2002 Infiniti I35 Belts and Hoses
Find Your Specific 2002 Infiniti I35 Belts and Hoses
Below you will find various in-demand Infiniti Belts and Hoses, components and accessories for your 2002 I35. Advance Auto Parts has popular I35 parts like Fuel Hoses, Heater Hoses, Serpentine and V Belts and more. You’ll also find aftermarket and OEM Belts and Hoses for other I35 model years including
2003
2004 and more. Select a category of 2002 Infiniti I35 Belts and Hoses below and start saving instantly.
Popular 2002 Infiniti I35 Belts and Hoses Categories
Essential Belts and Hoses for 2002 Infiniti I35s
Dayco – Serpentine Idler/Tensioner Pulley; Steel, 84mm Dia., 25mm Width, Smooth (Part No.89134)
from
$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Bando – Multi Rib (Serpentine) Belt (Part No.W100057556BAN)
from
$22.95
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100026491MBL)
from
$12.94
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Dayco – Molded Radiator and Bypass Hose (Part No.G2000124163DAY)
from
$18.11
Designed to replace original equipment manufacturer hose, Dayco Molded Radiator and Bypass Hose are built with knitted reinforcement and EPDM construction which provides high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. The Dayco Molded Radiator and Bypass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro- chemical requirements as specified in SAE J1684.
Product Features:
See More
Product Features:
- Made with synthetic EPDM rubber compounds that provide resistance to deterioration from ozone, coolants, and temperature variations of -40F (-40C) to +257F (+125C)
- The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose
- Meets SAE J20R4, Class D-1 requirements for improved service hose
- Meets Type EC electro-chemical requirements as specified in SAE J1684; which eliminates premature deterioration of the inner tube caused by the build up of static electric charges
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.39" Long, 1.31" Diameter (Part No.D72143)
from
$22.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Dayco, Heater Hose, Trim-to-Fit (Part No.R30301220370DAY)
from
$15.19
Dayco, Heater Hose, Trim-to-Fit
Gates – Premium Molded Coolant Hose (Part No.22969)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Dayco – Serpentine Belt Kit; With 2 Belts and Pulley, 3 Piece Set (Part No.5060431K1)
from
$51.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Engineered to match OE specifications with unique features that enhance vehicle performance and safety
- For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
- Provides all the parts needed in one box, helping simplify installation
Dorman – Idler/Tensioner Pulley: Specific Fit, Steel, 84 mm Diameter (Part No.419-624)
from
$68.99
This replacement accessory drive belt idler pulley has been engineered to match the function and performance of the original pulley on select vehicle years, makes and models, properly restoring critical vehicle operations.
Product Features:
See More
Product Features:
- Direct replacement – this accessory drive belt idler pulley matches the fit and function of the original equipment pulley on specified vehicles.
- Restores performance – fixes a failed, squealing or groaning noise from a worn idler pulley
- Application specific – reverse engineered from the original design on certain vehicle years, makes and models
- Trustworthy quality – backed by team of engineers and quality specialists in the United States
Dayco – Poly Rib Belt Serpentine Belt; 43.11 Long, 6 Rib Count (Part No.5060431)
from
$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Gates – Micro-V« Serpentine Drive Belt (Part No.K040305)
from
$31.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Dayco – Poly Rib Belt Serpentine Belt; 30.51 Long, 4 Rib Count (Part No.5040305)
from
$33.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.45" Long, 1.31" Diameter (Part No.E72144)
from
$22.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dorman – Power Steering Belt Adjuster Bolt (Part No.926-085)
from
$17.99
This belt tensioner bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this belt tensioner bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Accessory Belt Tensi (Part No.G6000274247DOR)
from
$99.11
Accessory Belt Tensi
Autotecnica – Accessory Belt Tensi (Part No.G6000274247ANA)
from
$45.99
Accessory Belt Tensi
Original Equipment – Fuel Filler Hose (Part No.E2025779181OEA)
from
$64.87
Fuel Filler Hose
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 Inch Length (Part No.88402)
from
$49.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 24 Inch Length (Part No.88422)
from
$21.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Gates – Premium Molded Heater Hose (Part No.19899)
from
$16.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Upgrade your 2002 Infiniti I35 with Top-Quality Belts and Hoses
When it comes to maintaining or upgrading your 2002 Infiniti I35, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Infiniti or enhancing its overall performance, Belts and Hoses are key to keeping your I35 functioning at its best. At Advance Auto Parts, we offer a wide selection of 30 Belts and Hoses for the 2002 Infiniti I35, designed to meet your needs without breaking the bank.
