2002 Volkswagen Beetle Exhaust Parts
Find Your Specific 2002 Volkswagen Beetle Exhaust Parts
Below you will find various in-demand Volkswagen Exhaust Parts, components and accessories for your 2002 Beetle. Advance Auto Parts has popular Beetle parts like Catalytic Converters, Exhaust Fittings, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Beetle model years including
2010,
2012,
2013,
2014,
2015,
2016,
2017,
2018,
2019 and more. Select a category of 2002 Volkswagen Beetle Exhaust Parts below and start saving instantly.
Popular 2002 Volkswagen Beetle Exhaust Parts Categories
Essential Exhaust Parts for 2002 Volkswagen Beetles
Walker – Exhaust Pipe Flange Gasket (Part No.31603)
from
$20.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
MagnaFlow – Touring Series Cat-Back Performance Exhaust System (Part No.15745)
from
$817.99
The MagnaFlow Touring Series Cat-Back Performance Exhaust System 15745 15745 is the perfect partner for your 1.8L, 2.8L 1999-2005 Volkswagen to take on a grand tour or a weekend cruise thanks to the powerful, resonant exhaust note and dyno-proven performance it brings to the table. This durable, corrosion resistant stainless steel exhaust kit is engineered to conquer the miles with ease while enhancing your driving experience with Moderate exterior and Mild interior sound levels generated through its fast-flowing, mandrel bent 2.25in. main piping and 2 Straight-Through muffler that terminate in a Dual Straight Driver Side Rear exit with 3in. Polished Welded-On Double Wall Straight Cut Rolled Edge tips. 15745 features a cat-back layout design to replace your import’s stock exhaust components from the catalytic converter on back. This Volkswagen exhaust system is compatible with 1999-2005 engines. The use of extensive 3D scans made during the development process has resulted in an easy-to-install, direct-fit design that fits your Volkswagen like a glove. 15745 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited lifetime construction warranty.
Product Features:
See More
Product Features:
- Mandrel bent tubing
- 409 Stainless Steel Construction
- Increased Horsepower and Torque
BRExhaust – Exhaust Bolt (Part No.258-820)
from
$4.79
If the time has come to replace, install, or fix some components of the exhaust system, BRExhaust will have you covered with all necessary accessories, from bolts to hangers, that will help you complete the exhaust job quickly and easily. Getting mounting parts and other accessories and hardware from the manufacturer that designs exhaust systems for the leading North American carmakers will guarantee factory-like quality and perfect fit. Each and every accessory by BRExhaust is made of quality materials to ensure safe and secure exhaust system performance and long service life.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Proper fit and functionality to finish your install
Walker – Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.53431)
from
$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
BRExhaust – Exhaust Connection Clamp (Part No.265-459)
from
$17.99
BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!
Product Features:
See More
Product Features:
- Stainless steel construction
- Exhaust accessory that enables a complete installation process.
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-497)
from
$198.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
- Optimal noise reduction
- Low backpressure and corrosion protection
- Constructed using 16-gauge aluminized steel
- Aluminized steel construction for maximum durability
- Constructed to help reduce flex and withstand vehicle vibration
BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-111)
from
$165.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
- Optimal noise reduction
- Low backpressure and corrosion protection
- Constructed using 16-gauge aluminized steel
- Aluminized steel construction for maximum durability
- Constructed to help reduce flex and withstand vehicle vibration
HJS – Exhaust Clamp Kit (Part No.H802563455HJS)
from
$12.52
Exhaust Clamp Kit
HJS – Exhaust Hanger (Part No.H8050324513HJS)
from
$11.60
Exhaust Hanger
Walker – Exhaust Resonator and Pipe Assembly (Part No.53959)
from
$147.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.125" Inlet (ID) 2.18" Inlet (OD) (Part No.53376)
from
$199.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54761)
from
$1481.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability for highly sensitive OBII applications, Walker Ultra EX Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions for highly sensitive OBII applications
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51637)
from
$638.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51637. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2010-2014 Volkswagen Jetta, 2013-2014 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE part 1K0 254 401 R. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
HJS – Exh. Man. to Pipe Ga (Part No.H4003121297HJS)
from
$5.14
Exh. Man. to Pipe Ga
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-40926-00)
from
$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
BRExhaust – Exhaust Washer (Part No.258-117)
from
$5.99
BRExhaust offers exhaust flange washers for use with their premium exhaust components. BRExhaust washers deliver the strength of steel, a proper fit and an easier install or repair. They’re available for fitment on a variety of year/make/model applications.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Easy installation
HJS – Exhaust Gasket (Part No.H400033757HJS)
from
$7.90
Exhaust Gasket
Febi – Exhaust Hanger (Part No.H8050174446FEB)
from
$23.24
Exhaust Hanger
Rein – Exhaust Hanger (Part No.EXH0032)
from
$14.99
Rein exhaust hangers are direct-fit OE replacements designed and manufactured to exact standards. Hangers come complete to ensure proper fit and function.
