2003 Volvo V70 Shocks and Struts

Essential 2003 Volvo V70 Shocks and Struts

Monroe – OESpectrum Strut (Part No.71485)

OESpectrum Strut

from

$168.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

Suncore – Complete Strut Assem (Part No.55S11492)

Complete Strut Assem

from

$144.99
Complete Strut Assem

MTC – Strut Brace (Part No.L3032273334MTC)

Strut Brace

from

$24.05
Strut Brace

MOOG – Strut Bellows (Part No.K90462)

Strut Bellows

from

$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Construction and design validated by MOOG engineers
  • Engineered to meet or exceed OE requirements
  • Incorporates proven design and engineering features
See More

KYB – Jounce Bumper and Bellows (Part No.SB103)

Jounce Bumper and Bellows

from

$31.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

APA/URO Parts – Strut Spacer (Part No.L3039387110APA)

Strut Spacer

from

$9.43
APA/URO Strut Spacer are made of high-quality OE materials for long life. They help improve strut assembly operation by increasing damping and restoring smooth steering ability.

Product Features:
  • Reduces suspension, road noises and vibrations
  • Mount bearings provide smoother steering and help retain front end alignment
  • Are built with design and quality that matches or exceeds OE quality
See More

MTC – STRUT SPACER (Part No.L3039411417MTC)

STRUT SPACER

from

$12.64
MTC Strut Spacer are made of high-quality OE materials for long life. They help improve strut assembly operation by increasing damping and restoring smooth steering ability.

Product Features:
  • Reduces suspension, road noises and vibrations
  • Mount bearings provide smoother steering and help retain front end alignment
  • Are built with design and quality that matches or exceeds OE quality
See More

KYB – STRUT BELLOW (Part No.L303734949KYB)

STRUT BELLOW

from

$31.53
STRUT BELLOW

KYB – Jounce Bumper and Bellows (Part No.SB110)

Jounce Bumper and Bellows

from

$25.49
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.

Product Features:
  • Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
  • Poly Foam Bumper Prevents The Strut From Bottoming Out
  • Built With Design And Quality That Matches Or Exceeds One
  • Protects The Upper Seal And Bushing
See More

Driveworks – Strut Bellow (Part No.DW-K90462)

Strut Bellow

from

$6.99
Driveworks Shock Mount, Suspension Strut Bellows

Product Features:
  • Designed to meet or exceeds OE performance specifications
  • Durable neoprene rubber
See More

MTC – Bolt (Part No.Y2001849336MTC)

Bolt

from

$5.42
Bolt

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5975)

OESpectrum Passenger Car Shock Absorber

from

$81.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

KYB – Gas-a-Just Shock Absorber (Part No.L4000449535KYB)

Gas-a-Just Shock Absorber

from

$119.20
The KYB Gas-a-Just shock absorber is engineered to significantly increase vehicle stability, handling and performance. Significantly increases vehicle stability, handling, and control over twin-tube designs. The KYB Gas-a-Just shock absorber is a more responsive mono-tube design that automatically adjusts to driving conditions and is an ideal upgrade from an OE twin-tube design.

Product Features:
  • Direct fit application for ease of installation
  • Gas-a-Just is the replacement for an OE monotube shock
  • Ideal as an upgrade from an OE twin-tube
  • The more responsive monotube design automatically adjusts to driving conditions
  • Applications for cars, trucks, vans, and SUVs
See More

Monroe – OESpectrum Electronic Shock Absorber (Part No.C1513)

OESpectrum Electronic Shock Absorber

from

$446.99
Monroe® OESpectrum® shock absorbers are engineered specifically for foreign nameplate vehicles and feature the latest global original equipment valving technologies. Developed through years of research and on-vehicle testing, Monroe® OESpectrum® units provide an unprecedented level of handling precision and control while filtering out the ride harshness commonly encountered on many foreign nameplate applications. This unique blend of control and comfort is made possible through Tenneco’s ‘Twin Technology Active Control System’, an exclusive internal damping control technology first developed for leading global vehicle manufacturers. Tenneco’s Twin Technology consists of its latest Impact Control Valve (ICV), which delivers exceptional control under virtually all driving conditions, and a patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.

Product Features:
  • All Weather Fluid: Contains special modifiers to reduce friction and ensure smooth rod reaction.
  • Full Displaced Valving: Tuned specifically for each application, this valving automatically adjusts to road extremes to provide consistency and ride
  • Fluon Banded Piston: The fluon band provides consistent sealing between the piston and pressure tube which delivers better control and increased durability.
  • 1-3/16 inch Bore: Larger bore than most shocks to provide more efficient and consistent control
  • Twin Technology: Impact Control Valve (ICV), delivers exceptional control under virtually all driving conditions, and patented Low Speed Tunability (LST) piston design that isolates impact-related noise, vibration and harshness.
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Sachs – Suspension TwinTube Shock Absorber (Part No.L4000237975SAC)

Suspension TwinTube Shock Absorber

from

$180.68
SACHS Shocks and Struts are intelligently engineered to restore original handling dynamics while designed to meet the highest safety, comfort, performance and quality standards. SACHS products have the best dampening characteristics with an application-tuned valve pairing longevity with superior comfort and control for vehicles in any road condition.

Product Features:
  • TwinTube Design
See More

Monroe – Strut-Mate Strut Mounting Kit (Part No.L3033570309MNR)

Strut-Mate Strut Mounting Kit

from

$82.00
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include:

Product Features:
  • Strut Mount
  • Bearing
  • Upper Spring Isolator
  • Lower Spring Isolator
  • Upper Spring Seat
See More

TRW – Shock Mount Insulator (Part No.L4014420299TRW)

Shock Mount Insulator

from

$57.80
The TRW shock mount insulator is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • OE style mounts and fasteners
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Professional Parts Sweden – Shock Mount Insulator (Part No.L4014574354PPS)

Shock Mount Insulator

from

$29.37
The Professional Parts Sweden shock mount Insulator is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • OE style mounts and fasteners
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Hutchinson – Hutchinson Shock Mount (Part No.L401097548HUT)

Hutchinson Shock Mount

from

$43.80
The Hutchinson range of shock mounts includes products manufactured from natural rubbers which incorporate specially designed metal work to ensure complete confidence in the product strength. This has been supported by extensive testing, giving designers a solution with one of the highest deflection capabilities available for its size.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Febi – Strut Bellows / Dust Boot (Part No.L3037238073FEB)

Strut Bellows / Dust Boot

from

$9.82
The Febi Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure.

Product Features:
  • Made from premium quality cellular polyurethane
  • Manufactured with design and quality that matches or exceeds OE quality
  • Resistant to oil and other contaminants
See More

APA/URO Parts – Strut Bump Stop (Part No.L3036237995APA)

Strut Bump Stop

from

$11.49
APA/URO superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style struts
  • Are built with design and quality that matches or exceeds OE quality
See More

Professional Parts Sweden – Strut Bumper (Part No.L3036237995PPS)

Strut Bumper

from

$11.49
Strut Bumper

Professional Parts Sweden – Strut Bumper (Part No.L3036435891PPS)

Strut Bumper

from

$12.25
Professional Parts Sweden’s superior quality Bump Stop prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life.

Product Features:
  • Made from premium quality cellular polyurethane
  • Perfectly compliment OE style struts
  • Are built with design and quality that matches or exceeds OE quality
See More

KYB – STRUT MOUNT (Part No.L3030286222KYB)

STRUT MOUNT

from

$133.35
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:
  • The highest quality replacement strut mount available
  • Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
  • Superior rubber reduces noise, vibration and harshness
  • Mount bearings provide smoother steering and help retain front end alignment
  • Matched grade studs and nuts
See More

Rein – Strut Mount (Part No.AVQ0600)

Strut Mount

from

$16.29
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein automotive anti-vibration parts are application specific and match the design and function of the OE parts.

Product Features:
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
  • High corrosion resistance
See More

Lemfoerder – Strut Mounting Kit (Part No.L30333315276LEM)

Strut Mounting Kit

from

$91.30
Strut Mounting Kit

FEQ – Strut Mount (Part No.L3030420544FEQ)

Strut Mount

from

$41.79
The FEQ strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

MTC – Strut Mount (Part No.L3030392113MTC)

Strut Mount

from

$47.46
The MTC strut mount is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Pivot for the steering mechanism, providing a smooth steering response
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

2003 Volvo V70 Shocks and Struts

Maybe you’re in the middle of a full rebuild of that 2003 Volvo V70. Maybe you just need a couple of Shocks and Struts. Either way, Advance Auto Parts has 22 different Shocks and Struts in our inventory ranging from $5.42 to $269.99. That means you can find the exact parts or products you need to keep that 2003 Volvo V70 running smoothly.

Shocks and Struts are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Volvo V70. Driveworks, KYB, and Moog are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Shocks and Struts for your 2003 Volvo V70, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Shocks and Struts to keep your 2003 Volvo V70 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Shocks and Struts Brands To Make Your 2003 Volvo V70 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Volvo V70 demands trusted brand parts and products to keep it running. Many trusted brands of Shocks and Struts make up Advance Auto Parts’ inventory, and all are ready to help make your V70 the best it can be. Be sure to browse some of our top Shocks and Struts brands and parts.

Popular Driveworks Shocks and Struts

We carry Driveworks parts in our stock across Strut Bellows categories, plus more. For a 2003 Volvo V70, our most popular Driveworks Shocks and Struts include:
Strut Bellow
from $6.99
(7)
Strut Bellow
Strut Bellows

Top 2003 Volvo V70 Shocks and Struts from Monroe

Monroe products are another trusted brand when it comes to Shocks and Struts for your 2003 Volvo V70. Popular Monroe parts include:
OESpectrum Monotube Shock Absorber
from $120.99
(6)
OESpectrum Monotube Shock Absorber
Rear Shock and Struts
OESpectrum Strut
from $168.99
(5)
OESpectrum Strut
Front Shock and Struts

FAQs for 2003 Volvo V70 Shocks and Struts

What are the most purchased Shocks and Struts for the 2003 Volvo V70?

Out of 22 Shocks and Struts for the 2003 Volvo V70, the most popular in our inventory are:
Jounce Bumper and Bellows
from $31.49
(9)
Jounce Bumper and Bellows
Shock Boots, Levelers, and Accessories
Strut Bellows
from $35.99
(5)
Strut Bellows
Shock Boots, Levelers, and Accessories
Quick Strut Kit
from $269.99
(1)
Quick Strut Kit
Front Shock and Struts