2003 Volvo S40 Belts and Hoses

Below you will find various in-demand Volvo Belts and Hoses, components and accessories for your 2003 S40. Advance Auto Parts has popular S40 parts like Belt Tensioners, Heater Hoses, Pulleys and more. You’ll also find aftermarket and OEM Belts and Hoses for other S40 model years including 2002, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 and more. Select a category of 2003 Volvo S40 Belts and Hoses below and start saving instantly.

Popular 2003 Volvo S40 Belts and Hoses Categories

Serpentine Belts

Belt Tensioner Assemblies

Idler Pulleys

Belt Tensioner Pulleys

Engine Oil Cooler Hoses

Drive Belt Idler Assemblies

Essential Belts and Hoses for 2003 Volvo S40s

from

$87.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$31.56

Oil Cooler Hose

from

$24.78

The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.

from

$16.53

All ContiTech V-Belts are quiet, OE-quality and virtually service free. The only time these belts require attention is during installation. Designed to be oil-resistant and temperature-stable from -22F to 176F (30C to 80C), ContiTech V-Belts are open-flanked, toothed, and shaped for greater traction and torque. High performance construction features include a synthetic fiber fabric cover, a special polyester cord designed to permit tightly controlled shrink, plus a polychloroprene rubber body, integrally molded cogs, and raw edges.

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Polyester fiber tensile members and a ribbed belt design.

from

$20.45

(Pulley Only) Dorman’s Belt Tensioner Pulley is engineered to maintain tension on the serpentine belt for the life of the belt–thereby keeping the alternator charging, the water pump running, and the power steering pump and A/C compressor operating properly. They feature a high-quality double-sealed bearing to resist damage from contaminants. Replacement prevents belt slip and eliminates squeak, squeal or groaning noise associated with a worn belt tensioner pulley.

Product Features:

Steel or plastic construction for long-lasting durability against heat, shock and corrosion
Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
Direct replacement for a proper fit every time
Vehicle try-on testing and rigorous materials testing to ensure high-quality performance

from

$42.33

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

from

$54.99

Rein Automotive OE quality radiator hoses fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for OE hoses and hose assemblies, Rein hoses are identical to the OEM, from the size and shape of their branches to the thermoplastic quick connect fittings.

Product Features:

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$27.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$14.99

Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture

from

$9.57

All APA/URO rubber coolant hoses are pre-shaped and double reinforced for extra strength and durability. Each hose is manufactured from ECD (Electro Chemical Degradation) resistant materials, which prevents electrolysis from breaking down the rubber from the inside out. All APA/URO cooling components are made to meet or exceed OE standards.

Product Features:

All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 125C

from

$24.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$23.49

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$26.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$49.78

Designed to be direct replacements for OE hoses and assemblies, Rein hoses are identical, from the size and shape of their branches to the thermoplastic quick connect fittings when called for by the original manufacturer. Rein hose systems, feature integrated thermoplastic couplings, O-ring seals, and multiple connections that branch out to various engine components. Rein Automotive hoses are designed to fit just like the OE hose. No more cutting hoses to fit or repurposing old “quick connect” fittings.

Product Features:

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$59.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

from

$37.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$74.99

This Litens pulley is manufactured by the original equipment part supplier to Volvo. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). As with the O.E. part, the replace part is made in France using the O.E. specified materials and design and meets all performance and durability requirements. Applications include a wide range of Volvo vehicles. A plastic bolt cap is included with the pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$19.99

Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

from

$24.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$17.49

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$157.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$112.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$31.12

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$45.41

Direct OE replacement for European cars
Integrated thermoplastic couplings and O-ring seals
Designed to go directly from the shelf to the vehicle. No cutting is ever needed
All cooling-water hose inner linings are resistant to electrochemical cracking
high strength and resistance to oil, mud, salt, road debris, and ozone
Resistance to distilled water and water ethylene glycol mixtures
Resistance to air temperatures of up to 135C

from

$97.68

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$116.81

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$159.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavyduty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life.
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$73.59

The Dayco Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

Upgrade your 2003 Volvo S40 with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2003 Volvo S40, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volvo or enhancing its overall performance, Belts and Hoses are key to keeping your S40 functioning at its best. At Advance Auto Parts, we offer a wide selection of 26 Belts and Hoses for the 2003 Volvo S40, designed to meet your needs without breaking the bank. From Belt Tensioner replacements to Heater Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2003 Volvo S40 at great prices. Our Belts and Hoses inventory for this model ranges from just $9.57 to $157.99, with an average price of $52.57. Our 26 Belts and Hoses in stock come from 13 trusted brands, so you’re sure to find the right part for your 2003 Volvo S40 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Volvo S40, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco Driveworks, and more. Dayco Belts and Hoses start at just $14.99 and boast an impressive 5 stars average rating from customers. With 168 customer reviews and counting, our 2003 Volvo S40 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2003 Volvo S40 is always ready to roll. We’re committed to providing you with everything you need to keep your S40 in top shape, all in one place. Start shopping confidently below for your 2003 Volvo S40!

Best-Selling Belt Tensioners for 2003 Volvo S40s

Enhance the driving experience in your Volvo with 4 quality Belt Tensioner components, starting at $57.99.

show more show less

from

$59.99

Endures the toughest conditions while promoting quieter performance and longer life.
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

from

$57.99

This Litens aftermarket part is designed and engineered by one of the world’s largest supplier of Original Equipment (O.E.) tensioners. While the appearance is slightly different from the original equipment part, the Litens part maintains Volvo original form, fit, and function specifications. The Litens design includes a heavy duty polymer pulley for long life and performance. Choosing The Correct Replacement Part: The Litens aftermarket tensioner use a round spring versus a flat spring and is marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

Manufactured by the one on the world’s largest original equipment tensioner suppliers to ensure proper form, fit, and performance.
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
Installation instructions included.
Heavy Duty Steel Pulley with close tolerance ball bearing pocket and Electro-deposited coating for superior corrosion resistance
Professional Mechanics will change this tensioner in approx. 20 minutes.
Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.

from

$116.81

The INA Accessory Belt Tensioner Assembly is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

from

$73.59

OE-Equivalent and a direct fit application
High quality precision spring tension assembly
OE specified bearing and pulley assembly
Durable long life performance

Top Picks for 2003 Volvo S40 Pulleys

Upgrade Volvo S40s with top-quality Pulleys parts, including 4 OEM and aftermarket selections for your 2003 model.

show more show less

from

$74.99

from

$20.45

Steel or plastic construction for long-lasting durability against heat, shock and corrosion
Replacement stops squeak, squeal or groaning noise associated with a worn Belt Tensioner Pulley
Direct replacement for a proper fit every time
Vehicle try-on testing and rigorous materials testing to ensure high-quality performance

Serpentine Idler/Tensioner Pulley: Direct Fit, Polymer, 118 mm Diameter

from

$62.99

Dayco No Slack Idler/Tensioner Pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and therefore longer belt life. Lifetime lubricated ball bearings and double high temperature seals assure peak bearing performance, the most critical element of a pulley’s service life. This specific “grooved”, serpentine belt driven pulley contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant “plastic” pulley.

Product Features:

Lifetime lubricated ball bearings
Double high temperature seals to assure peak bearing performance
Grooved pulley that contains specially formulated glass-filled polymers to insure a high strength, cooler running, wear resistant “plastic” pulley
Meets or exceeds OE quality

from

$42.33

The Dayco Accessory Belt Idler Pulley is a direct fit OEM replacement that contains the same high quality craftsmanship as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application.
Precision bearing
OE High quality pulley assembly
Durable long life performance.

In-Demand Engine Cooling Hoses for 2003 Volvo S40s

Select from 3 premium Engine Cooling Hoses parts for your 2003 Volvo S40, with prices ranging from $39.99 to $157.99.

show more show less

from

$125.99

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$157.99

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$39.99

Reduces installation time.
No cutting, refitting or adjusting the hose.
Prevents leaks and comebacks from reusing old quick connectors and o-rings.
Resistant to heat, salt, road debris, oil and other contaminants.