Product Features:
See More
Product Features:
- Produced with high quality materials to ensure maximum life and a smooth ride.
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Replace damaged or noisy exhaust hangers with Rein premium components to restore your vehicle to safe and optimal performance levels.
- Replace worn-out exhaust hangers to prevent damage to costly catalytic converters and other exhaust components.
BRExhaust – Exhaust Hanger (Part No.255-084)
from
$13.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
BRExhaust – Original Equipment Style Direct-Fit Muffler Assembly (Part No.279-107)
from
$349.99
This BRExhaust muffler assembly is engineered to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature a OE-style direct fit for your import or domestic¿while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- Easy installation and perfect fitment
- Thicker hangers for added strength
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes provide even distribution of exhaust flow through box interior
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55672)
from
$265.99
Designed to deliver superior flow and OE-style sound, Walker Quiet-Flow mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-28451-00)
from
$21.79
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97034)
from
$9.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Contains all gaskets and seals to remove and replace exhaust manifold
- Contains all gaskets and seals to remove and replace exhaust manifold
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-31958-00)
from
$11.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Exhaust Manifold Gasket Set (Part No.71-27898-20)
from
$9.29
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Elring – Exhaust Manifold Gasket (Part No.A8111315812ELR)
from
$9.30
Exhaust Manifold Gasket
Victor Reinz – Exhaust Manifold Gasket (Part No.71-31957-00)
from
$8.29
Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
- Able to withstand temperatures of up to 1400 degrees F.
- Durable against wear and tear between manifolds and cylinder heads.
- Ensures an effective seal as manifold flanges warp in extreme conditions.
Upgrade your 2002 Volkswagen Beetle with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2002 Volkswagen Beetle, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volkswagen or enhancing its overall performance, Exhaust Parts are key to keeping your Beetle functioning at its best. At Advance Auto Parts, we offer a wide selection of 66 Exhaust Parts for the 2002 Volkswagen Beetle, designed to meet your needs without breaking the bank.
From
Catalytic Converter
replacements to
Exhaust Fittings
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2002 Volkswagen Beetle at great prices.
Our Exhaust Parts inventory for this model
ranges from just $1.99 to $1,481.99, with
an average price of $192.25.
Our 66 Exhaust Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2002 Volkswagen Beetle without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Volkswagen Beetle, we stock popular OEM and aftermarket Exhaust Parts from top names
like FELPRO, Walker, MAGNAFLOW, and more.
FELPRO Exhaust Parts
start at just $6.99 and boast an impressive 5 stars average rating from customers.
Walker and MAGNAFLOW also bring quality to the table, with Exhaust Parts available starting at $1.99, and at an average 4 stars rating.
With 143 customer reviews and counting, our 2002 Volkswagen Beetle Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2002 Volkswagen Beetle is always ready to roll. We’re committed to providing you with everything you need to keep your Beetle in top shape, all in one place.
Start shopping confidently below for your 2002 Volkswagen Beetle!
Best-Selling Catalytic Converters for 2002 Volkswagen Beetles
Enhance the driving experience in your Volkswagen with 19 quality Catalytic Converter components, starting at $8.49.
