2003 Dodge Ram 2500 Exhaust Parts
Find Your Specific 2003 Dodge Ram 2500 Exhaust Parts
Below you will find various in-demand Dodge Exhaust Parts, components and accessories for your 2003 Ram 2500. Advance Auto Parts has popular Ram 2500 parts like Exhaust Mufflers, Exhaust Manifold and Headers, Exhaust Fittings and more. You’ll also find aftermarket and OEM Exhaust Parts for other Ram 2500 model years including
1998,
2000,
2004,
2005,
2006,
2007,
2008,
2009,
2010 and more. Select a category of 2003 Dodge Ram 2500 Exhaust Parts below and start saving instantly.
Popular 2003 Dodge Ram 2500 Exhaust Parts Categories
Essential Exhaust Parts for 2003 Dodge Ram 2500s
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.60111)
from
$480.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60111. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82312)
from
$1355.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03211)
from
$33.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03309)
from
$50.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
MagnaFlow – Performance Exhaust Tailpipe (Part No.15397)
from
$164.99
The MagnaFlow Performance Exhaust Tailpipe 15397 is engineered as a universal component for your truck’s exhaust system and optimized for superior flow characteristics and performance. 15397 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
MagnaFlow – Exhaust Diesel Pipe (Part No.15451)
from
$111.99
The MagnaFlow 4″ X 34″ Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Superior flow & performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Walker – Exhaust Clamp (Part No.35753)
from
$6.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Down Pipe V-Band Clamp (Part No.904-353)
from
$95.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
- Ideal solution – engineered to help ensure secure connections between exhaust system components.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust System Hanger Insulator (Part No.35646)
from
$7.79
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
aFe POWER – Exhaust Manifold (Part No.46-40034)
from
$745.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe BladeRunner exhaust manifold for the popular 98.5-02 5.9L Dodge Ram Cummins (24V) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50% improving performance and throttle response. The thick wall (0.25in. vs. 0.15in.) design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 50%
- Improved Performance And Throttle Response
- Ported Flanges Ensure Excellent Seal And Stylist Look
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
aFe POWER – Exhaust Manifold (Part No.46-40054)
from
$855.99
The new ATLAS exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4-inch aluminized steel tubing for maximum flow, increased horsepower, increased torque and lower EGTs. The 2-piece tailpipe and bayonet style hangers provide a hassle-free installation. To provide a leak-free seal, OE style band clamps are used that offer a 360degree sealing area. Systems are available in 4-inch turbo back some offer the choice of a 4-inch down-pipe back with or without muffler. ATLAS exhaust systems are the perfect combination of performance, fit and value.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 49%
- Improved Performance And Throttle Response
- Cast-in EGR Flanges Allows Retention Of Fact. EGR System
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
Dorman – Help – Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (Part No.03125)
from
$15.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
aFe POWER – MACHForce-Xp Hanger (Part No.49-02001BR)
from
$88.99
The MACH Force XP tailpipe hanger kit is engineered to provide OE-style fitment and to stand up to the most extreme conditions. This bracket is recommended when installing 1994-1997 Dodge RAM 2500/3500 5.9L aFe Power Exhaust Systems. The MACH Force XP line-up is the perfect combination of fit and value.
Product Features:
See More
Product Features:
- Durable Construction/10 Gauge Mild Steel
- OE Style Bayonet Hangers Maintain A Stable Pipe Location
- Stands Up To The Most Extreme Conditions
- Rubberized Isolation Mounts
Dynomax – Direct Fit Manifold Catalytic Converter: No Fabrication Needed, EPA Compliance (Part No.51072)
from
$112.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY – Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM – Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from stainless steel for durability and long life
- BETTER TOGETHER – Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.54953)
from
$78.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54637)
from
$365.99
Combining industry-leading coverage with a direct fit OE-style replacement, Walker Quiet-Flow muffler assemblies deliver a precision fit, superior flow and OE-style sound. Quiet-Flow muffler assemblies are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Flowmaster Inc. – Super 40 Series Muffler, 3in Offset Inlet 3in Center Outlet, Non-Reversible, Aggressive Sound (Part No.853046)
from
$154.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
Product Features:
See More
Product Features:
- Durable fully welded 409 stainless steel
- Noticeable interior resonance
- Deep aggressive exhaust note
- Excellent performance on high horsepower vehicles
- Made in the USA
Felpro – Exhaust Pipe Flange Gasket (Part No.61710)
from
$15.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.61759)
from
$11.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Install kit for mounting exhaust manifold to engine includes 12 -10X1.50mm bolts (Part No.03417B)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Mount Hardware Kit Stainless Steel (Part No.03309HP)
from
$55.99
The factory-style fasteners used to secure the exhaust manifold to the cylinder head on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains application-specific studs, bolts and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs, bolts and nuts required to install one exhaust manifold.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of M8-1.25 x 40mm exhaust manifold mounting studs, bolts and nuts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
aFe POWER – ATLAS DPF Back Exhaust System: No Tip, Aluminized Steel, Unleashes All Available HP (Part No.49-02016)
from
$593.99
Interested in a new exhaust system? Check out the ATLAS DPF-Back exhaust system by aFe. This system is constructed from 5 in. mandrel-bent aluminized steel tubing. Smooth transition bends allow for low turbulence, increasing horsepower, torque and lowering EGTs. Uses high quality band clamps and OE-style bayonet hangers. This unit uses all factory mounting locations to provide a quick, hassle-free installation. ATLAS exhaust systems are the perfect combination of performance, fit and value. All aFe exhaust systems are engineered and manufactured in out Corona, California manufacturing facility.
Product Features:
See More
Product Features:
- 5 in. Aluminized Steel Tubing
- Increased Flow And Performance
- High Quality Band Clamps
- Bayonet OE Style/Welded-On Hangers
MBRP Exhaust – Aluminized Steel, 4"Dia Pipe, Single Exhaust With Side Exit, Without Muffler/Tip (Part No.S6100PLM)
from
$419.99
Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound.
Product Features:
See More
Product Features:
- Exhaust System Kit Turbo Back System
- The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
- Vehicle Maintains Optimal Operating Temperatures
- 100 Percent Aluminized Steel
- Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
- Fits Right The First Time: Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
- Easy, Bolt-On Design, Makes Easy To Install
MBRP Exhaust – Aluminized Steel, 5"Dia Pipe, Single Exhaust With Single Side Exit (Part No.S61140PLM)
from
$524.99
Built from heavy duty aluminized steel our Performance Series exhaust systems offer a value price without compromising on the quality built into every component. While the seams are a major point of rust through with some budget systems our fully sealed tubing adds years to your system. Featuring a two-piece tail wee replaced the muffler with an MBRP muffler delete pipe to provide you with the ultimate in free flow exhaust. Constructed to the same specifications as our top of the line Pro Series we back this line with a 1 Year Warranty.
Product Features:
See More
Product Features:
- Built From Heavy Duty Aluminized Steel
- Features More Pulling Power, Improved Throttle Response, Greater Fuel Efficiency
- Minimizes Backpressure
- Offers A Value Price Without Compromising On The Quality Built Into Every Component
- Provides You With The Ultimate In Free Flow Exhaust
Felpro – Exhaust Manifold Gasket Set (Part No.MS 95480)
from
$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)
from
$43.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10278-01)
from
$20.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Upgrade your 2003 Dodge Ram 2500 with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2003 Dodge Ram 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Exhaust Parts are key to keeping your Ram 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 72 Exhaust Parts for the 2003 Dodge Ram 2500, designed to meet your needs without breaking the bank.
From
Exhaust Muffler
replacements to
Exhaust Manifold and Headers
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2003 Dodge Ram 2500 at great prices.
Our Exhaust Parts inventory for this model
ranges from just $4.99 to $1,634.99, with
an average price of $297.05.
Our 72 Exhaust Parts in stock come from 16 trusted brands, so you’re sure to find the right part for your 2003 Dodge Ram 2500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Dodge Ram 2500, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO, Walker, Dorman, and more.
FELPRO Exhaust Parts
start at just $7.49 and boast an impressive 5 stars average rating from customers.
Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $4.99, and at an average 4 stars rating.
With 730 customer reviews and counting, our 2003 Dodge Ram 2500 Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2003 Dodge Ram 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Ram 2500 in top shape, all in one place.
Start shopping confidently below for your 2003 Dodge Ram 2500!
Best-Selling Exhaust Mufflers for 2003 Dodge Ram 2500s
Enhance the driving experience in your Dodge with 7 quality Exhaust Muffler components, starting at $114.99.
Flowmaster Inc. – 50 Series Muffler, 3in Offset Inlet 3in Center Outlet, 18in long, Non-Reversible, Moderate Sound (Part No.9530560)
from
$247.99
Designed primarily for today’s heavy duty gas and diesel trucks, this muffler will deliver improved performance, throttle response and mileage. Featuring a deeper, moderate tone with minimal resonance, it is ideal for trucks with modified engines. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler Assembly 3" Inlet (ID) 3" Outlet (ID) (Part No.50464)
from
$118.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Dynomax – Ultra Flo Muffler: Universal Fit, Stainless Steel, 20" L, 3" In, 3" Out, Oval (Part No.17233)
from
$139.99
DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.
Product Features:
See More
Product Features:
- Stainless steel construction for lifelong protection
- 100% welded design for maximum durability
- Straight through design ensures unrestricted exhaust flow and reduces back pressure
- CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
- Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54607)
from
$281.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18965)
from
$129.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
- FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
- GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.100-8457)
from
$341.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.
See More
BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.100-5458)
from
$114.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.
See More
Most Popular 2003 Dodge Ram 2500 Exhaust Manifold and Headers
Customize your Dodge with 12 Exhaust Manifold and Headers products
like Exhaust Manifold and Headers and
Exhaust Manifold and Header Hardware, all
priced under $1,634.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03211)
from
$33.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-906)
from
$221.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Direct Fit Exhaust Manifold: With Heat Shield (Part No.674-905)
from
$131.99
This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair.
Product Features:
See More
Product Features:
- Ideal replacement – this exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the stock manifold on specified vehicles.
- Reliable construction – durable materials resist warping, cracking and leaking for long-lasting performance.
- Complete repair – includes all necessary gaskets and downpipe hardware
- Trustworthy design – built by industry leader in aftermarket manifolds
Dorman – Help – Exhaust Manifold Stud (Part No.03211CD)
from
$40.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Exhaust Manifold Bolt Set (Part No.ES 75108)
from
$40.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
aFe POWER – Exhaust Manifold (Part No.46-40012)
from
$627.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The Bladerunner exhaust manifold out flowed the factory exhaust by 23-percent improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25″ vs 0.15″ for the stock unit), matched ports and has a merged runner design to maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.
Product Features:
See More
Product Features:
- Outflows The Factory Manifold By 23%
- Improved Performance And Throttle Response
- Ported Flanges Ensure Excellent Seal And Stylist Look
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
Dorman – Exhaust Manifold Kit (Part No.H1000683568DOR)
from
$325.99
More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Heat-shield may be included for protection of engine components where applicable
- Cast iron or stainless tubular construction protects against warping or cracking
- Leak-resistant for long-lasting performance
- A rigorous quality inspection has been undertaken to ensure product standards
aFe POWER – Connection Pipes (Part No.48-32017)
from
$1634.99
Constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, and corrosion resistant to eliminate cracking. A 1-3/4″ head pipe stepped to 2″ x .120 wall stainless steel tubing, is used to increase exhaust velocity and increase usable torque. This means a more aggressive throttle response and increased passing power. 100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks. Utilizes a divided diesel T-3 flange to increase exhaust velocity and turbo spool and boost
Product Features:
See More
Product Features:
- Mandrel Bent 304 Stainless Steel Tubing
- 3/8 in. Thick Head Flanges
- Compatible w/Factory Down-Pipes For Easy Install
- 100% MIG Welded
aFe POWER – Exhaust Manifold (Part No.46-40011)
from
$948.99
Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Bladerunner exhaust manifold for the popular 5.9L Dodge Ram Cummins sets the new standard. Constructed out of cast 304 stainless steel with a reinforcing rib for strength along the flange and ultra-thick wall flange at the port. The Bladerunner exhaust manifold out flowed the factory exhaust by 23-percent improving exhaust flow, performance and throttle response. This manifold also features 2 EGT probe ports, thick wall design for increased strength (0.25″ vs 0.15″ for the stock unit), matched ports and has a merged runner design to maximize exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and performance.