Most Sold 2003 Volvo S40 Serpentine and V Belts

Explore our best-selling Volvo parts for the 2003 S40 among 6 OEM and aftermarket options starting from $19.99.

show more show less

from

$32.99

The Dayco double sided poly-V belt is designed for multiple accessory drives requiring the transmission of power from both sides of the belt. Manufactured from an extreme temperature EPDM rubber, it features a construction that uses a highly fiber loaded compound on both belt sides to maximize load carrying requirements while minimizing pulley misalignment noise. In addition, the processes utilized in the production of this belt employs advanced manufacturing techniques allowing the overall belt thickness to be minimized, ultimately resulting in a cooler running belt.

Product Features:

Designed to provide longer service life and a reduction in noise
Meets or exceeds SAEJ1459 and SAE J2432 specifications
Engineered to offer long-lasting durability

from

$19.99

The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch

from

$24.99

Designed for the majority of automotive vehicle applications on the road today.
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$51.41

ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:

OE-Equivalent.
Direct fit for easy installation.
Resistant against wear, oil and heat.
Temperature-stable from -22F to 176F (30C to 80C).
Delivers over 98% power efficiency.
High performance construction.
Polychloroprene rubber cover and body.
Polyester fiber tensile members and a ribbed belt design.

from

$51.77

Drive Belt

from

$19.99

Constructed with heat and ozone resistant EPDM rubber
Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
Made with treated polyester cord to reduce belt stretch
Meets OE fit, form, and function

Top-Rated Belts and Hoses Brands For Your 2003 Volvo S40

Shop for the best-rated brands offering Belts and Hoses and other products for your 2003 Volvo S40s. Below you’ll find some of our best rated Belts and Hoses from Dayco and Driveworks, and more. Belts and Hoses from these brands that fit a 2003 S40 start at just $14.99 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2003 Volvo S40 Belts and Hoses

When it comes to maintaining or upgrading your 2003 Volvo S40, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2003 Volvo S40. With over 9 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $51.26. Plus, with over 81 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$73.59

This product is not rated

Dayco, Acc. Belt Tensioner Assy

“”

from
$62.99

This product is not rated

Serpentine Idler/Tensioner Pulley: Direct Fit, Polymer, 118 mm Diameter

“”

from
$125.99

This product is not rated

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.5" Long, 1.19" Diameter

“”

Popular Driveworks 2003 Volvo S40 Belts and Hoses

Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2003 Volvo S40 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2003 S40, Advance Auto Parts carries a full inventory of 1 Driveworks Belts and Hoses. Plus you will be keeping your Volvo in peak condition while saving money because prices on these Driveworks Belts and Hoses range up to $19.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.

from
$19.99

(3)

Double Sided Poly Rib Belt Serpentine Belt; 72.44 Long, 6 Rib Count

“Perfect fit. High quality, brushed ribbed doubled sided belt, better than OEM”

FAQs for 2003 Volvo S40 Belts and Hoses

Which Belts and Hoses are best-sellers for 2003 Volvo S40s?

Out of 26 Belts and Hoses that fit 2003 Volvo S40s, the following parts are the top sellers:

Double Sided Poly Rib Belt Serpentine Belt; 72.44 Long, 6 Rib Count (20060082) – $19.99
1/2" x 12′ Engine Oil Cooler Hose (19230057) – $48.49
Metal Line Kit for Engine Oil Coolers (19230068) – $87.99

What’s the price range for 2003 Volvo S40 Belts and Hoses?

Belts and Hose prices for the 2003 Volvo S40 start at $9.57 and go up to $157.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2003 Volvo S40?

The average price for Belts and Hoses for the 2003 Volvo S40 is $52.57. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Volvo S40 model years?

Yes, we currently carry Belts and Hoses for 11 model years of Volvo S40s between 2000 and 2011. Belts and Hoses are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2002.

What are the cheapest Belts and Hoses for my 2003 Volvo S40?

The cheapest 2003 Volvo S40 Belts and Hoses we carry in stock are:

APA/URO Heater Hose (10767282) – $9.57
APA/URO Heater Hose (10812840) – $14.36
Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (19590336) – $14.99
Double Sided Poly Rib Belt Serpentine Belt; 72.44 Long, 6 Rib Count (20060082) – $19.99
Serpentine Belt: 72.4" Long, 6 Rib Count (50164477) – $19.99

What are the top-rated Belts and Hoses that fit the 2003 Volvo S40?

