from

$839.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Limited Warranty.
Will not void vehicle warranty.

from

$211.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$419.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$367.99

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque
Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
Engineered to provide high airflow and exceptional filtration
Replaces factory air filter and intake tube
Filter only requires cleaning every 100,000 miles under normal highway driving conditions
Typical installation can be completed in 60 minutes or less with simple hand tools
No-Hassle Lifetime Limited Warranty
Will not void vehicle warranty(limited)

from

$409.99

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

+19 HP & +27 Lbs. x Ft. TQ
Outflows Factory Intake by 50%
Measured Flow: 253 CFM @ 1.5″ H2O
Heat-Resistant Sealed Housing w/ Black Powder-Coated Cover

from

$214.99

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
IMPROVED ENGINE SOUND: Hear the power under the hood
WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
Will not void vehicle warranty(limited)
Product might not be available in all states due to local laws.

from

$419.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$646.99

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. These 8″ tall 360-degree radial flow air filters feature a 3″ flange and our pre-oiled black Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. They provide your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while its expanded metal provides impact protection. These one-piece sealed housings, constructed of heat-resistant orange XLPE (cross-linked polyethylene) polymer, feature our patent-pending filter-to-housing interface. Their innovative design minimizes the total number of parts, making for an easy installation. Two clear sight windows allow for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Their XLPE material is heat soak resistant and extremely durable. High quality premium clamps and silicone bellow couplings are used for durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

from

$472.99

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

Guaranteed to increase horsepower and torque.
Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
Engineered to provide high airflow and exceptional filtration.
Replaces factory air filter and intake tube.
Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
Typical installation can be completed in 60 minutes or less with simple hand tools.
No-Hassle Lifetime Limited Warranty.
Will not void vehicle warranty(limited)

from

$425.99

This K&N NextGen cold air intake system is engineered for Toyota Tundra V8 5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 60.4% to your engine and provides an increase of 14.2 horsepower and 35.3 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Dyno-Proven Performance: Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
NextGen Airbox: The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
Oversized Air Filter: An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
Large-Diameter Tube: The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
Precision Engineering: Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
Simplified Installation: The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
50+ Years of Trusted Protection: Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
Warranty: K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

Product Features:

Designed to allow high flow rates and a consistent flow of oil to your engine
Pleated synthetic-blend filtration media removes most harmful contaminants
Fast and easy Wrench-Off removal using the welded one-inch hex nut
High capacity to withstand the service intervals recommended by vehicle manufacturers
Heavy-duty canister for outstanding durability
Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
Designed to operate with all synthetic, conventional, and blended motor oils
1-Year Limited Warranty

2002 Toyota Sequoia Performance and Racing Products

K&N – Cold Air Intake: Adds Up To 18 Horsepower, With Washable Air Filter (Part No.77-9042KP)

Spectre – Spectre Air Intake Kit (Part No.9961)

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.63-9032-1)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.63-9027)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.77-9020KP)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.57-9020)

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 19 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-81174)

Spectre – Cold Air Intake Kit Engineered to Add Horsepower & Torque (Part No.9964)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.77-9035KP)

aFe POWER – Momentum GT Cold Air Intake System Orange with Black Pro 5R Filter (Part No.50-70100KN)

K&N – Cold Air Intake: Adds Up To 7 Horsepower, With Washable Air Filter (Part No.77-9036KP)

K&N – NextGen Cold Air Intake: Adds Up To 14.2 Horsepower, With Washable Air Filter (Part No.50-9036)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1002)

K&N – Cold Air Intake: Adds Up To 14 Horsepower, With Washable Air Filter (Part No.57-9020)

Spectre – Spectre Air Intake Kit (Part No.9961)

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.77-9020KP)

K&N – Premium Oil Filter: Ideal for Synthetic, Conventional & Blended Oil, Protects Your Engine (Part No.HP-1002)