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23710)
from
$588.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23710. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Jetta, 2001-2005 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 508 G and 1J0 254 509 AX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Ultra EPA Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93252)
from
$179.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
Walker – Ultra EPA Direct Fit Catalytic Converter 2.125" Outlet (OD) (Part No.54582)
from
$729.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.23773)
from
$694.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23773. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2000-2005 Volkswagen Jetta, 1999-2004 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 506 SX and 1J0 254 509 X, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Exhaust Pipe Flange Gasket (Part No.31597)
from
$8.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Ultra EPA Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.93267)
from
$202.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability with assured compliance, Walker Ultra Universal Catalytic Converters are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99205HM)
from
$178.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99205HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – HM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.99204HM)
from
$179.99
MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51205)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51205 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54761)
from
$1481.99
Designed to comply with EPA emissions requirements while delivering premium performance and durability for highly sensitive OBII applications, Walker Ultra EX Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions for highly sensitive OBII applications
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – OEM Grade Federal / EPA Compliant Universal Catalytic Converter (Part No.51204)
from
$194.99
MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat CARB Direct Fit Catalytic Converter 2.125" Outlet (OD) (Part No.82995)
from
$1094.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
Walker – CalCat Catalytic Converter- CARB Certified, Universal / Fabrication Needed (Part No.82907)
from
$895.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.456055)
from
$853.99
Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 456055. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat CARB Universal Catalytic Converter 2.5" Inlet (ID) 2.5" Outlet (ID) (Part No.82641)
from
$749.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – Standard Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.16426)
from
$740.99
Keep the check engine light off with MagnaFlow Direct-Fit Catalytic Converter 16426. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 2000-2005 Volkswagen Jetta, 1999-2004 Volkswagen Beetle, and additional vehicles. Avoid potential exhaust leaks by using the included gaskets to get a proper seal.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – Catalytic Converter- EPA Ultra, Direct Replacement, No Fabrication Needed (Part No.54473)
from
$731.99
Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker Ultra Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal inME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.51526)
from
$617.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51526. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Volkswagen Jetta, 2001-2005 Volkswagen Beetle, and more, this direct-fit catalytic converter also interchanges with OE parts 1J0 254 508 G and 1J0 254 509 AX, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.52426)
from
$559.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 52426. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed to fit the 1999-2005 Volkswagen Jetta, 1998-2006 Volkswagen Beetle, and additional vehicles. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Most Popular 2002 Volkswagen Beetle Exhaust Fittings
Customize your Volkswagen with 5 Exhaust Fittings products
like Exhaust Clamps, all
priced under $39.49.
Walker – Exhaust Clamp (Part No.36535)
from
$39.49
Complete your exhaust repair with the Torca coupler band clamp. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- SUPERIOR SEAL — Provides superior 360░ clamping and sealing on muffler inlets, outlets, elbow joints and pipe
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for your vehicle repair needs
- PREMIUM MATERIALS?–?Made from a variety of materials, including low-carbon steel or stainless steel for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing mufflers and exhaust systems for a complete exhaust system upgrade
HJS – Exhaust Hanger (Part No.H8050125267HJS)
from
$16.86
Exhaust Hanger
HJS – Exhaust Hanger (Part No.H8050324513HJS)
from
$11.60
Exhaust Hanger
Walker – Exhaust Clamp (Part No.35336)
from
$2.49
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35335)
from
$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS?–?Made from quality material for durability and long life
- BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top Picks for 2002 Volkswagen Beetle Exhaust Hangers
Upgrade Volkswagen Beetles with top-quality Exhaust Hangers parts, including 4 OEM and aftermarket selections for your 2002 model.
BRExhaust – Exhaust Bracket (Part No.255-054)
from
$13.79
BRExhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re conveniently available for a variety of car, truck, and van applications. BRExhaust exhaust insulator mounts are manufactured from premium rubber and steel to help keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
BRExhaust – Exhaust Hanger (Part No.255-084)
from
$13.99
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
BRExhaust – Exhaust Hanger (Part No.255-102)
from
$10.29
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.
