2003 Mitsubishi Outlander Drivetrains
Find Your Specific 2003 Mitsubishi Outlander Drivetrains
Below you will find various in-demand Mitsubishi Drivetrains, components and accessories for your 2003 Outlander. Advance Auto Parts has popular Outlander parts like Transfer Cases, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other Outlander model years including
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019,
2020 and more. Select a category of 2003 Mitsubishi Outlander Drivetrains below and start saving instantly.
Popular 2003 Mitsubishi Outlander Drivetrains Categories
Essential Drivetrains for 2003 Mitsubishi Outlanders
Beck/Arnley – Cu Boot Kit (Part No.103-2976)
from
$37.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
EMPI – RE CV Joint Boot Kit (Part No.K6010182716EMP)
from
$39.02
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Dorman – Rear Driveshaft Assembly (Part No.986-734)
from
$1188.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Royal Purple – HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart) (Part No.11744)
from
$12.99
Royal Purple HMX SAE 5W-30 High-Mileage Synthetic Motor Oil, 1 quart is specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles. Formulated with robust zinc/phosphorus anti-wear compounds combined with Royal Purple’s proprietary additive technology Synerlec, HMX is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines. In addition, HMX is fortified with stout detergents to remove engine build-up and deposits, maintain cleanliness and promote engine longevity.
Product Features:
See More
Product Features:
- Specifically designed to minimize wear and restore lost performance in engines with more than 75,000 miles
- Formulated with robust zinc/phosphorus anti-wear compounds combined with royal purple’s proprietary additive technology
- Hmx is chemically enhanced to revitalize hardened seals, reducing oil consumption common in high-mileage engines
- Reduces friction and metal-to-metal contact for peak engine performance
- Also provides outstanding oxidation resistance to safely extend oil drain intervals, and an ionic attraction to metal surfaces, providing protection and minimizing wear at start-up
- High-Mileage Formula: Specifically designed for engines with more than 75,000 miles, this full synthetic engine oil helps minimize wear and restore lost performance.
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Neapco – Universal Joint (Part No.1-1557)
National – Bearings (Part No.32006)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-712007)
Driveworks – Oil Seal (Part No.S-224460)
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51547)
from
$86.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Driveworks – Camshaft Seal (Part No.S-99139)
Corteco – Diff. Side Cover Sea (Part No.J7041150348CFW)
from
$9.32
Diff. Side Cover Sea
Whiteline – Differential Mount Rear Bushing (Part No.W92956)
from
$81.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
FAG US – SHAFT SEAL (Part No.SS2475)
from
$11.49
SHAFT SEAL
National – Bearings (Part No.32008)
from
$36.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.30305)
from
$46.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.712007)
from
$11.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
FAG US – SHAFT SEAL (Part No.SS2480)
from
$13.29
SHAFT SEAL
National – Trans Case Seal (Part No.711115)
from
$26.49
Trans Case Seal
Anchor – Center Support Bearing Motor Mount: Rear, 1 Piece (Part No.6137)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MITS 03-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2006
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 8.25 INCH / 210 MM
- REAR NUM 2
Anchor – Center Support Bearing Motor Mount: Front, 1 Piece (Part No.6136)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MITS 03-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2006
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.75 INCH / 19 MM
- MOUNT WIDTH: 7.00 INCH / 178 MM
- FRONT NUM 1
Upgrade your 2003 Mitsubishi Outlander with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 2003 Mitsubishi Outlander, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Mitsubishi or enhancing its overall performance, Drivetrains are key to keeping your Outlander functioning at its best. At Advance Auto Parts, we offer a wide selection of 43 Drivetrains for the 2003 Mitsubishi Outlander, designed to meet your needs without breaking the bank.
From
Transfer Case
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 2003 Mitsubishi Outlander at great prices.
Our Drivetrains inventory for this model
ranges from just $4.49 to $1,188.99, with
an average price of $97.68.
Our 43 Drivetrains in stock come from 17 trusted brands, so you’re sure to find the right part for your 2003 Mitsubishi Outlander without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Mitsubishi Outlander, we stock popular OEM and aftermarket Drivetrains from top names
like National, Moog, Carquest Premium, and more.
National Drivetrains
start at just $11.29 and boast an impressive 4 stars average rating from customers.
Moog and Carquest Premium also bring quality to the table, with Drivetrains available starting at $46.99, and at an average 4 stars rating.
With 12 customer reviews and counting, our 2003 Mitsubishi Outlander Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2003 Mitsubishi Outlander is always ready to roll. We’re committed to providing you with everything you need to keep your Outlander in top shape, all in one place.
Start shopping confidently below for your 2003 Mitsubishi Outlander!
