2003 Pontiac Aztek Suspension Parts
More 2003 Pontiac Aztek Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2003 Pontiac Aztek, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2003 Pontiac Aztek Suspension Parts
MOOG – Suspension Control Arm (Part No.RK80353)
from
$121.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
MOOG – Coil Spring Set (Part No.81040)
from
$159.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
MOOG – Strut Bellows (Part No.K90463)
from
$16.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
KYB – STRUT MOUNTING KIT (Part No.L3033407140KYB)
from
$55.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Monroe – Strut-Mate Strut Boot Kit (Part No.63622)
from
$27.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
MOOG – Strut Mount (Part No.K6521)
from
$116.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
Monroe – Strut-Mate Strut Mount Bearing (Part No.903973)
from
$21.99
Monroe Strut-Mate mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle’s safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate mounting kits can include*: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat. (*as applicable by OE design)
Product Features:
See More
Product Features:
- Replacing all your warn strut components ensures a complete repair
- High-Quality premium strut components
- Engineered for superior fit and performance
- Monroe Strut-Mate mounting kits* include: Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
MOOG – Coil Spring Set (Part No.81039)
from
$107.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
ACDelco – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT146)
from
$26.49
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Dorman – Suspension Knuckle Bushing (Part No.905-505)
from
$64.99
This suspension knuckle bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm Bushing (Part No.K200918)
from
$17.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS — Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN — Engineered to match or exceed OE requirements
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Bushings manufactured from high quality elastomer compounds for durability and ride performance
- Assembled with proper precompression for ultimate in performance and feel
Monroe – OESpectrum Strut (Part No.72113)
from
$112.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
Royal Purple – Max Performance Synthetic Power Steering Fluid (Part No.01326)
from
$6.29
Max Performance Synthetic Power Steering Fluid
Monroe – OESpectrum Monotube Shock Absorber (Part No.39052)
from
$114.99
Providing an exceptional level of handling precision and control, Monroe® OESpectrum® Monotube shocks are designed for vehicles originally equipped with monotube shock absorbers. OESpectrum Monotube shocks filter out noise, vibration and harshness.
Product Features:
See More
Product Features:
- EXCEPTIONAL HANDLING — Full displaced valving, tuned to each vehicle, adjusts to road extremes to provide a smooth ride while free floating dividing piston separates fluid from high-pressure gas charging for reduced shock fade and aeration
- IMPROVES PERFORMANCE — High pressure nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration and tight damping response provides vehicle control
- CONSISTENT RIDE — High-temperature OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- MAINTAINS STABILITY — Monotube technology maintains vehicle control over bumps, dips and potholes for vehicles originally equipped with monotube shocks and struts
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and high-strength pressure tube for better control, increased durability and longer service life
- Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
- 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
- Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
Monroe – Max-Air Air Shock Absorber (Part No.MA826)
from
$234.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Max-Air Air Shock Absorber (Part No.MA824)
from
$101.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)
Product Features:
See More
Product Features:
- MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
- EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
- EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
- BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
- CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
- Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
- Special Air Fitting: Resists air leakage.
Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK29)
from
$33.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More
Suncore – Shock Kit (Part No.2-12S251130-001)
from
$34.99
Shock Kit
Suncore – Shock Kit (Part No.2-12S251600-001)
from
$39.99
Shock Kit
Dorman – Suspension Lateral Arm (Part No.528-235)
from
$60.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Coil Spring Seat (Part No.K80923)
from
$13.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Protects spring and spring seat from damage
- Replacement helps to reduce noise
- Includes insulator and bearing
Rare Parts – Spring Seat (Part No.RP53176)
from
$73.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Reduces road noise
- Reduces vibration
- UV resistant
Monroe – Complete Strut Assembly: Includes Strut, Coil Spring, and Mount (Part No.172113)
from
$244.99
Featuring a vehicle-specific design, Monroe Quick-Strut strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.
Product Features:
See More
Product Features:
- QUICKER, SAFER, EASIER AND COMPLETE REPAIR – Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
- RESTORES RIDE HEIGHT – Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
- VEHICLE-SPECIFIC DESIGN – Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
- OE QUALITY – Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
- MADE TO LAST – Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
- MAINTAINS VEHICLE CONTROL – Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
- IMPROVES STEERING – Premium upper strut mount helps ensure smooth, like-new steering precision and prevents noise, vibration, harshness and memory steer
- RUST RESISTANCE – Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
- ASSEMBLED IN THE USA This Quick-Strut assembly is assembled with pride in Paragould, Arkansas from domestic and imported components
Dorman – Suspension Control Arm (Part No.521-011)
from
$281.99
This lateral arm and ball joint assembly is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Popular 2003 Pontiac Aztek Suspension Parts Categories
2003 Pontiac Aztek Suspension Parts
You count on your 2003 Pontiac Aztek to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 56 Suspension Parts ranging in price from $6.29 to $281.99, you’re sure to find everything you need for your 2003 Pontiac Aztek.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 11 different brands like Valvoline, Monroe, and Moog. 2003 Pontiac Aztek Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 230 extensive product reviews on 2003 Pontiac Aztek Suspension Parts. Some of the top-rated Suspension Parts products we carry are Strut-Mate Strut Mounting Kit with 3.8 stars and Strut Bellows with 3.8 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2003 Pontiac Aztek below to get started!
Top-Rated Suspension Parts Brands For Your 2003 Pontiac Aztek
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Pontiac Aztek running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.
Popular Valvoline Suspension Parts
You’ll find popular Valvoline brand products across Air Suspension and Kits. All are waiting to get your 2003 Pontiac Aztek back on the road. Some of the top-rated Valvoline products in these categories are:
from
$14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Top-Rated Monroe Suspension Parts
If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 2003 Pontiac Aztek, and some of our most reviewed Monroe parts include:
FAQs for 2003 Pontiac Aztek Suspension Parts
What are the most purchased Suspension Parts for the 2003 Pontiac Aztek?
Out of 56 Suspension Parts for the 2003 Pontiac Aztek, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 2003 Pontiac Aztek Suspension Parts?
Top-rated Suspension Parts for your 2003 Pontiac Aztek based on customer reviews/ratings are:
from
$54.99
(11)
Strut-Mate Strut Mounting Kit
“Makes strut install a snap. So easy to install a fifth grader could do it. Included all the little hardware for a perfect install. I don’t see how any”
