2003 Chevrolet S10 Performance and Racing Products
Find Your Specific 2003 Chevrolet S10 Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2003 S10. Advance Auto Parts has popular S10 parts like Performance Engines, Performance Distributors, Performance Steering Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other S10 model years including
1994,
1995,
1996,
1997,
1998,
1999,
2000,
2001,
2002 and more. Select a category of 2003 Chevrolet S10 Performance and Racing Products below and start saving instantly.
Popular 2003 Chevrolet S10 Performance and Racing Products Categories
Essential Performance and Racing Products for 2003 Chevrolet S10s
K&N – Cold Air Intake: Guaranteed To Increase Horsepower, With Washable Air Filter (Part No.57-3028)
from
$262.99
The K&N 57-3028 FIPK air intake system replaces the restrictive factory air filter and air intake assembly. K&N intakes are designed to dramatically reduce intake restriction allowing your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3028 air intake comes with a large, round K&N embossed chrome-topped high-flow air filter that funnels air directly into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 60 minutes or less. The tools needed are a screwdriver and a 10 millimeter wrench.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower
- Designed to improve throttle response and engine sound
- Replaces entire factory air intake system
- Easy to install, usually in 60 minutes or less
- Lasts up to 100,000 miles before service is required (depending on driving conditions)
- Washable and reusable lifetime air filter
- DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
- HIGH QUALITY: Made in America.
Energy Suspension – High Performance Transmission Mount for Street & Racing Vehicles (Part No.3.1108G)
from
$46.49
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.
Product Features:
See More
Product Features:
- Unique Safety Interlock Design
- Impervious to Vehicle Oils and Chemicals
- Strong Enough Too Handle High Performance
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2142G)
from
$123.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)
from
$53.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Control Arm Bushing Set (Part No.3.3162G)
from
$121.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)
from
$12.29
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – Hyper-Flex System (Part No.3.18106G)
from
$473.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)
from
$54.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Accel – Ignition/Electrical (Part No.130120)
from
$17.49
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.57-3025-1)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Coil Spring Isolator Set (Part No.9.6102G)
from
$47.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Motive Gear – Performance Differential Ring and Pinion (Part No.G875410)
from
$222.99Product Features:
- GM 10BL 7.5 &7.625 R/P 4.10 MGP 10 3/8 X 18 LH THRED BLTS, PD=1.438
Richmond Gear – RngPnn (Part No.49-0007-1)
from
$360.99
RngPnn
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)
from
$84.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Brass inserts provide for high spark energy flow
- Polyester Glass Filled For Durability
- Heavy duty for maximum energy transfer
Hays – Flexplate: Chevy 57-85 (153T) (Part No.10-012)
from
$170.99
Constructed of thicker than stock steel plate to withstand the stress of high stall speed converters and high RPM engine. Zinc dichromate plated to resist rust and corrosion. Meets SFI specification 29.1 for racing.
Product Features:
See More
Product Features:
- Thicker Than Stock Steel Plate
- Ring Gear Securely Welded
- Dual Bolt Patterns
- Zinc-Dichromate Plated To Resist Corrosion
- Withstands High Torque and RPM
B & M – Flexplate, 168 Tooth 86-94 Chevrolet Small Block (Part No.20239)
from
$213.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1994 GM (externally balanced) 4.3L V6 and GM small block V8 engines with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)
from
$173.99
As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.
Product Features:
See More
Product Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
Energy Suspension – Body Cab Mount Set (Part No.3.4130R)
from
$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Cab Mount Set (Part No.3.4132G)
from
$240.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Cab Mount Set (Part No.3.4131G)
from
$150.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Control Arm Bushing Set (Part No.3.3119R)
from
$88.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3170R)
from
$61.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Upgrade your 2003 Chevrolet S10 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2003 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 57 Performance and Racing Products for the 2003 Chevrolet S10, designed to meet your needs without breaking the bank.
From
Performance Engine
replacements to
Performance Distributors
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2003 Chevrolet S10 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $5.99 to $921.99, with
an average price of $239.48.
Our 57 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2003 Chevrolet S10 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2003 Chevrolet S10, we stock popular OEM and aftermarket Performance and Racing Products from top names
like K&N, Energy Suspension, Accel, and more.
K&N Performance and Racing Products
start at just $367.99 and boast an impressive 4.8 stars average rating from customers.
Energy Suspension and Accel also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.4 stars rating.
With 146 customer reviews and counting, our 2003 Chevrolet S10 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2003 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place.
Start shopping confidently below for your 2003 Chevrolet S10!
Best-Selling Performance Engines for 2003 Chevrolet S10s
Enhance the driving experience in your Chevrolet with 9 quality Performance Engine components, starting at $50.99.
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-422-8)
from
$611.99
Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L
Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-415-8)
from
$611.99
Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L
Competition Cams – Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-430-8)
from
$611.99
Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)
from
$50.99
ENGINE ROCKER ARM
Most Popular 2003 Chevrolet S10 Performance Distributors
Customize your Chevrolet with 2 Performance Distributors products
like Performance Distributor Rotors and
Performance Distributor Caps, all
priced under $84.99.
Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)
from
$84.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Brass inserts provide for high spark energy flow
- Polyester Glass Filled For Durability
- Heavy duty for maximum energy transfer
Top Picks for 2003 Chevrolet S10 Performance Steering Products
Upgrade Chevrolet S10s with top-quality Performance Steering Products parts, including 9 OEM and aftermarket selections for your 2003 model.