Product Features:
See More
Product Features:
- Exhaust accessory that enables a complete installation process
- Precise fitment
- Precise fitment
- Manufactured according to strict OE standards
- Reduced Vibration
Febi – Exhaust Hanger (Part No.H8050174446FEB)
from
$23.24
Exhaust Hanger
In-Demand Exhaust Mufflers for 2002 Volkswagen Beetles
Select from 6 premium Exhaust Mufflers parts for your 2002 Volkswagen Beetle, with prices ranging from $5.50 to $349.99.
BRExhaust – Original Equipment Style Direct-Fit Muffler Assembly (Part No.279-107)
from
$349.99
This BRExhaust muffler assembly is engineered to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature a OE-style direct fit for your import or domestic¿while the interior design of the muffler box ensures quiet performance.
Product Features:
See More
Product Features:
- Aluminized steel construction for maximum durability
- Constructed to reduce flex and withstand vehicle vibration
- Easy installation and perfect fitment
- Thicker hangers for added strength
- External drain hole extends muffler life by allowing moisture to escape
- Uniform flow holes provide even distribution of exhaust flow through box interior
Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.55672)
from
$265.99
Designed to deliver superior flow and OE-style sound, Walker Quiet-Flow mufflers are available for top-selling domestic and foreign vehicles.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- RESISTS CORROSION — Internal drainage system helps reduce moisture collection
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
HJS – Exhaust Mounting Kit (Part No.H80003200538HJS)
from
$86.46
Exhaust Mounting Kit
Felpro – Exhaust Pipe Gasket (Part No.H4006977236FEL)
from
$10.28
Exhaust Pipe Gasket
BRExhaust – Exhaust Washer (Part No.258-117)
from
$5.99
BRExhaust offers exhaust flange washers for use with their premium exhaust components. BRExhaust washers deliver the strength of steel, a proper fit and an easier install or repair. They’re available for fitment on a variety of year/make/model applications.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Easy installation
Elring – Exh. Man. to Pipe Ga (Part No.H4003121300ELR)
from
$5.50
Exh. Man. to Pipe Ga
Most Sold 2002 Volkswagen Beetle Exhaust Pipes
Explore our best-selling Volkswagen parts for the 2002 Beetle among 16 OEM and aftermarket options starting from $5.14.
BRExhaust – Exhaust Connection Clamp (Part No.265-459)
from
$17.99
BRExhaust exhaust clamps are a great choice to install on your new BRExhaust exhaust. These clamps will provide the proper fit and function to finish your install. Each clamp is offered in a variety of shapes and sizes to deliver perfect, gas-tight performance for your project. A BRExhaust exhaust plus new exhaust clamps equals longer service life!
Product Features:
See More
Product Features:
- Stainless steel construction
- Exhaust accessory that enables a complete installation process.
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
Walker – Exhaust Pipe Flange Gasket (Part No.31649)
from
$17.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-111)
from
$165.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
- Optimal noise reduction
- Low backpressure and corrosion protection
- Constructed using 16-gauge aluminized steel
- Aluminized steel construction for maximum durability
- Constructed to help reduce flex and withstand vehicle vibration
Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2.125" Inlet (ID) 2.18" Inlet (OD) (Part No.53376)
from
$199.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.
Product Features:
See More
Product Features:
- CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
- BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
Felpro – Exhaust Pipe Flange Gasket (Part No.61197)
from
$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Walker – Exhaust Resonator and Pipe Assembly (Part No.53959)
from
$147.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
- RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
- FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
- STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
- GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
Walker – Exhaust Pipe 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.53431)
from
$49.49
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.
Product Features:
See More
Product Features:
- RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
- EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
Felpro – Exhaust Pipe Flange Gasket (Part No.61705)
from
$6.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
HJS – Exh. Man. to Pipe Ga (Part No.H4003121297HJS)
from
$5.14
Exh. Man. to Pipe Ga
BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.105-497)
from
$198.99
BRExhaust direct-fit exhaust resonators are designed to install easily and help you retain the OE exhaust sound you are looking for. The resonator is engineered to optimally reduce unwanted noises and backpressure while protecting against corrosion. Aluminized steel construction ensures maximum durability.
