from

$12.79

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$42.49

Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:

Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
Cost-effective solution – offers original equipment quality at competitive price
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance

from

$69.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$64.99

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$310.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$397.99

Modular coolant hoses are on many of today’s vehicles and are much more complex than the standard molded hoses of the past. Modular coolant hoses are hose assemblies with one or more components built into the hose. Some examples of these components include hose branches, quick connectors, valves, sensors, bleeders and flow restrictors. Manufactured identical or equivalent to the OE hose, modular coolant hoses will keep your vehicle’s cooling system running properly and efficiently for years to come.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube: synthetic fiber knit reinforcement, heat-, ozone- and chemical coolant-resistant EPDM cover
Manufactured with OEM-exact hose components (quick connects, branch connectors/tees, sensors, etc.)
Meets SAE 20R3 EC Class D1 under 25mm (1 in.) ID, SAE 20R4 EC Class D1 for 25mm (1 in.) ID and over
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$32.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$41.99

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by one of the largest original equipment part suppliers in the world to ensure proper form, fit, and performance
Forged Heavy Duty Steel Pulley designed to displace bearing heat. Precision machined face for smooth running surface. Tandem 6303 Ball Bearings for extended life.
Installation instructions included.

from

$85.99

This Litens belt tensioner is supplied by the original equipment tensioner supplier to GM and meets all form, fit, and performance characteristics of the original equipment part (with the exception of not having the car manufacturer’s logo or part number applied to the part). The aftermarket part features a cast-in lift feature and belt stretch indicator. As with the Original Equipment part, this tensioner is manufactured in Canada to the same exacting specifications as the O.E. part. The pulley is heavy duty steel as specified by the manufacturer. 2 molded locator pins for precise installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by the original equipment part supplier to ensure proper form, fit and performance
Internal “round spring” technology to provide constant belt tension and alignment throughout its service life. The internal damping design provides quiet, smooth, system performance.
Installation instructions included.
Heavy Duty Steel Pulley
Professional Mechanics will change this tensioner in about 20 minutes.
Due to the fact that belts and tensioners have similar Original Equipment “design life targets”, it is often a best practice to replace the belt tensioner when replacing a worn or broken belt. Belt removal is required to change the tensioner. Therefore, d

from

$157.99

Product Features:

Optimized components engineered for maximum strength and durability
Patented design provides superior belt alignment and tension for improved drive efficiency and life
Patented labyrinth seal prevents contamination of internal parts for maximum durability and service life
Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
Double row bearings carry more load and last up to 3X longer than two individual bearings
Chrome-silicone round torsion spring for less +ex-fatigue than +at-spring designs
Patented damping mechanism provides maximum stability, reducing vibration and increasing the life of the belt, tensioner and other accessory drive components

from

$57.99

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
Premium OE technology to ensure peak performance under extreme conditions
Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
Meets or exceeds OE quality

from

$51.99

This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, specifications and meets performance and durability requirements. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Heavy Duty steel pulley with a long lasting automotive bearing
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$66.99

This Litens pulley is supplied by one of the largest original equipment suppliers in the world and meets all form, fit, and performance characteristics of the original equipment part . Like the G.M. Original Equipment pulley, the Litens replacement part is constructed of heavy duty steel for long life and trouble free performance. This pulley is supplied with a new integrated bolt/dust shield to facilitate installation. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket._

Product Features:

Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys
Heavy Duty Steel Pulley
Pre-assembled pulleys save installation time and ensure that all components are assembled to original specifications for both installation and performance
Precision steel stamping with close tolerance ball bearing pocket.
Electro-deposited coating (e-coat) for superior corrosion resistance.
Running surface designed and engineered for proper belt tracking.

from

$35.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads
Made in the USA

from

$72.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$89.99

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
EPDM rubber constructions resist cracking on the rib surface
Meets or exceeds all specifications from the Original Equipment Manufacturer
Tensioner Replacement is Recommended (if equipped)
Unique form grinding of each individual belt assures precise dimensional control.
Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

from

$38.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$37.99

Designed for the toughest applications, FleetRunner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. FleetRunner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
Special compound provides unmatched stability, load carrying capacity and belt life
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for troubled drives
Engineered to save your fleet money and reduce downtime
Meets RMA oil and heat resistant standards and static conductivity requirements

from

$18.29

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
Provides greater durability and flexibility – 35% stronger than all previous versions
Features specially treated cords for added strength, stability and reliability
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$6.49

Heavy-duty construction assures dependable operation in truck, bus and off-road equipment heater systems. For a maintenance free connection, install with Power-Grip SB clamps. Approved for marine applications.