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$6.29
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Sway Bar Bushing Set (Part No.3.5207R)
from
$54.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.3.5207G)
from
$54.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Body Cab Mount Set (Part No.3.4131G)
from
$150.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Body Cab Mount Set (Part No.3.4130R)
from
$116.99
Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.
Product Features:
See More
Product Features:
- Assures Longer Lasting Cab to Bed Alignment
- Replace to Restore Ride Height
- Gain Durability
- Stronger Than Original Rubber Mounts
Energy Suspension – Sway Bar Bushing Set (Part No.3.5190R)
from
$51.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
Energy Suspension – Sway Bar Bushing Set (Part No.3.5122R)
from
$53.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.
Product Features:
See More
Product Features:
- Allows Sway Bar System to Work At 100% Efficiency
- Zerk Type Fittings
- Allows for Periodic Greasing
- Lasts Much Longer Than OEM Rubber Bushings
- Handling Characteristics Improve Dramatically
In-Demand Performance Suspension Products for 2003 Chevrolet S10s
Select from 7 premium Performance Suspension Products parts for your 2003 Chevrolet S10, with prices ranging from $12.29 to $473.99.
Energy Suspension – Control Arm Bump Stop Set (Part No.3.9102G)
from
$12.29
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Helps Prevent Damage to Control Arm
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2129G)
from
$73.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Control Arm Bushing Set (Part No.3.3162G)
from
$121.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Leaf Spring Bushing Set (Part No.3.2142G)
from
$123.99
Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Adds Dramatic Amount of Performance/Durability
- Helps Vehicle Be in Control
- Allows the Suspension to Function Properly
Energy Suspension – Coil Spring Isolator Set (Part No.9.6102G)
from
$47.99
Made of superior Hyper-Flex material. Saves replacing again and again, lasting 3 to 10 times longer. Assemble to chassis the same way as OEM isolators and do not adversely change ride characteristics.
Product Features:
See More
Product Features:
- Made of Superior Hyper-Flex+ Material
- Lasts from 3 to 10 Times Longer
- Assemble to Chassis Same Way as OEM
- Maintains Factory Ride Characteristics
- Simple Way to Increase Vehicle Height
Energy Suspension – Control Arm Bushing Set (Part No.3.3119R)
from
$88.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Hyper-Flex System (Part No.3.18106G)
from
$473.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Most Sold 2003 Chevrolet S10 Performance Air Intake Kits
Explore our best-selling Chevrolet parts for the 2003 S10 among 4 OEM and aftermarket options starting from $209.99.
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.57-3017-2)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9901)
from
$209.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.57-3025-1)
from
$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.
Product Features:
See More
Product Features:
- Guaranteed to increase horsepower and torque
- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
- Engineered to provide high airflow and exceptional filtration
- Replaces factory air filter and intake tube
- Filter only requires cleaning every 100,000 miles under normal highway driving conditions
- Typical installation can be completed in 60 minutes or less with simple hand tools
- No-Hassle Lifetime Limited Warranty
- Will not void vehicle warranty(limited)
Spectre – Spectre Air Intake Kit (Part No.9902)
from
$211.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.
Product Features:
See More
Product Features:
- DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
- BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
- IMPROVED ENGINE SOUND: Hear the power under the hood
- WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
- EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
- EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
- HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
- Will not void vehicle warranty(limited)
Top-Rated Performance and Racing Products Brands For Your 2003 Chevrolet S10
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2003 Chevrolet S10s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Energy Suspension, and Accel, and more. Performance and Racing Products from these brands that fit a 2003 S10 start at just $5.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular K&N 2003 Chevrolet S10 Performance and Racing Products
When it comes to maintaining or upgrading your 2003 Chevrolet S10, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2003 Chevrolet S10. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99. Plus, with over 22 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$367.99
(17)
Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter
“Instructions were very easy to read and follow for my installation.”
Popular Energy Suspension 2003 Chevrolet S10 Performance and Racing Products
Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2003 Chevrolet S10 owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 2003 S10, Advance Auto Parts carries a full inventory of 2 Energy Suspension Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $5.99 to $12.29, plus, with more than 5 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
from
$5.99
(3)
Tie Rod Dust Boot
“Replaced the old torn boot and added a bit of color for a low cost.”
FAQs for 2003 Chevrolet S10 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2003 Chevrolet S10s?
Out of 57 Performance and Racing Products that fit 2003 Chevrolet S10s, the following parts are the top sellers:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99
What’s the price range for 2003 Chevrolet S10 Performance and Racing Products?
Performance and Racing Product prices for the 2003 Chevrolet S10 start at $5.99 and go up to $921.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2003 Chevrolet S10?
The average price for Performance and Racing Products for the 2003 Chevrolet S10 is $239.48. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet S10 model years?
What are the cheapest Performance and Racing Products for my 2003 Chevrolet S10?
The cheapest 2003 Chevrolet S10 Performance and Racing Products we carry in stock are:
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Tie Rod Dust Boot (22906873) – $6.29
- Control Arm Bump Stop Set (22908356) – $12.29
- High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (22904340) – $32.99
What are the top-rated Performance and Racing Products that fit the 2003 Chevrolet S10?
Out of 146 reviews by customers, our 2003 Chevrolet S10 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2003 Chevrolet S10 and their top-rated products:
- Performance Steering Products
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
- Performance Air Intake Kits
- Tie Rod Dust Boot (17360821) – $5.99
- Tie Rod Dust Boot (17360833) – $5.99
What types of Performance and Racing Products do you sell for my 2003 Chevrolet S10?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2003 Chevrolet S10:
Can I get help with 2003 Chevrolet S10 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet S10 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet S10 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