Product Features:
See More
Product Features:
- Direct-fit configuration
- Saves installation time by eliminating the need for the labor intensive bending and welding required with split system exhaust components
- Optimal noise reduction
- Low backpressure and corrosion protection
- Constructed using 16-gauge aluminized steel
- Aluminized steel construction for maximum durability
- Constructed to help reduce flex and withstand vehicle vibration
BRExhaust – Exhaust Flange Gasket (Part No.256-909)
from
$19.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
BRExhaust – Exhaust Flange Gasket (Part No.256-1102)
from
$19.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
Product Features:
See More
Product Features:
- Designed to facilitate hassle-free exhaust repair
- Precise fitment
- Manufactured from quality materials to ensure maximum durability
- Designed for a leak free connection
- OE structure and design
- Built to OEM specifications
- Secure gas-tight connection
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-27331-30)
from
$15.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-28461-00)
from
$11.79
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Victor Reinz – Exhaust Pipe Flange Gasket (Part No.71-40926-00)
from
$9.49
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
BRExhaust – Exhaust Flange Gasket (Part No.256-159)
from
$9.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.
See More
Top-Rated Exhaust Parts Brands For Your 2002 Volkswagen Beetle
Shop for the best-rated brands offering Exhaust Parts and other products for your 2002 Volkswagen Beetles. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and MAGNAFLOW, and more. Exhaust Parts from these brands that fit a 2002 Beetle start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular FELPRO 2002 Volkswagen Beetle Exhaust Parts
When it comes to maintaining or upgrading your 2002 Volkswagen Beetle, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2002 Volkswagen Beetle. With over 5 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $9.11. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Walker 2002 Volkswagen Beetle Exhaust Parts
Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2002 Volkswagen Beetle owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2002 Beetle, Advance Auto Parts carries a full inventory of 17 Walker Exhaust Parts. Plus you will be keeping your Volkswagen in peak condition while saving money because prices on these Walker Exhaust Parts range from $1.99 to $1,481.99, plus, with more than 37 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
from
$265.99
$265.99
This product is not rated
Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed
“”
FAQs for 2002 Volkswagen Beetle Exhaust Parts
Which Exhaust Parts are best-sellers for 2002 Volkswagen Beetles?
Out of 66 Exhaust Parts that fit 2002 Volkswagen Beetles, the following parts are the top sellers:
- Exhaust Clamp (10954416) – $39.49
- HM Grade Federal / EPA Compliant Universal Catalytic Converter (22315828) – $179.99
- Ultra EPA Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (20200246) – $202.99
What’s the price range for 2002 Volkswagen Beetle Exhaust Parts?
Exhaust Part prices for the 2002 Volkswagen Beetle start at $1.99 and go up to $1,481.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2002 Volkswagen Beetle?
The average price for Exhaust Parts for the 2002 Volkswagen Beetle is $192.25. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Volkswagen Beetle model years?
What are the cheapest Exhaust Parts for my 2002 Volkswagen Beetle?
The cheapest 2002 Volkswagen Beetle Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012223) – $1.99
- Exhaust Clamp (11012137) – $2.49
- Exhaust Manifold Gasket (11026398) – $2.65
- Exhaust Manifold Gas (11197162) – $3.84
- Exhaust Bolt (10050828) – $4.79
What are the top-rated Exhaust Parts that fit the 2002 Volkswagen Beetle?
Out of 143 reviews by customers, our 2002 Volkswagen Beetle Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2002 Volkswagen Beetle and their top-rated products:
- Exhaust Gaskets
- Exhaust Manifold Gasket Set (15780832) – $11.49
What types of Exhaust Parts do you sell for my 2002 Volkswagen Beetle?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2002 Volkswagen Beetle:
Can I get help with 2002 Volkswagen Beetle Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volkswagen Exhaust Parts and more.
What is your return policy for Volkswagen Beetle Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Volkswagen Beetle Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
