2002 Audi S4 Wheels and Tires
More 2002 Audi S4 Wheels and Tires Categories
If you’re looking for an original Wheels and Tires replacement for a 2002 Audi S4, you can search through our selection below. You’ll also find aftermarket and OEM Wheels and Tires to meet your needs.
Essential 2002 Audi S4 Wheels and Tires
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510020)
from
$26.99
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Driveworks – Wheel Bearing: Direct Fit, 1 Piece (Part No.S-510019)
from
$48.49
WJB Automotive wheel bearings are a direct replacement for original parts at a much more affordable cost. Each wheel bearing is engineered to meet or exceed OE specifications, and goes through intensive quality control inspections to ensure proper fitment. Manufactured using high-precision machinery and advanced heat treatment processes, these bearings are designed for maximum durability and extended periods of use under any driving condition. Specific to certain applications, WJB bearings have multi-lip seals built into the bearing for increased protection against invasive contaminants and premature wear.
Product Features:
See More
Product Features:
- Depending on the application, specified WJB wheel bearings have integrated encoder rings that automatically sync with the vehicle’s anti-lock braking system (ABS) upon successful installation
- Engineered, manufactured, and tested to meet or exceed OE specifications
- Integrated seal design improves contamination resistance for a longer bearing life
- High performance grease is used to lubricate the inner raceway to ensure smooth operation, higher operating temperatures, and minimal noise
- Manufactured from high quality steel to maximize durability under even the harshest driving conditions
- Brand may vary by location
Autel – MX-Sensor 1-Sensor Bulk Box 240 (Part No.300050)
from
$7321.99
The 300050 is a convenient bulk box of 240 individually bagged Autel MX-Sensor 1-Sensors. The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with rubber valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99 percent compatible with OE sensors, and meets SAE standards J1205 and J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Bulk Box of (240) Individually Bagged 1-Sensors with Rubber Press-in Valve
- Bulk Box of 240 Individually Bagged 1-Sensors with Rubber Press-in Valve
- Combined Frequency 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Maximum Signal Strength / Battery Reliability
- Maximum Signal Strength, Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 4 Piece (Part No.33500-4)
from
$129.99
Schrader TPMS Solutions, a brand of Sensata Technologies, is the leading global manufacturer of tire pressure monitoring systems (TPMS). Schrader is a pioneer in TPMS and its direct TPMS technology can be found in over 50 percent of global OEM vehicle platforms. Schrader offers a complete line of TPMS solutions, that help manage your shop’s needs from start to finish, offers ranging from their single-SKU, programmable EZ-sensor® family of products to pre-programmed OE replacement sensors, and programming and diagnostic tools, retrofit kits, and the industry’s first free online TPMS training www.TPMSAcademy.com For more information about Schrader and its products visit: www.SchraderTPMS.com
Product Features:
See More
Product Features:
- Schrader TPMS sensors and valves are designed and manufactured to meet all OEM quality and functional specifications
- Sensor must be programmed to specifi Y/M/M vehicle
- Compatible with most programming tools
- Make sure that your TPMS programming tool is updated to it’s latest version
- Combines 314.9, 315 & 433 MHz application into one sensor
- Future proofed to support new and pending OE system technologies
- Optimizes inventory levels and returns
- Reduces overal cost and increases speed of service
- Use service kit 20018 to replace the rubber valve assembly
- Valve Core Torque = 3.5 in-lbs (0.4 Nm)
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Carquest Premium – Hub Assembly with Wheel Bearing 950-007: With Mounting Hardware (Part No.950-007)
from
$282.99
Carquest Premium hub assemblies have been rigorously quality tested to ensure they meet Original Equipment (O.E.) specifications and provide the same reliability and durability expected from OE parts. All Carquest Premium hub assemblies are coated with an obsidian e-coating that protects the hub from rust and corrosion. Our stringent manufacturing processes and high-quality components allow us to stand behind our Carquest Premium hub assemblies with an industry-leading warranty.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Fully coated with an obsidian e-coating for enhanced rust and corrosion prevention
