2003 Freightliner Classic Belts and Hoses

Essential Belts and Hoses for 2003 Freightliner Classics

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9451HD)

FleetRunner« Heavy-Duty V-Belt

from

$32.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9525)

Automotive XL« High Capacity V-Belt

from

$32.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Dayco – Automotive RPF Raw Edge Cogged Belt (Part No.17450)

Automotive RPF Raw Edge Cogged Belt

from

$15.79
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Gates – Molded Coolant Hose (Part No.23014)

Molded Coolant Hose

from

$52.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:
  • Heat and ozone resistant cover.
  • Engineered to resist electrochemical degradation – the leading cause of hose failure.
  • Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
  • Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
  • Temperature Rating: -40° F to 275° F (-40° C to 135° C) in coolant hose applications.
  • Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter (Part No.E70922)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 2.50" Diameter

from

$26.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter (Part No.C71813)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 10" Long, 2.50" Diameter

from

$22.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Litens – Idler Pulley: Direct Fit, Steel, 75mm Diameter (Part No.900274A)

Idler Pulley: Direct Fit, Steel, 75mm Diameter

from

$92.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Kenworth, Freightliner, International, Peterbilt, and Sterling. Comes complete with new bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Litens – Idler Pulley: Direct Fit, Steel, 74mm Diameter, w/ Hardware (Part No.900454A)

Idler Pulley: Direct Fit, Steel, 74mm Diameter, w/ Hardware

from

$109.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Freightliner Columbia. Comes complete with new bolt, washer/dust cover, and spacer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Heavy Duty Steel Pulley for Freightliner Trucks
  • Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth (Part No.89105)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth

from

$45.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 58.125" Long, 8 Rib Count, Exact Fit (Part No.K080575HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 58.125" Long, 8 Rib Count, Exact Fit

from

$88.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080570)

Micro-V« Serpentine Drive Belt

from

$66.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 99.125" Long, 12 Rib Count, Exact Fit (Part No.K120985HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 99.125" Long, 12 Rib Count, Exact Fit

from

$106.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89419)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$133.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89440)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$179.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89420)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$92.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910503A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$184.99
This Litens supplied tensioner is manufactured to original equipment specifications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt), saving you time!
  • Installation instructions included
See More

Dayco – Serpentine Assy. Idler/Tensioner Pulley; Steel, 77mm Dia., 30mm Width, 6 Grooves (Part No.89171)

Serpentine Assy. Idler/Tensioner Pulley; Steel, 77mm Dia., 30mm Width, 6 Grooves

from

$56.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today.
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth (Part No.89101)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth

from

$44.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 38.3mm Width, Smooth (Part No.89111)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 38.3mm Width, Smooth

from

$86.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 37.5mm Width, 8 Grooves (Part No.89112)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 37.5mm Width, 8 Grooves

from

$81.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter (Part No.900120A)

Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter

from

$41.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
  • Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
  • Installation instructions included.
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter, w/ Hardware (Part No.900506A)

Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter, w/ Hardware

from

$63.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Kenworth. Peterbilt, Freightliner, and Western Star. Comes pre-assembled with a new installation bolt and washer. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38076)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$74.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 42.6mm Width, Smooth (Part No.89109)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 42.6mm Width, Smooth

from

$65.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Dayco – Straight Heater Hose: EPDM Rubber, Universal Fit, 3/4" Inside Diameter (Sold by foot) (Part No.80273)

Straight Heater Hose: EPDM Rubber, Universal Fit, 3/4" Inside Diameter (Sold by foot)

from

$0.99
Specifically designed to carry the heated coolant from the engine block to the heater core under the dashboard and return it to the engine, this Dayco Standard Heater Hose is constructed using all EPDM compounds and spiral reinforcement for high burst strength and excellent heat resistance. Made for general service on light trucks and passenger cars, this hose is similar to SAE 20R3, Class D-2 and has a temperature rating of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). This Dayco Standard Heater Hose is compatible with all common coolant and coolant additives. Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:
  • Specifically designed to be compatible with all common coolants and coolant additives
  • Constructed using all EPDM compounds and spiral reinforcements
  • Similar to SAE 20R3, Class D-2
  • Has a high burst strength and excellent heat resistance of -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot) (Part No.77300GL)

Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot)

from

$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

Upgrade your 2003 Freightliner Classic with Top-Quality Belts and Hoses

When it comes to maintaining or upgrading your 2003 Freightliner Classic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Freightliner or enhancing its overall performance, Belts and Hoses are key to keeping your Classic functioning at its best. At Advance Auto Parts, we offer a wide selection of 44 Belts and Hoses for the 2003 Freightliner Classic, designed to meet your needs without breaking the bank. From Serpentine and V Belt replacements to Radiator Hoses upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2003 Freightliner Classic at great prices. Our Belts and Hoses inventory for this model ranges from just $2.49 to $257.99, with an average price of $85.45. Our 44 Belts and Hoses in stock come from 4 trusted brands, so you’re sure to find the right part for your 2003 Freightliner Classic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Freightliner Classic, we stock popular OEM and aftermarket Belts and Hoses from top names like Dayco, and more. Dayco Belts and Hoses start at just $2.49 and boast an impressive 5 stars average rating from customers. With 3 customer reviews and counting, our 2003 Freightliner Classic Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Fluids and Chemicals and more to make sure your 2003 Freightliner Classic is always ready to roll. We’re committed to providing you with everything you need to keep your Classic in top shape, all in one place. Start shopping confidently below for your 2003 Freightliner Classic!

Best-Selling Serpentine and V Belts for 2003 Freightliner Classics

Enhance the driving experience in your Freightliner with 25 quality Serpentine and V Belt components, starting at $16.99.

Dayco – Poly Rib Belt Serpentine Belt; 54.75 Long, 6 Rib Count (Part No.5060548)

Poly Rib Belt Serpentine Belt; 54.75 Long, 6 Rib Count

from

$27.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt Serpentine Belt; 52.36 Long, 6 Rib Count (Part No.5060523)

Poly Rib Belt Serpentine Belt; 52.36 Long, 6 Rib Count

from

$35.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 58 Long, 8 Rib Count, Heavy Duty (Part No.5080580)

Poly Rib Belt HD Serpentine Belt; 58 Long, 8 Rib Count, Heavy Duty

from

$64.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth (Part No.89101)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth

from

$44.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K060547HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$37.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Driveworks – Poly Rib Belt Serpentine Belt; 54.75 Long, 6 Rib Count (Part No.548K6)

Poly Rib Belt Serpentine Belt; 54.75 Long, 6 Rib Count

from

$16.99
This Driveworks v-belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks v-belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
  • Meets OEM requirements
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 57.09 Long, 8 Rib Count, Heavy Duty (Part No.5080570)

Poly Rib Belt HD Serpentine Belt; 57.09 Long, 8 Rib Count, Heavy Duty

from

$56.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Dayco – V-Belt, Top Cog (Part No.17525)

V-Belt, Top Cog

from

$27.49
Dayco® High Performance V-Belt is the workhorse of the heavy-duty industry. Polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The laminated construction helps absorb greater shock loads associated with diesel engines. These Dayco® High Performance V-Belt advantages translate into less downtime, lower maintenance costs, and increased dependability. Dayco’s High Performance V-Belt meets or exceeds SAE J636 and J637 specifications.

Product Features:
  • The High Performance V-Belt design delivers more flexibility and increases airflow around the belt, so it runs cooler and lasts longer than most competitive belts
  • Polyester cord provides maximum power transfer and tension holding capability for the life of the belt
  • The laminated construction helps absorb greater shock loads associated with diesel engines
  • Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds
See More

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 37.5mm Width, 8 Grooves (Part No.89112)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 37.5mm Width, 8 Grooves

from

$81.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 85.375" Long, 8 Rib Count, Exact Fit (Part No.K080850HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 85.375" Long, 8 Rib Count, Exact Fit

from

$105.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 94.5 Long, 8 Rib Count, Heavy Duty (Part No.5080945)

Poly Rib Belt HD Serpentine Belt; 94.5 Long, 8 Rib Count, Heavy Duty

from

$68.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – Automotive XL« High Capacity V-Belt (Part No.9525)

Automotive XL« High Capacity V-Belt

from

$32.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:
  • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
  • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
  • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
  • Resists oil, heat, ozone, weather and aging for improved belt life
  • Meets or exceeds SAE J636C specifications
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K080570HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$87.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Dayco – Poly Rib Belt HD Serpentine Belt; 85 Long, 8 Rib Count, Heavy Duty (Part No.5080850)

Poly Rib Belt HD Serpentine Belt; 85 Long, 8 Rib Count, Heavy Duty

from

$38.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:
  • Engineered to handle operating conditions with temperatures up to 130°C (266°F)
  • Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
  • Capable of delivering excellent performance in high torque and high power pulse applications
  • Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
See More

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9525HD)

FleetRunner« Heavy-Duty V-Belt

from

$34.99
Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at extremely prolonged operating temperatures
  • Heavy-duty construction resists cracking, wear, oil and heat
  • Special compound provides unmatched stability, load carrying capacity and belt life
  • Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
  • Problem solver for troubled drives
  • Engineered to save your fleet money and reduce downtime
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – Notched V-Belt: 53.29" Long, 3 Strands, Exact Fit (Part No.3/9525PB)

Notched V-Belt: 53.29" Long, 3 Strands, Exact Fit

from

$131.99
Designed for problem, heavy-duty, heavily vibrating applications requiring belt sets. Tie-band feature joining belts together ensures stability lacking in ordinary belt sets.

Product Features:
  • Unique tensile cord design gives belt extra strength, added flexibility and shock-load resistance
  • Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
  • Even load distribution between strands provides better shock-load absorption
  • Eliminates belt turnover or belts jumping off the drive
  • Meets or exceeds SAE J636 specifications
  • Meets RMA oil and heat resistant standards and static conductivity requirements
See More

Gates – FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt (Part No.K080944HD)

FleetRunner« Heavy-Duty Micro-V« Serpentine Drive Belt

from

$100.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 58.625" Long, 8 Rib Count, Exact Fit (Part No.K080580HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 58.625" Long, 8 Rib Count, Exact Fit

from

$87.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080944)

Micro-V« Serpentine Drive Belt

from

$82.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080570)

Micro-V« Serpentine Drive Belt

from

$66.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K080580)

Micro-V« Serpentine Drive Belt

from

$59.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – V-Ribbed (Heavy Duty) Serpentine Belt: 52.875" Long, 6 Rib Count, Exact Fit (Part No.K060523HD)

V-Ribbed (Heavy Duty) Serpentine Belt: 52.875" Long, 6 Rib Count, Exact Fit

from

$44.99
Gates FleetRunner Micro-V Belts are designed for the toughest applications. FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:
  • Patented material provides peak performance at prolonged extreme operating temperatures
  • Heavy-duty construction resists cracking and wear, even at extreme temperatures
  • Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
  • Problem solver designed for the toughest applications
  • Consistently outperforms other heavy-duty serpentine belts on the market
  • Engineered to save your fleet money and reduce downtime
  • Tensioner Replacement is Recommended (if equipped)
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060523)

Micro-V« Serpentine Drive Belt

from

$31.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060547)

Micro-V« Serpentine Drive Belt

from

$30.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Heavy Duty Serpentine Belt; 54.75 Long, 6 Rib Count (Part No.5060548SC)

Heavy Duty Serpentine Belt; 54.75 Long, 6 Rib Count

from

$28.99
Developed using real-world track data, the Dayco supercharger belt is engineered with a proprietary EPDM construction with aramid cords and either 8 or 10 ribs depending on application. This belt is designed for late model high-performance supercharged street cars like ZR1 Corvettes, Shelby Mustangs and SRT Hellcat applications and is part of a line of racing belts engineered to provide maximum performance under the most extreme conditions. Comprised of specially blended compounds that are application specific, these belts are some of the strongest, most flexible belts on the market today.

Product Features:
  • Aramid fiber loaded EPDM construction and high stiffness PET cords eliminate belt stretch 
  • Proven to provide extreme durability and reduced slip under high boost conditions 
  • Tested by top level Drag Pak competitors, including Watson Racing, using roots style superchargers 
See More

Most Popular 2003 Freightliner Classic Radiator Hoses

Customize your Freightliner with 1 Radiator Hoses products like Coolant Hoses, all priced under $2.49.