Product Features:
See More
Product Features:
- Outflows Factory Exhaust Manifolds By 23%
- Improved Performance And Throttle Response
- Thick Wall Design Increases Strength Eliminating Warping/Cracking
- Matched Ports And Merged Runner Design Reduce Exhaust Backpressure
JBA Performance – 1945S-1JT 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Titanium Ceramic (Part No.1945S-1JT)
from
$729.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1945S-1JT 1 1/2″ Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Titanium Ceramic
- Mandrel bent stainless steel tube
JBA Performance – 1945S-1JS 1 1/2" Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Silver Ceramic (Part No.1945S-1JS)
from
$714.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1945S-1JS 1 1/2″ Header Shorty Stainless Steel 96-02 Ram/Dakota/Durango Silver Ceramic
- Mandrel bent stainless steel tube
Taylor Gaskets – Vibe-Lock Bolt (Part No.310034)
from
$125.99
Vibe-Lock Bolt
Top Picks for 2003 Dodge Ram 2500 Exhaust Fittings
Upgrade Dodge Ram 2500s with top-quality Exhaust Fittings parts, including 4 OEM and aftermarket selections for your 2003 model.
Walker – Exhaust Clamp (Part No.35794)
from
$10.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35753)
from
$6.29
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Exhaust Down Pipe V-Band Clamp (Part No.904-253)
from
$49.99
This exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles. Manufactured from quality materials for reliability, it is engineered to help ensure secure connections between exhaust system components.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust clamp is designed to match the function of the original equipment clamp on specified vehicles.
- Ideal solution – engineered to help ensure secure connections between exhaust system components.
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
AP Exhaust – Exhaust Clamp (Part No.H80201185228APE)
from
$15.36
Exhaust Clamp
In-Demand Exhaust Pipes for 2003 Dodge Ram 2500s
Select from 16 premium Exhaust Pipes parts for your 2003 Dodge Ram 2500, with prices ranging from $4.99 to $163.99.
Walker – Exhaust Pipe Flange Gasket (Part No.31348)
from
$4.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Tail Pipe 3" Inlet (OD) 3" Outlet (OD) (Part No.56211)
from
$66.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.52476)
from
$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
MagnaFlow – Performance Exhaust Tailpipe (Part No.15452)
from
$163.99
The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck’s exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Felpro – Exhaust Pipe Flange Gasket (Part No.61240)
from
$7.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dynomax – 36474 Exhaust Pipe Spout (Part No.36474)
from
$51.99
Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Tail Pipe 3.5" Inlet (OD) (Part No.56171)
from
$127.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Walker – Exhaust Pipe 3.5" Inlet (ID) 3.5" Outlet (OD) (Part No.54606)
from
$68.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dynomax – 36477 Exhaust Pipe Spout (Part No.36477)
from
$51.99
Customize your exhaust system with a DynoMax® stainless steel tip. Made of high-grade 304 polished stainless steel, DynoMax exhaust tips are available in a variety of sizes making it easy to bolt on a custom look.
Product Features:
See More
Product Features:
- CUSTOM LOOK — Enhance your exhaust system with this tip that features an embossed DynoMax® logo
- SINGLE-WALL DESIGN — Features one layer of premium 304 polished stainless steel that is slant-cut for a sleek look
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of sizes to work with a wide range of exhaust systems
- EASY TO INSTALL — Clamp-on installation for an easy upgrade
- BETTER TOGETHER — Use premium DynoMax® accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Pipe 3" Inlet (ID) 3" Outlet (OD) (Part No.54776)
from
$57.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Dorman – Exhaust Manifold Kit (Part No.H1000776985DOR)
from
$158.82
More like a complete kit than a single part, many of our Exhaust Manifolds include gaskets and hardware for a complete installation. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience. Since this part is a direct replacement, the exact fit adds another layer of efficiency and convenience.
