2003 Chevrolet Express 2500 TPMS Sensors

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

Huf Baolong Electronics (BH Sens) provides the market with OE Equivalent replacement sensors that function exactly like the OE sensor being replaced. The replacement tire sensors can be installed directly without programming, just relearn the sensors to the vehicle with a TPMS tool after install.

Huf Baolong Electronics (BH Sens) IntelliSens Universal Sensor (must be programmed prior to install) will function exactly like the OE sensors and match the quality of the OE sensor being replaced. The IntelliSens sensors can now be updated with new application using a TPMS Tool (never without the most coverage).

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader’s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader’s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.

The Adjustable Angle 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum screw-in valve stems. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.

This dual-frequency Dorman MULTi-FIT TPMS sensor covers 95% of the vehicles on the road today, including European models not covered in many competitors’ TPMS programs. Using our 974-505 MULTi-FIT II tool, the sensor can be programmed for both 315MHz and 433MHz applications on specified vehicles. The MULTi-FIT II tool can precisely and rapidly calibrate this sensor by vehicle specifications or clone it to match the sensor it’s replacing. The versatility, ease of installation and unrivaled range of vehicle coverage makes this sensor the perfect single-source repair solution. Manufactured by a brand known for more than a century for engineering excellence and quality assurance, you can install it with confidence, knowing it’s backed by a warranty you can trust. (MULTi-FIT II tool sold separately; part number 974-505).

ACDelco GM Original Equipment Tire Pressure Monitoring Sensors (TPMS) are battery powered sensors located in the tire that monitor the vehicle’s tire pressure and warn the driver when pressure falls more than 25% below the manufacturer’s recommendations (normally through a slow pressure loss), and are GM-recommended replacements for your vehicle’s original components. The sensor is connected with the valve stem and, by way of Radio Frequency (RF) technology, sends pressure updates to the vehicle’s on-board computer. Tire pressure is displayed on the vehicle’s Driver Information Center (DIC) or, when low, a warning light may be illuminated to warn the driver. U.S. Federal Regulations require that new cars and light trucks be equipped with TPMS starting in 2008. These original equipment tire pressure monitoring sensors have bn manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now, and into the future we will be there for you, our customer.

Schrader is the leading global manufacturer of tire pressure monitoring systems (TPMS), and its direct OE TPMS technology can be found in over 50% of vehicles globally. Matching OE quality and performance standards, Schrader sensors undergo extensive OE quality testing, including high speed and extreme temperature tests. Schrader€™s global presence as the leading OE supplier means that OE quality and performance come standard with Schrader€™s genuine OE replacement sensors. TPMS sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. A vehicle-specific relearn procedure must be performed after the sensor is installed, requiring a TPMS programming and diagnostic tool with OBD capability.

The CV-001 is a black metal press-in valve stem for the 1-Sensor.

The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.

REDI-Sensor sensors offer maximum application coverage, ease of use, and OE validation for fit, performance and reliability. REDI-Sensor replaces a host of OE sensors, including banded, snap-in and clamp-in type sensors. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Then, now and into the future we will be there for you, our customer.

Schrader, the leader in TPMS, introduces its latest innovation, AirCheck BLE, the ultimate solution for tire pressure monitoring for towable trailers. Recreational vehicles and trailers, motorhomes, and passeger cars without factory TPMS systems. Utilizing advanced Bluetooth Low Wnergy (BLE) technology, AirCheck BLE provies real-time alerts about tire pressure, temperature, and battery status, even when the app is running in the background. Experience the ultimate in tire safety and convenience with AirCheck BLE. Stay informed with real-time updates on tire pressure, temperatrue, and battery status for all connected sensors, ensuring you receive timely alerts and can take immediate action when needed.