From
Fuel Hose
replacements to
Heater Hoses
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Belts and Hoses for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Belts and Hoses for your 2002 Infiniti I35 at great prices.
Our Belts and Hoses inventory for this model
ranges from just $12.94 to $99.11, with
an average price of $34.45.
Our 30 Belts and Hoses in stock come from 11 trusted brands, so you’re sure to find the right part for your 2002 Infiniti I35 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Infiniti I35, we stock popular OEM and aftermarket Belts and Hoses from top names
like Dayco, Driveworks, Dorman, and more.
Dayco Belts and Hoses
start at just $15.19 and boast an impressive 5 stars average rating from customers.
Driveworks and Dorman also bring quality to the table, with Belts and Hoses available starting at $17.99, and at an average 4 stars rating.
With 100 customer reviews and counting, our 2002 Infiniti I35 Belts and Hoses have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Belts and Hose upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2002 Infiniti I35 is always ready to roll. We’re committed to providing you with everything you need to keep your I35 in top shape, all in one place.
Start shopping confidently below for your 2002 Infiniti I35!
Best-Selling Fuel Hoses for 2002 Infiniti I35s
Enhance the driving experience in your Infiniti with 1 quality Fuel Hose components, starting at $64.87.
Original Equipment – Fuel Filler Hose (Part No.E2025779181OEA)
from
$64.87
Fuel Filler Hose
Most Popular 2002 Infiniti I35 Heater Hoses
Customize your Infiniti with 4 Heater Hoses products
like Heater Hoses, all
priced under $49.49.
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 17 Inch Length (Part No.88402)
from
$49.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 24 Inch Length (Part No.88422)
from
$21.79
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.
Product Features:
See More
Product Features:
- Meets the requirements of SAE J20R3, Class D-1
- Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Engineered as an OEM replacement
- The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
Dayco – Dayco, Heater Hose (Part No.R30301221010DAY)
from
$23.03
Dayco, Heater Hose
Gates – Premium Molded Heater Hose (Part No.19899)
from
$16.29
Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
Product Features:
See More
Product Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Top Picks for 2002 Infiniti I35 Serpentine and V Belts
Upgrade Infiniti I35s with top-quality Serpentine and V Belts parts, including 15 OEM and aftermarket selections for your 2002 model.
Dayco – Poly Rib Belt Serpentine Belt; 30.51 Long, 4 Rib Count (Part No.5040305)
from
$33.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Driveworks – Poly Rib Belt Serpentine Belt; 43.11 Long, 6 Rib Count (Part No.431K6)
from
$33.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Poly Rib Belt Serpentine Belt; 43.11 Long, 6 Rib Count (Part No.5060431)
from
$37.99
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
- Engineered to help address noise issues caused by the belt drive
- Capable of handling more extreme temperatures and workloads
Driveworks – Poly Rib Belt Serpentine Belt; 30.51 Long, 4 Rib Count (Part No.305K4)
from
$34.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
Dayco – Serpentine Idler/Tensioner Pulley; Steel, 84mm Dia., 25mm Width, Smooth (Part No.89134)
from
$40.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.
Product Features:
See More
Product Features:
- Designed for the majority of automotive vehicle applications on the road today
- High-quality materials help resist wear and improve belt life
- Features premium lubricated bearings to extend service life
- Meets or exceeds OE quality
Dayco – Serpentine Belt Kit; With 2 Belts and Pulley, 3 Piece Set (Part No.5060431K1)
from
$51.99
Dayco believes in a systems approach to maintenance and has a full line of serpentine belt kits that have been designed for the most popular light-duty applications, ensuring that whomever is completing the repair has all the parts needed. Dayco’s kit offers everything to service your front-end accessory drive with OE or equivalent components. This can include a premium tensioner with flat spring technology, durable pulley(s) with permanently lubricated bearings, a Dayco ela (stretch) serpentine belt, and the Dayco serpentine belt that provides extensive flexibility and longer service life, while handling higher workloads and temperatures.
