2003 Nissan Sentra Clutch Systems
Find Your Specific 2003 Nissan Sentra Clutch Systems
Below you will find various in-demand Nissan Clutch Systems, components and accessories for your 2003 Sentra. Advance Auto Parts has popular Sentra parts like Clutch Slave Cylinders, Clutch Kits, Clutch Master Cylinders and more. You’ll also find aftermarket and OEM Clutch Systems for other Sentra model years including
2011,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2003 Nissan Sentra Clutch Systems below and start saving instantly.
Popular 2003 Nissan Sentra Clutch Systems Categories
Essential Clutch Systems for 2003 Nissan Sentras
LuK – OE Quality Flywheel (Part No.LFW172)
from
$62.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LuK – OE Quality Dual Mass Flywheel (Part No.DMF040)
from
$385.99
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
LUK – Dual Mass Flywheel (DMF) (Part No.I1000835705LUK)
from
$559.98
LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.
Product Features:
See More
Product Features:
- Top driving comfort
- Absorbs vibrations
- Prevents noise
- Enables comfortable, low-revs driving
- Saves fuel
- Relieves crankshaft and gearbox
Sachs – Clutch Disc (Part No.I2010240106SAC)
from
$113.79
The Sachs Clutch Disc is manufactured in accordance to strict OEM specifications for performance and durability. Sachs manufactures clutches for many leading European automakers and guarantees the same high quality in its aftermarket clutch kits.
Product Features:
See More
Product Features:
- OE Quality and direct fit application.
- Original Equipment Supplier
Valeo – OE Replacement Clutch Kit (Part No.I2030966777VAL)
from
$287.70
No other clutch kit supplier can offer components that exceed the OE quality that Valeo offers. Many program repackagers do not offer high percentages of OE specified clutch covers and discs. You can expect long life and smooth engagement from Valeo’s clutches because of our focus on quality. Valeo’s kits contain every component that a technician needs to change out a clutch. Each kit contains a clutch disc assembly, pressure plate cover assembly, release bearing, grease pack, and installation guide. Also included when necessary are a pilot bearing, and technical service bulletin. Valeo’s kits use packaging that is state of the art to ensure that the product arrives and remains free of damage right up to the time it is installed in a vehicle. The extra durable locking tabs ensure product security within its packaging until it is removed for final installation.
Product Features:
See More
Product Features:
- OE Quality and direct fit application.
- Long life and smooth engagement.
- Clutch supplier worldwide to the Original Equipment Manufacturers.
- Valeo’s kits contain every component that a technician needs to change out a clutch.
LuK – Clutch Master Cylinder (Part No.LMC435)
from
$65.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – Clutch Master Cylinder (Part No.LMC442)
from
$159.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LUK – Clutch Master Cylinder (Part No.I3000836125LUK)
from
$218.24
The LuK Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Sachs – Pressure Plate (Part No.I2000151509SAC)
from
$148.03
The Sachs Pressure Plate is manufactured in accordance to strict OEM specifications for performance and durability. Sachs manufactures clutches for many leading European automakers and guarantees the same high quality in its aftermarket clutch kits.
Product Features:
See More
Product Features:
- OE Quality and direct fit application.
- Original Equipment Supplier
Dorman – Clutch Pilot Bushing (Part No.690-004.1)
from
$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Clutch Pilot Bushing (Part No.14658)
from
$7.49
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearings (Part No.PB-22)
from
$3.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Clutch Pilot Bushing .629 In. x .816 In. Type A, Length .689 In. (Sold by each) (Part No.690-004)
from
$2.99
This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Nabtesco – Clutch Slave Cylinder (Part No.I3010303588NAB)
from
$69.20
The Nabtesco Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC407)
from
$23.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Beck/Arnley – Clutch Slave Cylinder (Part No.072-9406)
from
$61.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium seals and materials
- Quality construction for durability
- Designed for undercar conditions
- Application specific for this vehicle
Nabtesco – Clutch Slave Cylinder (Part No.I3010567488NAB)
from
$60.96
The Nabtesco Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC370)
from
$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ATP – FLYWHEEL SHIM (Part No.NS-2)
from
$18.99
FLYWHEEL SHIM
LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.06-040)
from
$105.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 7 1/16" Disc Diameter, 13/16" Input Shaft Diameter, 18 Tooth Spline (Part No.06-021)
from
$108.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 8 7/8" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline (Part No.06-086)
from
$285.99
Voted #1 recommended Clutch products by installers since 2015. Luk, a Schaeffler brand pioneered the way from the conventional and self-adjusting clutch to the innovative double clutch. We carry a comprehensive product portfolio of complete clutch sets, pressure plates, discs, flywheels, slave and master cylinders and release bearings, The Luk product range also includes a large number of available single components, dampers and absorbers and hydraulic clutch lines.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 9 7/16" Disc Diameter, 15/16" Input Shaft Diameter, 21 Tooth Spline (Part No.06-084)
from
$602.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.06-057)
from
$239.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-071)
from
$233.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Upgrade your 2003 Nissan Sentra with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 2003 Nissan Sentra, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Nissan or enhancing its overall performance, Clutch Systems are key to keeping your Sentra functioning at its best. At Advance Auto Parts, we offer a wide selection of 20 Clutch Systems for the 2003 Nissan Sentra, designed to meet your needs without breaking the bank.
