2002 Chevrolet Astro Drive Shafts and Axles

Essential 2002 Chevrolet Astro Drive Shafts and Axles

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10210)

CV Axle Shaft Assembly

from

$121.99
N

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10208)

CV Axle Shaft Assembly

from

$99.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Yukon Gear – Thrust Washer Kit For GM 7.2" IFS Stub Shaft (Part No.33526)

Thrust Washer Kit For GM 7.2" IFS Stub Shaft

from

$46.99
Product Features:
  • Thrust washer kit
  • Fits GM 7.2″ IFS
See More

Yukon Gear – Axle Seal For ’88 And Newer GM 8.5" Chevy C10 (Part No.30108)

Axle Seal For '88 And Newer GM 8.5" Chevy C10

from

$11.99
Axle seal for ’88 and newer GM 8.5″ Chevy C10.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits 1988 and up GM half ton truck
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – 7.2IFS GM 01 & Up Envoy Disconnect Housing Seal (Part No.30292)

7.2IFS GM 01 & Up Envoy Disconnect Housing Seal

from

$44.99
7.2IFS GM 01 & up Envoy disconnect housing seal.

Product Features:
  • Disconnect housing seal
  • Fits 2001 and up GM 7.2″ IFS in GMC Envoy
See More

Driveworks – Clutch Release Bearing (Part No.S-SCH-208)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

Driveworks – Clutch Release Bearing (Part No.S-B-2010)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

National – Shaft Repair Sleeve (Part No.99174)

Shaft Repair Sleeve

from

$45.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Help – Axle Shaft Retainer (Part No.05311)

Axle Shaft Retainer

from

$6.49
An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

Product Features:
  • Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Driveworks – Universal Joint (Part No.DW-331BL)

Universal Joint

from

$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:
  • The cross is hot forged for the higher torque and horsepower
  • The bearing cups are made by cold forging, having higher strength and better rigidity
  • Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
  • Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
  • Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
  • Snap rings are held to strict tolerances to ensure proper cup position and retention
  • Nitrile rubber seals to optimize grease retention and reduce contamination
See More

Spicer – Universal Joint (Part No.5-178X)

Universal Joint

from

$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

Dorman – Driveshaft Slip Yoke (Part No.697-558)

Driveshaft Slip Yoke

from

$217.99
Drive shaft slip yoke vibrating, clunking or failed completely? This slip yoke directly replaces the original equipment on specific vehicle years, makes and models.

Product Features:
  • Direct replacement – this drive shaft slip yoke directly replaces the original equipment yoke on specified vehicles.
  • Effective fix – replacement restores safe, smooth driveline operation.
  • Rigorously tested – designed and evaluated to assure safe, reliable operation
  • Trustworthy quality – backed by team of engineers and inspectors in the United States
See More

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

C/Clip For GM 7.5", 7.6" & 8"

from

$14.99
Product Features:
  • c-clip for GM 7.5″, 7.625″ and 8.0″
See More

Dorman – Spindle Nut (Part No.K1002831647DOR)

Spindle Nut

from

$6.19
Spindle Nut

Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)

GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit

from

$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • 2.800″ O.D.
  • 1.620″ I.D.
See More

Yukon Gear – Axle Bearing & Seal Kit For Astro Van Rear (Part No.10038)

Axle Bearing & Seal Kit For Astro Van Rear

from

$146.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit, TorringtonBrand, 2.445″ OD, for ’02 and older Astro and Safari. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for 2002 and older Astro van
  • Includes axle bearing and seal
  • Services one side
See More

Yukon Gear – 7.5" & 8.2" GM Redi Sleeve Yoke Saver (Part No.30221)

7.5" & 8.2" GM Redi Sleeve Yoke Saver

from

$136.99
7.5″ & 8.2″ GM REDI sleeve yoke saver.Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits GM 7.5″, 7.625″ and 8.2″
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-782)

Rear Drive Shaft: Adjustable

from

$469.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-528)

Rear Drive Shaft: Adjustable

from

$537.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9146)

Drive Shaft: Not Greasable, Direct Replacement

from

$489.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.946-183)

Rear Drive Shaft: Adjustable

from

$551.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Front Drive Shaft: Greaseable, OE Fix (Part No.936-114)

Front Drive Shaft: Greaseable, OE Fix

from

$524.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation.
  • All-new manufacturing – made 100% new, not remanufactured, so there’s no core charge or return hassle.
  • Quality engineering – designed in the United States and backed by decades of automotive aftermarket experience
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Cardone – Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9396)

Drive Shaft: Not Greasable, Direct Replacement

from

$556.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

Dorman – Front Drive Shaft: Adjustable (Part No.938-189)

Front Drive Shaft: Adjustable

from

$389.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable (Part No.976-916)

Rear Drive Shaft: Greaseable

from

$716.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Greaseable (Part No.976-917)

Rear Drive Shaft: Greaseable

from

$719.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Cardone – Drive Shaft: Greasable, Direct Replacement (Part No.65-1037)

Drive Shaft: Greasable, Direct Replacement

from

$469.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.

Product Features:
  • Built to match O.E. form, fit and function.
  • 100% NEW universal joints are installed to ensure proper fit and optimal performance.
  • All slip yokes are lubricated to prevent premature wear.
  • Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
See More

2002 Chevrolet Astro Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 2002 Chevrolet Astro. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 37 different Drive Shafts and Axles in our inventory ranging from $1.99 to $883.99. That means you can find the exact parts or products you need to keep that 2002 Chevrolet Astro running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 2002 Chevrolet Astro. Spicer, National, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 2002 Chevrolet Astro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 22 reviews in this category, some of the top rated parts include Universal Joint with 5.0 stars and Shaft Repair Sleeve with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 2002 Chevrolet Astro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 2002 Chevrolet Astro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 2002 Chevrolet Astro demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Astro the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Axle Shaft Lock C-Clips categories, plus more. For a 2002 Chevrolet Astro, our most popular Dorman – Help Drive Shafts and Axles include:
Axle Shaft Retainer
from $6.49
(1)
Axle Shaft Retainer
Axle Shaft Lock C-Clips

Top 2002 Chevrolet Astro Drive Shafts and Axles from Spicer

Spicer products are another trusted brand when it comes to Drive Shafts and Axles for your 2002 Chevrolet Astro. Popular Spicer parts include:
Universal Joint
from $44.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints

FAQs for 2002 Chevrolet Astro Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 2002 Chevrolet Astro?

Out of 37 Drive Shafts and Axles for the 2002 Chevrolet Astro, the most popular in our inventory are:
Multi Purpose Seal
from $17.99
(7)
Multi Purpose Seal
Axle Shaft Seals
Front Drive Axle Inner Shaft Bearing
from $13.49
This product is not rated
Front Drive Axle Inner Shaft Bearing
Axle Shaft Bearings
Spindle Nut
from $17.00
This product is not rated
Spindle Nut
Axle Nuts

What are the top-rated 2002 Chevrolet Astro Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 2002 Chevrolet Astro based on customer reviews/ratings are:
Universal Joint
from $15.99
(1)
Universal Joint
“Exact fit and worked perfectly”
Shaft Repair Sleeve
from $45.49
(1)
Shaft Repair Sleeve
“To use this sleeve on a torque converter, the supplied tool isn’t long enough. However a piece of PVC pipe can work. (normally this is used on a harmo”