Product Features:
See More
Product Features:
- Engineered to match OE specifications with unique features that enhance vehicle performance and safety
- For vehicles that need a highly engineered drive belt and multiple parts for a thorough and proper repair
- Provides all the parts needed in one box, helping simplify installation
Gates – Micro-V« Serpentine Drive Belt (Part No.K040305)
from
$31.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000579317ACD)
from
$73.73
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
- Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
- Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
- Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
- Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
ContiTech – Drive Belt (Part No.W1000861559CON)
from
$27.84
ContiTech Serpentine Belts come in a wide range of sizes and are designed to be oil-resistant and temperature-stable from -22F to 176F (-30C to 80C). ContiTech Serpentine Belts deliver 98% power efficiency. While a lower profile design easily handles higher engine revs, reducing noise and providing cooler running temperatures. High performance construction features include polychloroprene rubber cover and body, polyester fiber tensile members, and a ribbed belt design. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Temperature-stable from -22F to 176F (30C to 80C).
- Delivers over 98% power efficiency.
- High performance construction.
- Polychloroprene rubber cover and body.
- Polyester fiber tensile members and a ribbed belt design.
Gates – Micro-V« Serpentine Drive Belt (Part No.K060431)
from
$25.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the rib surface
- Meets or exceeds all specifications from the Original Equipment Manufacturer
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100057556MBL)
from
$25.38
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
Bando – Multi Rib (Serpentine) Belt (Part No.W100057556BAN)
from
$22.95
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Carquest Standard – Serpentine Belt: 30.5" Long, 4 Rib Count (Part No.305K4)
from
$17.99
Carquest Standard serpentine belts are constructed from quality materials to ensure durability and a long lifespan. We design and manufacture each Carquest Standard belt to enhance belt-to-pulley contact, maximizing load-carrying capacity and extending belt life. Our serpentine belts are built with EPDM rubber and treated polyester cord to improve durability and belt life. Carquest Standard belts are the right choice when looking for OE fit, form, and function at a great price.
Product Features:
See More
Product Features:
- Constructed with heat and ozone resistant EPDM rubber
- Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
- Made with treated polyester cord to reduce belt stretch
- Meets OE fit, form, and function
Bando – Multi Rib (Serpentine) Belt (Part No.W100026491BAN)
from
$15.65
Bando USA has been a leading OE supplier to automotive manufacturers for over 50 years and Bando serpentine belts are original equipment on over 70% of the top 10 selling vehicles in North America. Bando USA will not compromise on critical quality measurements. Bando belts are produced to the same, more precise OE metric size to deliver an exact fit within the millimeter, ensuring a perfect fit every time. In addition to exact metric sizing, Bando USA aftermarket serpentine belts provide true OE performance for its aftermarket belts, as they are produced on the same manufacturing lines as the OE belts. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
- Strong tensile cords limit stretching.
- Supports higher horsepower loads.
- Made from high strength synthetic rubber.
Mitsubishi – Multi-Rib (Serpentine) Belt (Part No.W100026491MBL)
from
$12.94
The Mitsuboshi Multi Rib (Serpentine) Belt meets or exceeds the vehicle manufacturer’s specifications for durability, fit and quality. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Resistant against wear, oil and heat.
In-Demand Engine Cooling Hoses for 2002 Infiniti I35s
Select from 2 premium Engine Cooling Hoses parts for your 2002 Infiniti I35, with prices ranging from $22.79 to $34.99.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.45" Long, 1.31" Diameter (Part No.E72144)
from
$22.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Gates – Premium Molded Coolant Hose (Part No.22969)
from
$34.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Most Sold 2002 Infiniti I35 Belt Tensioners
Explore our best-selling Infiniti parts for the 2002 I35 among 3 OEM and aftermarket options starting from $17.99.
Dorman – Power Steering Belt Adjuster Bolt (Part No.926-085)
from
$17.99
This belt tensioner bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this belt tensioner bolt matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue.
