2001 Volvo V40 Engine Parts

Name: Turbocharger
Brand: Rotomaster
SKU: M8040115R
Price: 671.99 USD

Below you will find various in-demand Volvo Engine Parts, components and accessories for your 2001 V40. Advance Auto Parts has popular V40 parts like Camshafts, Valve Cover and Cylinder Heads, Engine Mounts and more. You’ll also find aftermarket and OEM Engine Parts for other V40 model years including 2000, 2002, 2003, 2004 and more. Select a category of 2001 Volvo V40 Engine Parts below and start saving instantly.

Popular 2001 Volvo V40 Engine Parts Categories

Engine Timing Belt Kit With Water Pumps

Engine Variable Timing Solenoids

Valve Cover Gaskets

Turbochargers and Parts

Camshaft Position Sensors

OE Engine Oil Coolers

Rear Main Seal Sets

Cylinder Head Bolt Sets

Turbocharger Boost Sensors

Crankshaft Position Sensors

Timing Covers

Cylinder Head Gasket Sets

Computer Control Relays

Timing Belt Component Kits

Cylinder Head Gaskets

Crankshaft Seals

Timing Belts

Crankshaft Bolts

Timing Belt Tensioners

Oil Caps

Engine Mount Brackets

Camshaft Position Sensor Connectors

Crankshaft Pulleys

Intercooler Connection Hoses

Timing Cover Seals

Engine Valve Stem Seals

Engine Oil Separators

Oversized Main Bearings

Standard Rod Bearing Sets

Cylinder Head Bolts

Turbocharger Coolant Lines

Camshaft Seals

Balance Shaft Seals

Engine Oil Seal Rings

Engine Oil Cooler Adapter Seals

Camshaft Plugs

Engine Valves

Engine Timing Belt Tensioner Pulleys

Turbocharger Drain Gaskets

Engine Oil Cooler Line O-Rings

Dipstick Housing Gaskets

Essential Engine Parts for 2001 Volvo V40s

from

$671.99

Rotomaster Remanufactured Turbochargers meet the growing demand for maximum vehicle performance with optimal fuel efficiency. Every Rotomaster Turbocharger has been designed and tested to guarantee O.E. fit and performance. Rotomaster is committed to getting your vehicle back to peak performance with these direct-replacement turbochargers.

Product Features:

All wheels, shafts and corresponding bores are measured and controlled with specific go/no-go tolerances and renewed or replaced as needed to ensure trouble-free operation.
Each unit is 100% disassembled and thoroughly cleaned using proprietary processes and dedicated specialized equipment.
All components are inspected to exact standards, and renewed as appropriate to ensure that problematic areas that typically cause failure are renewed to the highest quality standards.
100% of rotating, journal, and thrust bearings and seals are replaced, and all mating surfaces/passages are renewed as required for a longer-lasting unit.
Each unit comes with a pre-lube syringe to ensure product protection during installation.

from

$20.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$24.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$2.76

Valve Stem Seal

from

$6.42

Oil Cooler Seal

from

$108.99

This turbocharger boost solenoid is designed to match the fit and function of the original solenoid on specified applications, and is engineered for reliable performance and durability.

Product Features:

Direct replacement – this turbocharger boost solenoid is designed to match the fit and function of the original part on specified applications.
Restores functionality – reliable replacement for an original part that has failed due to corrosion, heat or vibration.
Durable construction – this solenoid is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$56.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Validated for fit, form, and function
Unsurpassed quality you can trust

from

$43.99

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$45.30

The APA/URO Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$40.77

Intercooler Hose

from

$912.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$247.31

The Febi/Bilstein Variable Valve Timing (VVT) Solenoid is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$154.43

The Ruville Timing Belt Kit is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation. Ruville fulfils the highest standards with German engineering know-how. No matter whether from in-house production or from our partners, every product that bears the Ruville quality seal has gone through a long, intensive testing process.

Product Features:

OE-Equivalent and a direct fit application.
Complete replacement kit.
Precision molded teeth.
Resistant to abrasion and heat.
Durable long life performance. Ruville / INA Technical Brochure

from

$242.12

Main Bearing Set

from

$54.99

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$15.65

Intake Valve

from

$60.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$2.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$2.15

Turbo Oil Line O-Ring

from

$121.56

The Meyle Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$265.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$49.98

The INA Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$62.50

GMB is one of the world’s largest designers and manufacturers of automotive service products. GMB offers OE quality water pumps, universal joints, tensioner idler bearings and chassis parts for most European, Asian and Domestic vehicles. Includes Pulley, Bearing and Bracket.

from

$4.67

Turbo Drain Gasket

from

$210.38

With Vibration Damper – The decoupled belt pulley should be checked after about 90,000 km and replaced together with the tensioner belt. Rely on OEM quality, as only satisfied customers are good customers. No matter whether a drive belt is too loud or ancillary units are damaged by vibration – belt drive decoupling deficiencies are always associated with dissatisfaction. Anyone not using original parts for a decoupled belt pulley is making a false saving. Cheap counterfeit products generally lead to complaints after a short running time and loss of customer confidence. On the other hand, original parts from CORTECO still work reliably, often after 100,000 kilometers.

Product Features:

Increased service life of the belt and of the belt tensioner
Quieter running of the belt drive
Less stress on adjoining components
Safety from OEM quality
Satisfied and loyal customers Decoupled Pulley Brochure

from

$6.21

The Professional Parts Sweden Cam Plug is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:

Stays cool at high temperatures
Designed to seal minor surface irregularities
No re-torque required

from

$6.82

Cylinder Head Bolt

Upgrade your 2001 Volvo V40 with Top-Quality Engine Parts

When it comes to maintaining or upgrading your 2001 Volvo V40, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Volvo or enhancing its overall performance, Engine Parts are key to keeping your V40 functioning at its best. At Advance Auto Parts, we offer a wide selection of 110 Engine Parts for the 2001 Volvo V40, designed to meet your needs without breaking the bank. From Camshaft replacements to Valve Cover and Cylinder Heads upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Engine Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Engine Parts for your 2001 Volvo V40 at great prices. Our Engine Parts inventory for this model ranges from just $1.18 to $1,024.99, with an average price of $92.24. Our 110 Engine Parts in stock come from 37 trusted brands, so you’re sure to find the right part for your 2001 Volvo V40 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Volvo V40, we stock popular OEM and aftermarket Engine Parts from top names like FELPRO, National, Carquest Premium, and more. FELPRO Engine Parts start at just $18.29 and boast an impressive 5 stars average rating from customers. National and Carquest Premium also bring quality to the table, with Engine Parts available starting at $8.99, and at an average 4 stars rating. With 91 customer reviews and counting, our 2001 Volvo V40 Engine Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Engine Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Volvo V40 is always ready to roll. We’re committed to providing you with everything you need to keep your V40 in top shape, all in one place. Start shopping confidently below for your 2001 Volvo V40!

Best-Selling Camshafts for 2001 Volvo V40s

Enhance the driving experience in your Volvo with 19 quality Camshaft components, starting at $6.21.

show more show less

from

$18.29

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$41.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$11.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$19.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$12.49

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$161.20

Camshaft Position Se

from

$27.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$432.99

A leader in vehicle electronic solutions, each premium product meets or exceeds OE specifications in appearance, fit, and function, ensuring easy installation and excellent performance. The product has been tested under extreme environments, including thermal shock and vibration, with unparalleled reliability, durability, and accuracy.

Product Features:

Products are produced in ISO 14001 and IATF 16949 certified facilities to ensure the highest quality and consistency throughout the production process.
Reliable circuit board and product structure design, 3D proofing, and field test verification to ensure correct signal output at all speeds.
Manufactured in an anti-static environment to ensure reliability and stability.
Extreme temperature and salt spray tests simulate real-world vehicle conditions to ensure durability and reliability.
Providing this premium product line, we meet the service professionals needs with the highest quality product every time the part comes out of the box.

from

$134.94

Camshaft Position Se

from

$26.90

Camshaft Seal

from

$25.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$24.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$18.49

ENGINE CAMSHAFT SEAL

from

$16.99

Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:

Matches OE form, fit and function
High quality rubber designed to keep water and dirt out
Quality construction for durability
Designed for under vehicle environment
Application specific for this vehicle

from

$15.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$15.62

Camshaft Seal

from

$13.78

Camshaft Seal, OE Fluoropolymer/Viton

from

$9.99

Matches OE form, fit and function
High quality rubber designed to keep water and dirt out
Quality construction for durability
Designed for under vehicle environment
Application specific for this vehicle

from

$6.21

The Professional Parts Sweden Cam Plug is manufactured using the highest quality materials and is designed to withstand high temperatures.

Product Features:

Stays cool at high temperatures
Designed to seal minor surface irregularities
No re-torque required

Most Popular 2001 Volvo V40 Valve Cover and Cylinder Heads

Customize your Volvo with 12 Valve Cover and Cylinder Heads products like Cylinder Head Bolt Sets, Cylinder Head Gaskets, and Cylinder Head Gasket Sets, all priced under $197.99.

show more show less

from

$60.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Avoid risk associated with re-use of T-T-Y (torque to yield) head bolts
Validated for fit, form and function
Unsurpassed quality you can trust

from

$49.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Requires no retorquing of the head bolts
Validated for fit, form, and function

from

$149.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability

from

$197.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces

from

$195.21

WARNING: This item cannot be returned for a replacement or refund if opened! OE identical sealing solutions for the aftermarket. The Elwis brand is synonymous with consistently high quality, outstanding delivery performances and – most importantly – innovative sealing solutions to the automotive aftermarket. Elwis unrivalled expertise in the field of advanced sealing solution engineering and management is passed on to our automotive aftermarket customers in the form of superb pricing, reliability and performance. All Elwis parts perform at least identically to their original counterparts.

Product Features:

OE Identical quality
Outstanding delivery performance
Innovative sealing solution

from

$96.67

Cyl. Head Bolt Set

from

$60.56

The AE range of high quality valve-train components includes application-specific valves, design and manufactured to OE standards. The top-engine environment is increasingly hostile, due to turbocharging and other techniques for CO2 reduction. Only components that employ OE design expertise, with the latest advanced materials and manufacturing quality, can provide the performance and durability that professional engine technicians demand. Valves are subjected to some of the highest stresses and temperatures in the engine, yet not only must they survive, they must also continue to seal perfectly. As a top-engine expert with a long heritage of innovation, AE provides the answer with high-precision designs. The choice of material is so critical that some AE valves, known as bi-metallic valves, are made from two materials, with the head optimized for strength and temperature resistance and the stem optimized to resist wear.

Product Features:

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$40.23

OE Quality
Optimized for strength
High temperature strength
Stem optimized to resist wear

from

$36.43

Intake Valve

from

$29.99

For secure, lasting macro and micro sealing, and protection against fuel, oil, water, and anti-freeze, Victor Reinz cylinder head gaskets deliver optimal service. Victor Reinz gaskets deliver OE proven strength and resistance to extreme temperatures and high-combustion pressures, and Victor Reinz engineers choose the most effective materials and designs from the global resources of Dana Incorporated.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$15.65

Intake Valve

from

$6.82

Cylinder Head Bolt

Top Picks for 2001 Volvo V40 Engine Mounts

Upgrade Volvo V40s with top-quality Engine Mounts parts, including 11 OEM and aftermarket selections for your 2001 model.