From
Clutch Slave Cylinder
replacements to
Clutch Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2003 Nissan Sentra at great prices.
Our Clutch Systems inventory for this model
ranges from just $3.29 to $451.50, with
an average price of $137.27.
Our 20 Clutch Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 2003 Nissan Sentra without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Nissan Sentra, we stock popular OEM and aftermarket Clutch Systems from top names
like Sachs, and more.
Sachs Clutch Systems
start at just $113.79 and boast an impressive 4 stars average rating from customers.
With 3 customer reviews and counting, our 2003 Nissan Sentra Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2003 Nissan Sentra is always ready to roll. We’re committed to providing you with everything you need to keep your Sentra in top shape, all in one place.
Start shopping confidently below for your 2003 Nissan Sentra!
Best-Selling Clutch Slave Cylinders for 2003 Nissan Sentras
Enhance the driving experience in your Nissan with 6 quality Clutch Slave Cylinder components, starting at $23.99.
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC407)
from
$23.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC370)
from
$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Nabtesco – Clutch Slave Cylinder (Part No.I3010303588NAB)
from
$69.20
The Nabtesco Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Clutch Slave Cylinder (Part No.072-9406)
from
$61.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium seals and materials
- Quality construction for durability
- Designed for undercar conditions
- Application specific for this vehicle
Nabtesco – Clutch Slave Cylinder (Part No.I3010567488NAB)
from
$60.96
The Nabtesco Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Beck/Arnley – Clutch Slave Cylinder (Part No.072-9542)
from
$41.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made with premium seals and materials
- Quality construction for durability
- Designed for undercar conditions
- Application specific for this vehicle
Most Popular 2003 Nissan Sentra Clutch Kits
Customize your Nissan with 2 Clutch Kits products
like Clutch Sets, all
priced under $239.99.
LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.06-057)
from
$239.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Clutch Kit: 9 7/16" Disc Diameter, 1" Input Shaft Diameter, 24 Tooth Spline (Part No.06-071)
from
$233.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Top Picks for 2003 Nissan Sentra Clutch Master Cylinders
Upgrade Nissan Sentras with top-quality Clutch Master Cylinders parts, including 2 OEM and aftermarket selections for your 2003 model.
LuK – Clutch Master Cylinder (Part No.LMC435)
from
$65.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Nabtesco – Clutch Master Cylinder (Part No.I3000282642NAB)
from
$129.55
The Nabtesco Clutch Master Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium Original Equipment replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
In-Demand Flywheels for 2003 Nissan Sentras
Select from 5 premium Flywheels parts for your 2003 Nissan Sentra, with prices ranging from $18.99 to $451.50.
LuK – OE Quality Flywheel (Part No.LFW403)
from
$89.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
LUK – Dual Mass Flywheel (DMF) (Part No.I1000835630LUK)
from
$451.50
LuK dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. These units feature a built-in damper designed to isolate engine torque spikes and prevent transmission damage. By design, dual-mass flywheels cannot be resurfaced. This all makes the LuK dual mass flywheel the ideal solution. With one drawback: the higher the mass reactance of the vibrating masses, the more excessive the resonance increase and associated torque peaks. With the dual mass flywheel, this would be easily perceived when starting and stopping the engine; much more easily than with a conventional clutch system. Additionally: the smaller flymass of the engine has less of a stabilizing effect on the speed fluctuation of the engine. Thanks to decades of experience in clutch building, the LuK specialists were able to find an excellent solution to this problem. An additional damping device effectively prevents resonance overload. In normal operation, however, this additional damping device has no function and the torsional vibrations of the engine are filtered out by spring dampers. Friction and spring rate – the correct ratio is important. For optimal vibration isolation and soft resonance passage when starting and stopping the engine, the ratio between friction and spring rate must be optimal. The length of the springs is a key factor: The softer a spring, the more efficiently vibrations are isolated. The extra-long springs of the latest generation of dual mass flywheels significantly reduce the spring rate compared to a first generation dual mass flywheel. In routine driving operations, excessive resonance increases are kept almost completely away from the gearbox.
