2002 Chevrolet C3500HD Engine Parts

Below you will find various in-demand Chevrolet Engine Parts, components and accessories for your 2002 C3500HD. Advance Auto Parts has popular C3500HD parts like Camshafts, Engine Gaskets and Seals, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other C3500HD model years including 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 and more. Select a category of 2002 Chevrolet C3500HD Engine Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 2002 Chevrolet C3500HD Engine Parts Categories

Engine Valve Lifters

Valve Cover Gaskets

Turbochargers and Parts

Oil Pumps

Oil Pan Gaskets

Rear Main Seal Sets

Turbocharger Boost Sensors

Crankshaft Position Sensors

Harmonic Balancers

Timing Cover Gasket Sets

Cylinder Head Gasket Sets

Cylinder Head Gaskets

Oil Cooler Line Connectors

Turbocharger Oil Line Gaskets

Camshaft Position Sensor Connectors

Engine Oil Pump Pickup Tube and Screens

O-Rings

Oil Pump Shafts

Timing Cover Seals

Engine Valve Stem Seals

Oversized Main Bearings

Camshaft Bearings

Standard Rod Bearing Sets

Standard Piston Rings

Lower Gasket Sets

Turbocharger Coolant Lines

Timing Chains

Standard Individual Rod Bearings

Oil Pump Nylon Shaft Guides

Camshaft Plugs

Timing Crank Gears

Expansion Plugs

Engine Variable Timing Solenoid Connectors

Camshaft Followers

Fuel Pump Gaskets

Turbocharger Mounting Gaskets

Engine Valve Locks

Remanufactured Engines

Cylinder Heads

Piston Pin Bushing Sets

Turbocharger Support Mounting Gasket

Engine Assembly Lube

Turbocharger Boost Sensor Connectors

Engine Oil Pump Guide Bushings

Essential Engine Parts for 2002 Chevrolet C3500HDs

from

$41.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$9.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$56.99

Billet Crankshaft Sprocket Has Three Keyways for +/- 4 Degrees Adjustability. Crankshaft Sprocket Heat Treated for Durability. Seamless True Roller 0.250″ Roller Diameter Chain for Reduced Friction. 100% USA Made.

Product Features:

The complete kits, which meet or exceed OEM performance requirements, ensure a quiet and maintenance-free experience
Cloyes parts are CAD designed and manufactured using premium materials. Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Cloyes Timing Kits may include camshaft sprockets, crankshaft sprockets, timing chains, tensioners, and guides
Refer to our online catalog for detailed application-specific information
Keep your engine’s valve train in perfect time with Cloyes, the world leader in timing drive systems.

from

$8.79

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$21.99

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

Manufactured from high quality materials for consistent durable wear
Precision engineered for optimum fit and function
Designed for long-life and worry-free performance
Meets or exceeds original equipment specifications

from

$9.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$6.99

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$32.99

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$35.99

Anchor 2621 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2002
Weight approx: 4 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2621, 2621

from

$5.29

This engine oil pump bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine oil pump bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$28.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$72.99

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$119.99

This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$10.99

This engine oil cooler line connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this engine oil cooler line connector matches the appearance and function of the factory hardware on specified applications
Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$98.99

ACDelco GM Original Equipment Engine Crankshaft Position Sensors monitor the position and rotational speed of the crankshaft, and are GM-recommended replacements for your vehicle’s original components. The signal from the crankshaft position sensor is used by the engine control module to determine fuel injection and ignition timing. These original equipment engine crankshaft position sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

This part requires programming and/or special setup procedures. GM Service Information describes the procedures and special tools needed to ensure proper operation in the vehicle
Helps keep engine timing and fuel injection running in sync
Helps provide proper alignment, positioning, and spacing for easy installation
Synchronizes engine valves and pistons for excellent engine performance
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$27.49

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
Excellent high temperature capabilities
Compatible with wide range of fluids
Delivers quality and reliable performance for every type of repair

from

$49.99

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$0.30

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$845.99

Engineered with precision, Rotomaster New Turbochargers stand apart in the aftermarket industry. Designed for today¿s demanding engines, each unit is 100% new and undergoes rigorous triple balancing and quality validation to meet or exceed original equipment performance. Drive with confidence knowing quality and dependability come standard with every turbocharger.As experts in turbochargers, Rotomaster offers best-in-class knowledge and support. Their on-call technical support team is ready to help with installation, troubleshooting, and diagnostics so you can stay up and running with confidence.Backed by an industry-leading warranty, Rotomaster turbochargers deliver confidence and coverage you can count on.

Product Features:

Precision Dynamic Balancing: Compressor wheels, turbine shafts, and rotating assemblies are 100% dynamically balanced. Delivers smoother operation and longer turbo life.
All-New Construction: Built entirely from new components, with no remanufactured parts. Ensures consistent, trouble-free performance.
OE-Matching Fit and Performance: Engineered to meet or exceed original equipment standards. Guarantees a direct replacement that installs easily and performs like the factory unit, no guesswork required
Pre-Lubed for Protection: Includes a pre-lube syringe to prep the turbo before first startup. Minimizes installation risk by preventing dry starts, giving you peace of mind.
Complete Installation Kit: Comes with essential gaskets and mounting hardware. Saves time and ensures a smooth install with no last-minute parts runs.
100% dynamic balancing of compressor wheels, turbine shaft/wheel assemblies and complete rotating assembly guarantees proper operation and extends unit life.
All units come with the required gaskets and mounting hardware for easy installation.
Meets or exceeds O.E. performance.
Comes with a pre-lube syringe to ensure product protection during installation.

from

$169.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$60.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$99.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Reduces dramatically or eliminates bearing wear
Exacting tolerances
Meets or exceeds OEM specifications
Made with silicon to provide greater surface hardness

from

$143.99

Face of top rings coated with latest generation Plasma-Moly
Decreases friction
Very resistant to scuffing
Exacting tolerances
Meets or exceeds OEM specifications

from

$50.99

The engine lubrication system is critical to engine operation and long life. On some vehicle applications, the engine control module monitors the engine oil level to ensure lubrication is not lost.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$2.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$20.99

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$32.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Validated for fit, form, and function
Engineered for the sealing repair environment
Unsurpassed quality you can trust

from

$55.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Upgrade your 2002 Chevrolet C3500HD with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2002 Chevrolet C3500HD, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Engine Parts are key to keeping your C3500HD functioning at its best. At Advance Auto Parts, we offer a wide selection of 116 Engine Parts for the 2002 Chevrolet C3500HD, designed to meet your needs without breaking the bank. From Camshaft replacements to Engine Gaskets and Seals upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2002 Chevrolet C3500HD at great prices. Our Engine Parts inventory for this model ranges from just $0.30 to $4,187.99, with an average price of $164.96. Our 116 Engine Parts in stock come from 19 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet C3500HD without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet C3500HD, we stock popular OEM and aftermarket Engine Parts from top names like Felpro, Melling, Sealed Power, and more. Felpro Engine Parts start at just $2.49 and boast an impressive 4.6 stars average rating from customers. Melling and Sealed Power also bring quality to the table, with Engine Parts available starting at $0.43, and at an average 4.3 stars rating. With 187 customer reviews and counting, our 2002 Chevrolet C3500HD Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet C3500HD is always ready to roll. We’re committed to providing you with everything you need to keep your C3500HD in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet C3500HD!