show more show less

from

$96.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VOLVO 99-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2004
Weight approx: 4 Lbs

from

$34.99

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1999-2004
Weight approx: 2 Lbs

from

$185.17

CORTECO powertrain/chassis mounts and bushings are designed to the highest quality standards and manufactured using leading-edge technology. As a specialist for the independent aftermarket, Corteco offers a wide selection of OEM quality vibration control spare parts from Vibracoustic. As a wholly owned subsidiary of Freudenberg, Vibracoustic is the world’s leading technology specialist for vibration control modules and components for the international automotive industry. New to the Corteco product range is a very light-weight engine mount, which shows the full innovative power of Vibracoustic. Reducing the weight of the mount makes it possible to optimize vibration control and reduce the weight. In addition, thermal separation ensures that no heat energy is transmitted to the mount, resulting in a considerable extension of service life. A cost advantage also comes from innovative manufacturing methods. Corteco now offers this engine mount as a spare part for a variety of BMW models.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise Vibration Control Brochure

from

$150.19

The APA/URO Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$121.56

The Meyle Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$118.35

Engine Mount Bracket

from

$88.15

Engine Mount

from

$65.18

Engine Mount

from

$63.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to VOLVO 01-04;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 2001-2004
Weight approx: 2 Lbs

from

$50.35

The Meyle Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

from

$37.13

The Febi Engine Mount is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Designed to reduce engine vibration and noise.

In-Demand Engine Gaskets and Seals for 2001 Volvo V40s

Select from 14 premium Engine Gaskets and Seals parts for your 2001 Volvo V40, with prices ranging from $1.18 to $56.99.

show more show less

from

$17.32

Camshaft Seal, Fluoropolymer/Viton

from

$21.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$54.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$56.99

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Low friction, Minimum power consumption, High chemical resistance, Low breakaway torque after standstill.
Able to be used in applications with minimal lubrication.
Thermal properties with a wide range of operating temperatures.

from

$39.22

Gasket Maker

from

$37.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Application specific design to ensure a perfect fit
Meets or exceeds all original equipment specifications
Engineered and manufactured specifically for repair applications
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$13.29

Valve Stem Seal Kit

from

$12.73

Camshaft Seal

from

$7.92

Valve Stem Seal

from

$7.87

All-around safety and reliability: Elring oil seals are manufactured for a wide range of applications. Whether they are installed in camshafts, crankshafts or axles, the high-precision seals are guaranteed to offer outstanding performance. Elring oil seals are made from tailor-made elastomer compounds to ensure excellent functionality and a long service life. They are available in various sizes and are supplied with detailed installation instructions.

Product Features:

Premium-quality materials such as FPM, ACM and PTFE for superior operational reliability
Various designs specifically adapted to the area of application ensure excellent functionality and performance
High-performance FPM guarantees optimum leak tightness

from

$3.88

Valve Stem Seal

from

$2.76

Valve Stem Seal

from

$2.15

Turbo Oil Line O-Ring

from

$1.18

SEAL RING – COPPER

Most Sold 2001 Volvo V40 Engine Timing Parts

Explore our best-selling Volvo parts for the 2001 V40 among 22 OEM and aftermarket options starting from $2.79.

show more show less

from

$43.99

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$2.79

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$65.99

Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:

100% tested for reliable performance
Durable housing features precisely machined mounting surface for proper sealing and fitment
Equipped with weep chamber or similar feature to help prevent unnecessary replacement
Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
All gaskets or seals necessary for water pump are included
This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components

from

$218.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$22.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust
Includes all the parts necessary to complete the repair unless otherwise noted
Includes all the parts necessary to complete the repair unless otherwise noted

from

$20.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$34.63

The Mitsuboshi Timing Belt is made to meet or exceed tough OE performance specifications and is resistant to high temperatures, is oil resistant and provides low noise and reliable operation.

Product Features:

High-tensile strength Carbon Cord
Abrasion resistant
High elasticity, high hardness HNBR rubber
Increased durability
Reduced noise
Rubber construction for superior flexibility
Special low friction tooth fabric

from

$136.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$49.98

The INA Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$265.99

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$247.31

Premium aftermarket replacement
Provides performance and dependability
Manufactured to meet OE specifications

from

$204.41

ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.
Durable long life performance.

from

$159.99

This replacement engine variable valve timing (VVT) solenoid is precision-engineered to match the fit and function of the original VVT solenoid. Made of quality materials for a long service life, it has been tested for proper performance.

Product Features:

Ideal replacement – this VVT solenoid is professionally engineered to match the function and performance of the stock part on specific vehicle applications.
Durable construction – this part is made from quality materials to ensure a long service life.
Excellent value – the VVT solenoid is built to perform like original equipment quality at a competitive price
Vehicle tested – has undergone on-vehicle testing to ensure proper fit and performance

from

$154.43

OE-Equivalent and a direct fit application.
Complete replacement kit.
Precision molded teeth.
Resistant to abrasion and heat.
Durable long life performance. Ruville / INA Technical Brochure

from

$112.80

Camshaft Adjuster So

from

$77.03

The Professional Parts Sweden Timing Chain Cover Assemblies, offers precise fitment, optimal cooling and lubrication. Providing protection for vital moving parts.

Product Features:

Direct replacement for a proper fit every time
Precision fitment to protect the timing chain and gears from debris
Corrosion-resistant for long lasting performance
High quality plastic or metal construction resists warping, cracking and porousness

from

$69.59

The ContiTech Timing Belt meets or exceeds the manufacturer s specifications for durability, fit and quality. The ContiTech Synchrobelt timing belt is resistant to high temperatures, oil resistant, provides low noise and reliable operation.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.

from

$62.50

from

$59.18

The Professional Parts Sweden Timing Chain Cover Assemblies, offers precise fitment, optimal cooling and lubrication. Providing protection for vital moving parts.

Product Features:

Direct replacement for a proper fit every time
Precision fitment to protect the timing chain and gears from debris
Corrosion-resistant for long lasting performance
High quality plastic or metal construction resists warping, cracking and porousness

from

$53.12

Timing Belt Idler

from

$45.30

The APA/URO Timing Belt Tensioner is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment it replaces.

Product Features:

OE-Equivalent and a direct fit application
High quality sealed precision bearing assembly
OE specified pulley
Durable long life performance

from

$32.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

Top-Rated Engine Parts Brands For Your 2001 Volvo V40

Shop for the best-rated brands offering Engine Parts and other products for your 2001 Volvo V40s. Below you’ll find some of our best rated Engine Parts from FELPRO, National, and Carquest Premium, and more. Engine Parts from these brands that fit a 2001 V40 start at just $8.99 and are rated as high as 5 stars. OEM and aftermarket Engine Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2001 Volvo V40 Engine Parts

When it comes to maintaining or upgrading your 2001 Volvo V40, using quality Engine Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Engine Parts, specifically designed for the 2001 Volvo V40. With over 9 FELPRO brand Engine Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.29, with an average price of just $64.45. Plus, with over 1 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Engine Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$60.99

This product is not rated

Engine Cylinder Head Bolt Set

“”

from
$20.79

This product is not rated

CAMSHAFT FRONT SEAL SET

“”

from
$22.99

This product is not rated

Engine Crankshaft Seal Kit

“”

Popular National 2001 Volvo V40 Engine Parts

National auto parts is one of the highest quality Engine Part brands in the market. Any 2001 Volvo V40 owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 2001 V40, Advance Auto Parts carries a full inventory of 8 National Engine Parts. Plus you will be keeping your Volvo in peak condition while saving money because prices on these National Engine Parts range from $8.99 to $54.99, plus, with more than 17 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Engine Parts below will deliver on both quality and value.

from
$32.49

This product is not rated

Multi Purpose Seal

“”

from
$27.99

This product is not rated

Shaft Repair Sleeve

“”

from
$54.99

This product is not rated

Shaft Repair Sleeve

“”

FAQs for 2001 Volvo V40 Engine Parts

Which Engine Parts are best-sellers for 2001 Volvo V40s?

