2003 Chevrolet Express 2500 Drive Shafts and Axles

Essential 2003 Chevrolet Express 2500 Drive Shafts and Axles

Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

Thrust Washer Kit For GM 7.2" IFS Stub Shaft

from

$41.99
Product Features:
  • Thrust washer kit
  • Fits GM 7.2″ IFS
See More

Yukon Gear – AxleHubBolt (Part No.33583)

AxleHubBolt

from

$5.99
AxleHubBolt

Spicer – Universal Joint (Part No.5-160X)

Universal Joint

from

$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6071)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$92.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CADI 02-06; CHEV 97-12; DODGE 03-06; FORD 11-15; GMC 96-12; NISSAN 04-22;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1996-2022
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • WITHOUT PLATE
  • WITHOUT STUDS
  • EXTENDED DUST SHIELD
See More

Pro-King – Differential Axle Seal (Part No.743B074)

Differential Axle Seal

from

$6.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Inner Axle Retaining Snap Ring For 7.2" GM (Part No.33367)

Inner Axle Retaining Snap Ring For 7.2" GM

from

$8.99
Inner axle retaining snap ring for 7.2″ GM.

Product Features:
  • Stub axle snap ring
  • Fits GM 7.2″ IFS
See More

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Axle Shaft Lock Assortment

from

$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)

Pinion Yoke Dust Shield For Dana 60 & 70

from

$7.99
Product Features:
  • Pinion yoke dust shield
  • Fits Dana Spicer 60 and 70
See More

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)

Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size

from

$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:
  • Fits Dana Spicer 60, 70, 70U and 70HD
  • 29 spline
  • 1330 u-joint size
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Outside snap ring design
  • Strap style
See More

GM Genuine Parts – Front Drive Axle Inner Shaft Bearing (Part No.26053326)

Front Drive Axle Inner Shaft Bearing

from

$13.49
GM Genuine Parts Axle Shaft Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support and allow the axle shaft to rotate with minimal friction. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Supports and allows the axle shaft to rotate with minimal friction
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

National – Bearings (Part No.HK-4012)

Bearings

from

$24.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

SKF – Driveshaft Support with Bearing (Part No.K1030204346SKF)

Driveshaft Support with Bearing

from

$158.67
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.

Product Features:
  • OE Quality, fit and performance
  • Precise driveshaft alignment and support
  • Pre-lubricated and sealed
  • Metal reinforced seals to prevent contamination
  • Manufactured from durable rubber compounds
See More

National – Multi Purpose Bearing (Part No.HB-108-D)

Multi Purpose Bearing

from

$110.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Cardone – Front Drive Shaft: Greasable, Direct Replacement (Part No.65-1045)

Front Drive Shaft: Greasable, Direct Replacement

from

$363.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft (Part No.976-040)

Rear Drive Shaft

from

$1336.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Felpro – Drive Axle Shaft Flange Gasket (Part No.55350)

Drive Axle Shaft Flange Gasket

from

$4.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Unsurpassed quality you can trust
  • Validated for fit, form and function
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV548979)

CV Axle Shaft Assembly

from

$137.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

Yukon Gear – Axle Bearing & Seal Kit For 10.5" GM 14 Bolt Truck (Part No.10036)

Axle Bearing & Seal Kit For 10.5" GM 14 Bolt Truck

from

$178.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for GM 14T (full-floating). This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM 10.5″ 14 bolt truck
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)

R1561Tv Rear Axle Bearing And Seal Kit

from

$88.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits Ford and Dodge applications
  • Includes axle bearing and seal
  • Torrington Brand
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

Yukon Gear – GM 9.5" Rear Axle Bearing And Seal Kit (Part No.10003)

GM 9.5" Rear Axle Bearing And Seal Kit

from

$108.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit for semi-floating GM 9.5″, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Fits GM applications
  • Includes axle bearing and seal
  • Services one side
  • 2.985″ O.D.
  • 1.700″ I.D.
See More

EMPI/Empire – Axle Nut (Part No.K40301617413EMP)

Axle Nut

from

$4.93
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.M88010)

Bearings

from

$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.208-SL)

Bearings

from

$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

2003 Chevrolet Express 2500 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2003 Chevrolet Express 2500. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 38 different Drive Shafts and Axles in our inventory ranging from $4.79 to $874.99. That means you can find the exact parts or products you need to keep that 2003 Chevrolet Express 2500 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Chevrolet Express 2500. Felpro, Spicer, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2003 Chevrolet Express 2500, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 670 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.9 stars and Bearings with 4.8 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2003 Chevrolet Express 2500 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2003 Chevrolet Express 2500 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Chevrolet Express 2500 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Express 2500 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Driveworks Drive Shafts and Axles

We carry Driveworks parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 2003 Chevrolet Express 2500, our most popular Driveworks Drive Shafts and Axles include:
Universal Joint
from $31.99
(1)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2003 Chevrolet Express 2500 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2003 Chevrolet Express 2500?

Out of 38 Drive Shafts and Axles for the 2003 Chevrolet Express 2500, the most popular in our inventory are:
Drive Axle Shaft Flange Gasket
from $4.79
(11)
Drive Axle Shaft Flange Gasket
Axle Flange Gaskets
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $44.99
(7)
Universal Joint
Axle Shaft Universal Joints

What are the top-rated 2003 Chevrolet Express 2500 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2003 Chevrolet Express 2500 based on customer reviews/ratings are:
Multi Purpose Seal
from $17.99
(7)
Multi Purpose Seal
“Product as described.”
Bearings
from $10.49
(4)
Bearings
“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
Multi Purpose Bearing
from $110.99
(4)
Multi Purpose Bearing
“The parts person was very knowledgeable about the part I needed. I received the correct part not like the competition who tried to sell me the wrong p”