Best-Selling Camshafts for 2002 Chevrolet C3500HDs

Enhance the driving experience in your Chevrolet with 6 quality Camshaft components, starting at $2.99.

show more show less

from

$24.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$14.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$49.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$41.99

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$57.99

Steel-backed Babbitt lining material
Used in automotive and high-performance
Babbitt is designed to perform under extreme loads w/o damaging other engine parts
Babbitt is more environmentally friendly than other material
ISO & QS certified manufacturing

from

$2.99

This engine camshaft plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine camshaft plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Most Popular 2002 Chevrolet C3500HD Engine Gaskets and Seals

Customize your Chevrolet with 14 Engine Gaskets and Seals products like Valve Cover Gaskets, Oil Pan Gaskets, and Timing Cover Gasket Sets, all priced under $489.99.

show more show less

from

$2.49

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$16.99

Specialized gasket set called R.A.C.E. or Remainder to Assemble Complete Engine
Includes rear main seal, timing cover gasket and seals and fuel pump gaskets
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$22.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$15.49

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE – Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$30.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$40.99

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$40.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$63.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Conversion Sets (CS) provide every gasket for lower engine work – add a Head Set (HS) for complete engine overhaul work
Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$181.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$59.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$489.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$469.99

Each 260 gasket set includes Fel-Pro gaskets (Number 1 brand of gaskets)
Provides the exact gaskets the application requires.
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$139.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$2.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

Top Picks for 2002 Chevrolet C3500HD Engine Mounts

Upgrade Chevrolet C3500HDs with top-quality Engine Mounts parts, including 1 OEM and aftermarket selections for your 2002 model.

show more show less

from

$35.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1987-2002
Weight approx: 4 Lbs
Product: Made In The Usa
Design: Clamshell
Part Group: 2621, 2621

In-Demand Engine Timing Parts for 2002 Chevrolet C3500HDs

Select from 12 premium Engine Timing Parts parts for your 2002 Chevrolet C3500HD, with prices ranging from $15.99 to $187.99.

show more show less

from

$15.99

Design type: spring loaded; single-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$116.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S524 Engine Timing Camshaft Sprocket (1 EA), S807 Engine Timing Crankshaft Sprocket (1 EA), C181 Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$61.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$23.79

Design type: spring loaded; single-lip
Temperature range: -100 Deg. F to 450 Deg. F / -73 Deg. C to 232 Deg.
Excellent dry running capabilities
Low coefficient of friction
Delivers quality and reliable performance for every type of repair

from

$187.99

ENGINE TIMING SET

from

$74.99

Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

Product Features:

Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Engineered and manufactured with precision pitch control for proper chain-to-sprocket tooth fitment
CAD designed and manufactured using premium materials
Refer to our online catalog for detailed application-specific information
Pre-Stressed And Heat-Treated For Increased Durability. Precision Cut Plates And Rollers With Smooth Finish. Precision Pitch Control For Proper Chain To Sprocket Tooth Fit.

from

$72.99

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$58.99

Sprockets Are Made From High Alloy Steel, and Heat-Treated For Durability. Chain Is Pre-Stressed and Heat-Treated For Longevity. SET INCLUDES: S842T Engine Timing Camshaft Sprocket (1 EA), S837 Engine Timing Crankshaft Sprocket (1 EA), 9-4185 Engine Timing Chain (1 EA).

Product Features:

Utilizes the latest in design and technology to offer complete chain sets
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Utilizes the latest in design and technology to offer complete chain sets
Refer to our online catalog for detailed application-specific information

from

$42.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$37.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$32.99

Sprocket Made From High Alloy Material. Sprocket Teeth Are Heat Treated. Precision Tooth Form To Assure Proper Chain Engagement, And Precise Keyway To Tooth Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

from

$28.99

Sprocket Made From High Alloy Material. Features Precision Tooth Form To Assure Proper Chain Engagement, And Is Balanced For Proper Timing.

