2002 Chevrolet Avalanche 1500 Performance and Racing Products

Please Select your Vehicle to See Exact Fit Parts

Essential Performance and Racing Products for 2002 Chevrolet Avalanche 1500s

Energy Suspension – Control Arm Bushing Set (Part No.3.3190R)

Control Arm Bushing Set

from

$131.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Spectre – Spectre Replacement Air Filter (Part No.HPR8755)

Spectre Replacement Air Filter

from

$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.

Product Features:
  • HPR OE Replacement Air Filter
  • High flow replacement filter designed to fit perfectly in your stock air box
  • Engineered for increased flow and greater performance
  • Fits multiple Chevy and GM truck applications
  • Factory pre-oiled and ready to use
  • Easy to install with no special tools or skills required
See More

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Ls1 Late Thermostat

from

$37.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:
  • Opens sooner than stock at 160 degrees
  • High flow design for performance applications
  • Includes rubber o-ring seal/gasket
  • Incorporates pressure relief valve
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.G885456)

Performance Differential Ring and Pinion

from

$399.99


Product Features:
  • GM 10BL 8.5 R/P 4.56 FRT/REAR MGP
See More

B & M – Automatic Shifter, StarShifter (Part No.80675)

Automatic Shifter, StarShifter

from

$349.99
Features include NHRA/ IHRA reverse lockout, backup light switch, neutral safety switch, polished T-handle. Cable operated for quick installation and accurate shifting. For 2 and 3 speed applications.

Product Features:
  • Base Trims For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
  • NHRA/IHRA Reverse Lockout Meets Requirements
  • Includes Neutral Safety Switch
  • Polished Aluminum. T-Handle and Cable
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10092)

Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow

from

$376.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 77% cfm Flow Gain
  • Improved Throttle Response
See More

B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)

Shift Improver Kit For 93-02 4L60E

from

$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.

Product Features:
  • Provides Crisp Shifts
  • On Any Stock Automatic Transmission
  • Eliminates Soft/Sluggish Shift
  • Eliminates Shift Overlap
  • Eliminate Clutch and Band Wear
  • Improves Transmission Life
  • Transmission Removal Not Required
See More

Energy Suspension – CntrlArmBshngKt (Part No.3.3194R)

CntrlArmBshngKt

from

$191.99
CntrlArmBshngKt

Energy Suspension – BodyMntBshKt (Part No.3.4156G)

BodyMntBshKt

from

$369.99
BodyMntBshKt

Bully Dog – 50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics (Part No.40410)

50-State Gas Tuner: Boost Performance, Fuel Economy, & Diagnostics

from

$469.99
The GT Platinum Gas is four products in one; a vehicle engine tuner, monitor, gauge and diagnostic device all in a single unit. The GT dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy and providing a comprehensive set of monitoring features and diagnostic functions. This product is incomparable to other tuning products because it has the largest feature set and the widest range of vehicle applications from a single product part number.

Product Features:
  • HEADS UP DISPLAY – Monitor over 15 performance parameters at a glance with a dynamic LCD display mounted on a pillar, window, or dash. User set daytime and nighttime driving modes
  • MULTIPLE PRELOADED TUNES – Access four preloaded tunes with the touch of a few buttons to maximize performance in any situation.
  • CODE CLEARING – Diagnose and clear trouble codes to ensure proper engine operation.
  • Reads and Erases Diagnostic Trouble Codes
  • Display Over 15 Vehicle Parameters
  • Installation Is Easy-10-20 Minutes
  • Free Internet Updates And Upgrades
  • 30 Day Money Back Guarantee
See More

Diablosport – Trinity 2 (Part No.9200)

Trinity 2

from

$666.99
Trinity 2

Energy Suspension – Transmission Mount (Part No.3.1129G)

Transmission Mount

from

$97.99
A true performance application component for cars, trucks, hot rods, racing/competition, yet popularly used for street vehicles when more horsepower is added. Soft running enough to absorb vibrations for street use yet rugged for racing use. Helps control torque on high performance vehicles. Maintains proper drive shaft angle to help prevent early wear and unexpected power train damage. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal transmission mounts. Resistant to under vehicle fluid oils, coolants and road contaminants. Made of Energy’s Hyper-Flex performance polyurethane and heavy duty hardware – for added durability.

Product Features:
  • Unique Safety Interlock Design
  • Impervious to Vehicle Oils and Chemicals
  • Strong Enough Too Handle High Performance
See More

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)

XFI RPM 216/220 Hydraulic Roller Cam

from

$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Product Features:
  • HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
  • 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
  • Use Beehive Valve Spring part No. 26915-16 with this camshaft
See More

Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)

XFI XE-R 224/230 Hydraulic Roller Cam

from

$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

Product Features:
  • HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
  • 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
  • Use Beehive Valve Spring part No. 26918-16 with this camshaft
See More

K&N – Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter (Part No.77-3050KP)

Cold Air Intake: Adds Up To 8 Horsepower, With Washable Air Filter

from

$472.99
Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:
  • Guaranteed to increase horsepower and torque.
  • Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
  • Engineered to provide high airflow and exceptional filtration.
  • Replaces factory air filter and intake tube.
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
  • Typical installation can be completed in 60 minutes or less with simple hand tools.
  • No-Hassle Lifetime Limited Warranty.
  • Will not void vehicle warranty(limited)
See More

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.57-3033)

Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:
  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 60 minutes or less with simple hand tools
  • No-Hassle Lifetime Limited Warranty
  • Will not void vehicle warranty(limited)
See More

Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953047)

Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

from

$152.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.853072)

70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound

from

$255.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Recommended for SUV/trucks/motorhomes/tow vehicles
  • Improved horsepower, torque and potential mileage improvement
  • Race proven patented Delta Flow technology
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)

Thermocap Radiator Cap

from

$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.

Product Features:
  • Indicates Coolant Temperature
  • Helps to Prevent Injuries from coolant or steam burns
  • Integrated Coolant Reclamation Valve
  • Improves Underhood Appearance
  • Fahrenheit and centigrade readings
  • Various valve pressures available
See More

B & M – Tork Master 2400 (Part No.70418)

Tork Master 2400

from

$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Tork Master 2000: Value-Priced Street Performance Torque Converter

from

$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Upgrade your 2002 Chevrolet Avalanche 1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2002 Chevrolet Avalanche 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Avalanche 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 61 Performance and Racing Products for the 2002 Chevrolet Avalanche 1500, designed to meet your needs without breaking the bank. From Performance Air Intake Kit replacements to Performance Steering Products upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2002 Chevrolet Avalanche 1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $8.99 to $1,870.00, with an average price of $444.69. Our 61 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 2002 Chevrolet Avalanche 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2002 Chevrolet Avalanche 1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Spectre, B & M, and more. K&N Performance and Racing Products start at just $367.99 and boast an impressive 4.8 stars average rating from customers. Spectre and B & M also bring quality to the table, with Performance and Racing Products available starting at $42.49, and at an average 4.2 stars rating. With 379 customer reviews and counting, our 2002 Chevrolet Avalanche 1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2002 Chevrolet Avalanche 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Avalanche 1500 in top shape, all in one place. Start shopping confidently below for your 2002 Chevrolet Avalanche 1500!

Best-Selling Performance Air Intake Kits for 2002 Chevrolet Avalanche 1500s

Enhance the driving experience in your Chevrolet with 7 quality Performance Air Intake Kit components, starting at $207.99.

Spectre – Spectre Air Intake Kit (Part No.9900B)

Spectre Air Intake Kit

from

$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a blue Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • Will not void vehicle warranty(limited)
See More

K&N – Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter (Part No.57-3033)

Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter

from

$367.99
A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:
  • Guaranteed to increase horsepower and torque
  • Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
  • Engineered to provide high airflow and exceptional filtration
  • Replaces factory air filter and intake tube
  • Filter only requires cleaning every 100,000 miles under normal highway driving conditions
  • Typical installation can be completed in 60 minutes or less with simple hand tools
  • No-Hassle Lifetime Limited Warranty
  • Will not void vehicle warranty(limited)
See More

Spectre – Spectre Air Intake Kit (Part No.9900)

Spectre Air Intake Kit

from

$208.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing, and a black powder coated heat shield to help prevent heated engine air from entering the intake inlet. Included are the velocity stack adapter, hose clamps, MAF adapter ring, couplers, stainless steel clamps and all necessary hardware for an OE fit and finish. The Spectre Intake tube comes with an adapter to mount the stock MAF sensor.

Product Features:
  • Designed for horsepower and torque increase
  • Easy to install performance
  • Includes a Spectre reusable air filter
  • High quality polished aluminum tubes
  • Stock MAF sensor fits with supplied adapter ring
  • Passenger side Air Filter Position
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • Will not void vehicle warranty(limited)
See More

Spectre – Spectre Air Intake Kit (Part No.9900K)

Spectre Air Intake Kit

from

$207.99
Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a black Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:
  • DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
  • IMPROVED ENGINE SOUND: Hear the power under the hood
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
  • HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
  • Will not void vehicle warranty(limited)
See More

Flowmaster Inc. – Cold Air Intake – Delta Force – 99-04 GM Trucks w/ 4.8L or 5.3L (Part No.615116)

Cold Air Intake - Delta Force - 99-04 GM Trucks w/ 4.8L or 5.3L

from

$449.99
Cold Air Intake – Delta Force – 99-04 GM Trucks w/ 4.8L or 5.3L

aFe POWER – Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance (Part No.51-74101)

Momentum GT Cold Air Intake: Gain up to 15 Horsepower! Dry Air Filter For Easy Maintenance

from

$435.99
Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Product Features:
  • Pro DRY S Filter Media
  • 3 Layer Synthetic Oil-Free Media
  • Washable And Reusable
  • 7 in. Tall 360 deg. Inverted Top Air Filter
See More

aFe POWER – Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow (Part No.54-10092)

Magnum FORCE Cold Air Intake: Gain up to 18 Horsepower! Oiled Air Filter For Maximum Airflow

from

$376.99
Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:
  • Uses Pro 5R Filter For Maximum Air Flow
  • Rotomolded Plastic Tube For Maximum Air Flow
  • 77% cfm Flow Gain
  • Improved Throttle Response
See More

Most Popular 2002 Chevrolet Avalanche 1500 Performance Steering Products

Customize your Chevrolet with 1 Performance Steering Products products like Performance Body Mounts, all priced under $369.99.

Energy Suspension – BodyMntBshKt (Part No.3.4156G)

BodyMntBshKt

from

$369.99
BodyMntBshKt

Top Picks for 2002 Chevrolet Avalanche 1500 Performance Engines

Upgrade Chevrolet Avalanche 1500s with top-quality Performance Engines parts, including 21 OEM and aftermarket selections for your 2002 model.

Competition Cams – XFI XE-R 224/230 Hydraulic Roller Cam (Part No.54-444-11)

XFI XE-R 224/230 Hydraulic Roller Cam

from

$541.99
HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.

Product Features:
  • HYDRAULIC ROLLER – XFI XE-R: High rpm street/strip with XE-R lobe designs. Requires custom tuning.
  • 273/279 Advertised Duration, 224/230 Duration @ .050″, .581″/.588″ Lift, 114 Lobe Separation
  • Use Beehive Valve Spring part No. 26918-16 with this camshaft
See More

B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)

Tork Master 2000: Value-Priced Street Performance Torque Converter

from

$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Mr. Gasket – Ls1 Late Thermostat (Part No.6367)

Ls1 Late Thermostat

from

$37.99
Designed to open at 160 degrees every time, regardless of engine rpm, and it’s high-flow design and brass and copper construction eliminate the damaging effects of cycling when you’re stuck in stop-and-go traffic. It includes the rubber gasket and has a pressure relief valve.

Product Features:
  • Opens sooner than stock at 160 degrees
  • High flow design for performance applications
  • Includes rubber o-ring seal/gasket
  • Incorporates pressure relief valve
See More

Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)

XFI XE-R 232/234 Hydraulic Roller Cam

from

$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.

Product Features:
  • HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
  • 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
  • Use Dual Valve Spring part No. 26925-16 with this camshaft
See More

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-412-11)

XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1870.00
XFI RPM 212/218 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

Competition Cams – XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-426-11)

XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1867.00
XFI RPM HI-LIFT 222/224 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

Competition Cams – XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-408-11)

XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00
XFI RPM 206/212 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV (Part No.K54-414-11)

XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

from

$1195.00
XFI RPM 216/220 Hydraulic Roller Cam K-Kit for GM LS GEN III/IV

B & M – Torque Converter, Holeshot 3000 (Part No.70421)

Torque Converter, Holeshot 3000

from

$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.

