2003 Volkswagen Beetle Wheels and Tires
More 2003 Volkswagen Beetle Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2003 Volkswagen Beetle, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2003 Volkswagen Beetle Wheels and Tires
Driveworks – Wheel Hub (Part No.930-800)
from
$46.49
DRIVEWORKS Wheel Hubs are designed to support the vehicle’s weight and reduce resistance so that your wheels maintain contact with the road under any condition. These wheel hubs are set to the appropriate tolerances to ensure smooth rotation, maximum longevity, and wear resistance. Easy installation, comfortable handling and quiet performance are just a few of the benefits you will find with the installation of DRIVEWORKS Wheel Hubs.
Product Features:
See More
Product Features:
- Constructed from quality materials for extended durability
- Precision-matched components deliver smooth and quiet operation
- Manufactured to strict engineering quality standards
- Brand may vary by location
Dorman – Wheel Lug Nut Cover: Push Type, 21 mm Depth, Plastic, Black, 1 Pack (Part No.611-644.1)
from
$1.49
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Dorman – Wheel Lug Nut Cover: Push Type, 21 mm Depth, Plastic, Black (Sold by each) (Part No.611-644)
from
$2.79
This wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance. Made of quality materials for durability, this cover has been dimensionally validated for specific applications.
Product Features:
See More
Product Features:
- Correct fit – this wheel fastener cover is designed to precisely fit the factory wheel hardware while providing a clean, finished appearance
- Quality materials – manufactured for durability and a quality finish
- Simple installation – no special tools required
- Quality tested – this part has undergone dimensional testing to ensure a quality fit
Meyle – Wheel Bearing Dust C (Part No.K7005384018MEY)
from
$6.06
The Meyle Wheel Bearing Dust Cap is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
MOOG Hub Assemblies – Hub and Bearing Assembly (Part No.513253)
from
$221.99
Backed by superior materials and rigorous testing, MOOG hub assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- EXTENDED SERVICE LIFE — Application-specific advanced raceway design reduces stress, rotation and heat on components
- KEEPS WATER AND DIRT OUT — Quad lip seal design inhibits damage by keeping moisture and other contaminants out
- EASY TO INSTALL — Engineered and designed for fast, hassle-free installation
- CORROSION PROTECTION — Coated wheel studs resist corrosion and rust for easier removal and proper torqueing
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- DAMAGE RESISTANCE — Abrasion-resistant ABS cord resists damage, contamination and vibration that may lead to premature wear
Meyle – Wheel Bearing Kit (Part No.K8020690954MEY)
from
$63.63
The Meyle wheel bearing kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Wheel bearing kits include the required components for complete bearing replacement
- Premium modified bearing steel
- Specific roller and raceway profiles
Driveworks – Taper Bearing Cup (Part No.S-LM-300811)
from
$5.79
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)
from
$525.99
Product Features:
See More
- Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – MX-Sensor 1-Sensor (Rubber) (Part No.1-SENSOR)
from
$41.99
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- 100% ID clone-able with no relearn required
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Replacement Sensor 433MHz; flexible valve 0 to 36 degrees;3 yr warranty (Part No.RDE099V21)
from
$63.99
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- OE Equivalent Direct-Fit TPMS Sensor 315MHz with Metal valve (clamp-in)
- Equivalent in function, fit and quality to the OE sensor.
- No programming required. Quick installation with only a relearn process needed.
- Just install sensor and relearn the vehicle.
- Have WAL technology for locating tire positon.
- Flexible valve angle 0 to 36 degrees.
- For specific models from Audi, Volkswagen
Dorman – Wheel Bearing Retaining Ring (Part No.933-801)
from
$11.79
This wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications, and is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this wheel bearing retaining ring is designed to match the fit and function of the original ring on specified applications
- Restores functionality – this retaining ring is made to fit and fully restore part functionality after the original ring fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (Part No.610-318)
from
$3.49
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Rein – Wheel Bolt (Part No.HWB0011)
from
$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.
Product Features:
See More
Product Features:
- Wheel bolt is produced by an OE manufacturer
- Packaged in convenient quantities.
- Direct replacement for correct fitments
- Manufactured to strict engineering standards/specifications in materials and tolerances
Febi – Lug Bolt (Part No.O802018707FEB)
from
$4.69
Lug Bolt
Autel – Box of 4 Metal Press-in Valve Stems for 1-Sensor (Part No.MXSENSORMVK)
from
$11.49
Kit includes four interchangeable metal valve stems. The patented press release valve design allows interchangeable rubber and metal valves to be easily replaced in the same sensor head by hand, with no valve fitting tool required. Simply click in and press out. Installing TPMS sensors has never been so easy.
Product Features:
See More
Product Features:
- Four Metal Valve Stems
- Press-in interchangeable metal valve stem
- Designed with industry leading corrosion protection technology, Autel metal valves are built to match or exceed OE tire valves.
- Press release valve design allows easy installation without a tool for sensor head fitting
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Adjustable Angle 1-Sensor Rubber (Part No.300020)
from
$41.99
The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Maximum Signal Strength, Battery Reliability.
- 15 Degrees of Valve Stem Flexibility Fits a Wider Variety of Vehicles
- Combined Frequency – 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99 Percent of OE Sensors
- Meets SAE Standards J1205 and J1206
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
National – Bearings (Part No.LM300849)
from
$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.510003)
from
$71.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST- Advanced heat treatment process for strength, and a stainless steel flinger protects the seal and helps extend the bearing life.
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE — Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Wheel Bearing: Direct Fit, 1 Piece (Part No.MA-1206-EF)
from
$37.99
Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- STRONG AND DURABLE — Controlled heat treatment process for strength and durability
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for durability and performance
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- Professional technicians know they can depend on National
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M12 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28175)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
MOOG Hub Assemblies – Suspension Knuckle Assembly (Part No.LK007)
from
$399.99
Backed by superior materials and rigorous testing, MOOG complete knuckle assemblies deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION — Pre-assembled for convenience and includes premium parts like a MOOG knuckle, MOOG wheel hub with studs, bearing, axle nut, backing plate and premium ball joint (where applicable) for a complete solution
- EASY TO INSTALL — Innovative bolt-on, pre-assembled solution designed to make troublesome bearing replacement easier and eliminate the need for special tools or a press
- CORROSION PROTECTION — e-Coated backing plate and knuckle provides long-lasting corrosion resistance
- STRONG AND DURABLE — Engineered with high-quality materials to provide long life and dependability
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Popular 2003 Volkswagen Beetle Wheels and Tires Categories
2003 Volkswagen Beetle Wheels and Tires
You count on your 2003 Volkswagen Beetle to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 28 Wheels and Tires ranging in price from $1.49 to $399.99, you’re sure to find everything you need for your 2003 Volkswagen Beetle.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 10 different brands like Schrader, Dorman, and DriveWorks. 2003 Volkswagen Beetle Wheels and Tires start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 190 extensive product reviews on 2003 Volkswagen Beetle Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Wheel Bearing: Direct Fit, 1 Piece with 3.9 stars and Wheel Hub Assembly with 4.0 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2003 Volkswagen Beetle below to get started!
Top-Rated Wheels and Tires Brands For Your 2003 Volkswagen Beetle
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Volkswagen Beetle running right for years to come. In our inventory you’ll find brands like Schrader, Dorman, DriveWorks, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware and Wheel Spacers. All are waiting to get your 2003 Volkswagen Beetle back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(4)
Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Wheels and Tires
If are what you’re looking for, our inventory holds plenty. We stock brand Wheels and Tires for your 2003 Volkswagen Beetle, and some of our most reviewed parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 2003 Volkswagen Beetle Wheels and Tires
What are the most purchased Wheels and Tires for the 2003 Volkswagen Beetle?
Out of 28 Wheels and Tires for the 2003 Volkswagen Beetle, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Tire Pressure Sensors
What are the top-rated 2003 Volkswagen Beetle Wheels and Tires?
Top-rated Wheels and Tires for your 2003 Volkswagen Beetle based on customer reviews/ratings are:
from
$71.99
(13)
Wheel Bearing: Direct Fit, 1 Piece
“These bearings are not the easiest to replace. It is important how the bearing is supported when pressing in the hub and tightening the cv shaft nut t”