Out of 110 Engine Parts that fit 2001 Volvo V40s, the following parts are the top sellers:

Multi Purpose Seal (15440036) – $11.99
Multi Purpose Seal (15440092) – $8.99
Engine Oil Filler Cap: 10129, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (5020010) – $11.99

What’s the price range for 2001 Volvo V40 Engine Parts?

Engine Part prices for the 2001 Volvo V40 start at $1.18 and go up to $1,024.99 for the most premium parts.

What’s the average price of a Engine Part for a 2001 Volvo V40?

The average price for Engine Parts for the 2001 Volvo V40 is $92.24. Keep in mind the variety of part types within our Engine Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Engine Parts for other Volvo V40 model years?

Yes, we currently carry Engine Parts for 4 model years of Volvo V40s between 2000 and 2004. Engine Parts are bought most frequently for the following model years: 2004, 2003, 2002, and 2000.

What are the cheapest Engine Parts for my 2001 Volvo V40?

The cheapest 2001 Volvo V40 Engine Parts we carry in stock are:

SEAL RING – COPPER (11263320) – $1.18
Turbo Oil Line O-Ring (10739011) – $2.15
Valve Stem Seal (10735693) – $2.76
Oil Seal (18442664) – $2.79
T-Belt Idler Pulley (11894338) – $3.09

What are the top-rated Engine Parts that fit the 2001 Volvo V40?

Out of 91 reviews by customers, our 2001 Volvo V40 Engine Parts have an average customer rating of . These are some of the highest-rated Engine Part types for the 2001 Volvo V40 and their top-rated products:

Engine Gaskets and Seals
- Camshaft Seal, Fluoropolymer/Viton (10900287) – $17.32

What types of Engine Parts do you sell for my 2001 Volvo V40?

As of 2/5/25, these are some of the most in-demand types of Engine Parts for a 2001 Volvo V40:

Can I get help with 2001 Volvo V40 Engine Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Volvo Engine Parts and more.

What is your return policy for Volvo V40 Engine Parts?

Advance Auto Parts keeps returns simple. For new Volvo V40 Engine Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Volvo V40 Engine Parts

Rotomaster – Turbocharger (Part No.M8040115R)

Felpro – CAMSHAFT FRONT SEAL SET (Part No.TCS 46038)

Victor Reinz – Engine Crankshaft Seal Kit (Part No.18-10070-01)

CRP – Valve Stem Seal (Part No.A8070130824)

Ajusa – Oil Cooler Seal (Part No.A6310230396AJU)

Dorman – Boost Pressure Solenoid (Part No.667-107)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.26583 PT)

Dayco – Premium Timing Belt, 53.27 Inch With 142 Round Tooth (Part No.95311)

APA/URO – Timing Belt Tensioner (Part No.A5030138270APA)

MTC – Intercooler Hose (Part No.B4041377481MTC)

Dorman – Engine Oil Pan: Direct Fit, Aluminum, Center Sump, 5.7 Quart (Part No.264-297)

Febi – Camshaft Adjuster So (Part No.A5132319812FEB)

Ruville – INA / Ruville Timing Belt Kit (Part No.A5006385425INA)

Professional Parts Sweden – Main Bearing Set (Part No.A2010389906PPS)

National – Shaft Repair Sleeve (Part No.99333)

Kolbenschmidt – Intake Valve (Part No.A4060130808KS)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72908)

Driveworks – Oil Seal (Part No.S-223750)

Elwis – Turbo Oil Line O-Ring (Part No.B4013385541ELW)

Meyle – Meyle Engine Mount (Part No.A7000135598MEY)

Dayco – Timing Belt Kit With Water Pump (Part No.WP311K1BS)

INA – Timing Belt Tensioner (Part No.A5030394219INA)

GMB – Timing Belt Idler (Part No.A529190874GMB)

Elwis – Turbo Drain Gasket (Part No.B4029379007ELW)

Corteco – Decoupled Crankshaft Pulley (Part No.A2080378602CFW)

Professional Parts Sweden – Professional Parts Sweden Cam Plug (Part No.A8031168403PPS)