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Accessory Belt Tensi (Part No.G6000274247DOR)
from
$99.11
Accessory Belt Tensi
Autotecnica – Accessory Belt Tensi (Part No.G6000274247ANA)
from
$45.99
Accessory Belt Tensi
Top-Rated Belts and Hoses Brands For Your 2002 Infiniti I35
Shop for the best-rated brands offering Belts and Hoses and other products for your 2002 Infiniti I35s. Below you’ll find some of our best rated Belts and Hoses from Dayco, Driveworks, and Dorman, and more. Belts and Hoses from these brands that fit a 2002 I35 start at just $15.19 and are rated as high as 5 stars. OEM and aftermarket Belts and Hoses don’t get more top quality, durable, and affordable than from the brands below.
Popular Dayco 2002 Infiniti I35 Belts and Hoses
When it comes to maintaining or upgrading your 2002 Infiniti I35, using quality Belts and Hoses is essential to ensure durability and a perfect fit. Dayco ticks all of those boxes. We offer a wide selection of Dayco Belts and Hoses, specifically designed for the 2002 Infiniti I35. With over 12 Dayco brand Belts and Hoses in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.19, with an average price of just $30.20. Plus, with over 61 customer reviews and an average rating of 5 stars, you can trust that our Dayco Belts and Hoses will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$21.79
$21.79
This product is not rated
Molded Heater Hose; EPDM Rubber, 3/4 Inch Diameter, 24 Inch Length
“”
Popular Driveworks 2002 Infiniti I35 Belts and Hoses
Driveworks auto parts is one of the highest quality Belts and Hose brands in the market. Any 2002 Infiniti I35 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 2002 I35, Advance Auto Parts carries a full inventory of 2 Driveworks Belts and Hoses. Plus you will be keeping your Infiniti in peak condition while saving money because prices on these Driveworks Belts and Hoses range from $33.49 to $34.99, plus, with more than 28 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Belts and Hoses below will deliver on both quality and value.
FAQs for 2002 Infiniti I35 Belts and Hoses
Which Belts and Hoses are best-sellers for 2002 Infiniti I35s?
Out of 30 Belts and Hoses that fit 2002 Infiniti I35s, the following parts are the top sellers:
- Idler/Tensioner Pulley: Specific Fit, Steel, 84 mm Diameter (10625826) – $68.99
- Power Steering Belt Adjuster Bolt (12007549) – $17.99
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.39" Long, 1.31" Diameter (15590198) – $22.49
What’s the price range for 2002 Infiniti I35 Belts and Hoses?
Belts and Hose prices for the 2002 Infiniti I35 start at $12.94 and go up to $99.11 for the most premium parts.
What’s the average price of a Belts and Hose for a 2002 Infiniti I35?
The average price for Belts and Hoses for the 2002 Infiniti I35 is $34.45. Keep in mind the variety of part types within our Belts and Hose category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Belts and Hoses for other Infiniti I35 model years?
What are the cheapest Belts and Hoses for my 2002 Infiniti I35?
The cheapest 2002 Infiniti I35 Belts and Hoses we carry in stock are:
- Multi-Rib (Serpentine) Belt (10811313) – $12.94
- Dayco, Heater Hose, Trim-to-Fit (12076000) – $15.19
- Multi Rib (Serpentine) Belt (10812247) – $15.65
- Premium Molded Heater Hose (10511161) – $16.29
- Power Steering Belt Adjuster Bolt (12007549) – $17.99
What are the top-rated Belts and Hoses that fit the 2002 Infiniti I35?
Out of 100 reviews by customers, our 2002 Infiniti I35 Belts and Hoses have an average customer rating of . These are some of the highest-rated Belts and Hose types for the 2002 Infiniti I35 and their top-rated products:
- Radiator Hoses
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.39" Long, 1.31" Diameter (15590198) – $22.49
- Serpentine and V Belts
- Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11.39" Long, 1.31" Diameter (15590198) – $22.49
What types of Belts and Hoses do you sell for my 2002 Infiniti I35?
As of 2/5/25, these are some of the most in-demand types of Belts and Hoses for a 2002 Infiniti I35:
Can I get help with 2002 Infiniti I35 Belts and Hose orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Infiniti Belts and Hoses and more.
What is your return policy for Infiniti I35 Belts and Hoses?
Advance Auto Parts keeps returns simple. For new Infiniti I35 Belts and Hoses and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
