2002 GMC C3500HD Fuel and Emissions Systems

Name: Fuel Tank Pressure Sensor
Brand: GM Genuine Parts
SKU: 16238399
Price: 73.99 USD

Below you will find various in-demand GMC Fuel and Emissions Systems, components and accessories for your 2002 C3500HD. Advance Auto Parts has popular C3500HD parts like Gas Caps, Air Flow Sensors, Fuel Injectors and more. You’ll also find aftermarket and OEM Fuel and Emissions Systems for other C3500HD model years including 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and more. Select a category of 2002 GMC C3500HD Fuel and Emissions Systems below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2002 GMC C3500HD Fuel and Emissions Systems Categories

Fuel Pump Driver Modules

Diesel Injector Driver Modules

Fuel Tank Attaching Hardware

Air Flow Meters and Mass Air

Vapor Canister Purge Valves

Fuel Pump Block-Off Plate Gaskets

Fuel Pump Pressure Switches

Fuel Lift Pumps

Fuel Injector Installation Kits

Fuel Injection Pumps

MAP-Barometric Pressures

Vapor Canister Vent Valves

Manifold Air Pressure Sensors

Canister Purge Solenoids

Fuel Tanks

EGR Valves

Fuel Injectors

Ambient Air Temperature Sensor Connectors

Fuel Tank Pressure Sensors

Pressure Regulators

Air Charge Temperature Sensors

Ambient Air Temperature Sensors

Fuel Injector O-Ring Kits

Electric Pump Filter and Strainers

Smog and Vacuum Pump Pulleys

Fuel Injector Seal Kits

Fuel Tank Straps

Fuel Injector Gaskets

Fuel Tank Lock Rings

Diesel Fuel Injector Pump Driver Relocation Kits

Fuel Tank Filler Necks

Secondary Air Injection Relays

Fuel Injector Connectors

Fuel Tank Sending Units

Mass Air Flow Sensor Connectors

Fuel Pump Tank Seals

Exhaust Check Valves

Oxygen Sensor Connectors

EGR Valve Gaskets

Fuel Pump Driver Module Connectors

Fuel Sender Control Module Connector

Secondary Air Injection Pump Connectors

Ambient Air Temperature Sensor Clip

EGR Vacuum Regulator Solenoid Connectors

Diesel Fuel Injector Nozzles

Fuel Cap Tester Adapters

Fuel Sender Connectors

EGR Valve Motor Connectors

Fuel Injection Pump Installation Kits

Fuel Pump Harness

Fuel Line Seal Rings

Air Injection Bypass Valve Solenoid Connector

Diverter Valve Connectors

Idle Speed Control Motor Connectors

EGR Solenoid Valve Connector

Fuel Injector and Insulator Retainer Kits

Essential Fuel and Emissions Systems for 2002 GMC C3500HDs

from

$73.99

ACDelco GM Original Equipment Fuel Tank Pressure Sensors are GM-recommended replacements for your vehicle’s original components. These sensors help measure pressure changes within your vehicle’s fuel tank. They also help alert your vehicle’s engine management computer if a leak occurs in your vehicle’s fuel system. These original equipment sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Help measure pressure changes within fuel tank
Help alert engine management computer if a leak occurs in fuel system
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$392.99

GM Genuine Parts Diesel Fuel Injector Driver Modules are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These modules control the voltage delivered to your vehicle’s diesel engine fuel injectors. These modules help to maintain optimum fuel pressure and fuel delivery to your vehicle’s engine. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps control voltage delivered to diesel engine fuel injectors
Helps maintain fuel pressure and fuel delivery to engine
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$33.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Meets or exceeds OE specifications

from

$1344.99

CARQUEST premium remanufactured fuel injection pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

Each unit is 100% tested to OE specifications
Does not include Pump Mounted Driver (PMD)

from

$37.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$65.99

The CARQUEST line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the USA Injectors are thoroughly tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function.

Product Features:

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$102.99

CARDONE Diesel Fuel Injector Kits conveniently contain all components needed to complete the entire job, while other suppliers sell each component individually. Each kit includes everything required for installation, ensuring leak free operation and reduced crank times due to fuel leaks. Each kit contains 100% new components, ensuring trouble-free installation, keeping both you and your vehicle on the road for many years to come.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$73.99

Building upon a foundation of premium full-line products established under NGK ignition and oxygen sensor products, NTK’s expansion to technical sensors is part of our ongoing commitment to streamline product types and increase coverage under one premium brand NTK, The Sensor Specialist. With over 80 years of automotive expertise, NGK’s family of automotive products are driven by extreme dedication to innovation, performance and quality. is the only OE supplier with a full line of technical sensors in the aftermarket for import and domestic vehicles. Drawing from OE experience, sensors undergo extreme testing conditions that include thermal shock, vibration and OBD verification. sensors are manufactured to ensure a quality that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$299.99

This replacement fuel pump driver module is made in the USA with the latest technological advancements featured in original equipment modules, including a redesigned circuit board and higher temperature rated components to improve durability.

Product Features:

Advanced replacement – this fuel pump driver module matches the latest original manufacturer technology for certain vehicles
Durable components – features materials with higher temperature ratings to increase reliability
Improved design – circuit board and heat sink both redesigned to solve issues in older OE designs
Made in USA – newly manufactured at an advanced facility in the United States

from

$71.99

Product Features:

Original equipment fit, form and function

from

$13.99

This fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this fuel tank attaching hardware is designed to match the fit and function of the original hardware on specified vehicles
Recommended replacement for the original hardware when servicing or replacing the fuel tank
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$72.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$2.99

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$79.99

Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$17.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$59.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Unit is dual coated for enhanced corrosion protection
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Tested with OE fuel cap to prevent evaporative emission and check engine light failure

from

$45.49

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$108.99

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$184.99

CARDONE Remanufactured Vacuum Pumps are engineered for quick installation and no comebacks. Each unit is engineered and tested to meet or exceed O.E.M performance, providing you reliable performance, every time. Original design weaknesses are corrected to make a longer lasting part you and your vehicle can rely on.

Product Features:

100 percent NEW check valves, diaphragms, O-rings and seals prevent leaks and ensure proper vacuum required to efficiently run vehicle accessories.
100 percent computer testing guarantees reliable performance.
Engineered to meet or exceed O.E.M.performance.
Designed for easy installation.
Guaranteed fit and function.

from

$72.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$103.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$13.79

GM Genuine Parts Fuel Injector and Insulator Retainer Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$47.99

The temperature of various systems must be reported to the engine control module (ECM) as well as other operating system controllers in the vehicle. Coolant temperature, cabin temperature, exhaust temperature and ambient temperature are just a few systems reported by a temperature sensor. The temperature sensor is fed 5 volts by the systems computer, within the sensor housing will be a thermistor, or dropping resistor whose resistance value will change as the temperature surrounding it changes. Changing resistance in the circuit will change the volt signal at the processor indicating the current operating value.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$8.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$59.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$20.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Upgrade your 2002 GMC C3500HD with Top-Quality Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2002 GMC C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Fuel and Emissions Systems are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 129 Fuel and Emissions Systems for the 2002 GMC C3500HD, designed to meet your needs without breaking the bank. From Gas Cap replacements to Air Flow Sensors upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Fuel and Emissions Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Fuel and Emissions Systems for your 2002 GMC C3500HD at great prices. Our Fuel and Emissions Systems inventory for this model ranges from just $2.99 to $1,344.99, with an average price of $77.52. Our 129 Fuel and Emissions Systems in stock come from 15 trusted brands, so you’re sure to find the right part for your 2002 GMC C3500HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 GMC C3500HD, we stock popular OEM and aftermarket Fuel and Emissions Systems from top names like GM Genuine, Carquest Premium, Dorman, and more. GM Genuine Fuel and Emissions Systems start at just $29.99 and boast an impressive 4.5 stars average rating from customers. Carquest Premium and Dorman also bring quality to the table, with Fuel and Emissions Systems available starting at $7.29, and at an average 4.4 stars rating. With 973 customer reviews and counting, our 2002 GMC C3500HD Fuel and Emissions Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Fuel and Emissions System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 GMC C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place. Start shopping confidently below for your 2002 GMC C3500HD!

Best-Selling Gas Caps for 2002 GMC C3500HDs

Enhance the driving experience in your GMC with 21 quality Gas Cap components, starting at $7.99.

show more show less

from

$15.79

Product Features:

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$11.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$16.79

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$12.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$14.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$9.99

Product Features:

Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$15.99

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$16.99

Product Features:

Passes all state and federal emissions tests
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$23.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$24.99

Independently tested for emission control
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$21.79

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$22.99

Product Features:

Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$12.49

Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control

from

$7.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$31.99

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$24.29

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$11.79

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$22.99

Product Features:

Passes all state and federal emissions tests
Independently tested for emission control
Protects your fuel from theft and vandalism
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$20.99

Come pre-assembled for quick and easy installation.
Several fastener options to work with any fuel cap compartment configuration
Fits vehicles orginally equipped with tether
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

from

$10.99

Passes all state and federal emissions tests
Independently tested for emission control
Independently tested for emission control
Protects your fuel from theft and vandalism
Reduces air pollution with proper sealing and venting
Manufactured from durable, long-life materials

Most Popular 2002 GMC C3500HD Air Flow Sensors

Customize your GMC with 13 Air Flow Sensors products like MAP-Barometric Pressures, Manifold Air Pressure Sensors, and Air Charge Temperature Sensors, all priced under $106.99.

show more show less

from

$89.99

ACDelco GM Original Equipment Manifold Absolute Pressure (MAP) Sensors measure intake manifold pressure, and are GM-recommended replacements for your vehicle’s original components. The MAP sensor is a part of the fuel and engine management system. Its signal is used by the engine control module along with the throttle position sensor to calculate the amount of air entering the engine so that the correct amount of fuel is injected for optimum combustion. These original equipment manifold absolute pressure sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Sends signals to the engine controls for optimal engine performance
Designed to adjust engine performance to various altitudes
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$37.99

ACDelco GM Original Equipment Multi Purpose Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$4.99

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$67.99

CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.

Product Features:

CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.

from

$81.99

The Manifold Absolute Pressure Sensor (MAP) provides manifold pressure information to the Engine Control Unit (ECU). The data is used to determine the air mass flow rate and required fuel for optimum combustion and ignition timing.
NTK’s Manifold Absolute Pressure Sensors are manufactured to operational performance standards to meet or exceed OE fit, form and function to ensure proper manifold pressure, fuel metering and ignition timing.

from

$51.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$43.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$29.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$15.99

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
Lead frame terminal size and location determined using image dimension measuring system or 3D laser scanner.
Application matched components ensures system operation in like new condition.

from

$106.99

Manifold Absolute Pressure Sensor

from

$74.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$55.99

ACDelco GM Original Equipment Air Charge Temperature Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$30.49

Delphi’s ever growing portfolio of high quality vehicle sensors are backed by stringent OE development and product validation methods. We offer a wide range of sensors, including ABS, camshaft, crankshaft, knock, EGT, MAP, temperature, throttle position, and vehicle speed sensors for a variety of vehicle applications. All of our sensors are tested and calibrated to OE standards, ensuring accurate readings, which helps to reduce comebacks.

Product Features:

Delphi temperature sensors are built with the latest OE technology
Delphi temperature sensors are impervious to electrical noise and interference
Part is validated, tested and matched to the right vehicle application
Our temperature sensors feature a 1-piece design from sensing element tip to connector terminals to eliminate internal connectors and failure points

Top Picks for 2002 GMC C3500HD Fuel Injectors

Upgrade GMC C3500HDs with top-quality Fuel Injectors parts, including 19 OEM and aftermarket selections for your 2002 model.

show more show less

from

$146.99

Every single Delphi mass air flow (MAF) sensor that we manufacture – whether with or without the housing – is built with calibrated all-new components and is never remanufactured. Our mass air flow sensors are designed and tested to meet or exceed OE requirements, and engineered for a perfect fit in more than 180 million vehicles on the road today in North America – including makes from Ford, Toyota, Nissan, Volkswagen, Hyundai, BMW, Honda, GM, Mazda, Subaru, Acura and more.

Product Features:

Delphi mass air flow sensors are the global benchmark for accuracy and signal noise
Delphi mass air flow sensors feature high quality sensing elements for outstanding performance over a wide range of ambient temperatures
Delphi is a manufacturer of OE mass air flow sensors since their first use over 30 years ago
All parts are calibrated and tested to match the OE part
Probe solution offered wherever possible to reduce repair time by eliminating the need to replace the flow tube
Delphi OE technology validated to match the vehicle applications

from

$29.99

GM Genuine Parts Fuel Injector Seal Kits are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These seals help provide liquid-tight connections between the fuel injector and related components. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a seal to prevent fuel leaks
Helps seal combustion chamber from the elements
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$121.99

This diesel fuel injector pump driver relocation kit is designed to match the original components required to relocate the fuel injector pump on specified vehicles. It’s made of quality components for reliable performance.

Product Features:

Direct replacement – this diesel fuel injector pump driver relocation kit is designed to match the original components required to repair the fuel injector pump on specified vehicles
Ideal solution – this kit is a reliable replacement for original components
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$92.99

Carquest Premium mass air flow (MAF) sensors are built to meet the original equipment (OE) specifications for each application. Our MAF sensors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium mass air flow sensors are 100% new and undergo extensive validation testing to ensure long-lasting performance and reliability.

Product Features:

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$112.99

ACDelco GM Original Equipment Fuel Injection Pressure Regulators are mechanical valves that control fuel pressure in the fuel injector rail, and are GM-recommended replacements for your vehicle’s original components. Their spring-loaded valves return excess fuel back to the fuel tank. These original equipment fuel injection pressure regulators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Helps provide constant fuel pressure to the injectors
Assists in cold engine starts
Helps maintain stable engine idle
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$3.99

CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Includes hard to find or previously dealer-only components.

Product Features:

Premium OE quality materials
Services one injector

from

$10.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$94.99

Designed to meet OE specifications for fit, form and function
100% new unit with no core charge
Advanced micro-controlled technology delivers more accurate output in extreme temperatures
Extensive validation testing to ensure precision output for better performance and reliability
O-rings or gaskets included where applicable

from

$94.99

WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to OE designs. Every component either matches or improves on the OE design to ensure fast, easy installation, superior performance and reliability.

Product Features:

Application matched components ensure fuel injection system meets all emission regulations.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$44.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$95.99

CARQUEST new diesel fuel injectors are manufactured using state of the art equipment to ensure long life and trouble-free operation. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$73.99

CARQUEST precision remanufactured injectors are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each injector is 100% tested to meet or exceed OE performance specifications.

Product Features:

Premium OE quality materials
Includes copper combustion seal

from

$13.79

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$103.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation

from

$139.99

Delphi’s history is one of OE heritage and quality. Our global technical requirements include design specifications and validation testing based on over 100 years of OE experience. Our material selections, material thickness, and material types are built from OE specifications to exceed aftermarket expectations. We put in place strict manufacturing processes to ensure quality control in every part we make. Delphi’s pioneering spirit delivers innovative solutions designed to support the aftermarket in servicing the vehicles of today, and tomorrow.

Product Features:

100% O Ring replacement
All Delphi injectors are tested utilizing OE methodologies
Delphi injectors are produced in a Delphi ISO 9001:2008 certified facility
No internal seal rings equals minimized leakage
Recessed fuel exit minimizing possible plugging
Reduced spray variation, accurate fuel spray pattern mean better emissions and cold start capabilities
Thermally isolates fuel from engine by drawing manifold heat away from the fuel rail eliminating engine hesitation due to vapor lock

from

$102.99

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$67.99

CARDONE Fuel Injection Pump Installation Kits provide the option of not replacing the entire oil rail, providing an easy fix and saving you hundreds of dollars. Paired with CARDONE’s premium Oil Rail Removal Tool (2K-205T), this repair kit allows technicians and vehicle owners to repair expensive high-pressure oil issues in a fraction of the time.

Product Features:

All in one kit makes the installation job easier and faster, as these components are typically sold separately from O.E.M. suppliers
Each installation kit includes everything required (gaskets, O-rings, sealing washers, etc.) for proper installation
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$59.99

Each unit is 100% tested to OE specifications
Includes new O-rings and seals made of premium OE quality materials
Includes application specific technical bulletin, where applicable

from

$8.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

In-Demand Fuel Pumps for 2002 GMC C3500HDs

Select from 20 premium Fuel Pumps parts for your 2002 GMC C3500HD, with prices ranging from $3.99 to $1,344.99.

show more show less

from

$3.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$56.99

ACDelco GM Original Equipment Engine Oil Pressure Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$18.99

Filtration performance meets or exceeds OE requirements
Micron rating meets or exceeds OE requirements
OE replacement strainer designed for use with Delphi electric fuel pumps
Replacing the strainer is always recommended when replacing a fuel pump

from

$102.99

Carquest Premium electric fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Our Carquest Premium fuel pumps are built to be installed in the Original Equipment module or assembly. We have invested in industry-leading quality upgrades, like upgraded turbine impellers and 100% carbon commutators, to deliver greater reliability. Carquest Premium electric fuel pumps are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested

from

$119.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Delphi pumps are designed to operate under extreme temperatures with quick engine starts
Improved pump performance as a result of Delphi’s innovative design and durability
Restores fast pressure performance and system integrity, translating to better pumping through less energy
Part is validated, tested and matched to the right vehicle application
Lower amperage draws less load on vehicle’s electrical system
Always be sure to check and clean fuel tank to avoid unnecessary returns
Always replace the fuel strainer when doing a fuel pump repair

from

$248.99

Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.

Product Features:

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$299.99

Advanced replacement – this fuel pump driver module matches the latest original manufacturer technology for certain vehicles
Durable components – features materials with higher temperature ratings to increase reliability
Improved design – circuit board and heat sink both redesigned to solve issues in older OE designs
Made in USA – newly manufactured at an advanced facility in the United States

from

$91.99

GM Genuine Parts Electrical Fuel Pumps are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These pumps deliver fuel to your vehicle’s fuel injectors, helping to provide a steady, reliable fuel supply to your vehicle’s engine. Electric pumps are offered in standard turbine or modular assembly as specified for each application. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$71.99

Product Features:

Original equipment fit, form and function

from

$16.99

Each wire harness is designed to meet or exceed the performance of the original unit
Engineered with the same stringent standards applied to the parts we make for the top global OEMs
Delphi wire harnesses are designed and reliably work for the life of your fuel system
Wiring harness is designed to correct known application issues

from

$376.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
Lower amperage draws less load on vehicle’s electrical system
Part is validated, tested and matched to the right vehicle application
Always be sure to check and clean fuel tank to avoid unnecessary returns
Lower failure rates due to its innovative design and durability

from

$1344.99

Each unit is 100% tested to OE specifications
Does not include Pump Mounted Driver (PMD)

from

$1344.99

Each unit is 100% tested to OE specifications
Includes 100% replacement of Pump Mounted Driver (PMD)

from

$457.99

Fuel Pump and Level Sensor Module with Seal, Float, and Harness

Product Features:

Helps provide a reliable fuel supply to your vehicle’s engine
Electrical connections are designed to help eliminate high resistance due to vehicle vibration
Designed to optimize pump life and reduce fuel pump noise
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$205.99

Meets or exceeds OE specifications for fit, form and function
100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
OE upgraded turbine impellers greatly reduce fuel pulsation
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$75.99

Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
All pumps are functionally tested for correct operation which improves pump reliability
Exact fit original equipment replacements means easy installation
Consistent pressure at all operating temperatures results in quick start ups
Pump is designed for diesel engines and applications
Always check the fuel filter when replacing the fuel pump

from

$56.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$35.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.

from

$34.99

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

from

$17.79

Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.

Product Features:

BAR Certified adapters
Adapter check’s a fuel cap’s ability to hold pressure.
Adapters meet EPA standards for recommended fleet coverage.
Check adapter application chart for specific makes and models

Most Sold 2002 GMC C3500HD Oxygen Sensors

Explore our best-selling GMC parts for the 2002 C3500HD among 5 OEM and aftermarket options starting from $47.99.

show more show less

from

$109.99

GM Genuine Parts Oxygen (O2) Sensors are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These sensors are special feedback sensors on your vehicle’s exhaust system and measure the proportion of oxygen in exhaust gases. Using this measurement, the engine control module (ECM) can adjust the airfuel ratio to near the optimal value of 14.7:1. At this ratio, engine performance, emissions, and fuel economy are all optimized. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

This part requires programming andor special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Detects oxygen content in the exhaust gases to help optimize emissions
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$111.99

NGK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$79.99

NGK is the sensor specialist for import and domestic applications. Established under the NGK product family, oxygen sensors are part of our ongoing commitment to streamlining product types and increasing coverage. A ceramic company at our core, uses cutting-edge technology to control the ceramic used in our oxygen sensors from raw material to finished product. is the world’s largest supplier and manufacturer of OE oxygen sensors. Combining expertise and innovation, oxygen sensors deliver superior fit, form, and function. oxygen sensors undergo extensive testing during manufacturing to ensure quality and reliability that meets or exceeds OE specifications. As new vehicles incorporate connected and automated technologies, trust The Sensor Specialist for comprehensive market support and OE application technology.

Product Features:

OEM QUALITY: is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, Oxygen Sensors offer superior OE fit, form, function
OE TECHNOLOGY: Upgraded to the latest OE technologies, Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
EASY INSTALLATION: Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability

from

$72.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$47.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

Top-Rated Fuel and Emissions Systems Brands For Your 2002 GMC C3500HD

Shop for the best-rated brands offering Fuel and Emissions Systems and other products for your 2002 GMC C3500HDs. Below you’ll find some of our best rated Fuel and Emissions Systems from GM Genuine, Carquest Premium, and Dorman, and more. Fuel and Emissions Systems from these brands that fit a 2002 C3500HD start at just $7.29 and are rated as high as 4.5 stars. OEM and aftermarket Fuel and Emissions Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular GM Genuine 2002 GMC C3500HD Fuel and Emissions Systems

When it comes to maintaining or upgrading your 2002 GMC C3500HD, using quality Fuel and Emissions Systems is essential to ensure durability and a perfect fit. GM Genuine ticks all of those boxes. We offer a wide selection of GM Genuine Fuel and Emissions Systems, specifically designed for the 2002 GMC C3500HD. With over 3 GM Genuine brand Fuel and Emissions Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $29.99, with an average price of just $41.32. Plus, with over 26 customer reviews and an average rating of 4.5 stars, you can trust that our GM Genuine Fuel and Emissions Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $29.99

(1)

Fuel Injector O-Ring Kit with Assorted O-Rings

“Exactly what my son needed!! Awesome FREE home delivery option via DoorDash!!”

from $55.99

(4)

Vapor Canister Purge Valve

“Easiest fix yet. Youtube where it goes took longer than actual install”

from $37.99

(21)

Multi-Purpose Temperature Sensor

“Didnt realize the Aztec and the Tbi 355 5.7 carried the same part? Who woulda thunk it with my unlucky streak? Bought this item awhile back blew my az”

Popular Carquest Premium 2002 GMC C3500HD Fuel and Emissions Systems

Carquest Premium auto parts is one of the highest quality Fuel and Emissions System brands in the market. Any 2002 GMC C3500HD owner should feel confident when installing genuine Carquest Premium parts in their vehicle. To ensure the best fit and performance for your 2002 C3500HD, Advance Auto Parts carries a full inventory of 3 Carquest Premium Fuel and Emissions Systems. Plus you will be keeping your GMC in peak condition while saving money because prices on these Carquest Premium Fuel and Emissions Systems range from $11.99 to $16.79, plus, with more than 8 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Fuel and Emissions Systems below will deliver on both quality and value.

from $15.79

(4)

Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack

“Fits and works as expected.”

from $16.79

(1)

Keyed Alike Locking Fuel Cap

“Work geeat”

from $11.99

(3)

Keyed Alike Locking Fuel Cap

“Worked fine”

FAQs for 2002 GMC C3500HD Fuel and Emissions Systems

Which Fuel and Emissions Systems are best-sellers for 2002 GMC C3500HDs?

Out of 129 Fuel and Emissions Systems that fit 2002 GMC C3500HDs, the following parts are the top sellers:

Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (18481528) – $14.99
Non-Locking Tethered Fuel Tank Cap (12102600) – $24.29
New Mass Air Flow Sensor – Complete Assembly (11887172) – $92.99

What’s the price range for 2002 GMC C3500HD Fuel and Emissions Systems?

Fuel and Emissions System prices for the 2002 GMC C3500HD start at $2.99 and go up to $1,344.99 for the most premium parts.

What’s the average price of a Fuel and Emissions System for a 2002 GMC C3500HD?

The average price for Fuel and Emissions Systems for the 2002 GMC C3500HD is $77.52. Keep in mind the variety of part types within our Fuel and Emissions System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Fuel and Emissions Systems for other GMC C3500HD model years?

Yes, we currently carry Fuel and Emissions Systems for 10 model years of GMC C3500HDs between 1991 and 2001. Fuel and Emissions Systems are bought most frequently for the following model years: 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Fuel and Emissions Systems for my 2002 GMC C3500HD?

The cheapest 2002 GMC C3500HD Fuel and Emissions Systems we carry in stock are:

Exhaust Gas Recirculation (EGR) Valve Gasket (12521989) – $2.99
Fuel Feed Pipe O-Ring (15730384) – $3.49
Fuel Pump Mounting Gasket (5183804) – $3.99
Fuel Injector Seal Kit (11450036) – $3.99
Multi-Purpose Fuel Line O-Ring (11930867) – $3.99

What are the top-rated Fuel and Emissions Systems that fit the 2002 GMC C3500HD?

Out of 973 reviews by customers, our 2002 GMC C3500HD Fuel and Emissions Systems have an average customer rating of . These are some of the highest-rated Fuel and Emissions System types for the 2002 GMC C3500HD and their top-rated products:

Vapor Canister Purge Valves
- Vapor Canister Purge Valve (15730292) – $55.99

What types of Fuel and Emissions Systems do you sell for my 2002 GMC C3500HD?

As of 3/1/26, these are some of the most in-demand types of Fuel and Emissions Systems for a 2002 GMC C3500HD:

Can I get help with 2002 GMC C3500HD Fuel and Emissions System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Fuel and Emissions Systems and more.

What is your return policy for GMC C3500HD Fuel and Emissions Systems?

Advance Auto Parts keeps returns simple. For new GMC C3500HD Fuel and Emissions Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 GMC C3500HD Fuel and Emissions Systems

GM Genuine Parts – Fuel Tank Pressure Sensor (Part No.16238399)

GM Genuine Parts – Fuel Pump Driver Module with Plate and Bolts (Part No.19209057)

Victor Reinz – Fuel Injection Plenum Gasket Set (Part No.15-10324-01)

Carquest Premium – Remanufactured Diesel Fuel Injection Pump without PMD (Part No.AM9101L3)

Carquest Premium – Multi-Use Connector (Part No.PTA1174)

Carquest Premium – Remanufactured T/B Fuel Injector (Part No.A114-1173)

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0089)

Dorman – Diesel Fuel Pump Driver Module (Part No.904-104XD)

Carquest Premium – Pump Mounted Driver Harness (Part No.AC20472)

Dorman – Help – Fuel Tank Strap Hardware Kit (Part No.55157)

GM Genuine Parts – Multi-Purpose Relay (Part No.19118886)

ACDelco – 4-Way Male Gray Multi-Purpose Pigtail (Part No.PT1366)

Felpro – Fuel Pump Mounting Gasket (Part No.6579)

Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.EVA1003)

Delphi – Electric Fuel Pump: Hose Clamps, Hose Piece, Insulating Sleeve, Isolator, Seals (Part No.FE0112)

Carquest Premium – Multi-Use Connector (Part No.PTA1827)

Spectra Premium – Fuel Filler Neck (Part No.FN724)

GM Genuine Parts – 5-Way Female Gray Multi-Purpose Pigtail (Part No.PT1154)

Dorman – Fuel Sending Unit without Pump (Part No.692-055)

Cardone – Remanufactured Vacuum Pump (Part No.64-1025)

Carquest Premium – EGR Valve (Part No.EGC1023)

Carquest Premium – PMD Mounting Kit (Part No.AC20672)

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1312)

Victor Reinz – Fuel Injector O-Ring Kit (Part No.18-10027-01)

GM Genuine Parts – 2-Way Female Black Multi-Purpose Pigtail (Part No.PT288)

Motorad – Locking Tethered Diesel Fuel Tank Cap (Part No.MGC517T)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10819D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17591D)

Carquest Premium – Fuel Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830)

Carquest Premium – Fuel Cap: Round, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10837)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10834)

Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)

Carquest Premium – Locking Fuel Tank Cap (Part No.10501)

Carquest Premium – Non-Locking Fuel Tank Cap (Part No.10819)

Carquest Premium – Locking Fuel Tank Cap (Part No.10591)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10591D)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10504)

Carquest Premium – Locking Fuel Tank Cap (Part No.10507)

Carquest Premium – Diesel Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10830D)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17504)

Carquest Premium – Locking Diesel Fuel Tank Cap (Part No.10501D)

Motorad – Non-Locking Tethered Fuel Tank Cap (Part No.MGC817T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17507)

Carquest Premium – Locking Fuel Cap: Screw On, Direct Fit, Provides Tight Seal, 1 Pack (Part No.17501D)

Motorad – Locking Tethered Diesel Fuel Tank Cap (Part No.MGC517T)

Carquest Premium – Keyed Alike Locking Fuel Cap (Part No.17505)

ACDelco – Manifold Absolute Pressure (MAP) Sensor (Part No.213-796)

GM Genuine Parts – Multi-Purpose Temperature Sensor (Part No.213-928)

Dorman – Panel Retainer (Part No.963-056D)

Carquest Premium – New Map Sensor (Part No.ECC1011)

NTK – Manifold Absolute Pressure Sensor (Part No.MA0097)

GM Genuine Parts – Black Multi-Purpose Pigtail (Part No.PT1274)

Carquest Premium – Multi-Use Connector (Part No.PTA1398)

Carquest Premium – Multi-Use Connector (Part No.PTA1107)

Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1069)

GM Genuine Parts – Manifold Absolute Pressure Sensor (Part No.19418808)

Carquest Premium – Multi-Use Connector (Part No.PTA1424)

GM Genuine Parts – Air Temperature Sensor (Part No.213-192)

Delphi – Air Charge Temperature Sensor (Part No.TS10080)

Delphi – Mass Air Flow Sensor (Part No.AF10043)

GM Genuine Parts – Fuel Injector O-Ring Kit with Assorted O-Rings (Part No.217-1588)

Dorman – Pump Driver Module Relocation Kit (Part No.904-113)

Carquest Premium – New Mass Air Flow Sensor – Complete Assembly (Part No.MQ7202)

GM Genuine Parts – Fuel Injection Pressure Regulator Kit with Clip and Snap Ring (Part No.217-3073)

Carquest Premium – Fuel Injector Seal Kit (Part No.AS017)

Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 90176-1)

Carquest Premium – New Mass Air Flow Sensor – Sensor Only (Part No.MQ6223)

Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1070)

Carquest Premium – Multi-Use Connector (Part No.PTA1096)

Carquest Premium – New Diesel Fuel Injector (Part No.AN11053)

Carquest Premium – Remanufactured Diesel Fuel Injector (Part No.AD11053)

GM Genuine Parts – Fuel Injector Retainer Kit with Clip (Part No.12570620)

Carquest Premium – PMD Mounting Kit (Part No.AC20672)

Delphi – Fuel Injector (Part No.FJ10494)

Cardone – Fuel Injector Installation Kit (Part No.2K-102)

Cardone – Fuel Injection Pump Installation Kit (Part No.2K-103)