one-piece intake tube. Handling filter duties is the five layered, progressively finer mesh cotton gauze, oiled Pro 5R washable/reusable, 360 degree inverted top radial flow air filter that provides maximum filtration and high flow. The polished aluminum intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T). Utilizing factory mounting points, this system provides a hassle free installation.
Product Features:
See More
Product Features:
- Uses Pro DRY S Air Filter For Maximum Air Flow
- Rotomolded Plastic Tube
- 56% cfm Flow Gain
- Improved Throttle Response
Popular 2004 BMW 325i Performance and Racing Products Categories
2004 BMW 325i Performance and Racing Products
You count on your 2004 BMW 325i to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 2 Performance and Racing Products priced around $379.99, you’re sure to find everything you need for your 2004 BMW 325i.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 1 different brands like aFe POWER. 2004 BMW 325i Performance and Racing Products start as low as $379.99!
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2004 BMW 325i below to get started!
FAQs for 2004 BMW 325i Performance and Racing Products
What are the most purchased Performance and Racing Products for the 2004 BMW 325i?
Out of 2 Performance and Racing Products for the 2004 BMW 325i, the most popular in our inventory are:
from
$379.99
This product is not rated
Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Oiled Air Filter For Maximum Airflow
Engine Cold Air Intakes
from
$379.99
This product is not rated
Magnum FORCE Cold Air Intake: Gain up to 6 Horsepower! Dry Air Filter For Easy Maintenance
Engine Cold Air Intakes