Product Features:
  • Furnace Brazed Impeller
  • Steel Alloy Pump Drive Tube
  • Heavy Duty Needle Bearing
  • Between Stator and Turbine
  • Furnace Brazed Turbine
See More

Competition Cams – ENGINE VALVE LIFTER (Part No.15850-16)

ENGINE VALVE LIFTER

from

$868.99
ENGINE VALVE LIFTER

Competition Cams – Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-600-11)

Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99
Thumpr 219/233 Hydraulic Roller Cam for GM LS GEN III/IV

Competition Cams – LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV (Part No.54-454-11)

LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV

from

$805.99
LSR Rectangular Port 227/243 Hydraulic Roller Cam for GM LS GEN III/IV

Competition Cams – XFI RPM 212/218 Hydraulic Roller Cam (Part No.54-412-11)

XFI RPM 212/218 Hydraulic Roller Cam

from

$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:
  • Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
  • Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
  • Provides outstanding low RPM torque with increased stability.
See More

Competition Cams – XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam (Part No.54-424-11)

XFI RPM HI-LIFT 212/218 Hydraulic Roller Cam

from

$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:
  • Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
  • Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
  • Provides outstanding low RPM torque with increased stability.
See More

Competition Cams – XFI XE-R 238/240 Hydraulic Roller Cam (Part No.54-448-11)

XFI XE-R 238/240 Hydraulic Roller Cam

from

$541.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power.

Product Features:
  • Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
  • Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
  • Provides outstanding low RPM torque with increased stability.
See More

Competition Cams – XFI RPM 216/220 Hydraulic Roller Cam (Part No.54-414-11)

XFI RPM 216/220 Hydraulic Roller Cam

from

$541.99
HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.

Product Features:
  • HYDRAULIC ROLLER – XFI RPM: Great mid-range with superior top end power. Requires tuning.
  • 269/273 Advertised Duration, 216/220 Duration @ .050″, .525″/.532″ Lift, 114 Lobe Separation
  • Use Beehive Valve Spring part No. 26915-16 with this camshaft
See More

B & M – Tork Master 2400 (Part No.70418)

Tork Master 2400

from

$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe

Product Features:
  • New Precision Pump Drive Tube
  • Pressure Tested
  • Fully Balanced
  • Needle Thrust Bearing
  • New Thrust Washer
See More

Competition Cams – ENGINE ROCKER ARM (Part No.19024-1)

ENGINE ROCKER ARM

from

$72.99
ENGINE ROCKER ARM

Competition Cams – ENGINE ROCKER ARM (Part No.1675-1)

ENGINE ROCKER ARM

from

$62.99
ENGINE ROCKER ARM

Competition Cams – Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud (Part No.4856-1)

Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud

from

$8.99
Flat 1 Piece Guide Plate for GM LS with 3/8" Pushrod and 8mm Stud

Competition Cams – Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud (Part No.4854-1)

Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud

from

$8.99
Flat 1 Piece Guide Plate for GM LS with 5/16" Pushrod and 8mm Stud

In-Demand Performance Exhaust Products for 2002 Chevrolet Avalanche 1500s

Select from 2 premium Performance Exhaust Products parts for your 2002 Chevrolet Avalanche 1500, with prices ranging from $152.99 to $255.99.

Flowmaster Inc. – Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.953047)

Super 40 Series Muffler, 3in Center Inlet 3in Offset Outlet, Non-Reversible, Aggressive Sound

from

$152.99
The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More

Flowmaster Inc. – 70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound (Part No.853072)

70 Series Muffler, 3in Center Inlet 3in Offset Outlet, 22in long, Non-Reversible, Mild Sound

from

$255.99
The 70 series utilizes Flowmaster’s patented Delta Flow technology and an enlarged case for improved sound control along with mileage and power gains. Perfect for use on trucks, SUV’s, RVs, tow vehicles and high performance street cars where space allows. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.