- High-quality steel and surface treatments for proper fit and endurance
- Roll-form bearing design applies exact preload for increased durability (where applicable)
- Bearings and seals are engineered to the requirements of each specific vehicle application
- Superior ABS sensors with matching signal and enhanced cord insulation for durability (where applicable)
Driveworks – Taper Bearing Cone (Part No.S-LM-300849)
from
$17.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Huf North America – Aluminum TPMS Valve (Clamp-In) – 43mm (Part No.RDV027)
from
$13.29
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
Huf North America – Aluminum Valve 56mm (Part No.RDV025)
from
$10.49
Product Features:
See More
- Silver
- Adjustable 0-36 degrees
- High quality coating to prevent corrosion
- Only one tool needed (35 in-lbs)
Rein – Front Wheel Hub (Part No.BEH0028R)
from
$111.99
Front Wheel Hub
McGard – Black Bolt Style Radius Seat Lock Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28318)
from
$84.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome with black PVD producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
McGard – Chrome Bolt Style Radius Seat Lock Bolt Set (M14 x 1.5 Thread Size) – Set of 4 Locks and 1 Key (Part No.28018)
from
$59.99
Protecting the world’s finest wheels and tires from theft since 1964. Wheel Lock Bolts are designed in the USA and manufactured in the EU and USA. Presently, McGard is an Original Equipment wheel lock supplier to most automobile brands around the world. These easy-to-use wheel locks function like regular lug bolts, but require a special key tool for installation and removal.
Product Features:
See More
Product Features:
- User friendly key guides the key into the lock pattern for easy installation and removal.
- The computer generated key designs allow for an infinite number of key patterns.
- The extra narrow pattern groove on the lock resists the intrusion of removal tools into the pattern.
- Every McGard wheel lock is fully machined from restricted chemistry steel made specifically for McGard and through-hardened for its unsurpassed level of security.
- McGard’s plating process includes multiple layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust.
- The bolt stem has a dacromet coating to meet O.E.M. standards.
- For use with steel or aluminum wheels with a ball-shaped seat.
Dorman – M14-1.50 Wheel Bolt – 17mm Hex, 26mm Thread Length (Part No.610-318)
from
$3.49
This replacement wheel lug bolt matches the original equipment hard wear dimensions for a reliable fit. Made of quality materials to ensure safe installation of the wheel under all conditions.
Product Features:
See More
Product Features:
- Ideal replacement – this wheel lug bolt is a direct replacement for the original hardware
- Durable construction – made of quality materials for safe, reliable service
- Cost-effective solution – offers original equipment quality at a competitive price
- Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
Rein – Wheel Bolt (Part No.HWB0011)
from
$3.29
Rein OE quality wheel bolts fit European vehicles the way the original manufacturer intended. Designed to be direct replacements for the original wheel bolts are identical to OEM.
Product Features:
See More
Product Features:
- Wheel bolt is produced by an OE manufacturer
- Packaged in convenient quantities.
- Direct replacement for correct fitments
- Manufactured to strict engineering standards/specifications in materials and tolerances
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
National – Multi Purpose Seal (Part No.224520)
from
$5.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Autel – MX-Sensor 1-SensorM Bulk Box (20) (Part No.300060)
from
$525.99
Product Features:
See More
- Bulk Box of (20) Individually Bagged 1-Sensors with Metal Press-in Valve
- Combined Frequency: 315MHz & 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – 1 Boxed MX-Sensor 1-Sensor Press-in Aluminum Valve Stem (Part No.1-SENSORM)
from
$44.49
The 1-Sensor is a programmable universal TPMS sensor. It features a combined frequency of 315MHz and 433MHz with aluminum valve stems. The press release button allows for rubber or metal valve stems to be replaced interchangeably. The 1-Sensor is reprogrammable, 99% compatible with OE sensors, and meets SAE standards J1205 & J1206. Replacement valve stems are available for purchase in rubber or metal.
