from

$7.99

Replacement pinion nut for Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan rear. 1 5/16″ nut, 7/8″ x 14 thread.

Product Features:

Pinion nut for Jeep JK rear, Dana Spicer 44HD, 60, 70, 70U, 70HD and Nissan Titan rear
7/8″ x 14 thread
1 5/16″ socket

from

$159.99

Dana 44-HD (HD design ONLY ) TracLoc clutch set.

Product Features:

Clutch kit
Fits Dana Spicer 44HD Trac Loc positraction

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$125.99

Product Features:

Fits Dana Spicer 44HD
Steel

from

$153.99

M802048 set-up bearing (one bearing). No return.

Product Features:

Set up bearing
Fits M802048 pinion bearing
Easily slips on and off pinion journal to allow for easier pinion depth adjustment

from

$44.30

Differential Pinion Bearing

from

$639.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits Dana Spicer 44HD
8.50″ ring gear diameter
26 spline pinion
10 ring gear bolts
4.11 ratio

from

$271.99

Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a u/bolt style yoke.

Product Features:

Fits Dana Spicer 60 and 70
29 spline
1330 u-joint size
Outside snap ring design
3.625″ snap ring span
1.062″ cap diameter
U-bolt style

from

$51.99

Product Features:

Carrier shim kit for Dana Spicer 44HD

from

$99.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA-44 JEEP SUPER 44 MASTER KIT 1996 AND LATER ZJ & WJ

from

$394.99

Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.

Product Features:

Fits Dana Spicer 44HD in 1984-1996 Chevy Corvette
Fits Dana Spicer 44HD in 1991-2009 Dodge Viper
Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.

from

$12.29

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$13.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$7.99

7/16″ TO 3/8″ ring gear bolt spacer sleeve.

Product Features:

Ring gear bolt sleeve
Adapts 7/16″ to 3/8″

from

$689.99

Product Features:

Standard open carrier case
Includes spider gears
Fits Dana Spicer 44HD

from

$23.71

3 oz. tube, carded – OEM specified. Specially formulated to withstand the harsh gear oil environment found in differentials and transfer cases. Because gear oil has friction modifiers that break down normal RTV and cause leaking, this specialty silicone has been tested to OEM specifications to ensure complete sealing. As a gasket maker, it seeks and seals leak paths that cut gaskets cannot. It can also be used to seal cut gaskets. Suggested Applications: Differentials and transfer cases. DIRECTIONS:

Product Features:

For best results, clean and dry all surfaces with a residue-free solvent, such as Permatex® Brake and Parts Cleaner.
Cut nozzle to desired bead size: gaskets are best formed using a 1/16? to 1/4? (2 to 6 mm) bead.
Apply a continuous and even bead of silicone to one surface; surround all bolt holes. Assemble parts immediately. Finger tighten bolts until material begins to squeeze out around flange. Allow to dry for one hour then re-tighten 1/4 to 1/2 turn.
Silicone dries in 1 hour, and fully cures in 24 hours. Allow more time in cold or very dry conditions.
Replace cap after use. Note: Not recommended for use on head gaskets or parts in contact with gasoline. Store below 80°F (27°C). TECHNICAL DATA SHEET

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$7.49

High-quality Differential Component Shim

Product Features:

SHIM KIT FITS-8.25-F7.5-AMC20-GM0

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$69.99

Valvoline SAE 75W-140 Full Synthetic Gear Oil provides the ultimate gear protection in hypoid rear differentials and non-synchronized manual transmissions. Engineered to outperform, our formulation provides exceptional high and low temperature protection and excellent thermal stability, especially in demanding driving situations such as towing and off-roading. It contains an extreme pressure additive for better load carrying capacity and wear resistance, a limited slip additive for optimal clutch pack performance, and an anti-foaming agent for better lubrication and service life. It’s recommended for conventional rear axles and transmissions requiring EP gear lubes under high speed, high load, high torque and high horsepower conditions.

Product Features:

EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION ranging from -22F to 390F degrees
REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
MEETS THE DEMANDS OF CONVENTIONAL AND LIMITED SLIP REAR DIFFERENTIALS where API GL-5 is specified, as well as non-synchronized manual transmissions that require API GL-4
MEETS OR EXCEEDS PERFORMANCE REQUIREMENTS for Ford M2C-192A, GM 12346140, Chrysler MS-8985 and API GL-5

from

$99.99

Redline Synthetic “Shock Proof” Oil. 3 Quarts.

Product Features:

Includes three quarts of Redline Shockproof oil

from

$217.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Dana 44HD differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits Dana Spicer 44HD
Includes carrier bearings and races and carrier shim kit

from

$238.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 44HD in Corvette and Viper
Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.

2003 Dodge Viper Differentials

More 2003 Dodge Viper Differentials

Essential 2003 Dodge Viper Differentials

Yukon Gear – Pinion Nut For Dana 44 JK, 44HD, 60, 70, 70U, 70HD & Nissan Titan Rear 1 5/16" Nut 7/8" X 14 Thread (Part No.33144)

Yukon Gear – Dana 44-HD (HD Design Only ) Tracloc Clutch Set (Part No.16150)

Driveworks – Oil Seal (Part No.S-9316)

Yukon Gear – Steel Cover For Dana 44HD (Part No.32317)

Yukon Gear – Set Up Bearing (Part No.56045)

SKF – Differential Pinion Bearing (Part No.J702048752SKF)

Yukon Gear – High Performance Replacement Ring & Pinion Gear Set For Dana 44-HD In A 4.11 Ratio (Part No.24050)

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41025)

Yukon Gear – Replacement Carrier Shim Kit For Dana 44HD (Part No.55016)

Motive Gear – Differential Bearing Kit – Timken (Part No.RA28JLRT)

Yukon Gear – Master Overhaul Kit For Dana 44-HD Differential For ’84-’96 Corvette And Viper (Part No.14033)

Pro-King – Crush Sleeve (Part No.714B034)

National – Multi Purpose Seal (Part No.473227V)

National – Bearings (Part No.25520)

Yukon Gear – 7/16" To 3/8" Ring Gear Bolt Spacer Sleeve. (Part No.33056)

Yukon Gear – Replacement Standard Open Carrier Case & Spiders For Dana 44HD (Part No.20055)

Permatex – Gear Oil RTV Gasket Maker (Part No.3G350374768PMX)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Valvoline – SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon (Part No.887344)

Yukon Gear – Redline Synthetic "Shock Proof" Oil – 3 Quarts (Part No.15000)

Yukon Gear – Carrier Installation Kit For Dana 44HD Differential (Part No.57004)

Yukon Gear – Pinion Install Kit For Dana 44 -HD Ica Differential For Corvette Or Viper (Part No.13029)

Popular 2003 Dodge Viper Differentials Categories

2003 Dodge Viper Differentials

Differentials Brands To Make Your 2003 Dodge Viper Last

Popular Royal Purple Differentials

Top 2003 Dodge Viper Differentials from Valvoline

FAQs for 2003 Dodge Viper Differentials

What are the most purchased Differentials for the 2003 Dodge Viper?

More Popular Parts for All Makes