Out of 168 reviews by customers, our 2003 Volvo S40 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2003 Volvo S40 and their top-rated products:

Radiator Hoses
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49
Belt Tensioners
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49
Serpentine and V Belts
- Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (5198399) – $23.49

What types of Belts and Hoses do you sell for my 2003 Volvo S40?

As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2003 Volvo S40:

Can I get help with 2003 Volvo S40 Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volvo Belts and Hoses and more.

What is your return policy for Volvo S40 Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Volvo S40 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2003 Volvo S40 Belts and Hoses

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

APA/URO Parts – Oil Cooler Hose (Part No.A6200426877APA)

Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100028019MBL)

ContiTech – Drive V-Belt (Part No.W1000331653CON)

Dorman – Idler Pulley (Part No.G6011833490DOR)

Dayco – Dayco, Acc. Belt Tension Pulley, Idler (Part No.G60111221076DAY)

Rein – Radiator Hose (Part No.CHR0355R)

Rein – Radiator Hose (Part No.CHR0386R)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87698)

APA/URO – APA/URO Heater Hose (Part No.R3030141168APA)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 18 Inch Length (Part No.80402)

Rein – Radiator Hose (Part No.CHR0350R)

Rein – Molded Radiator Hose (Part No.G2000227012RIN)

Rein – Radiator Hose (Part No.CHR0124R)

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 19.03 mm Smooth (Part No.89147)

Litens – Idler Pulley: Direct Fit, Thermoplastic, 124mm Diameter (Part No.900536A)

Carquest Standard – Serpentine Belt: 72.4" Long, 6 Rib Count (Part No.724KK6)

Dayco – Poly Rib Belt Serpentine Belt; 35.04 Long, 5 Rib Count (Part No.5050350)

Dayco – Poly Rib Belt Serpentine Belt; 39 Long, 5 Rib Count (Part No.5050390)

Gates – Premium Modular Coolant Hose (Part No.22816)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24.5" Long, 1.25" Diameter (Part No.E72706)

Rein – Rein Radiator Hose (Part No.G2000228257RIN)

Rein – Rein Radiator Hose (Part No.G2000228254RIN)

INA – INA Accessory Belt Tensioner Assembly (Part No.G6001277842INA)

INA – INA Accessory Belt Tensioner Assembly (Part No.G6001326161INA)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89649)

Dayco – Dayco, Acc. Belt Tensioner Assy (Part No.G6001326161DAY)

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89361)

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.999053A)

INA – INA Accessory Belt Tensioner Assembly (Part No.G6001326161INA)

Dayco – Dayco, Acc. Belt Tensioner Assy (Part No.G6001326161DAY)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 19 Inch Length (Part No.87698)

APA/URO – APA/URO Heater Hose (Part No.R3030141170APA)

APA/URO – APA/URO Heater Hose (Part No.R3030141168APA)

Litens – Idler Pulley: Direct Fit, Thermoplastic, 124mm Diameter (Part No.900536A)

Dorman – Idler Pulley (Part No.G6011833490DOR)

Dayco – Serpentine Idler/Tensioner Pulley: Direct Fit, Polymer, 118 mm Diameter (Part No.89599)

Dayco – Dayco, Acc. Belt Tension Pulley, Idler (Part No.G60111221076DAY)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.5" Long, 1.19" Diameter (Part No.C72521)

Gates – Premium Modular Coolant Hose (Part No.22816)

Rein – Radiator Hose (Part No.CHR0356R)

Dayco – Double Sided Poly Rib Belt Serpentine Belt; 72.44 Long, 6 Rib Count (Part No.6060724)

Driveworks – Double Sided Poly Rib Belt Serpentine Belt; 72.44 Long, 6 Rib Count (Part No.724KK6)

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 70mm Dia., 24.5mm Width, Smooth (Part No.89133)

ContiTech – Multi Rib (Serpentine) Belt (Part No.W1000146983CON)

Bando – Drive Belt (Part No.W10001529884BAN)

Carquest Standard – Serpentine Belt: 72.4" Long, 6 Rib Count (Part No.724KK6)