Product Features:
See More
Product Features:
- Top driving comfort
- Absorbs vibrations
- Prevents noise
- Enables comfortable, low-revs driving
- Saves fuel
- Relieves crankshaft and gearbox
LuK – OE Quality Dual Mass Flywheel (Part No.DMF040)
from
$385.99
LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
See More
LUK – Flywheel (Part No.I1000835839LUK)
from
$129.09
LuK conventional flywheels are dynamically balanced to reduce vibration and improve clutch performance. All new – never remanufactured – every flywheel component is engineered and built to original-equipment specifications, including the ring gear and dowel pins.
Product Features:
See More
Product Features:
- OE quality and direct fit application
- Made from high quality steel
- Designed to reduce clutch chatter and vibration
- Dynamically balanced
ATP – FLYWHEEL SHIM (Part No.NS-2)
from
$18.99
FLYWHEEL SHIM
Most Sold 2003 Nissan Sentra Clutch Pilot Bushings
Explore our best-selling Nissan parts for the 2003 Sentra among 1 OEM and aftermarket options starting from $3.29.
National – Bearings (Part No.PB-22)
from
$3.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel and bronze for outstanding durability and performance
- Oil impregnated for extended life
- Industry leading coverage
- Professional technicians know they can depend on National
Top-Rated Clutch Systems Brands For Your 2003 Nissan Sentra
Shop for the best-rated brands offering Clutch Systems and other products for your 2003 Nissan Sentras. Below you’ll find some of our best rated Clutch Systems from Sachs, and more. Clutch Systems from these brands that fit a 2003 Sentra start at just $113.79 and are rated as high as 4 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.
Popular Sachs 2003 Nissan Sentra Clutch Systems
When it comes to maintaining or upgrading your 2003 Nissan Sentra, using quality Clutch Systems is essential to ensure durability and a perfect fit. Sachs ticks all of those boxes. We offer a wide selection of Sachs Clutch Systems, specifically designed for the 2003 Nissan Sentra. With over 2 Sachs brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $113.79, with an average price of just $130.91. Plus, with over 1 customer reviews and an average rating of 4 stars, you can trust that our Sachs Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2003 Nissan Sentra Clutch Systems
Which Clutch Systems are best-sellers for 2003 Nissan Sentras?
Out of 20 Clutch Systems that fit 2003 Nissan Sentras, the following parts are the top sellers:
- Bearings (3278034) – $3.29
- Clutch Master Cylinder (10649904) – $65.99
- LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (10651376) – $23.99
What’s the price range for 2003 Nissan Sentra Clutch Systems?
Clutch System prices for the 2003 Nissan Sentra start at $3.29 and go up to $451.50 for the most premium parts.
What’s the average price of a Clutch System for a 2003 Nissan Sentra?
The average price for Clutch Systems for the 2003 Nissan Sentra is $137.27. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other Nissan Sentra model years?
What are the cheapest Clutch Systems for my 2003 Nissan Sentra?
The cheapest 2003 Nissan Sentra Clutch Systems we carry in stock are:
- Bearings (3278034) – $3.29
- FLYWHEEL SHIM (10860875) – $18.99
- LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (10651376) – $23.99
- Clutch Slave Cylinder (25983510) – $41.49
- LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (10651264) – $43.99
What are the top-rated Clutch Systems that fit the 2003 Nissan Sentra?
Out of 3 reviews by customers, our 2003 Nissan Sentra Clutch Systems have an average customer rating of . These are some of the highest-rated Clutch System types for the 2003 Nissan Sentra and their top-rated products:
- Clutch Discs
- Clutch Disc (10788064) – $113.79
What types of Clutch Systems do you sell for my 2003 Nissan Sentra?
As of 2/5/25, these are some of the most in-demand types of Clutch Systems for a 2003 Nissan Sentra:
Can I get help with 2003 Nissan Sentra Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Nissan Clutch Systems and more.
What is your return policy for Nissan Sentra Clutch Systems?
Advance Auto Parts keeps returns simple. For new Nissan Sentra Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