Product Features:

Featuring precision-tooled or machined tooth form and precision-machined bore for true fit, timing chain sprockets offer reliability and dependability for engine rebuilds and typical replacement jobs
Recommended that the chain tensioner(s), sprocket(s), and guide(s) also be replaced when the chain is replaced, as these components play a vital role in system stability and accurate timing
CAD designed and manufactured using premium materials
Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
Refer to our online catalog for detailed application-specific information

Most Sold 2002 Chevrolet C3500HD Valve Cover and Cylinder Heads

Explore our best-selling Chevrolet parts for the 2002 C3500HD among 12 OEM and aftermarket options starting from $0.30.

show more show less

from

$0.43

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$21.99

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$34.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Requires no retorquing of the head bolts

from

$0.30

Unsurpassed quality that you can trust
Uses leading edge materials
State-of-the-art manufacturing
Exacting tolerances
Meets or exceeds OEM specifications

from

$202.99

PROPRIETARY COATING – Nonstick anti-friction coating seals small surface scratches and imperfections
SEALING TECHNOLOGIES – Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$32.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

PermaTorque head gaskets meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit

from

$945.99

Remanufactured Cylinder Heads are complete rebuild & include new valve stem seals, soft plugs & verified camshafts. All threads are checked and repaired if necessary. Cylinder Heads are packaged in heavy plastic to protect the unit.

Product Features:

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$619.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$619.99

All cylinder heads are both vacuum and pressure tested to verify valve seating, & integrity of water passages.
All cylinder heads are packaged in environmentally safe and recyclable containers that are the perfect size for returning your original core
All threads and machined surfaces are and repaired with technology that exceeds the original metal
Non-sealing iron surfaces painted to prevent oxidization

from

$282.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

OE-Style Hydraulic Roller Lifter for '96+ Chevrolet GEN VI Big Block and 8.1L

from

$36.99

OE-Style Hydraulic Roller Lifter for ’96+ Chevrolet GEN VI Big Block and 8.1L

from

$8.79

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

Top-Rated Engine Parts Brands For Your 2002 Chevrolet C3500HD

Shop for the best-rated brands offering Engine Parts and other products for your 2002 Chevrolet C3500HDs. Below you’ll find some of our best rated Engine Parts from Felpro, Melling, and Sealed Power, and more. Engine Parts from these brands that fit a 2002 C3500HD start at just $0.43 and are rated as high as 4.6 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Felpro 2002 Chevrolet C3500HD Engine Parts

When it comes to maintaining or upgrading your 2002 Chevrolet C3500HD, using quality Engine Parts is essential to ensure durability and a perfect fit. Felpro ticks all of those boxes. We offer a wide selection of Felpro Engine Parts, specifically designed for the 2002 Chevrolet C3500HD. With over 3 Felpro brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $2.49, with an average price of just $6.99. Plus, with over 137 customer reviews and an average rating of 4.6 stars, you can trust that our Felpro Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $8.49

(109)

Fuel Injector O-Ring Kit

“Good parts”

from $9.99

(14)

Fuel Injector O-Ring Kit

“I rebuilt my engine using a off-brand gasket kit. The O-rings that came with the kit did not fit right. I bought these from Advance. They were Felp”

from $2.49

(14)

Fuel Pump Mounting Gasket

“Felpro is the best”

Popular Melling 2002 Chevrolet C3500HD Engine Parts

Melling auto parts is one of the highest quality Engine Part brands in the market. Any 2002 Chevrolet C3500HD owner should feel confident when installing genuine Melling parts in their vehicle. To ensure the best fit and performance for your 2002 C3500HD, Advance Auto Parts carries a full inventory of 3 Melling Engine Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Melling Engine Parts range from $3.29 to $75.99, plus, with more than 8 customer reviews and an impressive 4.3 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from $23.99

(1)

Stock Replacement Type Oil Pump Intermediate Shaft

“It is a good product at a price that cannot be beaten.”

from $75.99

(2)

Stock Replacement OE Type High Volume Oil Pump

“Fits great works great bbc 454”

from $3.29

(5)

Stock Replacement Oil Pump Shaft Guide

“This is what I needed. The only one around in New York that I could find…….”

FAQs for 2002 Chevrolet C3500HD Engine Parts

Which Engine Parts are best-sellers for 2002 Chevrolet C3500HDs?