Best-Selling Transfer Cases for 2003 Mitsubishi Outlanders
Enhance the driving experience in your Mitsubishi with 4 quality Transfer Case components, starting at $5.49.
Driveworks – Manual Transmission Input Shaft Seal (Part No.S-712007)
National – Bearings (Part No.32006)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
FAG US – SHAFT SEAL (Part No.SS2480)
from
$13.29
SHAFT SEAL
Corteco – Trans Case Output Sh (Part No.J7121788679CFW)
from
$7.95
Trans Case Output Sh
Most Popular 2003 Mitsubishi Outlander Drive Shafts and Axles
Customize your Mitsubishi with 17 Drive Shafts and Axles products
like Drive Shaft and Axles,
Axle Shaft Seals, and
Center Support Bearings, all
priced under $1,188.99.
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51553)
from
$103.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51546)
from
$97.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51552)
from
$97.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51547)
from
$86.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
National – Multi Purpose Seal (Part No.712007)
from
$11.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Anchor – Center Support Bearing Motor Mount: Rear, 1 Piece (Part No.6137)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MITS 03-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2006
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.50 INCH / 13 MM
- MOUNT WIDTH: 8.25 INCH / 210 MM
- REAR NUM 2
Anchor – Center Support Bearing Motor Mount: Front, 1 Piece (Part No.6136)
from
$83.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to MITS 03-06;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2006
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 0.75 INCH / 19 MM
- MOUNT WIDTH: 7.00 INCH / 178 MM
- FRONT NUM 1
Dorman – Rear Driveshaft Assembly (Part No.986-734)
from
$1188.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-3008)
from
$775.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Autopart International Inc – Axle Assembly (Part No.K40001945917API)
from
$114.94
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40002003814API)
from
$114.39
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40002017834API)
from
$114.39
Axle Assembly
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV51901)
from
$104.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
FEQ – Axle Assembly (100% New) (Part No.K4000273214FEQ)
from
$104.19
The FEQ Axle Assembly is assembled with 100% new components and features neoprene boots, high temp moly-grease and new clips and retainers.
Product Features:
See More
Product Features:
- OE-Equivalent and a Direct fit Replacement
- Utilizes OE style crimp boot clamps
- Provides exceptional reliability
- 100% new OE replacement
- Uses top quality Neoprene boots
Carquest Premium – CV Axle Assembly (Part No.NCV51900)
from
$97.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.
Product Features:
See More
Product Features:
- 100% New Axle
- Quality Engineered for Superior Durability
- Tested for Reliable Performance
- No Core Exchange
DEA – Driveshaft Support (Part No.K1030451327DEA)
from
$78.59
Driveshaft Support
FAG US – SHAFT SEAL (Part No.SS2475)
from
$11.49
SHAFT SEAL
Top Picks for 2003 Mitsubishi Outlander Universal Joints
Upgrade Mitsubishi Outlanders with top-quality Universal Joints parts, including 2 OEM and aftermarket selections for your 2003 model.
MOOG Driveline Products – Non-Greaseable Premium Universal Joint (Part No.398)
from
$46.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates?
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Bearing cups ground and slightly oversized to fit in a used drive shaft
- Cross forging shape and flash provide easier installation and high strength
Spicer – U Joint (Part No.K10102524312SPI)
from
$52.21
U Joint
In-Demand Differentials for 2003 Mitsubishi Outlanders
Select from 10 premium Differentials parts for your 2003 Mitsubishi Outlander, with prices ranging from $4.49 to $94.68.
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Bearings (Part No.30207)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
DEA – Differential Mount (Part No.J7070947522DEA)
from
$94.68
Differential Mount
DEA – Differential Mount (Part No.J7070947524DEA)
from
$94.68
Differential Mount
Whiteline – Differential Mount Rear Bushing (Part No.W92956)
from
$81.99
Whiteline’s differential bushing solutions ensure pinion angles are maintained while delivering an improved gear shift resulting in reduced initial torque loss and greater power transfer to the wheels.
Product Features:
See More
Product Features:
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Driveworks – Camshaft Seal (Part No.S-99139)
Idemitsu – Type HK Automatic Transmission Fluid – 1 qt (Part No.10112-042D)
from
$10.79
Engineered for and meets requirements of Hyundai/Kia/Mitsubishi Automatic Transmission with SP-III specifications.
Product Features:
See More
Product Features:
- Excellent resistance to oxidation and thermal breakdown provides long fluid life and extended protection
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Provides superior cleanliness, keeping the transmission free of sludge and varnish deposits
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
- Advanced anti-wear technology provides maximum protection to gears and bearings
Corteco – Diff. Side Cover Sea (Part No.J7041150348CFW)
from
$9.32
Diff. Side Cover Sea
Driveworks – Oil Seal (Part No.S-224460)
Most Sold 2003 Mitsubishi Outlander CV Axles and Joints
Explore our best-selling Mitsubishi parts for the 2003 Outlander among 10 OEM and aftermarket options starting from $20.99.
