2002 Toyota Sequoia Catalytic Converters

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 99204HM. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Durable 308 stainless steel MIG welds
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49577. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 49577 includes (1) Torca Clamp, (1) Flange Gasket, (2) Flat Ring Gaskets and interchanges with OE parts 17450-0F030. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• Simplifies installation with essential gaskets and hardware being included in the box
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49578. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 49578 includes (2) Flat Ring Gaskets, (1) Flange Gasket and interchanges with OE parts 17410-0F020. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51204. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4551060. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2001-2004 Toyota Sequoia and interchanges with OE part 17450-0F030. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Simplifies installation with essential gaskets and hardware being included in the box
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Direct-Fit Catalytic Converter 4551061. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 4551061 includes (2) Flat Ring Gaskets, (1) Flange Gasket and interchanges with OE parts 17410-0F020. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 455005. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 455004. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93377. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 93377 includes (2) Flat Ring Gaskets, (1) Flange Gasket and interchanges with OE parts 17410-0F020. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93376. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This Direct-Fit Catalytic Converter is designed to fit the 2001-2004 Toyota Sequoia 4.7L. MagnaFlow 93376 includes (1) Torca Clamp, (2) Flat Ring Gaskets, (1) Flange Gasket and interchanges with OE parts 17450-0F030. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Durable 308 stainless steel MIG welds
• Durable 308 stainless steel MIG welds
• Simplifies installation with essential gaskets and hardware being included in the box
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• OE-sized barbed exhaust hangers made from corrosion-resistant 410 stainless steel, designed to reduce noise and vibration
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty