2002 GMC Sierra 2500 Transmission Parts

Name: Transmission Shift Interlock Solenoid
Brand: Dorman
SKU: 924-976
Price: 39.99 USD
Rating: 5.0 (3 reviews)

Below you will find various in-demand GMC Transmission Parts, components and accessories for your 2002 Sierra 2500. Advance Auto Parts has popular Sierra 2500 parts like Transmission Seals, Automatic Transmission Pan and Gaskets, Automatic Transmission Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Sierra 2500 model years including 1999, 2003, 2004 and more. Select a category of 2002 GMC Sierra 2500 Transmission Parts below and start saving instantly.

Popular 2002 GMC Sierra 2500 Transmission Parts Categories

Automatic Transmission Shifter Cable Kits

Gear Shift Levers

Automatic Transmission Shift Linkage Bushings

Transmission Torque Converters

OE Transmission Coolers

Automatic Trans Shifter Cable Levers

Torque Converter Hardware

Master and Slave Cylinder Assemblies

Transmission Control Module Bolt

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Countershaft Bearings

Automatic Transmission Torque Converter Clutch Solenoids

Back Up Lamp Switches

Transmission Pan Gaskets

Shift Interlock Solenoids

Automatic Transmission Line Connectors

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Oil Pressure Switches

Back Up and Neutral Safety Switches

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Speed Sensors

Automatic Transmission Differential Bearings

Transmission Speed Sensors

Automatic Transmission Output Shaft Seals

Automatic Transmission Gear Position Sensors

Transmission Temperature Sensors

Automatic Transmission Oil Pump Seals

Neutral Safety Switch Connectors

Transmission Drain Plugs

Miscellaneous Shift Shaft Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Back Up Light Relays

Back Up Light Switch Connectors

Torque Converter Seals

Manual Transmission Output Shaft Seals

Automatic and Manual Transmission Shift Boots

Automatic Transmission Wiring Harness Connectors

Manual Transmission Main Shafts

Miscellaneous Automatic Transmission Seals

Input Shaft Bearings

Back Up Lamp Connectors

Manual Transmission Gear Teeth

Park Position Switches

Extension Housing Bearings

Shift Shaft Seals

Vehicle Power Control Module Connector

Automatic Transmission Seals

Manual Transmission Shift Fork Inserts

Automatic Transmission Shifter Cable Brackets

Remanufactured Automatic Transmissions

Remanufactured Manual Transmissions

Manual Transmission Gears

Manual Transmission Input Shafts

Manual Transmission Synchro Sleeves

Manual Transmission Cluster Gears

Essential Transmission Parts for 2002 GMC Sierra 2500s

from

$39.99

This shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$30.49

SHAFT SEAL

from

$8.49

Product Features:

Brand may vary by location

from

$19.99

CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:

Lifecycle tested to meet or exceed OE specifications
Direct OE replacement
High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
Global coverage for import and/or domestic applications.

from

$48.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Robust design and high grade materials meet the stringent demands of today’s service professional
Our switches are manufactured under a completely quality control process from componentry to finished products by experienced professional

from

$147.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$85.99

GM Genuine Parts Parking / Neutral Position and Back Up Light Switches are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$463.99

aFe Powers new deep transmission pan brings performance engineering to the protection of your trucks transmission. This transmission pan has additional capacity for 2 more quarts over stock at the factory line, a magnetic drain plug and a 1/8″ NPT port for your temperature sensor. Built-in internal and external fins transfer heat from the fluid to the outside air for maximum cooling. This transmission pan is constructed out of durable die-cast A356 aluminum with reinforced ribs and a wrinkle black powder-coating for maximum strength and styling.

Product Features:

Internal/External Fins Transfer Heat From Fluid To Ambient Air
Large Neodymium Magnet Drain Plus Captures Loose Particles
1/8 in. NPT Port Comes Ready To Use For Your Temp Sensor
Comes Complete w/All Necessary Hardware To Bolt Directly On

from

$43.65

Replacing a damaged cooler line with Dorman’s Auto Trans Oil Cooler Hose Assembly takes you a long way in protecting your transmission. Dorman’s line’s leak-resistant design prevents the common, high-stakes problem of transmission fluid loss. Plus, its robust construction readily defends against possible damage from road debris and corrosion.

Product Features:

Includes all hardware needed for a complete repair (where applicable)
Materials used in construction have been upgraded from steel and/or rubber to corrosion-resistant aluminum (where applicable)
Direct replacement for ease of installation
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$2.62

Oil Dipstick Seal

from

$42.99

Bracket and Lever Kit for TH-350, 400, 200, 700-R4, 4L60E and 200-4R transmissions.

Product Features:

Incl. Cable Bracket/Shift Lever/Spacers
Incl. Swivel/Cotter Pin
Natural Finish
Sold as a kit
Replacement part

from

$28.99

B&M transmission bracket for General Motors 4L60E, 4L65E, 4L80E and 4L85E automatic transmissions with a PRNDL style switch.

Product Features:

Shifter Service Parts

from

$6.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$16.49

ACDelco GM Original Equipment Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$27.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$9.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$73.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to

from

$90.99

This automatic transmission oil pressure switch is designed to match the appearance and function of the original switch, and is engineered to help monitor fluid pressure in the transmission case on specified vehicles..

Product Features:

Direct replacement – this automatic transmission oil pressure switch is made to match the fit and performance of the original switch on specified vehicle makes, years and models.
Ideal solution – this switch is designed to be a reliable replacement for a switch that has failed from heat or fatigue to help restore proper timing and operation of the automatic transmission
Durable construction – this button is made from quality components and materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$188.99

For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.

from

$28.49

This transmission shift boot matches the fit and function of the original equipment boot that as become damaged or missing. Made of quality materials, this boot is designed for durability and has been validated for a proper fit.

Product Features:

Ideal replacement – this transmission shift boot matches the fit and function of the original equipment boot for specific makes and models.
Durable materials – this shift boot is manufactured from quality materials for durability
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$83.99

Automatic Transmission Shifter Cable

from

$92.99

Automatic Transmission Shifter Cable

Upgrade your 2002 GMC Sierra 2500 with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 2002 GMC Sierra 2500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Transmission Parts are key to keeping your Sierra 2500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 175 Transmission Parts for the 2002 GMC Sierra 2500, designed to meet your needs without breaking the bank. From Transmission Seal replacements to Automatic Transmission Pan and Gaskets upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 2002 GMC Sierra 2500 at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $2,984.99, with an average price of $214.79. Our 175 Transmission Parts in stock come from 31 trusted brands, so you’re sure to find the right part for your 2002 GMC Sierra 2500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 GMC Sierra 2500, we stock popular OEM and aftermarket Transmission Parts from top names like Permatex, Dorman, Imperial, and more. Permatex Transmission Parts start at just $6.99 and boast an impressive 5 stars average rating from customers. Dorman and Imperial also bring quality to the table, with Transmission Parts available starting at $4.49, and at an average 4 stars rating. With 2,097 customer reviews and counting, our 2002 GMC Sierra 2500 Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 GMC Sierra 2500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 2500 in top shape, all in one place. Start shopping confidently below for your 2002 GMC Sierra 2500!

Best-Selling Transmission Seals for 2002 GMC Sierra 2500s

Enhance the driving experience in your GMC with 17 quality Transmission Seal components, starting at $1.99.

show more show less

from

$14.79

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -20°F to 300°F / -29°C to 49°C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$12.79

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$6.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$1.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$16.49

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$7.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$9.29

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.49

Product Features:

Brand may vary by location

from

$2.49

Product Features:

Brand may vary by location

from

$27.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$67.84

Output Shaft Seal

from

$30.49

SHAFT SEAL

from

$14.99

AT OIL PUMP SEAL

from

$11.99

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$8.56

AT Pump Seal

from

$7.49

SHAFT SEAL

from

$2.62

Oil Dipstick Seal

Most Popular 2002 GMC Sierra 2500 Automatic Transmission Pan and Gaskets

Customize your GMC with 12 Automatic Transmission Pan and Gaskets products like Transmission Pan Gaskets, Transmission Oil Pan Gaskets, and Transmission Oil Pans, all priced under $96.96.

show more show less

from

$11.49

Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$6.99

High torque and rigidity
Sensor-safe, non-corrosive formula
OEM specified
Low-odor, non-corrosive formula
Ideal for closed spaced bolt patterns

from

$19.99

Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 1 minute

from

$15.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$79.99

This replacement transmission oil pan is a direct replacement for a damaged original equipment transmission pan. Made of quality materials, it’s designed for reliable, leak-free service.

Product Features:

Ideal replacement – this transmission oil pan matches the fit and function of the original pan for a trouble-free replacement.
Durable construction – this transmission oil pan is made of quality materials for durability and leak-free performance.
Cost-effective solution – offers original equipment performance at competitive price
Quality tested – this part has undergone try-on testing to ensure a quality fit

from

$16.99

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$36.99

REUSABLE AT PAN GSKT

from

$28.49

Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:

Ideal for rigid cast aluminum parts
Meets OEM Specifications
Sensor safe & non-corrosive
Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
Blowout resistant, allowing leakproof gaskets to be made in just one minute
Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.

from

$32.99

OEM specified. Designed specially for high-torque and high vibration applications, like those common in import engines, this premium RTV gasket maker exceeds manufacturers’ performance requirements. Sensor-safe, low odor, and non-corrosive. Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids. Temperature range -65ºF to 500ºF (-54 Deg. C to 260 Deg. C) intermittent.

Product Features:

Designed specially for high-torque and high vibration applications
Maximum vibration resistance with outstanding resistance to oils, cooling and shop fluids
OEM specified
Low-odor, non-corrosive formula
Temperature Range: -65 Deg. F to 500 Deg. F (-54 Deg. C to 260 Deg. C)

from

$7.29

AT OIL PAN GASKET

from

$96.96

AT Pan Gasket

from

$27.20

AT Pan Gasket

Top Picks for 2002 GMC Sierra 2500 Automatic Transmission Parts

Upgrade GMC Sierra 2500s with top-quality Automatic Transmission Parts parts, including 26 OEM and aftermarket selections for your 2002 model.

show more show less

from

$14.29

This automatic transmission shifter cable lever is designed to match the fit and function of the original lever on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this automatic transmission shifter cable lever is designed to match the fit and function of the original lever.
Restores functionality – reliable replacement for an original part that has failed due to corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$39.99

Direct replacement – this shift interlock solenoid is designed to match the fit and function of the original solenoid on specified vehicles.
Ideal solution – this solenoid is a reliable replacement for an original part that is damaged or has failed due to fatigue, excessive heat or electrical current.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$25.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Industrial grade materials
Decades of industry leading research and development focused on meeting the technician’s needs
With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$18.79

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This Dorman OE FIX shift cable bushing saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing is vehicle-specific and precision-engineered for specified Chevrolet, GMC, Isuzu, and Oldsmobile models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$23.49

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

OE Replacement

from

$148.99

ATHARNESS VSS REPR

from

$85.99

AT CONTR SOLENOID

from

$107.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of emission components, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$89.07

AT Torq Con Cl Pulse

from

$37.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$48.99

AT/HARNESS VSS REPR

from

$2984.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2984.99

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno

from

$2498.00

Our remanufactured transmissions have improved torque converters included with every transmission to eliminate the possibility of front seal leaks, vibration or premature bushing wear, All torque converters are tested for leaks, lock-up, concentricity & balance. Every fully remanufactured valve body, with complete system correction & recalibration kit, is tested independently & includes updated throttle valve, manual valve, 4-spool switch valve, pressure regulator valve & governor plugs for improved shifting, lubrication & performance. All wear-prone valves are restored to stringent specifications & vacuum tested to confirm proper function. Each remanufactured transmission is hot, cold, load & simulated road testing. All remanufactured transmissions are backed by the industry’s best, no-hassle nationwide warranty.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2494.00

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2389.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2389.99

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2069.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$212.32

AT Solenoid

from

$93.99

AT CONTR SOLENOID

from

$63.35

Shift Interlock Sole

from

$35.82

AT Solenoid

from

$28.99

B&M transmission bracket for General Motors 4L60E, 4L65E, 4L80E and 4L85E automatic transmissions with a PRNDL style switch.

Product Features:

Shifter Service Parts

from

$18.99

from

$18.99

In-Demand Transmission Mounts for 2002 GMC Sierra 2500s

Select from 4 premium Transmission Mounts parts for your 2002 GMC Sierra 2500, with prices ranging from $17.29 to $87.99.

show more show less

from

$17.29

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 00-20; CHEV 91-21; GMC 91-21;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1991-2021
Weight approx: 2 Lbs
MATERIAL: RUBBER, STEEL
HEIGHT: 2.06 INCH / 52.32 MM
STUD: M10x1.5 1.15 INCH / 29.21 MM

from

$23.49

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to CADI 99-14; CHEV 82-19; GMC 82-14; HUMMER 03-10; ISUZU 06-08; OLDS 91-94;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1982-2019
Weight approx: 5 Lbs
STUDS: M10-150
INTERLOCK
BOLT HOLES CENTERLINE: 7.5 INCH / 190.5 MM

from

$87.99

A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

from

$83.99

Unique Safety Interlock Design
Impervious to Vehicle Oils and Chemicals
Strong Enough Too Handle High Performance

Most Sold 2002 GMC Sierra 2500 Transmission Cooler and Parts

Explore our best-selling GMC parts for the 2002 Sierra 2500 among 17 OEM and aftermarket options starting from $31.99.

show more show less

from

$85.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool® XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool® plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.

from

$81.99

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.

from

$33.49

This automatic transmission oil cooler hose assembly is designed to match the fit and function of an original assembly. It is engineered from durable components as a reliable replacement for leaking or damaged lines on specified vehicles.

Product Features:

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$38.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$31.99

Direct replacement – this automatic transmission oil cooler hose assembly is designed to match the fit and function of the original equipment assembly on specified vehicle makes, models and years.
Ideal solution – engineered to help ensure proper transmission cooling when the original assembly is leaking or has failed from corrosion, collision, vibration, or fitting damage.
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$149.99

This automatic transmission oil cooler is designed to match the function of an original cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion, or damage.

Product Features:

Direct replacement – this automatic transmission fluid cooler is designed to match the function of an original cooler on specified vehicle.
Ideal solution – engineered to help maintain proper transmission fluid temperature when an original cooler has failed from heat, corrosion or damage.
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

Product Features:

Imperial Rapid-Cool« plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design

from

$81.99

High Performance Transmission Oil Cooler 3/4″ x 7-1/2″ x 15-1/2″. Heavy duty. Black. Imperial High Performance coolers are designed to provide outstanding cooling as well as complement other high-performance accessories.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion

from

$67.99

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Product Features:

Imperial Econo-Kool« tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$145.99

Oil cooler 1-1/2″ x 12″ x 15-1/8″. Extra heavy-duty. Designed for severe-duty transmission oil cooling applications.

Product Features:

Imperial Econo-Kool® tube and fin transmission cooler
Size: 1-1/2″ x 12″ x 15 1/8″
Severe-duty transmission oil cooling applications
Towing with class “A” motor home or towing more than 10,000 lbs.

from

$161.62

Many trucks and cars come equipped with Transmission Oil Coolers to maintain consistent operating temperatures for the transmission system. External Transmission Oil Coolers offer additional cooling capacity and efficiency for specific cars and trucks that have them. In addition to the Transmission Oil Coolers that are embedded into many TYC Radiators, TYC is excited to also offer externally mounted Transmission Oil Coolers.

Product Features:

OE-comparable harness (no
OE-comparable mounting provisions ensure drop-in precise fitment
Rigorous and accelerated cycling tests to ensure product service quality and durability

from

$227.85

AT Oil Cooler

from

$43.65

Includes all hardware needed for a complete repair (where applicable)
Materials used in construction have been upgraded from steel and/or rubber to corrosion-resistant aluminum (where applicable)
Direct replacement for ease of installation
Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

from

$34.20

AT Oil Cooler Hose A

Top-Rated Transmission Parts Brands For Your 2002 GMC Sierra 2500

Shop for the best-rated brands offering Transmission Parts and other products for your 2002 GMC Sierra 2500s. Below you’ll find some of our best rated Transmission Parts from Permatex, Dorman, and Imperial, and more. Transmission Parts from these brands that fit a 2002 Sierra 2500 start at just $4.49 and are rated as high as 5 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Permatex 2002 GMC Sierra 2500 Transmission Parts

When it comes to maintaining or upgrading your 2002 GMC Sierra 2500, using quality Transmission Parts is essential to ensure durability and a perfect fit. Permatex ticks all of those boxes. We offer a wide selection of Permatex Transmission Parts, specifically designed for the 2002 GMC Sierra 2500. With over 6 Permatex brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $19.49. Plus, with over 106 customer reviews and an average rating of 5 stars, you can trust that our Permatex Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$32.99

This product is not rated

Ultra Grey RTV Gasket Maker (9.5 oz.)

“”

from
$28.49

This product is not rated

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

“”

from
$16.99

This product is not rated

The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ

“”

Popular Dorman 2002 GMC Sierra 2500 Transmission Parts

Dorman auto parts is one of the highest quality Transmission Part brands in the market. Any 2002 GMC Sierra 2500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 2002 Sierra 2500, Advance Auto Parts carries a full inventory of 26 Dorman Transmission Parts. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Transmission Parts range from $4.49 to $227.85, plus, with more than 79 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from
$4.49

This product is not rated

GM Splash Shield Retainer

“”

from
$28.49

This product is not rated

Shift Lever Boot

“”

from
$9.49

This product is not rated

Torque Convertor Bolts

“”

FAQs for 2002 GMC Sierra 2500 Transmission Parts

Which Transmission Parts are best-sellers for 2002 GMC Sierra 2500s?

Out of 175 Transmission Parts that fit 2002 GMC Sierra 2500s, the following parts are the top sellers:

Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
High Performance Transmission Oil Cooler (3670013) – $81.99
Transmission Line Connector With 3/8 Tube X 5/8-18 In. Thread (9110043) – $6.79

What’s the price range for 2002 GMC Sierra 2500 Transmission Parts?

Transmission Part prices for the 2002 GMC Sierra 2500 start at $1.99 and go up to $2,984.99 for the most premium parts.

What’s the average price of a Transmission Part for a 2002 GMC Sierra 2500?

The average price for Transmission Parts for the 2002 GMC Sierra 2500 is $214.79. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other GMC Sierra 2500 model years?

Yes, we currently carry Transmission Parts for 3 model years of GMC Sierra 2500s between 1999 and 2004. Transmission Parts are bought most frequently for the following model years: 2004, 2003, and 1999.

What are the cheapest Transmission Parts for my 2002 GMC Sierra 2500?

The cheapest 2002 GMC Sierra 2500 Transmission Parts we carry in stock are:

Oil Seal (5440998) – $1.99
Auto Transmission Shift Shaft Seal (11407786) – $2.49
Oil Dipstick Seal (11844774) – $2.62
Oil Seal (5440149) – $3.49
ManTranSynchroSpring (12009332) – $3.99

What are the top-rated Transmission Parts that fit the 2002 GMC Sierra 2500?

Out of 2,097 reviews by customers, our 2002 GMC Sierra 2500 Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 2002 GMC Sierra 2500 and their top-rated products:

Automatic Transmission Pan and Gaskets
- AUTOMATIC TRANSMISSION OIL PAN GASKET (5992044) – $15.99
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Transmission Bearings
- AUTOMATIC TRANSMISSION OIL PAN GASKET (5992044) – $15.99
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49
Transmission Connectors
- AUTOMATIC TRANSMISSION OIL PAN GASKET (5992044) – $15.99
- The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (11082073) – $19.99
- Sensor-Safe, High-Torque RTV Silicone Gasket Maker (7160017) – $11.49

What types of Transmission Parts do you sell for my 2002 GMC Sierra 2500?

As of 2/5/25, these are some of the most in-demand types of Transmission Parts for a 2002 GMC Sierra 2500:

Can I get help with 2002 GMC Sierra 2500 Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Transmission Parts and more.

What is your return policy for GMC Sierra 2500 Transmission Parts?

Advance Auto Parts keeps returns simple. For new GMC Sierra 2500 Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 GMC Sierra 2500 Transmission Parts

Dorman – Transmission Shift Interlock Solenoid (Part No.924-976)

FAG US – SHAFT SEAL (Part No.SS2938)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

Carquest Premium – Automatic Transmission Fluid Temperature Sensor (Part No.WTA1322)

Carquest – Neutral Safety Switch (Part No.S9171)

Carquest Premium – Automatic Transmission Gear Position Sensor (Part No.NSE1019)

GM Genuine Parts – Park/Neutral Position and Back-Up Lamp Switch (Part No.D2263C)

aFe POWER – Transmission Pan (Part No.46-70242)

Dorman – Automatic Transmission Cooler Line (Part No.J2000323240DOR)

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

B & M – Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4 (Part No.35498)

B & M – Bracket Kit for 4L60E/4L80E (Part No.70499)

National – Multi Purpose Seal (Part No.4950)

ACDelco – Black Multi-Purpose Relay (Part No.D1780C)

National – Multi Purpose Seal (Part No.8792S)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1078)

National – Bearings (Part No.LM501310)

Dorman – GM Splash Shield Retainer (Part No.963-405D)

Carquest Premium – Automatic Transmission Oil Pressure Switch (Part No.MAC1001)

Dorman – Transmission Pressure Switch (Part No.926-429)

LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS039)

Dorman – Help – Shift Lever Boot (Part No.47106CD)

ATP – Automatic Transmission Shifter Cable (Part No.Y-1286)

ATP – Automatic Transmission Shifter Cable (Part No.Y-1285)

National – Multi Purpose Seal (Part No.4934)

National – Multi Purpose Seal (Part No.4583)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-9449)

National – Multi Purpose Seal (Part No.5208)

National – Multi Purpose Seal (Part No.714598)

National – Multi Purpose Seal (Part No.710597)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

Driveworks – Auto Transmission Shift Shaft Seal (Part No.S-8792S)

National – Multi Purpose Seal (Part No.2457)

SKF – Output Shaft Seal (Part No.J1157204657SKF)

FAG US – SHAFT SEAL (Part No.SS2938)

ATP – AT OIL PUMP SEAL (Part No.JO-122)

National – Multi Purpose Seal (Part No.714654)

SKF – AT Pump Seal (Part No.J5073366506SKF)

FAG US – SHAFT SEAL (Part No.SS2114)

Mahle – Oil Dipstick Seal (Part No.A1120666332MAH)

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)

Felpro – AUTOMATIC TRANSMISSION OIL PAN GASKET (Part No.TOS 18698)

Dorman – Transmission Oil Pan: Direct Fit, Steel, 13.5 Quart (Part No.265-810)

Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)

ATP – REUSABLE AT PAN GSKT (Part No.JG-142)

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

Permatex – Ultra Grey RTV Gasket Maker (9.5 oz.) (Part No.85084)

ATP – AT OIL PAN GASKET (Part No.JG-107)

ACDelco – AT Pan Gasket (Part No.J5040577055ACD)

Mahle – AT Pan Gasket (Part No.J5040577055MAH)

Dorman – Help – Shift Lever Arm (Part No.74124)

Dorman – Transmission Shift Interlock Solenoid (Part No.924-976)

Carquest – Automatic Transmission Control Solenoid (Part No.S9851)

Dorman – Help – Shift Cable Bushing (Part No.14073)

Dorman – GM Splash Shield Retainer (Part No.963-405D)

Pro-King – Automatic Transmission Solenoid (Part No.52-0211)

ATP – ATHARNESS VSS REPR (Part No.JE-22)

ATP – AT CONTR SOLENOID (Part No.JE-53)

Carquest – Automatic Transmission Control Solenoid (Part No.S9853)

ACDelco – AT Torq Con Cl Pulse (Part No.J4006209870ACD)

ACDelco – 6-Way Female Black Multi-Purpose Pigtail (Part No.PT392)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L80E6002T2S)

Premium Drive Train – Automatic Transmission Assembly (Part No.T4L80E6002T4)

Spartan – Automatic Transmission Assembly; GM RWD 4L80E 4-Spd (Part No.1664A-82)

Spartan – Automatic Transmission Assembly; GM AWD 4L80E 4-Spd (Part No.1659A-82)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281139)

Shift Pro by ETE – 4L80E Automatic Transmission Assembly (Part No.T281141)

Moveras – 4L80E – Automatic Transmission (Part No.M00046AC)

Vemo – AT Solenoid (Part No.J4006209882VMO)

ATP – AT CONTR SOLENOID (Part No.JE-14)

Dorman – Shift Interlock Sole (Part No.J4081960512DOR)

ACDelco – AT Solenoid (Part No.J4006209916ACD)

B & M – Bracket Kit for 4L60E/4L80E (Part No.70499)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4948)

Carquest Premium – Automatic Transmission Control Solenoid (Part No.SBA4947)