2002 Chrysler 300M Air Conditioning Parts

Essential 2002 Chrysler 300M Air Conditioning Parts

Carquest Premium – A/C Liquid Line Hose Assembly w/o Orifice Tube (Part No.T56985)

A/C Liquid Line Hose Assembly w/o Orifice Tube

from

$50.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Factory Air – Standard Relay (Part No.36126)

Standard Relay

from

$19.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Precision engineered
  • OE style molded connectors
  • Quality contacts ensure proper conductivity
  • Vehicle specific applications
See More

Factory Air – New Nippondenso 10PA Clutch Assembly w/ Coil (Part No.47320)

New Nippondenso 10PA Clutch Assembly w/ Coil

from

$95.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Carquest Premium – A/C Condenser (Part No.3151)

A/C Condenser

from

$182.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – AC Pressure Sensor (Part No.ABA1009)

AC Pressure Sensor

from

$58.99
The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.
See More

Carquest Premium – A/C Filter Drier w/ Pad Mount (Part No.T83104)

A/C Filter Drier w/ Pad Mount

from

$25.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.

Product Features:
  • All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators and receiver driers are helium leak tested prior to packaging.
  • O-Rings necessary for installation are included.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTE1401)

HVAC Blower Motor Resistor Connector

from

$84.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – ABS Wheel Speed Sensor (Part No.ARC1645)

ABS Wheel Speed Sensor

from

$128.99
Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:
  • High grade materials that are equal to or better than OE provide durability and long service life
  • All ABS sensors are tested for proper fit, form, and function
  • Wire diameter and sheathing same or larger than OE to ensure product quality
  • Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
  • Includes all necessary brackets and hardware
See More

Carquest Premium – A/C Compressor Relay Connector (Part No.PTA1465)

A/C Compressor Relay Connector

from

$44.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – A/C New; w/ Clutch; w/ 10PA17C Compressor (Part No.T58344)

A/C New; w/ Clutch; w/ 10PA17C Compressor

from

$246.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Santech – A/C Pressure Switch (Part No.R1054406459SII)

A/C Pressure Switch

from

$73.31
A/C Pressure Switch

Carquest Premium – HVAC Control Switch (Part No.BLE1053)

HVAC Control Switch

from

$478.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – A/C and Heater Relay (Part No.R3177)

A/C and Heater Relay

from

$23.29
Product Features:
  • Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
  • Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
  • All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
See More

Carquest Premium – Multi Purpose Relay (Part No.RAA1235)

Multi Purpose Relay

from

$10.49
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – Cap and Valve A/C System Seal Kit (Part No.26782)

Cap and Valve A/C System Seal Kit

from

$17.79
Compatible with both R12 And R134a refrigerants; All the seals needed to complete the job; SUV And rear air applications; Application specific
See More

Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T39061)

A/C Block Type O-Ring Expansion Valve

from

$34.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

KAI – A/C Expansion Valve (Part No.ACX011310)

A/C Expansion Valve

from

$38.99
New Standard Replacement A/C Expansion Valve

Product Features:
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest Premium – A/C Plate and Fin Evaporator (Part No.T54571)

A/C Plate and Fin Evaporator

from

$90.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

KAI – A/C Evaporator Core (Part No.EVA010586)

A/C Evaporator Core

from

$164.99
New Standard Replacement A/C Evaporator Core

Product Features:
  • Made Of Aluminum
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Carquest – Electrical Connector (Part No.PT914)

Electrical Connector

from

$54.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
  • Decades of industry leading research and development focused on meeting the technician’s needs
  • With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
See More

Carquest Premium – A/C Discharge Line Hose Assembly (Part No.T56705)

A/C Discharge Line Hose Assembly

from

$77.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

Carquest Premium – A/C Suction Line Hose Assembly (Part No.T56704)

A/C Suction Line Hose Assembly

from

$76.99
Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
  • Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
  • Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
  • Welds and crimps meet and exceed original equipment tension specifications.
  • Manufactured to allow flexibility in the hose to conform to engine compartments.
  • O-Rings necessary for installation are included.
See More

2002 Chrysler 300M Air Conditioning Parts

Maybe you’re in the middle of a full rebuild of that 2002 Chrysler 300M. Maybe you just need a couple of Air Conditioning Parts. Either way, Advance Auto Parts has 28 different Air Conditioning Parts in our inventory ranging from $10.49 to $478.99. That means you can find the exact parts or products you need to keep that 2002 Chrysler 300M running smoothly.

Air Conditioning Parts are only as good as their brand. We stock 5 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Chrysler 300M. Carquest, Carquest Premium, and Factory Air are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Air Conditioning Parts for your 2002 Chrysler 300M, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 118 reviews in this category, some of the top rated parts include Cap and Valve A/C System Seal Kit with 2.4 stars and A/C Plate and Fin Evaporator with 3.7 stars.

So if you’re in the market for aftermarket Air Conditioning Parts to keep your 2002 Chrysler 300M rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Air Conditioning Parts Brands To Make Your 2002 Chrysler 300M Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Chrysler 300M demands trusted brand parts and products to keep it running. Many trusted brands of Air Conditioning Parts make up Advance Auto Parts’ inventory, and all are ready to help make your 300M the best it can be. Be sure to browse some of our top Air Conditioning Parts brands and parts.

Popular Carquest Air Conditioning Parts

We carry Carquest parts in our stock across Air Conditioning Relays and AC Compressor Without Clutch categories, plus more. For a 2002 Chrysler 300M, our most popular Carquest Air Conditioning Parts include:
A/C and Heater Relay
from $23.29
(24)
A/C and Heater Relay
Air Conditioning Relays
Reman Nippondenso 10PA17C Compressor w/ Clutch
from $214.99
(4)
Reman Nippondenso 10PA17C Compressor w/ Clutch
AC Compressor Without Clutch

FAQs for 2002 Chrysler 300M Air Conditioning Parts

What are the most purchased Air Conditioning Parts for the 2002 Chrysler 300M?

Out of 28 Air Conditioning Parts for the 2002 Chrysler 300M, the most popular in our inventory are:
Multi Purpose Relay
from $19.99
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Multi Purpose Relay
from $10.49
This product is not rated
Multi Purpose Relay
Air Conditioning Relays
Standard Relay
from $19.99
(7)
Standard Relay
AC Compressor Relays

What are the top-rated 2002 Chrysler 300M Air Conditioning Parts?

Top-rated Air Conditioning Parts for your 2002 Chrysler 300M based on customer reviews/ratings are:
Cap and Valve A/C System Seal Kit
from $17.79
(12)
Cap and Valve A/C System Seal Kit
“It’s a generic kit but the valve I needed fit perfectly.”
A/C Plate and Fin Evaporator
from $90.99
(3)
A/C Plate and Fin Evaporator
“the EOM part price is ridiculous. This unit seems to be the right alternative. However, the unit does not come with the OEM wrapping gasket. OEM Kit p”
New Compressor
from $257.99
(2)
New Compressor
“In stock locally”