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch) (Part No.77250GL)

Straight Radiator Hoses; EPDM Rubber, HD, 2 1/2 Inch Inner Dia. (Sold by inch)

from

$2.49
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Priced and sold by inch. See store for details.
See More

Top Picks for 2003 Freightliner Classic Heater Hoses

Upgrade Freightliner Classics with top-quality Heater Hoses parts, including 1 OEM and aftermarket selections for your 2003 model.

Dayco – Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot) (Part No.77300GL)

Straight Radiator Hoses; EPDM Rubber, HD, 3 Inch Inner Dia. (Sold by foot)

from

$2.99
Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40?F (-40?C) to +212?F (+100?C).

Product Features:
  • Capable of withstanding extreme temperatures and high-pressure environments
  • Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
  • Not suitable for fuel or oil transfer
  • PLEASE NOTE: Item is sold and priced by the foot. See store for details.
See More

In-Demand Belt Tensioners for 2003 Freightliner Classics

Select from 10 premium Belt Tensioners parts for your 2003 Freightliner Classic, with prices ranging from $92.99 to $257.99.

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910559A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$254.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Designed and engineered by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
  • Professional Mechanics will change this tensioner in approx. 1/2 hour
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89480)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$195.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89420)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$92.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38506)

FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner

from

$257.99
Product Features:
  • Optimized components engineered for maximum strength and durability
  • Patented design provides superior belt alignment and tension for improved drive efficiency and life
  • Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
  • Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
  • Double row bearings carry more load and last up to 3X longer than two individual bearings
  • Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
  • Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910017A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$199.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by one of the largest supplier of original equipment (O.E.) belt tensioners in the world. While the appearance is slightly different from the original equipment part, the Litens part maintains the original form, fit, and function specifications. This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Caterpillar C15/C7/3406/C16 engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers to ensure proper form, fit, and performance
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
  • Professional Mechanics will change this tensioner in approx. 1/2 hour
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
  • Belt removal is required to change the tensioner. Therefore, doing both together will extend accessory drive life and lower overall labor versus performing these services separately.
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910019A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$173.99
This Heavy Duty Truck and Bus tensioner is designed and engineered by Litens – the world’s largest supplier of original equipment (O.E.) belt tensioners in the world. The Litens replacement part meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). This part is manufactured to meet or exceed the performance and life specifications of the O.E. part. The part features a premium chrome-silicon steel spring, internal damping, a “lift-lug” feature for ease of installation, Tandem 6303 ball bearings, a molded locator pin for precise installation, and a forged steel pulley. Specifically designed for a wide variety of trucks and buses with a Detroit Diesel Series 60 or Mercedes-Benz MBE 4000 engine. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Designed and engineered by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
  • Installation instructions included.
  • Heavy Duty Electro-deposited coated (e-coat) Steel Pulley for superior corrosion resistance.
  • Professional Mechanics will change this tensioner in approx. 1/2 hour
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89485)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$134.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Includes installation instructions
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89419)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$133.99
For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life.
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Dayco No Slack Gold Label – Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque (Part No.89436)

Serpentine Belt Tensioner; 1 Piece, HD, Engineered To Handle Higher Torque

from

$129.99
For heavy-duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing – a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:
  • Designed to prevent fluctuations to the tensioner body for longer service life
  • Reduces the risk of noise and helps avoid housing separation
  • Includes pulleys with lubricated bearings for longer lasting performance
  • Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability
See More

Litens – Accessory Drive Belt Tensioner – Original Equipment Quality (Part No.910005A)

Accessory Drive Belt Tensioner - Original Equipment Quality

from

$104.99
This Litens supplied tensioner is manufactured to original equipment specifications. This part is specifically designed for Freightliner / Sterling Truck applications. Heavy duty steel pulley construction ensures long life and trouble-free performance. This tensioner meets or exceeds all original equipment fit, form, and performance characteristics. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. Our line is made up of over 900 ADTs, Pulleys, and OADs. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Internal “round spring” technology to provide constant belt tension and alignment throughout its service life.
  • Heavy duty steel pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • All hardware included for easy installation (Bolt), saving you time!
  • Installation instructions included
  • Accessory drive belts and tensioners are manufactured with similar design life targets. Since belt removal is required to change the tensioner, replacing both will extend the system service life and lower labor costs versus individual replacement.
See More

Most Sold 2003 Freightliner Classic Pulleys

Explore our best-selling Freightliner parts for the 2003 Classic among 7 OEM and aftermarket options starting from $41.99.