Product Features:
See More
Product Features:
- Combined Frequency: 315MHz and 433MHz
- Programmable with Autel TPMS Service Tools
- Exclusive Press Release Button to Easily Replace Valve Stems
- Program to Replace 99% of OE Sensors
- Compatible with Autel Interchangeable Rubber, Aluminum or Color Metal Valve Stems
- Meets SAE Standards J1205 & J1206
- Maximum Signal Strength / Battery Reliability
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – 315/433MHz Universal Sensor (Part No.UVS7051)
from
$42.99
Professional installation is strongly suggested
Product Features:
See More
Product Features:
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece (Part No.33500)
from
$41.99
Schrader’s EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics scan tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.
Product Features:
See More
Product Features:
- MULTI-FREQUENCY: Combines 314.9, 315, and 433 MHz for extensive vehicle coverage
- COMPATIBILITY: Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- FUTURE-PROOFED: Patented technology supports new and pending OE system technologies
- DIRECT REPLACEMENT: Performs identically to OE replacement TPMS sensors
- COST SAVINGS: Designed for quick installation and optimized inventory levels to help get customers on the road safely and timely
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Schrader – TPMS Sensor Service Kit (Part No.20018)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Huf North America – Silver Finish-Includes Valve, Plastic Cap, Core, Grommet, Shear Collar Hex Nut (Part No.RDV023)
from
$9.49
BHsens (Huf) is an OE supplier that provides original replacement sensors in OE quality to the aftermarket for a multitude of vehicles. Huf has also developed the universal sensor IntelliSens UVS of equivalent quality, especially for repair shops, which cover nearly all vehicle models. While developing any products, Huf’s intention is to make it quick and easy for the installers to use. Huf Tire Pressure Sensors have the best coverage, fastest configuration process, and quickest and easiest assembly process in the market while maintaining the OE quality.
Product Features:
See More
Product Features:
- Complete Valve Kit for Huf OE and Aftermarket sensors
- Includes Valve, Plastic Cap, Core, Grommet and Hex Nut
- Flexible valve angle 0 to 36 degrees.
Xtra Seal – Parts Kit Audi Vw (Part No.17-20202AK)
from
$32.49
Parts Kit Audi Vw
REDI-Sensor – TPMS Service Kit, REDI-Sensor and OE Style (Part No.SE54190)
from
$4.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovations. Pivoting valve stem for expanded wheel fitment. OE validated part identical to the dealer. Continental aftermarket TPMS sensors include all component parts for ease of installation. Waterproof sensor is impervious to tire air moisture. Then, now, and into the future, we will be there for you, our customer.
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Autel – Rubber Valve Kit for Interchangeable MX-Sensors. Kit Includes 4 Rubber Valves. (Part No.MXSENSORRVK)
from
$11.49
The MXSensorRVK is a box of four press-in rubber valve stems. They are compatible with Autel 1-Sensors & Autel 315MHz & 433 MHz MX-Sensors.
Product Features:
See More
Product Features:
- Includes 4 Rubber Press-in Valve Stems
- Compatible with Autel 1-Sensors
- Compatible with Autel 315MHz & 433MHz MX-Sensors
- Warranty on Material and Workmanship
- High-quality valves are tested and certified to meet SAE industry standard J1205 / J1206 testing
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 43Mm Ball-Seat Valve; Silver, 1 Piece (Part No.1092)
from
$17.99
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- Ball-seat valve stem assembly
- 43mm/0.453″ rim hole compatibility
- 200 PSI maximum cold inflation pressure
REDI-Sensor – TPMS Service Kit (Part No.SE54191)
from
$8.49
All Continental brand TPMS parts are OE validated for fit, performance and reliability. Continental is a pioneer in TPMS and tires, with over a century of tradition and expertise leading the automotive market with state of the art technology and innovatio
Product Features:
See More
Product Features:
- OE – validated part identical to the dealer
- Electroless nickel-plated valve cores
- Advanced anodization of valve stems and hex nuts
- Includes torque specifications and installation instructions
- TPMS service kits are required whenever performing tire replacement or service
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Dill Air Control – Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece (Part No.VS-925A)
from
$8.49
Dill is the leader in the automotive aftermarket for TPMS replacement sensors, stems, kits, and tools.