Product Features:
  • Mild to stock exterior exhaust tone
  • Minimal interior resonance
  • Recommended for SUV/trucks/motorhomes/tow vehicles
  • Improved horsepower, torque and potential mileage improvement
  • Race proven patented Delta Flow technology
See More

Most Sold 2002 Chevrolet Avalanche 1500 Performance Air Filters

Explore our best-selling Chevrolet parts for the 2002 Avalanche 1500 among 1 OEM and aftermarket options starting from $42.49.

Spectre – Spectre Replacement Air Filter (Part No.HPR8755)

Spectre Replacement Air Filter

from

$42.49
This Spectre OEM replacement air filter is an easy to install performance option for the stock panel air filter in multiple Chevy and GM truck applications. With its HPR (High Performance Replacement) synthetic air filter media, this panel air filter has been designed to provide more horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. Engineered to fit in the stock air box, this air filter is easy to install and has been engineered with a sealing edge specific to your air box to insure a proper seal for great engine protection.

Product Features:
  • HPR OE Replacement Air Filter
  • High flow replacement filter designed to fit perfectly in your stock air box
  • Engineered for increased flow and greater performance
  • Fits multiple Chevy and GM truck applications
  • Factory pre-oiled and ready to use
  • Easy to install with no special tools or skills required
See More

Top-Rated Performance and Racing Products Brands For Your 2002 Chevrolet Avalanche 1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2002 Chevrolet Avalanche 1500s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and B & M, and more. Performance and Racing Products from these brands that fit a 2002 Avalanche 1500 start at just $42.49 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2002 Chevrolet Avalanche 1500 Performance and Racing Products

When it comes to maintaining or upgrading your 2002 Chevrolet Avalanche 1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2002 Chevrolet Avalanche 1500. With over 1 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $367.99. Plus, with over 2 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
from $367.99
(2)
Cold Air Intake: Adds Up To 10 Horsepower, With Washable Air Filter
“Installed this beast in about an hour with my pops. Easy install overall. She sounds real nice when she hums. Solid purchase from a solid company. Tha”

Popular Spectre 2002 Chevrolet Avalanche 1500 Performance and Racing Products

Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2002 Chevrolet Avalanche 1500 owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2002 Avalanche 1500, Advance Auto Parts carries a full inventory of 3 Spectre Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Spectre Performance and Racing Products range from $42.49 to $208.99, plus, with more than 78 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
Spectre Air Intake Kit
from $208.99
(53)
Spectre Air Intake Kit
“east to installed, gained horse power and gas mi”
Spectre Air Intake Kit
from $208.99
(1)
Spectre Air Intake Kit
“Looks Good”
Spectre Replacement Air Filter
from $42.49
(24)
Spectre Replacement Air Filter
“Great fitment and notice some better fuel economy! I highly recommend it.”

FAQs for 2002 Chevrolet Avalanche 1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2002 Chevrolet Avalanche 1500s?

Out of 61 Performance and Racing Products that fit 2002 Chevrolet Avalanche 1500s, the following parts are the top sellers:

What’s the price range for 2002 Chevrolet Avalanche 1500 Performance and Racing Products?

Performance and Racing Product prices for the 2002 Chevrolet Avalanche 1500 start at $8.99 and go up to $1,870.00 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2002 Chevrolet Avalanche 1500?

The average price for Performance and Racing Products for the 2002 Chevrolet Avalanche 1500 is $444.69. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Avalanche 1500 model years?

Yes, we currently carry Performance and Racing Products for 3 model years of Chevrolet Avalanche 1500s between 2003 and 2006. Performance and Racing Products are bought most frequently for the following model years: 2006, 2005, 2004, and 2003.

What are the cheapest Performance and Racing Products for my 2002 Chevrolet Avalanche 1500?

The cheapest 2002 Chevrolet Avalanche 1500 Performance and Racing Products we carry in stock are:

What are the top-rated Performance and Racing Products that fit the 2002 Chevrolet Avalanche 1500?

Out of 379 reviews by customers, our 2002 Chevrolet Avalanche 1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2002 Chevrolet Avalanche 1500 and their top-rated products:

What types of Performance and Racing Products do you sell for my 2002 Chevrolet Avalanche 1500?

Can I get help with 2002 Chevrolet Avalanche 1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.

What is your return policy for Chevrolet Avalanche 1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Chevrolet Avalanche 1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.