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth (Part No.89105)

Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 32.8mm Width, Smooth

from

$45.99
Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:
  • Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
  • Premium OE technology to ensure peak performance under extreme conditions
  • Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
  • Meets or exceeds OE quality
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.36231)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$148.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Litens – Idler Pulley: Direct Fit, Steel, 75mm Diameter (Part No.900274A)

Idler Pulley: Direct Fit, Steel, 75mm Diameter

from

$92.99
This pulley is manufactured by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Kenworth, Freightliner, International, Peterbilt, and Sterling. Comes complete with new bolt and dust shield. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38075)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$82.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 75mm Diameter (Part No.900041A)

Idler/Tensioner Pulley: Direct Fit, Steel, 75mm Diameter

from

$53.99
This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Freightliner, Kenworth, Peterbilt, Sterling, and Western Star. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.36091)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$44.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter (Part No.900120A)

Idler/Tensioner Pulley: Direct Fit, Steel, 74mm Diameter

from

$41.99
This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance.
  • Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
  • Installation instructions included.
See More

Top-Rated Belts and Hoses Brands For Your 2003 Freightliner Classic

Shop for the best-rated brands offering Belts and Hoses and other products for your 2003 Freightliner Classics. Below you’ll find some of our best rated Belts and Hoses from Dayco, and more. Belts and Hoses from these brands that fit a 2003 Classic start at just $2.49 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.

Popular Dayco 2003 Freightliner Classic Belts and Hoses

When it comes to maintaining or upgrading your 2003 Freightliner Classic, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2003 Freightliner Classic. With over 18 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $67.55. Plus, with over 3 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Poly Rib Belt HD Serpentine Belt; 58 Long, 8 Rib Count, Heavy Duty
from
$64.99
This product is not rated

Poly Rib Belt HD Serpentine Belt; 58 Long, 8 Rib Count, Heavy Duty

“”

Poly Rib Belt HD Serpentine Belt; 57.09 Long, 8 Rib Count, Heavy Duty
from
$56.99
This product is not rated

Poly Rib Belt HD Serpentine Belt; 57.09 Long, 8 Rib Count, Heavy Duty

“”

FAQs for 2003 Freightliner Classic Belts and Hoses

Which Belts and Hoses are best-sellers for 2003 Freightliner Classics?

Out of 44 Belts and Hoses that fit 2003 Freightliner Classics, the following parts are the top sellers:

What’s the price range for 2003 Freightliner Classic Belts and Hoses?

Belts and Hose prices for the 2003 Freightliner Classic start at $2.49 and go up to $257.99 for the most premium parts.

What’s the average price of a Belts and Hose for a 2003 Freightliner Classic?

The average price for Belts and Hoses for the 2003 Freightliner Classic is $85.45. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Belts and Hoses for other Freightliner Classic model years?

Yes, we currently carry Belts and Hoses for 10 model years of Freightliner Classics between 2001 and 2011. Belts and Hoses are bought most frequently for the following model years: 2011, 2010, 2009, 2008, 2007, 2006, 2005, 2004, and 2002.

What are the cheapest Belts and Hoses for my 2003 Freightliner Classic?

The cheapest 2003 Freightliner Classic Belts and Hoses we carry in stock are:

What are the top-rated Belts and Hoses that fit the 2003 Freightliner Classic?

Out of 3 reviews by customers, our 2003 Freightliner Classic Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2003 Freightliner Classic and their top-rated products:

What types of Belts and Hoses do you sell for my 2003 Freightliner Classic?

Can I get help with 2003 Freightliner Classic Belts and Hose orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Freightliner Belts and Hoses and more.

What is your return policy for Freightliner Classic Belts and Hoses?

Advance Auto Parts keeps returns simple. For new Freightliner Classic Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.