from

$16.99

New Platinum Pro Power Steering Reservoir, With Cap

Product Features:

With Cap, Made Of Plastic
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$105.34

Although no plastic fluid reservoir is completely immune to the conditions that cause cracking, some are less susceptible than others. Dorman uses tough blow-molded plastic for Dorman’s Power Steering Reservoir, steeling it against coolant corrosion, fluid freezing, or exposure to extreme under hood heat.

Product Features:

Includes reservoir cap and level sensor (where applicable)
Direct replacement for a proper fit every time
Weather-resistant
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$93.99

Heavy Duty Pump Seal Kit

from

$68.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$252.99

CARDONE Remanufactured Rack & Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100% new, O.E.-style o-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.

Product Features:

Protective coating applied to each unit to extend the life of the unit (where applicable).
100% performance testing to ensure perfect fit, function and reliable performance.
100% hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
100% new O.E.- style o-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
Valve housings have polished micro-finish sleeves for durability (where applicable).
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$465.55

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

OE quality and direct fit replacement
Remanufacture based on highest quality standards
Computerized tests insure that all products meet the OE performance specification.
Performance and quality approvals from OE steering gear and pump manufacturers world wide

from

$27.49

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Easy to install
Manufactured using premium materials
Engineered to provide long life and dependability
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$21.61

Steering Rack Boot Kit

from

$296.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR “INSTALLATION READY” Power Steering Pumps are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
Features our EXCLUSIVE DIE CUT FOAM PACKAGING, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a Pre-Installed Pulley, Return line fitting, as well as the required Installation Seals, Washers, Return Line Clamp, and Instructions
Enables you to achieve a more efficient, durable, and professional installation

from

$152.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$33.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$38.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$9.99

Rein OE Quality power steering return hoses are designed to withstand the harsh environment of the engine bay area from the outside along with the hot power steering oil from within. Rein power steering return hoses are formed in accordance to OE blueprints using OE comparable braided rubber compound and include non-damaging burr-free clamps, bracket bushings, protective jacket(s), and heat sleeves(s) all as specified by the OE manufacturer.

Product Features:

A direct-fit, replacement hose with clamps
OE quality, braided rubber compound hose
Pre-attached mounting bracket bushing(s), protective jacket(s) and heat sleeve(s), where required
Ensures proper operation of the power steering system

from

$22.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
Made from a high grade rubber compound
No modification needed for installation
Quality construction for durability
Application specific for this vehicle

from

$38.49

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

Product Features:

Double lock beading with barbed tube end provides superior hose/coupling integrity
Zinc coated tubes protect against rust and corrosion

from

$46.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$6.99

POWER STEERINGFILTER

from

$31.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$28.70

An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:

High quality plastic and/or steel construction
Easy installation
Direct replacement for a proper fit every time
Quality-tested to ensure trouble-free performance and durability

from

$34.52

An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:

High quality plastic and/or steel construction
Easy installation
Direct replacement for a proper fit every time
Quality-tested to ensure trouble-free performance and durability

from

$29.49

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$34.49

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance.
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$39.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$33.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.