2003 Mazda Miata Exhaust Parts
More 2003 Mazda Miata Exhaust Parts Categories
If you’re looking for an original Exhaust Parts replacement for a 2003 Mazda Miata, you can search through our selection below. You’ll also find aftermarket and OEM Exhaust Parts to meet your needs.
Essential 2003 Mazda Miata Exhaust Parts
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51992)
from
$730.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51992. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1999-2000 Mazda Miata and interchanges with OE parts BP4Y-20-500C and BP4Y-20-500B. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23684)
from
$321.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23684. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 1990-1993 Mazda Miata. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.418005)
from
$438.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 418005 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15777)
from
$372.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker® Standard® direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE — Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity warranty. Visit Walkerexhaust.com for details.
Felpro – Exhaust Pipe Flange Gasket (Part No.60866)
from
$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61537)
from
$12.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60831)
from
$10.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60620)
from
$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Borla Performance Exhaust – T-304 Ss, 2" Dia, Single Exhaust With Single Exit, 2.5"Dia X 7.5"L Round (Part No.14411)
from
$796.99
The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.
Product Features:
See More
Product Features:
- Features Patented Straight-Through And Multi-Core Technology To Unleash Hidden Horsepower
- Increases The Overall Sound Level And Performance
- Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
- Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade T-304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
- Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds
MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.16638)
from
$812.99
The MagnaFlow 1999-2005 Mazda Miata Street Series Cat-Back Performance Exhaust System brings out the personality of your 1.8L 1999-2005 Mazda Miata with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.5in. main piping and 1 Straight-Through mufflers ending in a Single Straight Passenger Side Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Mazda Miata exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Mazda Miata’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 16638 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16638 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Dyno-proven performance
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
HJS – Exhaust Hanger (Part No.H8050174953HJS)
from
$10.66
Exhaust Hanger
BRExhaust – Exhaust Hanger (Part No.255-381)
from
$6.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts will help keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- OE-style design for quality fit
- Secure sealing for superior durability
- Manufactured from quality materials to ensure maximum durability
- Reduced vibration
Ishino – Exhaust Manifold Gasket (Part No.A8111161569ISH)
from
$10.75
Exhaust Manifold Gasket
Ishino – Exhaust Manifold Gasket (Part No.A8111176998ISH)
from
$22.07
Exhaust Manifold Gasket
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94532)
from
$25.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Felpro – Exhaust Manifold Gasket Set (Part No.MS 94611)
from
$16.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
AP Exhaust – Exhaust Pipe Gasket (Part No.H40061025538APE)
from
$5.76
Exhaust Pipe Gasket
Popular 2003 Mazda Miata Exhaust Parts Categories
2003 Mazda Miata Exhaust Parts
You count on your 2003 Mazda Miata to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Exhaust Parts. With 13 Exhaust Parts ranging in price from $10.49 to $812.99, you’re sure to find everything you need for your 2003 Mazda Miata.
Brands matter. If you want to shop a specific Exhaust Parts brand, we stock 4 different brands like Felpro, MagnaFlow, and Walker. 2003 Mazda Miata Exhaust Parts start as low as $10.49!
One of the best ways to find top quality OEM or aftermarket Exhaust Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 4 extensive product reviews on 2003 Mazda Miata Exhaust Parts. Some of the top-rated Exhaust Parts products we carry are CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed with 5.0 stars.
Did we mention you can order your Exhaust Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Exhaust Parts inventory for your 2003 Mazda Miata below to get started!
Top-Rated Exhaust Parts Brands For Your 2003 Mazda Miata
Trusted Exhaust Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2003 Mazda Miata running right for years to come. In our inventory you’ll find brands like Felpro, MagnaFlow, Walker, and even more.
Popular MagnaFlow Exhaust Parts
You’ll find popular MagnaFlow brand products across Catalytic Converters. All are waiting to get your 2003 Mazda Miata back on the road. Some of the top-rated MagnaFlow products in these categories are:
from
$519.99
(1)
OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter
Catalytic Converters
FAQs for 2003 Mazda Miata Exhaust Parts
What are the most purchased Exhaust Parts for the 2003 Mazda Miata?
Out of 13 Exhaust Parts for the 2003 Mazda Miata, the most popular in our inventory are:
from
$202.99
This product is not rated
OEM Grade Federal / EPA Compliant Universal Catalytic Converter
Catalytic Converters
What are the top-rated 2003 Mazda Miata Exhaust Parts?
Top-rated Exhaust Parts for your 2003 Mazda Miata based on customer reviews/ratings are:
from
$607.99
(1)
CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed
“VERY GOOD QUALITY AND GOOD PRICE AND FAST SHIPING”