Product Features:
See More
Product Features:
- Heat-shield may be included for protection of engine components where applicable
- Cast iron or stainless tubular construction protects against warping or cracking
- Leak-resistant for long-lasting performance
- A rigorous quality inspection has been undertaken to ensure product standards
Dynomax – Exhaust Intermediate Pipe (Part No.53750)
from
$152.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
MagnaFlow – Performance Exhaust Tailpipe (Part No.15395)
from
$160.00
The MagnaFlow Performance Exhaust Tailpipe 15395 is engineered as a universal component for your truck’s exhaust system and optimized for superior flow characteristics and performance. 15395 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Dynomax – Exhaust Intermediate Pipe (Part No.54734)
from
$120.99
Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
- DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from stainless steel for durability and long life
- BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
Walker – Exhaust Pipe 2.375" Inlet (OD) (Part No.53796)
from
$116.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
MagnaFlow – Exhaust Diesel Pipe (Part No.15451)
from
$111.99
The MagnaFlow 4″ X 34″ Extension 15451 includes a 34in. long, 4in. diameter stainless steel pipe optimized for superior flow characteristics and performance. 15451 is produced using precision CNC robotic manufacturing techniques and features 100% durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Product Features:
See More
Product Features:
- Superior flow & performance
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
Most Sold 2003 Dodge Ram 2500 Exhaust Hangers
Explore our best-selling Dodge parts for the 2003 Ram 2500 among 2 OEM and aftermarket options starting from $6.79.
Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)
from
$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.
Product Features:
See More
Product Features:
- OE DESIGN — Designed with OE-style features for easy installation and fit
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Dorman – Help – Exhaust Stud Kit – 3/18-16 x 2-1/2 In. (Part No.03125)
from
$15.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles.
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Exhaust Parts Brands For Your 2003 Dodge Ram 2500
Shop for the best-rated brands offering Exhaust Parts and other products for your 2003 Dodge Ram 2500s. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 2003 Ram 2500 start at just $4.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2003 Dodge Ram 2500 Exhaust Parts
When it comes to maintaining or upgrading your 2003 Dodge Ram 2500, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2003 Dodge Ram 2500. With over 5 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $22.59. Plus, with over 5 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Walker 2003 Dodge Ram 2500 Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2003 Dodge Ram 2500 owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2003 Ram 2500, Advance Auto Parts carries a full inventory of 18 Walker Exhaust Parts. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Walker Exhaust Parts range from $4.99 to $766.99, plus, with more than 91 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 2003 Dodge Ram 2500 Exhaust Parts
Which Exhaust Parts are best-sellers for 2003 Dodge Ram 2500s?
Out of 72 Exhaust Parts that fit 2003 Dodge Ram 2500s, the following parts are the top sellers:
- Exhaust Manifold Gasket Set (20780351) – $31.49
- Exhaust Manifold Stud (11712229) – $40.99
- Exhaust Manifold Hardware Kit (11198572) – $33.99
What’s the price range for 2003 Dodge Ram 2500 Exhaust Parts?
Exhaust Part prices for the 2003 Dodge Ram 2500 start at $4.99 and go up to $1,634.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2003 Dodge Ram 2500?
The average price for Exhaust Parts for the 2003 Dodge Ram 2500 is $297.05. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Dodge Ram 2500 model years?
What are the cheapest Exhaust Parts for my 2003 Dodge Ram 2500?
The cheapest 2003 Dodge Ram 2500 Exhaust Parts we carry in stock are:
- Exhaust Pipe Flange Gasket (18370038) – $4.99
- Exhaust Clamp (26010228) – $6.29
- Exhaust 35460 Exhaust System Hanger Insulator (5601657) – $6.79
- Exhaust Pipe Flange Gasket (20688666) – $7.49
- Exhaust Clamp (10083053) – $10.29
What are the top-rated Exhaust Parts that fit the 2003 Dodge Ram 2500?
Out of 730 reviews by customers, our 2003 Dodge Ram 2500 Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2003 Dodge Ram 2500 and their top-rated products:
- Exhaust Gaskets
- Exhaust Manifold Gasket Set (20780351) – $31.49
- Exhaust Manifold Set (11085166) – $25.49
- Exhaust Mufflers
- Exhaust Manifold Gasket Set (20780351) – $31.49
- Exhaust Manifold Set (11085166) – $25.49
- Exhaust Fittings
- Exhaust Manifold Gasket Set (20780351) – $31.49
- Exhaust Manifold Set (11085166) – $25.49
What types of Exhaust Parts do you sell for my 2003 Dodge Ram 2500?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2003 Dodge Ram 2500:
Can I get help with 2003 Dodge Ram 2500 Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Exhaust Parts and more.
What is your return policy for Dodge Ram 2500 Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Dodge Ram 2500 Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