Product Features:

Green Stripe construction provides best cost-per-mile economics
Abrasion-resistant cover
Engineered with materials to resist electrochemical degradation
Reduces water loss from water permeating the hose wall and cover
Exceeds SAE 20R1 Type EC (Class D-1 tube and cover Standard Wall)
Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
Note: For a maintenance free connection, use PowerGrip SB clamps
Caution: Do not use for fuel or oil transfer applications
PLEASE NOTE: Item is priced and sold by the foot. See store for details.

from

$58.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$213.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$76.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$93.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and to ensure perfectly sealed conditions
EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$44.99

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under ha

Product Features:

Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
Premium OE technology to ensure peak performance under extreme conditions
Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
Meets or exceeds OE quality

2002 Chevrolet C7500 Kodiak Belts and Hoses

More 2002 Chevrolet C7500 Kodiak Belts and Hoses Categories

Essential 2002 Chevrolet C7500 Kodiak Belts and Hoses

Dorman – Heater Hose Connector (Part No.800-401)

Dorman – Heater Hose Connector (sold by each) (Part No.800-401.5)

Gates – Premium Molded Coolant Hose (Part No.22031)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27" Long, 2" Diameter (Part No.E71566)

Gates – Premium Modular Coolant Hose (Part No.22768)

Gates – Premium Modular Coolant Hose (Part No.22771)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38006)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 74 mm Diameter (Part No.900120A)

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999122A)

Gates – FleetRunner½ Heavy-Duty Automatic Belt Drive Tensioner (Part No.38509)

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 86.5mm Dia., 39.4mm Width, Smooth (Part No.89106)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter (Part No.900045A)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 90 mm Diameter (Part No.900401A)

Dayco – Poly Rib Belt Serpentine Belt; 74.41 Long, 4 Rib Count (Part No.5040745)

Gates – V-Ribbed Serpentine Belt: 73.795" Long, 7 Rib Count, Exact Fit (Part No.K070733)

Gates – V-Ribbed Serpentine Belt: 79.183" Long, 7 Rib Count, Exact Fit (Part No.K070786)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9335HD)

Gates – FleetRunner« Heavy-Duty V-Belt (Part No.9341HD)

Dayco – Double Cog V-Belt; 46.25 Inch Long, Exact Fit Premium Quality (Part No.22463)

Gates – Green Stripe« Heavy-Duty Straight Heater Hose (Part No.28442)

Gates – Molded Heater Hose: EPDM, Direct Fit, 1.75" Inside Diameter (Part No.23099)

Gates – Premium Molded Coolant Hose (Part No.22135)

Gates – Premium Molded Coolant Hose (Part No.22663)

Gates – Premium Molded Coolant Hose (Part No.22765)

Dayco No Slack Gold Label – Serpentine Idler/Tensioner Pulley; Steel, 74mm Dia., 39.25mm Width, Smooth (Part No.89101)

Popular 2002 Chevrolet C7500 Kodiak Belts and Hoses Categories

2002 Chevrolet C7500 Kodiak Belts and Hoses

Top-Rated Belts and Hoses Brands For Your 2002 Chevrolet C7500 Kodiak

Popular Dorman Belts and Hoses

Top-Rated Litens Belts and Hoses

FAQs for 2002 Chevrolet C7500 Kodiak Belts and Hoses

What are the most purchased Belts and Hoses for the 2002 Chevrolet C7500 Kodiak?

What are the top-rated 2002 Chevrolet C7500 Kodiak Belts and Hoses?

More Popular Parts for All Makes