2002 Chevrolet Corvette Performance and Racing Products

Name: Shift Improver Kit For 93-02 4L60E
Brand: B & M
SKU: 70360
Price: 86.99 USD

Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2002 Corvette. Advance Auto Parts has popular Corvette parts like Performance Air Filters, Performance Ignition Products, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Corvette model years including 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 and more. Select a category of 2002 Chevrolet Corvette Performance and Racing Products below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2002 Chevrolet Corvette Performance and Racing Products Categories

Performance Engine Coolant Thermostats

Performance Intake Manifolds

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Air Intake Kits

Performance Exhaust Headers

Performance Shifters

Performance Exhaust System Kits

Performance Engine Water Pumps

Performance Engine Camshaft and Lifter Kits

Performance Engine Timing Sets and Components

Performance Spark Plug Wires

Performance Flywheel and Flexplates

Performance Exhaust Manifold Gaskets

Performance Upper Performance Control Arm Bushings

Performance Engine Rocker Arms

Performance Engine Camshafts

Performance Ring and Pinions

Performance Lower Control Arm Bushings

Performance Engine Valve Lifters

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Transmission Shift Kits

Performance Engine Push Rod Guideplates

Performance Engine Push Rods

Performance Brake Hose Kits

Performance Engine Valve Spring Retainer

Performance Torque Converters

Performance Ignition Systems

Nitrous Oxide Plate

Performance Engine Valvetrain Kit

Essential Performance and Racing Products for 2002 Chevrolet Corvettes

from

$86.99

The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:

Provides Crisp Shifts
On Any Stock Automatic Transmission
Eliminates Soft/Sluggish Shift
Eliminates Shift Overlap
Eliminate Clutch and Band Wear
Improves Transmission Life
Transmission Removal Not Required

from

$666.99

Trinity 2

from

$419.99

The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems And delivers higher levels of horsepower And acceleration gains for specific Chevrolet Corvette models. This air intake starts with an AIRAID premium air filter for outstanding air flow And filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings And calibration. This MXP air intake system has provisions for the factory mass air sensor, inlet air temperature sensor And crankcase vent tube. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on And go! This air intake system is backed by AIRAID’s No Hassle limited lifetime warranty. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View this product’s vehicle applications to determine the legal status for each vehicle.

from

$88.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Compatible with late model GM computer controlled remote mount HEI systems. Direct bolt-in, plug-in replacement. Brass coil wire contact increases energy transfer and resists corrosion better than aluminum. Complete with new mounting hardware.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Highly Specialized Silicone Magnetic Steel Cores
Standard Motor Products SMP DR-37
MSD 8226
Resist Corrosion
W/New Mounting Hardware

from

$637.99

BIG BLOCK CHEVY HYDRAULIC CAM AND LIFTER KIT – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.

Product Features:

Cam and lifter kit for Big Block Chevy engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – High Energy: Performance with slight rough idle in 396. Great for heavy towing in 454 c.i.
268/268 Advertised Duration, 218/218 Duration @ .050″, .485″/.485″ Lift, 110 Lobe Separation

from

$491.99

LS Cast Iron Exhaust Manifold

from

$10.99

11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring

from

$1399.99

The MagnaFlow 1997-2004 Chevrolet Corvette Street Series Axle-Back Performance Exhaust System brings enhanced engine sound and dyno-proven performance to your 5.7L 1997-2004 Chevrolet Corvette with a healthy helping of our deep, resonant signature exhaust note at Moderate exterior and Mild interior sound levels. Thanks to its durable, corrosion resistant stainless steel design, this Chevrolet Corvette exhaust system will handle whatever tarmac you decide to leave your mark on. This performance exhaust kit features an axle-back layout designed to replace your Chevrolet Corvette’s exhaust system from near the rear axle on back. With its fast-flowing, mandrel bent 2.5in. main piping and 2 Straight-Through mufflers ending in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, your ride will be sounding as awesome as it looks. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 16732 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s limited finish warranty and limited construction warranty.

Product Features:

Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques
Dyno-proven performance

from

$511.99

This Hurst Billet Plus shifter for 1997-2004 Corvette with a Borg Warner T-56, features a CNC machined billet aluminum base, adjustable positive gear stops to help prevent internal transmission damage, and a high strength steel stick.

Product Features:

Billet Aluminum Base and Stop Collar
Heat Treated Steel Gear Select
Adjustable Positive Gear Stops
Stainless Steel Rotating Pivot
High Ratio Pivot Mechanism

from

$49.99

With Mr. Gasket cam degree bushings you fine tune the camshaft timing of your engine to as little as 1 degree. Even aftermarket timing sets with multiple keyways can’t give the range of adjustment these bushings allow. Retard your camshaft to lower the powerband for more low end torque and midrange horsepower, or advance for more top end power. This kit does even number adjustment 0-8 degrees.

Product Features:

Advance the cam for increased torque and horsepower
Tune your powerband for more end torque or increase top end horsepower
Includes (4) offset bushings and (1) 0 degree bushing
Cam sprocket dowel pin hole must be drilled to .406¿ (13/32¿) dia.
Cam sprocket dowel pin hole must be drilled to .406┐ (13/32┐) dia.
Increase Top-End Horsepower

from

$101.99

Mr. Gasket competition screw-in rocker arm studs are manufactured from heat treated black oxide coated Grade 8 steel. Ideal for high performance street and race applications.

Product Features:

Black Oxide Coated Grade 8 Steel
Kit Contains 16 Studs
Easy To Install
Heat Treated Steel
Prevents Stud Flexing
Black Plated Finish

from

$68.99

K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!

Product Features:

ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills

from

$323.99

For a long time, racers have known that one of the best things to do to an engine to improve its performance is to stabilize the ignition timing. The MSD flying magnet crank trigger system does exactly that by using magnets embedded in an aluminum wheel. The MSD flying magnet crank trigger uses four magnets secured in the aluminum trigger wheel that pass by a stationary non-magnetic pick-up to trigger the ignition. This flying magnet design produces accurate trigger signals and the non-magnetic pick-up cannot be false triggered. Each flying magnet crank trigger includes a two-piece mounting bracket for the non-magnetic pick-up that in most cases will work on either the passenger side or driver’s side of the engine (the SB Chrysler and SB Ford brackets mount on only one side). The adjustable bracket provides a wide range of timing adjustment and spacers are included. These systems will trigger MSD 6, 7, 8 and 10 series ignitions and all MSD timing accessories.

Product Features:

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$483.99

Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$108.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$90.99

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$719.99

COMP Cams GM LS Series RPM Valve Train Upgrade Kits replace stock valve train components for more usable horsepower and a higher rpm operating range. This kit includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers.

Product Features:

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

from

$44.49

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Has A Steel Core With Graphite Facing
Graphite Facing Has Excellent Thermo-conductivity
Can Be Trimmed If Necessary For Modified Port App

from

$37.99

Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:

Opens sooner than stock at 160 degrees
High flow design for performance applications
Includes rubber o-ring seal/gasket
Incorporates pressure relief valve

from

$13.99

High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6.

from

$259.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$6.29

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$191.99

RngPnn

from

$551.99

Edelbrock #8895 Water Pump GM gen III ls1 & gen iv ls engines insert style ideal to prevent overheating in street rods and street machines, as well as in tow rigs and motorhomes. Using state-of-the-art racing technology, Edelbrock has designed these “supe

Product Features:

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
6.00 in. Block To Hub Height
Natural Finish

from

$173.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1955-85 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1990 and earlier GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$235.99

As performance levels increase, an O.E. style flexplate just won’t cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance flexplate designed for 1986 to 1997 small block Chevy V8 engines (externally balanced) with one piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, 10.75 inch bolt pattern, 153 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953. Compatible with Powerglide, TH350, TH400 and TH700R4 automatic transmissions.

Product Features:

NHRA/IHRA Legal For All Classes
Includes SFI Certification Sticker
Ideal For Street Applications
To Extreme Duty Racing
To High RPM Use

from

$492.99

Based on performer RPM-series with unique air gap. Air gap cooler and denser mixture for more power. Designed for 1500 to 6500 RPM street-driven power. Dual-plane high-rise intake with 180 degree firing order. Produces incredible top-end horsepower. Retains good throttle response and acceleration. Larger plenum and runners maximize other upgrades. Edelbrock total power package maximizes gains. Available in cast, polished or endurashine finish.

Product Features:

Based on Performer RPM-Series with Unique Air Gap
Air Gap Cooler and Denser Mixture for More Power
Designed for 1500 to 6500 RPM Street-Driven Power
Dual-Plane High-Rise Intake w/180 deg Firing Order
Produces Incredible Top-End Horsepower
Retains Good Throttle Response and Acceleration
Larger Plenum and Runners Maximizes Other Upgrades
Edelbrock Total Power Package Maximizes Gains

from

$645.99

Product Features:

The Holley GM LS1/LS2/LS6 2x4V dual-plane was designed in the tradition of the great dual Holley 4160 induction systems that competed on drag strips, in Trans-Am and at Lemans in the 1960’s.
The dual-plane equal-distribution layout produces great mid-range torque without compromising top end power.
Carbureted and EFI versions available
Power band from 1500-7000 rpm
Appropriate for any street/performance, muscle car, or street rod enthusiast
Cast aluminum construction
Intended for use on all GM LS Gen III engines equipped with LS1/LS2 style cathedral port cylinder heads
Carb Flange Center-To-Center: 8-5/8″

Upgrade your 2002 Chevrolet Corvette with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2002 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 77 Performance and Racing Products for the 2002 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Performance Air Filter replacements to Performance Ignition Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2002 Chevrolet Corvette at great prices. Our Performance and Racing Products inventory for this model ranges from just $5.99 to $1,870.00, with an average price of $382.20. Our 77 Performance and Racing Products in stock come from 19 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet Corvette, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Energy Suspension, B & M, and more. K&N Performance and Racing Products start at just $83.99 and boast an impressive 4.8 stars average rating from customers. Energy Suspension and B & M also bring quality to the table, with Performance and Racing Products available starting at $5.99, and at an average 4.4 stars rating. With 207 customer reviews and counting, our 2002 Chevrolet Corvette Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet Corvette!

Best-Selling Performance Air Filters for 2002 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 1 quality Performance Air Filter components, starting at $83.99.

show more show less

from

$83.99

REUSABLE K&N FILTER SAVES YOU MONEY: A K&N washable, reusable air filter will save you up to $125 vs. purchasing multiple disposable filters (compared to MSRP in USD of corresponding OE filters for 200,000 miles of highway driving)
CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (5 years based on the average miles driven per year of 15,000 miles)
RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
REDUCES WASTE: Over 200 million disposable air filters and their packaging waste wind up in landfills each year- reusable filters help reduce waste in our landfills
ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
EASY INSTALLATION: K&N Air Filters are pre-oiled and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
ULTIMATE LONGEVITY: No-hassle lifetime limited warranty on stock replacement K&N air filters- limitations apply

Most Popular 2002 Chevrolet Corvette Performance Ignition Products

Customize your Chevrolet with 4 Performance Ignition Products products like Performance Coils, Performance Spark Plug Wires, and Performance Ignition Systems, all priced under $323.99.

show more show less

from

$94.99

The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.

Product Features:

Helically Wound Conductor
Suppresses Electro And Radio Noise
Great Strength And Durability
Heavy Duty Terminals For Secure Connection
8mm Silicone/Synthetic Jacket Resists Heat
Improved Spark Delivery And Power
Silicone Boots Protect Against High Exhaust Temps

from

$323.99

Replacement crank trigger wheel for small block Chevy
Absolutely the most accurate way to trigger the ignition
The non-magnetic pickup cannot be false triggered
Powerful magnets are embedded in a billet aluminum trigger wheel

from

$152.99

These harnesses allow you to easily connect the 6LS or 6LS-2 to a factory EFI system to take advantage of timing adjustments and settings. Connects to the factory crank trigger and other sensors. Programmable via a PC through MSD’s Pro-Data software.

Product Features:

Adapt the MSD Timing and RPM Controller PN[6010] to an EFI system
Manage the ignition timing and program rpm limits.
Connects to the factory crank trigger and other sensors.
Programmable via a PC through MSDs Pro-Data+ software

from

$107.99

MSD Ignition multiple spark coils (MSC) will fit in place of the stock Gen-III GM coils and connect directly to the factory connectors. Once installed, you’ll have the power and performance of higher energy sparks, crowned with MSD’s multiple spark discharge. Increased spark energy and voltage, along with multiple spark capabilities, help improve the combustion process of the fuel mixture to create an efficient burn. This results in improved throttle response, smooth idle and quick starts, plus increased high RPM performance! The MSC delivers up to three times the current of the stock coils. Plus, the coils fire multiple times!

Product Features:

Produces multiple; powerful sparks
Two connectors molded into custom housing
Improved performance
Produces three times the spark current of stock
Complete kit with mounting hardware
Easy installation
CARB approved legal for use in all states
OBD II approved legal for use in all states

Top Picks for 2002 Chevrolet Corvette Performance Exhaust Products

Upgrade Chevrolet Corvettes with top-quality Performance Exhaust Products parts, including 3 OEM and aftermarket selections for your 2002 model.

show more show less

from

$1399.99

Durable corrosion-resistant stainless steel construction
CNC precision robotic manufacturing techniques
Dyno-proven performance

from

$491.99

LS Cast Iron Exhaust Manifold

from

$35.49

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:

Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
Slotted bolt holes allow for easier header installation.
Not intended for use in emission controlled vehicles.

In-Demand Performance Steering Products for 2002 Chevrolet Corvettes

Select from 7 premium Performance Steering Products parts for your 2002 Chevrolet Corvette, with prices ranging from $5.99 to $20.79.

show more show less

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$6.29

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$20.79

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$20.79

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

Most Sold 2002 Chevrolet Corvette Performance Engines

Explore our best-selling Chevrolet parts for the 2002 Corvette among 38 OEM and aftermarket options starting from $8.99.

show more show less

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26918-16 with this camshaft

from

$459.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$37.99

Opens sooner than stock at 160 degrees
High flow design for performance applications
Includes rubber o-ring seal/gasket
Incorporates pressure relief valve

from

$541.99

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:

HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
Use Dual Valve Spring part No. 26925-16 with this camshaft

from

$85.99

This 7° steel retainer for GM Gen III applications with #26915 or #26918 Beehive Valve Springs is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

Product Features:

7° angle retainers for 1.055″ diameter valve springs, stock diameter valve stems
O.D. – 1.030″, Step 1 – .640″
Precision machined from 4140 chromemoly steel and finished in black oxide
Designed for positive location when combined with COMP Cams high-quality valve springs

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1870.00

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1867.00

XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$921.99

The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:

Furnace Brazed Impeller
Steel Alloy Pump Drive Tube
Heavy Duty Needle Bearing
Between Stator and Turbine
Furnace Brazed Turbine

from

$868.99

ENGINE VALVE LIFTER

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$719.99

For GM LS series applications
includes Hi-Tech Pushrods, Beehive Valve Springs and Titanium Retainers
Replaces stock valve train components for more usable horsepower and higher rpm range

from

$645.99

Product Features:

The Holley GM LS1/LS2/LS6 2x4V dual-plane was designed in the tradition of the great dual Holley 4160 induction systems that competed on drag strips, in Trans-Am and at Lemans in the 1960’s.
The dual-plane equal-distribution layout produces great mid-range torque without compromising top end power.
Carbureted and EFI versions available
Power band from 1500-7000 rpm
Appropriate for any street/performance, muscle car, or street rod enthusiast
Cast aluminum construction
Intended for use on all GM LS Gen III engines equipped with LS1/LS2 style cathedral port cylinder heads
Carb Flange Center-To-Center: 8-5/8″

from

$551.99

Standard Impeller Rotation
0.750 in. Pilot Shaft
0.750 in. Ball/Ball Bearing
6.00 in. Block To Hub Height
Natural Finish

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:

Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
Provides outstanding low RPM torque with increased stability.

from

$541.99

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Product Features:

HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
Use Beehive Valve Spring part No. 26915-16 with this camshaft

7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs

from

$506.99

7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs

from

$483.99

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$339.99

CYL HEAD COMPONENTS

Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$286.99

Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$272.99

VALVE SPRINGRETAINER

Top-Rated Performance and Racing Products Brands For Your 2002 Chevrolet Corvette

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2002 Chevrolet Corvettes. Below you’ll find some of our best rated Performance and Racing Products from K&N, Energy Suspension, and B & M, and more. Performance and Racing Products from these brands that fit a 2002 Corvette start at just $5.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2002 Chevrolet Corvette Performance and Racing Products

When it comes to maintaining or upgrading your 2002 Chevrolet Corvette, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2002 Chevrolet Corvette. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $83.99. Plus, with over 89 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $83.99

(89)

Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance

“5 Star Review”

Popular Energy Suspension 2002 Chevrolet Corvette Performance and Racing Products

Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2002 Chevrolet Corvette owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 2002 Corvette, Advance Auto Parts carries a full inventory of 1 Energy Suspension Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range up to $5.99, plus, with more than 3 customer reviews and an impressive 4.4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $5.99

(3)

Tie Rod Dust Boot

“Replaced the old torn boot and added a bit of color for a low cost.”

FAQs for 2002 Chevrolet Corvette Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2002 Chevrolet Corvettes?

Out of 77 Performance and Racing Products that fit 2002 Chevrolet Corvettes, the following parts are the top sellers:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (11907375) – $456.99

What’s the price range for 2002 Chevrolet Corvette Performance and Racing Products?

Performance and Racing Product prices for the 2002 Chevrolet Corvette start at $5.99 and go up to $1,870.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2002 Chevrolet Corvette?

The average price for Performance and Racing Products for the 2002 Chevrolet Corvette is $382.20. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Corvette model years?

Yes, we currently carry Performance and Racing Products for 63 model years of Chevrolet Corvettes between 1953 and 2019. Performance and Racing Products are bought most frequently for the following model years: 2019, 2018, 2017, 2016, 2015, 2014, 2013, 2012, and 2011.

What are the cheapest Performance and Racing Products for my 2002 Chevrolet Corvette?

The cheapest 2002 Chevrolet Corvette Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $5.99
Tie Rod Dust Boot (17360833) – $5.99
Tie Rod Dust Boot (22906873) – $6.29
Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (50288908) – $8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (50288903) – $8.99

What are the top-rated Performance and Racing Products that fit the 2002 Chevrolet Corvette?

Out of 207 reviews by customers, our 2002 Chevrolet Corvette Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2002 Chevrolet Corvette and their top-rated products:

Performance Air Filters
- Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (17400188) – $83.99

What types of Performance and Racing Products do you sell for my 2002 Chevrolet Corvette?

As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2002 Chevrolet Corvette:

Can I get help with 2002 Chevrolet Corvette Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Corvette Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 Chevrolet Corvette Performance and Racing Products

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

Diablosport – Trinity 2 (Part No.9200)

Airaid – Performance Air Intake System (Part No.250-292)

Accel – GM 1984-95 Remote Supercoil (Part No.140011)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam/Lifter Kit (Part No.CL11-205-3)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)

Competition Cams – 11 Steel Retainer for Buick 350-455 with 1.225"-1.250" OD Valve Spring (Part No.712-1)

MagnaFlow – Street Series Axle-Back Performance Exhaust System (Part No.16732)

Hurst – Manual Short Shifter, Billet Plus (Part No.3915085)

Mr. Gasket – Advance And Retard Cam Bushings (Part No.85)

Mr. Gasket – Ultra Seal: Competition Screw-In Rocker Arm Studs (Part No.1074)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2305)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

B & M – Tork Master 2400 (Part No.70418)

Energy Suspension – Control Arm Bushing Set (Part No.3.3108G)

Energy Suspension – Control Arm Bushing Set (Part No.3.3177G)

Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5911)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Competition Cams – High Energy Hydraulic Flat Lifter Chevrolet SBC, BBC, and 194-292/200-262 V6. (Part No.812-1)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.11-234-3)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Richmond Gear – RngPnn (Part No.12BC355)

Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)

B & M – Flexplate, SFI 29.1 Approved, Fits 168-Tooth, 2-Piece Rear Main Seal, Chevy V8 (Part No.20230)

B & M – Flexplate (Part No.20238)

Edelbrock – RPM Air-Gap Big Block Chevy 2-R Intake Manifold (Part No.7562)

Holley – LS Carbureted Manifold – 2×4 Dual Plane GM LS1/LS2/LS6 (Part No.300-120)

K&N – Engine Air Filter: Washable & Reusable, Engineered to Increase Air Flow and Performance (Part No.33-2111)

MSD Ignition – Wire Set; Street Fire;GM LS1; LS6 (Part No.5572)

MSD Ignition – Trigger Wheel; Flying Magnet; Small Block Chevy (Part No.8611)

MSD Ignition – Adapter Cable; MSD PN 6010/PN 60101 to GM OEM Sensors (Part No.8886)

MSD Ignition – Coil, GM LS Series (LS-1, 6) (Part No.8245)

MagnaFlow – Street Series Axle-Back Performance Exhaust System (Part No.16732)

Hooker Headers – LS Cast Iron Exhaust Manifold (Part No.8501HKR)

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1438)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5197R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5200R)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5196G)

Energy Suspension – Sway Bar Bushing Set (Part No.3.5200G)

Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)

Competition Cams – Steel Retainers, 1.055" For Ls Beehive 1 St (Part No.774-16)

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)

Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)

Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)

Competition Cams – Ls Series Valve Train Upgrade Kit With Springs Retainers & Pushrods 1 Ea (Part No.54100)

Holley – LS Carbureted Manifold – 2×4 Dual Plane GM LS1/LS2/LS6 (Part No.300-120)

Edelbrock – Water Pump for GM LS Victor Pro (Clockwise Rotation) (Part No.8895)

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)

Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)

Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)

Competition Cams – 7 Titanium Retainer Set of 16 for GM LS with 26915/26918 Beehive Springs (Part No.772-16)

B & M – Tork Master 2400 (Part No.70418)

Edelbrock – CYL HEAD COMPONENTS (Part No.9708)

Competition Cams – Hi-Tech 7.425" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7796-16)

Competition Cams – VALVE SPRINGRETAINER (Part No.1754-16)