2004 BMW 325Ci Brake Parts

Essential 2004 BMW 325Ci Brake Parts

Cardone – Brake Master Cylinder Bleeding Tool (Part No.10-5000MCB)

Brake Master Cylinder Bleeding Tool

from

$15.99
CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:
  • Each unit is 100% new, providing consistent performance when servicing your brake system
  • Easy to transfer for on-the-spot master cylinder bleeding
  • Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
  • Easy to clean to ensure no cross contamination
  • Durability for long lasting performance
See More

ATE – Anti Rattle Spring / Clip (Part No.N106978361ATE)

Anti Rattle Spring / Clip

from

$6.30
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Premium – Semi Loaded Disc Brake Caliper with Bracket (Part No.19-B1618A)

Semi Loaded Disc Brake Caliper with Bracket

from

$61.99
Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • Meets or exceeds original equipment specifications for performance and durability
  • OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
  • Application-specific caliper bodies for easy installation
  • Brackets included where required, for complete system restoration
  • OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
  • 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
  • New bleeder screws, banjo bolts, and crush washers included for a complete repair
  • OE Style, stainless steel pad abutment hardware included
  • 100% end-of-line inspection and pressure testing ensures quality and performance
  • Caliper finish or coating may vary
See More

ATE – Brake Caliper Repair Kit (Part No.N1050155032ATE)

Brake Caliper Repair Kit

from

$11.44
ATE Disc Brake Caliper Repair Kit contains the components necessary for piston seal repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Guaranteed factory fit to original equipment specifications
  • Meets or exceeds original equipment factory safety standards
See More

Wearever – Remanufactured Brake Master Cylinder (Part No.11-3166)

Remanufactured Brake Master Cylinder

from

$94.99
Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:
  • Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
  • Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
  • Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
  • Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
  • Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
  • Plastic reservoirs are vacuum-tested to ensure they are leak free.
See More

ATE – Caliper Pin Boot Kit (Part No.N1042682356ATE)

Caliper Pin Boot Kit

from

$20.00
ATE Continental is further extending its range of Brake Caliper Pin Boot Kits for ATE brake calipers. ATE caliper Pin Boot Kits are an essential component of ATE-designed fist floating brake calipers. The floating caliper consists of a holder and housing, which is located in rubber damping pins and sleeves.

Product Features:
  • Reduced cost
  • OE Quality
  • Complete Kit
See More

Carquest Wearever – Parking Brake Shoes (Part No.S828)

Parking Brake Shoes

from

$35.99
Wearever brake shoes are 100% new OE replacement brake shoes and come with coated steel to guard against rust, salt and road grime. Wearever brake shoes provide exceptional stopping power, virtually noise free and exact fitment to the original equipment brake shoes.

Product Features:
  • Wearever Brake Shoes come bonded or riveted based on OE design.
  • Wearever Brake Shoes are coated to prevent rust.
  • Wearever Brake Shoes are 100% New not remanufactured.
  • Brand may vary by location
See More

Dorman – First Stop Disc Brake Caliper Repair Kit (Part No.N10501072202DOR)

First Stop Disc Brake Caliper Repair Kit

from

$6.01
Dorman’s Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:
  • Replacement restores disc brakes to proper operation
  • Replacement prevents uneven braking
  • Direct replacement for a proper fit
  • Manufactured to strict engineering quality standards
See More

Carquest Wearever – Brake Hose Assembly: Copper Washers Included (Part No.BHA380538)

Brake Hose Assembly: Copper Washers Included

from

$24.99
Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:
  • Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
  • Tensile minimum load holds up to 1800 N
  • All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
  • Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
  • Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
  • Brand may vary by location
See More

Carquest Standard – Brake Pads: Reliable and Dependable Stopping (Part No.NAD1228)

Brake Pads: Reliable and Dependable Stopping

from

$22.99
Carquest Standard brake pads are designed for original equipment (O.E.) fit, form and function for dependable stopping while providing great value. Our brake pads use quality friction formulas for reliable stopping power. Carquest Standard brake pads feature a single-layer shim that absorbs noise and vibration to provide quiet braking. These brake pads also utilize slots and chamfers based on the OE design. Carquest Standard brake pads are the right choice when looking for good performance at a great price.

Product Features:
  • Dependable stopping power
  • Single layer shim for quiet braking
  • OE-designed slots and chamfers to reduce noise and vibration
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA2085)

Multi Purpose Relay

from

$22.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

ATE – Anti Rattle Spring / Clip (Part No.N1069100105ATE)

Anti Rattle Spring / Clip

from

$12.21
Caliper housing spring retaining clips are an essential component of ATE-designed fist floating brake calipers. The fist floating caliper consists of a holder and housing, which is located in rubber damping sleeves. It slides within the holder together with the outer brake pad while as the pad wears. To prevent the housing from lifting off the pad and causing noise issues, the caliper is pulled against the brake pad by the caliper housing spring retaining clip. These clips are exposed to continuous corrosion attack and should therefore also be replaced each time the brake pads are changed.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

A.P.A. URO – Brake Pressure Switc (Part No.N3020382830APA)

Brake Pressure Switc

from

$218.89
Brake Pressure Switc

Dorman – Help – Oversized Brake Caliper Bolt (Part No.13894)

Oversized Brake Caliper Bolt

from

$25.49
This disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this disc brake caliper bolt kit is designed to precisely tighten into stripped holes to easily repair the brake caliper or knuckle on specified vehicles
  • Ideal solution – this kit provides is a reliable replacement for original hardware that has stripped
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Wearever – Disc Brake Caliper Guide Pin Boot Kit (Part No.8217A)

Disc Brake Caliper Guide Pin Boot Kit

from

$15.29
Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:
  • This part matches Original Equipment (OE) quality specifications
  • Easy and fast replacement
  • Prevents noise and premature wear
  • Provides longer brake life and performance
See More

PowerStop – Red Powder Coated Calipers (Part No.S2640A)

Red Powder Coated Calipers

from

$209.99
PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:
  • All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
  • New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
  • High temperature EPDM rubber for extended life.
  • Premium silicone lubrication provides smoother operation.
  • The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.
See More

ATE – Pneumatic Brake Booster (Part No.N4000325479ATE)

Pneumatic Brake Booster

from

$258.05
ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:
  • Original equipment (OE) quality
  • Wide range of single and tandem Brake Boosters
  • Unique tie-rod design meaning lighter and thinner parts for more efficient performance
  • Most units are made of steel, but lightweight aluminium versions are also available.
See More

Kayser – Brake Booster Vacuum (Part No.N4017319683KAY)

Brake Booster Vacuum

from

$106.59
Brake Booster Vacuum

Febi – Parking Brake Cable (Part No.N5010189180FEB)

Parking Brake Cable

from

$25.27
Parking Brake Cable

ATE – ATE Caliper Guide Pin Cover (Part No.N1046316132ATE)

ATE Caliper Guide Pin Cover

from

$1.85
The ATE Caliper Guide Pin Cover is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Carquest Wearever – Brake Rotor: Meets or Exceeds OE Specs (Part No.YH145469)

Brake Rotor: Meets or Exceeds OE Specs

from

$94.99
Carquest Premium rotors meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium rotors are manufactured with proper harmonic design and non-directional finish that eliminate noise and enhance pedal feel. Our rotors are designed to effectively dissipate heat, helping to eliminate brake fade and increase the life of your pads and rotors. Carquest Premium rotors are designed for long-lasting and quiet braking with superior performance.

Product Features:
  • Meets or exceeds OE design for superior stopping power
  • Exceeds ISO manufacturing guidelines (International Organization for Standardization)
  • Matches OE vane size for proper cooling
  • Optimal metallurgy and casting thickness to preventing warping
  • Air gap eliminates brake fade and increases pad life
  • Non-directional finish decreases break-in time.
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance (Part No.K871-26)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z26 Street Performance

from

$437.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z26 Street Warrior Brake Upgrade Kit is recommended for high performance, high horsepower muscle and modified cars. This kit comes with everything you need for easy installation, including pads, rotors and stainless-steel hardware. The Drilled & Slotted rotors and Carbon-Fiber Ceramic pads combine to provide shorter stops under the most demanding conditions. This PowerStop Z26 Street Warrior Brake Upgrade Kit is the affordable bolt-on upgrade that delivers more than just the braking power you need to rein in all those ponies. With our low-dust and low-noise formula, you’ll spend less time cleaning those wheels and more time enjoying what matters most – the drive.

Product Features:
  • This complete brake kit has been engineered to handle the increased demand of street-driven muscle cars and performance vehicles
  • Proprietary Carbon-Fiber Ceramic Z26 brake pads enhance heat dissipation versus a typical ceramic brake pad for better stopping power at high speed
  • Stainless-steel pad shims resist the increased temperatures common on high performance applications
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Drilled & Slotted performance rotors provide maximum cooling
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Brake rotor, pad & hardware engineered to work together to increase stopping power & enhance heat dissipation for your performance car
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Front & 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Wearever – Brake Pad Wear Sensor (Part No.084-1515)

Brake Pad Wear Sensor

from

$19.99
The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:
  • Triggers a warning light on the dashboard
  • Should be replaced each time the brake pad is replaced
  • Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable
See More

ATE – Brake Caliper Carrie (Part No.N1036758141ATE)

Brake Caliper Carrie

from

$110.69
Brake Caliper Carrie

PowerStop – Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver (Part No.K877)

Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver

from

$217.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

PowerStop – Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver with Calipers (Part No.KC871)

Front And Rear Carbon-Fiber Ceramic Disc Pad And Rotor: Brake Kit, Z23 Daily Driver with Calipers

from

$790.99
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:
  • This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
  • PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
  • All calipers are powder coated, assembled, and tested in our Chicago, IL facility
  • Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
  • Multi-Layer rubberized shims provide virtually noise-free braking
  • Drilled & Slotted performance rotors provide maximum cooling
  • Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
  • Bolt-on upgrade for stock brakes, no modifications necessary
  • Rotors are zinc plated for maximum protection against rust.
  • Includes 1 Front & 1 Rear Sensor Wire
  • Buy with confidence from the originator & industry leader of brake kits
See More

Carquest Premium Gold – Semi-Metallic Brake Pads – Rear (4-Pad Set) (Part No.GMKD396)

Semi-Metallic Brake Pads - Rear (4-Pad Set)

from

$57.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific friction formulations provide shorter stopping distances and extended pad life
  • Hardware included for most applications, provides better value and
  • OE-designed slots and chamfers to reduce noise and vibration
  • Multi-layer shim provides near silent braking
  • Powder-coated backing plate prevents corrosion
See More

Carquest Premium Gold – Brake Pad Set – Gold Semi-Metallic (Part No.GMKD763)

Brake Pad Set - Gold Semi-Metallic

from

$45.99
Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:
  • Application-specific formulations designed for extended pad life and clean wheels
  • Multi-layer shim for near silent braking
  • OE designed slots and chamfers for consistent performance
  • Hardware included on popular and late-model applications
See More

2004 BMW 325Ci Brake Parts

You count on your 2004 BMW 325Ci to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Brake Parts. With 82 Brake Parts ranging in price from $1.85 to $796.99, you’re sure to find everything you need for your 2004 BMW 325Ci.

Brands matter. If you want to shop a specific Brake Parts brand, we stock 19 different brands like Carquest, Cardone, and Carquest Premium. 2004 BMW 325Ci Brake Parts start as low as $1.85!

One of the best ways to find top quality OEM or aftermarket Brake Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 490 extensive product reviews on 2004 BMW 325Ci Brake Parts. Some of the top-rated Brake Parts products we carry are Brake Pads Without Hardware, Semi-Metallic, Long Pad Life, Quiet Braking with 4.3 stars and Ceramic Brake Pads – (4-Pad Set) with 4.7 stars.

Did we mention you can order your Brake Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Brake Parts inventory for your 2004 BMW 325Ci below to get started!

Top-Rated Brake Parts Brands For Your 2004 BMW 325Ci

Trusted Brake Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2004 BMW 325Ci running right for years to come. In our inventory you’ll find brands like Carquest, Cardone, Carquest Premium, and even more.

Popular Akebono Euro Brake Parts

You’ll find popular Akebono Euro brand products across Brake Pads and Shoes. All are waiting to get your 2004 BMW 325Ci back on the road. Some of the top-rated Akebono Euro products in these categories are:
Ceramic  Pads Ultra-Premium
from $67.99
(3)
Ceramic Pads Ultra-Premium
Front Brake Pads and Shoes
Ceramic  Pads Ultra-Premium
from $74.99
(1)
Ceramic Pads Ultra-Premium
Rear Brake Pads and Shoes

FAQs for 2004 BMW 325Ci Brake Parts

What are the most purchased Brake Parts for the 2004 BMW 325Ci?

Out of 82 Brake Parts for the 2004 BMW 325Ci, the most popular in our inventory are:
Brake Master Cylinder Bleeding Tool
from $15.99
(10)
Brake Master Cylinder Bleeding Tool
Brake Master Cylinder Bleeders
Oversized Brake Caliper Bolt
from $25.49
(40)
Oversized Brake Caliper Bolt
Brake Caliper Bolt and Pins
Semi-Metallic Brake Pads - (4-Pad Set)
from $59.99
(16)
Semi-Metallic Brake Pads – (4-Pad Set)
Front Brake Pads and Shoes

What are the top-rated 2004 BMW 325Ci Brake Parts?

Top-rated Brake Parts for your 2004 BMW 325Ci based on customer reviews/ratings are:
Brake Pads Without Hardware, Semi-Metallic, Long Pad Life, Quiet Braking
from $44.99
(49)
Brake Pads Without Hardware, Semi-Metallic, Long Pad Life, Quiet Braking
“Perfect fit and great price”
Ceramic Brake Pads - (4-Pad Set)
from $36.99
(15)
Ceramic Brake Pads – (4-Pad Set)
“Perfect fit and very little brake dust”
Brake Pad Wear Sensor
from $23.99
(9)
Brake Pad Wear Sensor
“fits”