2002 Lexus LS430 Suspension Parts
More 2002 Lexus LS430 Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 2002 Lexus LS430, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 2002 Lexus LS430 Suspension Parts
Carquest – Multi Purpose Relay (Part No.83A1002)
from
$15.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- High-quality products that meet OE appearance and performance to
Rare Parts – Strut Mounting Kit (Part No.RP53115)
from
$185.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Meets or exceeds OE requirements
- Helps restore vehicle ride.
- Reduces tire wear
MOOG – Strut Bellows (Part No.K90461)
from
$35.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
KYB – Jounce Bumper and Bellows (Part No.SB104)
from
$23.79
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Sachs – Strut Bump Stop (Part No.L3036238476SAC)
from
$26.57
SACHS Service Kits replace the Original Equipment boot kits and bump stops providing protection to the piston rod preventing damage and prohibiting rust.
Product Features:
See More
Product Features:
- SACHS Service Kits help to prolong the life and performance of the shock or strut.
- Always replace your Service kits in pairs.
- Are built with design and quality that matches or exceeds OE quality
Suncore – Conversion Kit (Part No.69T-31-F)
from
$329.99
Conversion Kit
Suncore – Conversion Kit (Part No.69T-31-R)
from
$319.99
Conversion Kit
Monroe – Strut-Mate Strut Mounting Kit (Part No.905935)
from
$45.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Strut-Mate Strut Mounting Kit (Part No.905934)
from
$74.99
Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
- EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Suncore – Quick Strut (Part No.55S15222)
from
$124.99
Quick Strut
Suncore – Quick Strut (Part No.55S15221)
from
$124.99
Quick Strut
Suncore – Quick Strut Kit (Part No.2-55S11690-001)
from
$309.99
Quick Strut Kit
Suncore – Quick Strut (Part No.55S11690)
from
$159.99
Quick Strut
Advanced Suspension Technology – Control Arm Bushing, Rearward position (Part No.L2030178489AST)
from
$119.16
The Advanced Suspension Technology Control Arm Bushing is offers a unique polyurethane alternative to conventional rubber suspension bushings. Their bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise.AST is a manufacturer of high quality polyurethane replacement bushings and components for automotive applications.Observe the following instructions if installing the updated AST bushing: Remove old bushing and press new bushing into housing (inner sleeve can be removed to ease installation, along with a light coating of silicone-based grease if so desired). Place the bevel-shaped triangular washer over the control arm spigot, followed by the bushing. Ensure that the cut-out on the AST bushing is centrally located against the triangular washer when in a neutral position, before deadlocking the nut.
Product Features:
See More
Product Features:
- Impregnated with graphite to aid in lubrication and reduce noise
- Alternative to conventional rubber suspension bushings
Dorman – Control Arm (Part No.L2000140264DOR)
from
$149.30
Rigorously tested for sustained, secure performance by a team of product and quality engineers, Dorman’s Control Arm and Ball Joint Assembly is designed for passenger safety. Dorman’s industry-leading evaluation process ensures a smooth ride, directional stability, and agile handling.
Product Features:
See More
Product Features:
- Ball joints and bushings (when applicable) included for a complete installation, saving time and labor (where applicable)
- Direct replacement for a trouble-free installation
- Steel, iron or aluminum construction ensures durability
- Powder-coated or painted for long-lasting rust and corrosion resistance
KYB – Gas Strut (Part No.341393)
from
$188.99
Product Features:
See More
- #1 recommended Original Equipment replacement choice for Asian cars
- Specifically calibrated to help restore the original handling and control characteristics of your Lexus LS
- Uses a seamless working cylinder matched with a Teflon coated piston band for a positive seal and longer life
- Triple chrome plated piston rod and multi-lip oil seals that reduce wear
- Features a precision, sintered iron strut rod guide to help retain correct wheel alignment
- Engineered to help vehicles with electronic safety systems (ESC, ABS, etc.)
Carquest Premium – Complete Strut Assembly: Includes Strut, Coil Spring and Mount (Part No.18-920017)
from
$141.99
Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.
Product Features:
See More
Product Features:
- Nuts and Bolt: SAE Standard Grade
- Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
- Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
- Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
- Outer Tube: Long-lasting corrosion and rust protection.
- Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
- Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
- Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
- Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
- Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.
Monroe – OESpectrum Strut (Part No.72342)
from
$196.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.
Product Features:
See More
Product Features:
- REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
- CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
- LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
- OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
- Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
KYB – Bellows Bump Stop Kit (Part No.L303734952KYB)
from
$27.19
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
Royal Purple – POWER STEERING FLUID (Part No.01326)
from
$6.29
POWER STEERING FLUID
International Suspension Group – Strut Mount (Part No.L3030420554ISG)
from
$70.91
Strut Mount
KYB – STRUT MOUNT (Part No.L3030402300KYB)
from
$74.26
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
KYB – KYB Shock Mount (Part No.L4010402291KYB)
from
$96.63
KYB Shock Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Shock Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB SHock Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
Popular 2002 Lexus LS430 Suspension Parts Categories
2002 Lexus LS430 Suspension Parts
You count on your 2002 Lexus LS430 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 39 Suspension Parts ranging in price from $6.29 to $329.99, you’re sure to find everything you need for your 2002 Lexus LS430.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 15 different brands like Carquest, Moog, and KYB. 2002 Lexus LS430 Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 26 extensive product reviews on 2002 Lexus LS430 Suspension Parts.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 2002 Lexus LS430 below to get started!
Top-Rated Suspension Parts Brands For Your 2002 Lexus LS430
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Lexus LS430 running right for years to come. In our inventory you’ll find brands like Carquest, Moog, KYB, and even more.
Popular Monroe Suspension Parts
You’ll find popular Monroe brand products across Shocks and Struts. All are waiting to get your 2002 Lexus LS430 back on the road. Some of the top-rated Monroe products in these categories are:
Top-Rated MOOG Suspension Parts
If MOOG are what you’re looking for, our inventory holds plenty. We stock MOOG brand Suspension Parts for your 2002 Lexus LS430, and some of our most reviewed MOOG parts include:
FAQs for 2002 Lexus LS430 Suspension Parts
What are the most purchased Suspension Parts for the 2002 Lexus LS430?
Out of 39 Suspension Parts for the 2002 Lexus LS430, the most popular in our inventory are:
