2003 Chevrolet C4500 Kodiak Differentials

Essential 2003 Chevrolet C4500 Kodiak Differentials

Yukon Gear – Replacement Pinion Depth Shims For Dana 80 (Part No.55024)

Replacement Pinion Depth Shims For Dana 80

from

$79.99
Product Features:
  • Pinion depth shim kit
  • Fits Dana Spicer 80 4.125″ design
See More

FAG US – SHAFT SEAL (Part No.SS3119)

SHAFT SEAL

from

$19.79
SHAFT SEAL

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Dana 60, Dana 70 & Dana 80 Cover Bolt

from

$5.99
3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:
  • Cover bolt for Dana Spicer 60, 70 and 80
  • 3/8″
See More

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.125" OD Only) (Part No.13036)

Pinion Install Kit For Dana 80 Differential (4.125" OD Only)

from

$319.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Set Up Bearing (Part No.56045)

Set Up Bearing

from

$153.99
M802048 set-up bearing (one bearing). No return.

Product Features:
  • Set up bearing
  • Fits M802048 pinion bearing
  • Easily slips on and off pinion journal to allow for easier pinion depth adjustment
See More

Yukon Gear – Replacement Yoke For Dana 80 With A 1550 U/Joint Size (Part No.41215)

Replacement Yoke For Dana 80 With A 1550 U/Joint Size

from

$349.99
Yukon replacement yoke for Dana 80 with a 1550 U/joint size. 4.964″ snap ring span, 1.375″ cap diameter. Outside snap ring.This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.
See More

Yukon Gear – Replacement Pinion Nut Washer For Dana 80 (Part No.33165)

Replacement Pinion Nut Washer For Dana 80

from

$5.99
Product Features:
  • Pinion nut washer
  • Fits Dana Spicer 80
See More

Yukon Gear – Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up (Part No.32173)

Steel Spool For Dana 80 With 37 Spline Axles, 4.10 & Up

from

$1060.00
Yukon Performance steel spool for 8Dana 80 with 37 spline axles, 4.10 & up. Yukon performance spools are made from the highest quality materials to ensure high strength and long life in performance applications. Spools provide 100% power to both tires at all times and are a lower cost alternative to lockers. Spools are not recommended for street driven vehicles. Yukon Performance spools come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Chrysler Dana Spicer 80 with 37 spline axles
  • 4.10 and up ratio only
  • Provides 100% traction to both wheels at all times
  • Not recommended for street driven vehicles
See More

Yukon Gear – Differential (Part No.26048)

Differential

from

$1145.00
Differential

Yukon Gear – Side Gear Thrust Washer For Dana 60, 70 & 80 (Part No.33532)

Side Gear Thrust Washer For Dana 60, 70 & 80

from

$4.99
Product Features:
  • Side gear thrust washer for Dana Spicer 60, 70, 70U, 70HD and 80
  • Fits standard open differentials only
See More

Yukon Gear – Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80 (Part No.55011)

Replacement Carrier Shim Kit For Dana 60, 70, 70HD, 70U & 80

from

$13.99
Product Features:
  • Carrier shim kit for Dana Spicer 60, 70, 70HD, 70U and 80
See More

Motive Gear – Differential Carrier Bearing Kit – Koyo (Part No.R10.5CK)

Differential Carrier Bearing Kit - Koyo

from

$112.99
Product Features:
  • CARRIER BEARING KIT FORD 10.5″
See More

Yukon Gear – Dana 80 Tracloc Clutch Set Round Design (Part No.16157)

Dana 80 Tracloc Clutch Set Round Design

from

$502.99
Dana 80 TracLoc clutch set round design (remove 4 plates 4 V-Type).

Product Features:
  • Clutch kit
  • Fit Dana Spicer 80 Trac Loc positraction
See More

Yukon Gear – Finned Aluminum Cover For Dana 80 (Part No.32337)

Finned Aluminum Cover For Dana 80

from

$239.99
Product Features:
  • Fits Dana Spicer 80
  • Finned aluminum
See More

USA Standard Gear – Master Overhaul Kit for the Dana 80 Differential (4.125" OD only). (Part No.37025)

Master Overhaul Kit for the Dana 80 Differential (4.125" OD only).

from

$446.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits Dana Spicer 80 with 4.125″ O.D. pinion bearing
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
See More

USA Standard Gear – Replacement Spider Gear Set For Dana 80, 37 Spline (Part No.39012)

Replacement Spider Gear Set For Dana 80, 37 Spline

from

$318.99
Product Features:
  • Spider gear kit
  • Fits Dana Spicer 80, 37 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
See More

Yukon Gear – Dana 70 & Dana 80 Standard Open Cross Pin Shaft (Part No.33324)

Dana 70 & Dana 80 Standard Open Cross Pin Shaft

from

$69.99
Dana 70 & Dana 80 standard Open cross pin shaft, one piece case.

Product Features:
  • Cross pin shaft
  • Fits Dana Spicer 70 and 80
See More

Yukon Gear – Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down (Part No.20049)

Replacement Standard Open Carrier Case For Dana 80, 3.73 & Down

from

$529.99
Yukon replacement standard open carrier case for Dana 80, 3.73 & down, (incl ABS) 35 & 37 spline.

Product Features:
  • Standard open carrier case
  • Fits Dana Spicer 80
  • 3.73 and down ratio only
  • Does not include spider gears
See More

Yukon Gear – Bearing Race Driver Set, 21 Piece (Part No.56030)

Bearing Race Driver Set, 21 Piece

from

$1566.99
21 Piece bearing race driver set. (Box wt: 140lbs) No return.

Product Features:
  • Bearing race driver set
  • 21 pieces
  • All steel construction
See More

Yukon Gear – Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng (Part No.33327)

Dana 50 Dana 60 Dana 70 & Dana 80 Roll Pin, 0.225" Dia, For X/P Shaft, 1.87" Lng

from

$7.99
Dana 50 Dana 60 Dana 70 & Dana 80 roll PIN, 0.225″ DIA, for X/P shaft, 1.87″ LNG.

Product Features:
  • Roll pin for Dana Spicer 50, 60, 70, 70U, 70HD and 80
  • 0.225″ diameter
  • 1.870″ long
See More

Yukon Gear – Dana 70 & Dana 80 Pinion Gear Thrust Washer (Part No.33288)

Dana 70 & Dana 80 Pinion Gear Thrust Washer

from

$7.99
Dana 70 & Dana 80 pinion gear Thrust washer.

Product Features:
  • Pinion gear thrust washer for Dana Spicer 70 and 80
See More

Yukon Gear – S135 Ring Gear Bolt & Nut Kit (Set Of 16 Bolts) (Part No.33041)

S135 Ring Gear Bolt & Nut Kit (Set Of 16 Bolts)

from

$138.99
S135 ring gear bolt & nut kit (set of 16 bolts).

Product Features:
  • Ring gear bolt and nut kit
  • Fits Dana Spicer S135
  • Includes 12 bolts and nuts
See More

Yukon Gear – Differential (Part No.26046)

Differential

from

$994.99
Differential

Motive Gear – Differential Gear Install Kit (Part No.D80IK)

Differential Gear Install Kit

from

$143.99


Product Features:
  • MINI INSTALL KIT DANA 80
See More

Motive Gear – Differential Carrier Gear Kit (Part No.707280XR)

Differential Carrier Gear Kit

from

$172.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
See More

Yukon Gear – Replacement Pinion Nut For Dana 80 (Part No.33145)

Replacement Pinion Nut For Dana 80

from

$26.99
Replacement pinion nut for Dana 80, 1 7/8″ socket.

Product Features:
  • Pinion nut for Dana Spicer 80
  • 1 7/8″ socket
See More

Yukon Gear – Replacement Outer Oil Baffle For Dana 80 (Part No.33004)

Replacement Outer Oil Baffle For Dana 80

from

$19.99
Product Features:
  • Oil baffle
  • Fits Dana Spicer 80
See More

FAG US – CONE (Part No.KLM603049)

CONE

from

$23.79
CONE

2003 Chevrolet C4500 Kodiak Differentials

Maybe you’re in the middle of a full rebuild of that 2003 Chevrolet C4500 Kodiak. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 92 different Differentials in our inventory ranging from $4.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 2003 Chevrolet C4500 Kodiak running smoothly.

Differentials are only as good as their brand. We stock 8 different brands to make sure you have plenty of trusted parts to choose from for your 2003 Chevrolet C4500 Kodiak. Valvoline, Yukon Gear, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 2003 Chevrolet C4500 Kodiak, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Differentials to keep your 2003 Chevrolet C4500 Kodiak rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 2003 Chevrolet C4500 Kodiak Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2003 Chevrolet C4500 Kodiak demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your C4500 Kodiak the best it can be. Be sure to browse some of our top Differentials brands and parts.

FAQs for 2003 Chevrolet C4500 Kodiak Differentials

What are the most purchased Differentials for the 2003 Chevrolet C4500 Kodiak?

Out of 92 Differentials for the 2003 Chevrolet C4500 Kodiak, the most popular in our inventory are:
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil
Bearings
from $8.99
This product is not rated
Bearings
Differential Bearings
Dana 60, Dana 70 & Dana 80 Cover Bolt
from $5.99
This product is not rated
Dana 60, Dana 70 & Dana 80 Cover Bolt
Differential Cover Bolts