Out of 116 Engine Parts that fit 2002 Chevrolet C3500HDs, the following parts are the top sellers:

Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (18481430) – $11.99
Engine Valve Lifter (3690024) – $21.99
Harmonic Balancer Pulley (11206028) – $52.99

What’s the price range for 2002 Chevrolet C3500HD Engine Parts?

Engine Part prices for the 2002 Chevrolet C3500HD start at $0.30 and go up to $4,187.99 for the most premium parts.

What’s the average price of a Engine Part for a 2002 Chevrolet C3500HD?

The average price for Engine Parts for the 2002 Chevrolet C3500HD is $164.96. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Chevrolet C3500HD model years?

Yes, we currently carry Engine Parts for 10 model years of Chevrolet C3500HDs between 1991 and 2001. Engine Parts are bought most frequently for the following model years: 2001, 2000, 1999, 1998, 1997, 1996, 1995, 1994, and 1993.

What are the cheapest Engine Parts for my 2002 Chevrolet C3500HD?

The cheapest 2002 Chevrolet C3500HD Engine Parts we carry in stock are:

Engine Valve Spring Retainer Keeper (19694177) – $0.30
Engine Valve Spring Retainer Keeper (19694179) – $0.43
Steel Cup Expansion Plug 41.5mm, Height 0.536 (Sold by each) (16140156) – $1.79
Fuel Pump Mounting Gasket (5183812) – $2.49
Steel Cup Expansion Plug 2-7/31 In. SC, Height 0.260 (sold by each) (22140441) – $2.99

What are the top-rated Engine Parts that fit the 2002 Chevrolet C3500HD?

Out of 187 reviews by customers, our 2002 Chevrolet C3500HD Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2002 Chevrolet C3500HD and their top-rated products:

Engine Gaskets and Seals
- Fuel Pump Mounting Gasket (5183812) – $2.49
- Engine Valve Stem Oil Seal Set (5183111) – $16.99
Valve Cover and Cylinder Heads
- Fuel Pump Mounting Gasket (5183812) – $2.49
- Engine Valve Stem Oil Seal Set (5183111) – $16.99

What types of Engine Parts do you sell for my 2002 Chevrolet C3500HD?

As of 3/1/26, these are some of the most in-demand types of Engine Parts for a 2002 Chevrolet C3500HD:

Can I get help with 2002 Chevrolet C3500HD Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Engine Parts and more.

What is your return policy for Chevrolet C3500HD Engine Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet C3500HD Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2002 Chevrolet C3500HD Engine Parts

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

Felpro – Turbocharger Mounting Gasket (Part No.61717)

Cloyes Performance – Engine Timing Set (Part No.9-1147)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 73104)

Melling – Stock Replacement Type Oil Pump Intermediate Shaft (Part No.IS-55E)

Felpro – Fuel Injector O-Ring Kit (Part No.ES 71190)

Carquest Premium – Engine Oil Filler Cap: Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10066)

Felpro – Engine Crankshaft Seal Kit (Part No.BS 40626)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2621)

Dorman – Help – Oil Pump Bushing (Part No.90460)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S524)

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)

Dorman – Engine Oil Pan: Direct Fit, Steel, Sump (Part No.264-138)

Dorman – Oil Cooler Line Connector (Part No.800-705)

GM Genuine Parts – Engine Crankshaft Position Sensor (Part No.213-3208)

National – Engine Crankshaft Seal (Part No.325776)

Sealed Power – Engine Camshaft Bearing Set (Part No.1404M)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)

Rotomaster – Rotomaster (Part No.J1650104N)

PowerBond – Race Performance Harmonic Balancer; 202mm Diameter (Part No.PB1046SS)

Felpro – Engine Conversion Gasket Set (Part No.CS 8180-2)

Sealed Power – Engine Crankshaft Main Bearing Set (Part No.4663MA 20)

Sealed Power – Engine Piston Ring Set (Part No.E-942K 30)

