2003 Porsche 911 Engine Parts
More 2003 Porsche 911 Engine Parts Categories
If you’re looking for an original Engine Parts replacement for a 2003 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Engine Parts to meet your needs.
Essential 2003 Porsche 911 Engine Parts
Original Equipment – Oil Line O-Ring (Part No.A6055465645OEA)
from
$2.83
Oil Line O-Ring
National – Shaft Repair Sleeve (Part No.99333)
from
$54.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Aftermarket – Engine Gasket Set (Part No.A8000452459AFT)
from
$751.82
Engine Gasket Set
Elring – Oil Separator Gasket (Part No.B2015282914ELR)
from
$56.72
Oil Separator Gasket
National – Multi Purpose Seal (Part No.716102)
from
$33.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Original Equipment – Connecting Rod Bolt (Part No.A211052058OEA)
from
$17.03
Connecting Rod Bolt
Behr – Behr Oil Cooler (Part No.A6070301424BEH)
from
$243.64
The cooling of high-load motor oils by oil coolers or the guarantee of an almost constant temperature spectrum brings considerable advantages. Oil change intervals are extended and the engine service life is increased. A basic distinction is made between air-cooled and coolant-cooled types. Depending on requirements, this latter type can be installed in the coolant box or engine block or attached externally to the engine, gear, cooling module or oil filter housing. Behr’s latest design is a compact and powerful stack-disc oil cooler. Since it manages without coolant housing and is made completely of aluminum, its outstanding features are its low weight and design space requirements.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
- Manufactured using advanced materials
- Low weight and design space requirements
- OE Style connections and mounting hardware
Rein – Engine Mount (Part No.AVE0382P)
from
$204.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts
Product Features:
See More
Product Features:
- All Rein Automotive Engine and Transmission mounts are hydraulic or rubber-to-metal based on the original equipment mount design, ensuring the parts performs like original.
- Produced by an Original Equipment supplier
- Matches Original Equipment design specifications
- Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
- High corrosion resistance
Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA3296)
from
$68.99
A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.
Product Features:
See More
Product Features:
- Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
- Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
- Manufactured in an anti-static environment to ensure reliability and stability.
- Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
- Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.
Elring – Timing Cover Gasket (Part No.A8050547190ELR)
from
$48.20
Timing Cover Gasket
Aftermarket – Air Intake Hose Clam (Part No.B2008939817AFT)
from
$5.55
Air Intake Hose Clam
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Elring – Oil Pan Gasket (Part No.A6130495655ELR)
from
$86.43
Oil Pan Gasket
Elring – Oil Pump Gasket (Part No.A6230263785ELR)
from
$7.72
Oil Pump Gasket
Original Equipment – Cam Tensioner Gasket (Part No.A5071449576OEA)
from
$1.47
Cam Tensioner Gasket
INA – Camshaft Follower (Part No.A4010131853INA)
from
$37.87
Camshaft Follower
Nissens – Charge Air Cooler (Part No.B4040130672NSS)
from
$324.25
Designed, manufactured and thoroughly tested according to OE requirements. Nissens’ intercoolers are submitted to corrosion, vibration, pressure impulse, thermal expansion and thermal performance tests. Supreme thermal performance and extended lifespan thanks to a number of special features applied for Nissens’ intercoolers. Perfect finish and product fit, enabling a quick and smooth product installation.
Product Features:
See More
Product Features:
- Tubes equipped with turbulators, ensuring better air flow and larger surface to exchange the heat.
- Compact fin construction with louvres increasing the heat exchange.
- Specially designed core end plates to minimize influence of the mechanical stress thus break-down.
- Plastic tanks designed with special reinforcing inner cross-bars and specially strengthened inlets and outlets.
- Specially designed side panels with cuts to lower the influence of thermal expansion on the core construction.
- Reinforced plastic tanks, enriched with at least 30-35% fibreglass.
- No recycled plastics are used.
Rein – Rein Engine Mount (Part No.A7000433327RIN)
from
$240.09
The REIN Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce engine vibration and noise.
Original Equipment – Freeze Plug (Part No.A1030494258OEA)
from
$13.09
Freeze Plug
TKU – TKU Cam Plug (Part No.A8031274600TKU)
from
$6.82
The TKU Cam Plug is manufactured using the highest quality materials and is designed to withstand high temperatures.
Product Features:
See More
Product Features:
- Stays cool at high temperatures
- Designed to seal minor surface irregularities
- No re-torque required
Original Equipment – Cylinder Head Bolt (Part No.A30301331251OEA)
from
$14.82
Cylinder Head Bolt
Elring – Elring Crankshaft Seal (Part No.A806067502ELR)
from
$29.79
All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.
Product Features:
See More
Product Features:
- Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
- Various designs specifically adapted to the area of application ensure excellent functionality and performance
- High-performance FPM guarantees optimum leak tightness
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1569)
from
$927.99
Engine Variable Valve Timing (VVT) Solenoid
Carquest Premium – Engine Variable Valve Timing (VVT) Solenoid (Part No.VVA1566)
from
$925.99
Engine Variable Valve Timing (VVT) Solenoid
National – Shaft Repair Sleeve (Part No.99177)
from
$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.710196)
from
$33.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Iwis – Timing Chain (Part No.A5100935639IWI)
from
$113.31
Timing Chain
Iwis – Timing Chain (Part No.A51001317489IWI)
from
$37.95
Timing Chain
Popular 2003 Porsche 911 Engine Parts Categories
2003 Porsche 911 Engine Parts
You count on your 2003 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Engine Parts. With 66 Engine Parts ranging in price from $1.47 to $927.99, you’re sure to find everything you need for your 2003 Porsche 911.
Brands matter. If you want to shop a specific Engine Parts brand, we stock 23 different brands like National, Bosch, and Behr. 2003 Porsche 911 Engine Parts start as low as $1.47!
One of the best ways to find top quality OEM or aftermarket Engine Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 12 extensive product reviews on 2003 Porsche 911 Engine Parts.
Did we mention you can order your Engine Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Engine Parts inventory for your 2003 Porsche 911 below to get started!
Top-Rated Engine Parts Brands For Your 2003 Porsche 911
Trusted Engine Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Porsche 911 running right for years to come. In our inventory you’ll find brands like National, Bosch, Behr, and even more.
Popular National Engine Parts
You’ll find popular National brand products across Engine Gaskets and Seals and Engine Timing Parts. All are waiting to get your 2003 Porsche 911 back on the road. Some of the top-rated National products in these categories are:
Top-Rated Engine Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Engine Parts for your 2003 Porsche 911, and some of our most reviewed parts include:
FAQs for 2003 Porsche 911 Engine Parts
What are the most purchased Engine Parts for the 2003 Porsche 911?
Out of 66 Engine Parts for the 2003 Porsche 911, the most popular in our inventory are:
