2002 Suzuki Aerio Cooling and Climate Controls

Essential 2002 Suzuki Aerio Cooling and Climate Controls

NTC – Thermostat (Part No.G4000251727NTC)

Thermostat

from

$33.19
NTC offers a full line of thermostats to replace your original equipment thermostat. This includes a wide variety of temperature ranges all designed to operate within OEM specifications.

Product Features:
  • Strict quality control, and functional testing
  • Self-cleaning and self-aligning thermostat valve
  • Original equipment design provides exact fit and performance
  • Precise sealing edges reduce leakage and premature cooling
  • Temperature sensitive heat motor provides consistent valve response for smooth performance and precise engine cooling
  • Stainless steel assembly and springs are engineered for long life
See More

Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)

Engine Cooling Fan Module

from

$94.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.

Product Features:
  • Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Permatex – The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ (Part No.34310)

The Right Stuff: Grey, 1 Minute Gasket Maker, 10 OZ

from

$38.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:
  • Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
  • Sensor-safe, non-corrosive, RTV silicone
  • Protects against leaks caused by vibration and thermal expansion
  • Meets performance specs of OE silicone gaskets
  • Quickly returns vehicle to service in just 1 minute
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Standard – A/C Remanufactured; w/ Clutch; w/ 10S13C Compressor (Part No.DW97340)

A/C Remanufactured; w/ Clutch; w/ 10S13C Compressor

from

$293.99
Carquest Standard Remanufactured Compressors are manufactured to meet original equipment specifications. All components are either remanufactured to strict standards or are replaced with new components to ensure performance and durability. All compressors are 100% end of line tested.

Product Features:
  • O-Rings and gaskets necessary for installation are included.
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Premium – Connector (Part No.PTA1233)

Connector

from

$26.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12024)

Radiator Cap Tester Adapter

from

$16.49
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Factory Air – O-Ring & Gasket A/C System Seal Kit (Part No.26834)

O-Ring & Gasket A/C System Seal Kit

from

$12.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Compatible with R12 and R134A
  • All hardware included
  • High quality construction
  • Universal applications
See More

Felpro – Multi-Purpose O-Ring (Part No.35768)

Multi-Purpose O-Ring

from

$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
See More

Carquest Premium – A/C Evaporator (Part No.T44014)

A/C Evaporator

from

$154.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10242)

Radiator Cap: 16 PSI

from

$14.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Carquest Premium – A/C Condenser and Receiver Drier Assembly (Part No.714695)

A/C Condenser and Receiver Drier Assembly

from

$428.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

KAI – A/C Service Valve (Part No.FTT010751)

A/C Service Valve

from

$9.99
New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:
  • MT2909
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – Coolant Housing/Water Outlet (Part No.85217)

Coolant Housing/Water Outlet

from

$21.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Direct-fit replacement for ease of installation
  • 100% leak tested
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1045)

HVAC Blower Motor Resistor

from

$60.99
Blower motor resistor fail? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment.

Product Features:
  • Restores Functionality – Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.432639)

Radiator: With Transmission Oil Cooler

from

$185.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Carquest Premium – Coolant Temperature Sensor (Part No.WTC1317)

Coolant Temperature Sensor

from

$36.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – A/C Desiccant Bag Kit (Part No.T83150)

A/C Desiccant Bag Kit

from

$12.29
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
See More

KAI – A/C Expansion Valve (Part No.ACX011071)

A/C Expansion Valve

from

$27.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C New; w/ Clutch; w/ 10S13C Compressor (Part No.T98340)

A/C New; w/ Clutch; w/ 10S13C Compressor

from

$404.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

DENSO – Relay (Part No.P2020317532ND)

Relay

from

$40.58
Relay

Victor Reinz – Engine Coolant Thermostat Gasket (Part No.71-40884-00)

Engine Coolant Thermostat Gasket

from

$3.99
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
See More

Carquest Premium – Blower Motor: With Wheel (Part No.75736)

Blower Motor: With Wheel

from

$133.99
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Flex A Lite – Trimline Straight Blade Electric Fan (Part No.112)

Trimline Straight Blade Electric Fan

from

$112.99
Trimline Straight Blade Electric Fan

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle (Part No.902-2013)

Coolant Housing/Water Outlet: With Housing and Gasket, 45 Degree Neck Angle

from

$21.99
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Felpro – THERMOSTAT GASKET (Part No.35769)

THERMOSTAT GASKET

from

$4.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered and manufactured specifically for the repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

2002 Suzuki Aerio Cooling and Climate Controls

You count on your 2002 Suzuki Aerio to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 46 Cooling and Climate Controls ranging in price from $1.99 to $466.99, you’re sure to find everything you need for your 2002 Suzuki Aerio.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 17 different brands like Permatex, Carquest Premium, and Factory Air. 2002 Suzuki Aerio Cooling and Climate Controls start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 1,127 extensive product reviews on 2002 Suzuki Aerio Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Blower Motor: With Wheel with 4.5 stars and Standard Thermostat: With Seal, 180 Degrees with 4.3 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 2002 Suzuki Aerio below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 2002 Suzuki Aerio

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Suzuki Aerio running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.

Popular Driveworks Water Pumps Cooling and Climate Controls

You’ll find popular Driveworks Water Pumps brand products across Engine Cooling Parts. All are waiting to get your 2002 Suzuki Aerio back on the road. Some of the top-rated Driveworks Water Pumps products in these categories are:
Water Pump: New, Installation Gasket Included
from $59.99
(2)
Water Pump: New, Installation Gasket Included
Water Pumps

Top-Rated Permatex Cooling and Climate Controls


If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 2002 Suzuki Aerio, and some of our most reviewed Permatex parts include:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Sensor-Safe, High Torque RTV Silicone Gasket Maker
from $6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets

FAQs for 2002 Suzuki Aerio Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 2002 Suzuki Aerio?

Out of 46 Cooling and Climate Controls for the 2002 Suzuki Aerio, the most popular in our inventory are:
Radiator Cap: 16 PSI
from $14.99
(137)
Radiator Cap: 16 PSI
Radiator Caps
Cap & Valve A/C System Seal Kit
from $17.99
(29)
Cap & Valve A/C System Seal Kit
AC Caps and Valve Core Kits
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
from $19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets

What are the top-rated 2002 Suzuki Aerio Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 2002 Suzuki Aerio based on customer reviews/ratings are:
Blower Motor: With Wheel
from $133.99
(10)
Blower Motor: With Wheel
“The part arrived in working order, perfect fit. However, it was not the part needed to fix the broken car.😯”
Standard Thermostat: With Seal, 180 Degrees
from $20.79
(3)
Standard Thermostat: With Seal, 180 Degrees
“Charge my all want.”
Engine Water Pump: New, Gasket/Seals Included
from $99.99
(2)
Engine Water Pump: New, Gasket/Seals Included
“Good price. Only few weeks to give a review.”