Carquest Premium – Engine Oil Level Sensor (Part No.SBC3719)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Felpro – TIMING COVER GASKET SET (Part No.TCS 45121)

Felpro – Turbocharger Mounting Gasket Set (Part No.ES 73125)

Felpro – Engine Cylinder Head Gasket Set (Head Gasket Sold Separately) (Part No.HSU 8726-1)

Sealed Power – Engine Valve Lifter (Part No.HT-2279)

Carquest Premium – Multi-Use Connector (Part No.ABA3461)

Sealed Power – Engine Camshaft Bearing Set (Part No.1404M)

Carquest Premium – Multi-Use Connector (Part No.PTA1205)

Sealed Power – Engine Camshaft Bearing Set (Part No.1496M)

Dorman – Steel Cup Expansion Plug 2-7/31 In. SC, Height 0.260 (sold by each) (Part No.555-081)

Felpro – Fuel Pump Mounting Gasket (Part No.5182)

Felpro – Engine Valve Stem Oil Seal Set (Part No.SS 5112)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50228 C)

Felpro – Engine Oil Pan Gasket Set – High-temperature Rubber-coated fiber (Part No.OS 34406)

Felpro – Engine Valve Cover Gasket Set (Part No.VS 50554 R)

Felpro – Engine Oil Pan Gasket Set – PermaDry molded rubber (Part No.OS 30714 R)

Felpro – Engine Timing Cover Gasket Set (Part No.TCS 46007)

Felpro – Engine Conversion Gasket Set (Part No.CS 8726-2)

Felpro – Engine Gasket Set (Part No.260-1773)

National – Shaft Repair Sleeve (Part No.99435)

Felpro – Engine Gasket Set (Part No.260-3154)

Sealed Power – Engine Gasket Set (Part No.260-3154)

Felpro – Engine Gasket Set (Part No.260-1772)

Victor Reinz – Fuel Pump Mounting Gasket (Part No.71-13599-00)

Anchor – Engine Mount: Front Left, Front Right, 1 Piece (Part No.2621)

National – Multi-Purpose Seal (Part No.3945)

Cloyes Gear – Engine Timing Set (Part No.C-3097)

Cloyes Gear – Engine Timing Chain (Part No.C181)

National – Engine Crankshaft Seal (Part No.710607)

INA US – ENGINE TIMING SET (Part No.ZC-C-3097)

Cloyes Gear – Engine Timing Chain (Part No.9-4185)

ACDelco – Gray Multi-Purpose Pigtail (Part No.PT2655)

Cloyes Gear – Engine Timing Set (Part No.C-3219)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S807)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S842T)

Cloyes Gear – Engine Timing Crankshaft Sprocket (Part No.S837)

Cloyes Gear – Engine Timing Camshaft Sprocket (Part No.S524)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-115)

Sealed Power – Engine Valve Lifter (Part No.HT-2104)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26169 PT)

Sealed Power – Engine Valve Spring Retainer Keeper (Part No.VK-138)

Felpro – PermaTorque Engine Cylinder Head Gasket Set (Part No.HS 26168 PT)

Felpro – PermaTorque Engine Cylinder Head Gasket (Part No.26168 PT)

Spartan – Engine Cylinder Head; Chevrolet 6.5 92-00 Cyl Head (Part No.2CE2)

Spartan – Engine Cylinder Head; Chevrolet 8.1/496 01-06 Left Head (Part No.2CW2L)

Spartan – Engine Cylinder Head; Chevrolet 8.1/496 01-06 Right Head (Part No.2CW2R)

Victor Reinz – Engine Cylinder Head Gasket Set (Part No.02-10445-01)

Competition Cams – OE-Style Hydraulic Roller Lifter for ’96+ Chevrolet GEN VI Big Block and 8.1L (Part No.900-1)

Felpro – Engine Valve Cover Grommet Set (Part No.ES 73104)