Beck/Arnley – Cu Joint Boot Kit (Part No.103-2502)
from
$28.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
EMPI – RE CV Joint Boot Kit (Part No.K6010375479EMP)
from
$43.71
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
EMPI – RE CV Joint Boot Kit (Part No.K6010182710EMP)
from
$36.70
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Beck/Arnley – Cu Boot Kit (Part No.103-2979)
from
$37.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
EMPI – RE CV Joint Boot Kit (Part No.K6010182716EMP)
from
$39.02
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Beck/Arnley – Cu Boot Kit (Part No.103-2967)
from
$31.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Beck/Arnley – Cu Boot Kit (Part No.103-2570)
from
$31.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Beck/Arnley – Cu Boot Kit (Part No.103-2928)
from
$28.49
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
EMPI – RE CV Joint Boot Kit (Part No.K6010181549EMP)
from
$27.39
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Beck/Arnley – Cu Boot Kit (Part No.103-2944)
from
$20.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot
- Kit complete with boot, grease, and hardware for complete installation
- Hardware matches original design requirements
- Application specific for this vehicle
Top-Rated Drivetrains Brands For Your 2003 Mitsubishi Outlander
Shop for the best-rated brands offering Drivetrains and other products for your 2003 Mitsubishi Outlanders. Below you’ll find some of our best rated Drivetrains from National, Moog, and Carquest Premium, and more. Drivetrains from these brands that fit a 2003 Outlander start at just $11.29 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular National 2003 Mitsubishi Outlander Drivetrains
When it comes to maintaining or upgrading your 2003 Mitsubishi Outlander, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 2003 Mitsubishi Outlander. With over 5 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.29, with an average price of just $33.45. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Moog 2003 Mitsubishi Outlander Drivetrains
Moog auto parts is one of the highest quality Drivetrain brands in the market. Any 2003 Mitsubishi Outlander owner should feel confident when installing genuine Moog parts in their vehicle. To ensure the best fit and performance for your 2003 Outlander, Advance Auto Parts carries a full inventory of 1 Moog Drivetrains. Plus you will be keeping your Mitsubishi in peak condition while saving money because prices on these Moog Drivetrains range up to $46.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
FAQs for 2003 Mitsubishi Outlander Drivetrains
Which Drivetrains are best-sellers for 2003 Mitsubishi Outlanders?
Out of 43 Drivetrains that fit 2003 Mitsubishi Outlanders, the following parts are the top sellers:
- Non-Greaseable Premium Universal Joint (10087114) – $46.99
- Shaft Repair Sleeve (18445088) – $39.99
- Shaft Repair Sleeve (18445098) – $37.49
What’s the price range for 2003 Mitsubishi Outlander Drivetrains?
Drivetrain prices for the 2003 Mitsubishi Outlander start at $4.49 and go up to $1,188.99 for the most premium parts.
What’s the average price of a Drivetrain for a 2003 Mitsubishi Outlander?
The average price for Drivetrains for the 2003 Mitsubishi Outlander is $97.68. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Mitsubishi Outlander model years?
What are the cheapest Drivetrains for my 2003 Mitsubishi Outlander?
The cheapest 2003 Mitsubishi Outlander Drivetrains we carry in stock are:
- Oil Seal (11494092) – $4.49
- Manual Transmission Input Shaft Seal (11468543) – $5.49
- Trans Case Output Sh (12615614) – $7.95
- Diff. Side Cover Sea (11868251) – $9.32
- Type HK Automatic Transmission Fluid – 1 qt (11863921) – $10.79
What are the top-rated Drivetrains that fit the 2003 Mitsubishi Outlander?
Out of 12 reviews by customers, our 2003 Mitsubishi Outlander Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 2003 Mitsubishi Outlander and their top-rated products:
- Differentials
- Shaft Repair Sleeve (18445088) – $39.99
- Shaft Repair Sleeve (18445098) – $37.49
- Universal Joints
- Shaft Repair Sleeve (18445088) – $39.99
- Shaft Repair Sleeve (18445098) – $37.49
What types of Drivetrains do you sell for my 2003 Mitsubishi Outlander?
As of 2/5/25, these are some of the most in-demand types of Drivetrains for a 2003 Mitsubishi Outlander:
Can I get help with 2003 Mitsubishi Outlander Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Mitsubishi Drivetrains and more.
What is your return policy for Mitsubishi Outlander Drivetrains?
Advance Auto Parts keeps returns simple. For new Mitsubishi Outlander Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