Product Features:
See More
Product Features:
- TPMS Aluminum clamp-in valve stem for GM, Ford, Chrysler/Dodge/Jeep, Subaru
- 0.453″ rim hole compatiblity
- 200 PSI maximum cold inflation pressure
Schrader – TPMS Sensor Service Kit (Part No.20008)
from
$3.49
Schrader service kits are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. Service kit components may include but are not limited to a valve core, sealing cap, grommet, nut, or valve stem. All pieces in a kit are intended for one-time use only and must be replaced with every tire change. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: kit components are designed to replace original manufacturer parts
- DURABLE: Service Kits are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service Kit is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: kits are intended for one-time use only and must be replaced with every tire change
Popular 2002 Audi S4 Wheels and Tires Categories
2002 Audi S4 Wheels and Tires
You count on your 2002 Audi S4 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Wheels and Tires. With 55 Wheels and Tires ranging in price from $1.99 to $7,321.99, you’re sure to find everything you need for your 2002 Audi S4.
Brands matter. If you want to shop a specific Wheels and Tires brand, we stock 15 different brands like Autel, Schrader, and Dorman. 2002 Audi S4 Wheels and Tires start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Wheels and Tires is by asking professionals. Short of that, you can shop with confidence thanks to our 190 extensive product reviews on 2002 Audi S4 Wheels and Tires. Some of the top-rated Wheels and Tires products we carry are Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece with 4.7 stars and Bearings with 4.3 stars.
Did we mention you can order your Wheels and Tires from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Wheels and Tires inventory for your 2002 Audi S4 below to get started!
Top-Rated Wheels and Tires Brands For Your 2002 Audi S4
Trusted Wheels and Tires OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2002 Audi S4 running right for years to come. In our inventory you’ll find brands like Autel, Schrader, Dorman, and even more.
Popular Dorman – Pik-a-Nut Wheels and Tires
You’ll find popular Dorman – Pik-a-Nut brand products across Wheel Hardware. All are waiting to get your 2002 Audi S4 back on the road. Some of the top-rated Dorman – Pik-a-Nut products in these categories are:
from
$4.29
(4)
Wheel Bolt: M14-1.50 Thread Size, Ball Seat Style, 17 mm Hex Size, Black, 1 Pack
Wheel Bolts
Top-Rated Schrader Wheels and Tires
If Schrader are what you’re looking for, our inventory holds plenty. We stock Schrader brand Wheels and Tires for your 2002 Audi S4, and some of our most reviewed Schrader parts include:
from
$41.99
(69)
Programmable Tire Pressure Sensor (TPMS): Snap-In Rubber Valve, 1 Piece
Tire Pressure Sensors
FAQs for 2002 Audi S4 Wheels and Tires
What are the most purchased Wheels and Tires for the 2002 Audi S4?
Out of 55 Wheels and Tires for the 2002 Audi S4, the most popular in our inventory are:
from
$51.99
This product is not rated
Programmable Tire Pressure Sensor (TPMS): Adj. Angle Clamp-In Alum Valve, 1 Pc
Tire Pressure Sensors
What are the top-rated 2002 Audi S4 Wheels and Tires?
Top-rated Wheels and Tires for your 2002 Audi S4 based on customer reviews/ratings are:
from
$8.49
(3)
Clamp-In TPMS Service Kit: Metal, 0.453 Inch Aluminum Valve Stem, 20 Piece
“Used to replace the rubber valves that came with the tpms sensor”
from
$22.99
(3)
Bearings
“Fit perfectly into my Nissan Frontier’s 4WD wheel hub. Only time will tell its’ durability. Advance Auto Parts had the best price by a considerable ma”