Febi – Cylinder Head Bolt (Part No.A3030127686FEB)

Felpro – Engine Camshaft Seal Kit (Part No.TCS 46039)

National – Shaft Repair Sleeve (Part No.99147)

National – Multi Purpose Seal (Part No.223830)

Carquest Premium – A/C Compressor Cut-Out Switch Harness Connector (Part No.ABA3459)

Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.ABA3461)

FAE – Camshaft Position Se (Part No.A4015178655FAE)

National – Shaft Repair Sleeve (Part No.99114)

Carquest Premium – Engine Camshaft Position Sensor (Part No.CSA1795)

Autopart International Inc – Camshaft Position Se (Part No.A40152063727API)

Autopart International Inc – Camshaft Seal (Part No.A80801963861API)

Victor Reinz – Engine Camshaft Seal (Part No.81-37186-00)

National – Shaft Repair Sleeve (Part No.99179)

Victor Reinz – ENGINE CAMSHAFT SEAL (Part No.81-33636-00)

Beck/Arnley – Camshaft Seal (Part No.052-4003)

Victor Reinz – Engine Camshaft Seal Kit (Part No.19-10234-01)

Corteco – Camshaft Seal (Part No.A8080105746CFW)

Corteco – Camshaft Seal, OE Fluoropolymer/Viton (Part No.A8080105745CFW)

Beck/Arnley – Camshaft Seal (Part No.052-4002)

Professional Parts Sweden – Professional Parts Sweden Cam Plug (Part No.A8031168403PPS)

Felpro – Engine Cylinder Head Bolt Set (Part No.ES 72908)

Felpro – Cylinder Head Gasket: Composite, Without Head Bolts (Part No.26641 PT)

Felpro – Cylinder Head Gasket Set (Part No.HS 26641 PT)

Felpro – Cylinder Head Gasket Set (Part No.HS 26641 PT-1)

Elwis – Cylinder Head Gasket Set (Part No.A8010237870ELW)

Mahle – Cyl. Head Bolt Set (Part No.A30313331485MAH)

AE – Federal Mogul Exhaust Valve (Part No.A4050136470AE)

AE – Federal Mogul Exhaust Valve (Part No.A405090954AE)

CRP – Intake Valve (Part No.A4060130808CRP)

Victor Reinz – Engine Cylinder Head Gasket (Part No.61-36995-00)

Kolbenschmidt – Intake Valve (Part No.A4060130808KS)

Febi – Cylinder Head Bolt (Part No.A3030127686FEB)

Anchor – Engine Mount: Front Right, 1 Piece (Part No.9745)

Anchor – Engine Mount: Front, 1 Piece (Part No.9596)

Corteco – Corteco Engine Mount (Part No.A7000135598CFW)

APA/URO – APA/URO Engine Mount (Part No.A7000135601APA)

Meyle – Meyle Engine Mount (Part No.A7000135598MEY)

MTC – Engine Mount Bracket (Part No.A7010140789MTC)

Professional Parts Sweden – Engine Mount (Part No.A7000135598PPS)

Professional Parts Sweden – Engine Mount (Part No.A7000182981PPS)

Anchor – Engine Mount: Rear, 1 Piece (Part No.9597)

Meyle – Meyle Engine Mount (Part No.A7000182979MEY)

Febi – Engine Mount (Part No.A7000182979FEB)

Corteco – Camshaft Seal, Fluoropolymer/Viton (Part No.A808057668CFW)

Felpro – Engine Oil Cooler Gasket Set (Part No.ES 72445)

National – Shaft Repair Sleeve (Part No.99333)

Victor Reinz – Engine Valve Stem Oil Seal Set (Part No.12-26058-04)

Elring – Gasket Maker (Part No.3K2003330627ELR)

Felpro – REAR MAIN BEARING SEAL SET (Part No.BS 40677)

Corteco – Valve Stem Seal Kit (Part No.A8069847089CFW)

Mahle – Camshaft Seal (Part No.A808057668MAH)

Meistersatz – Valve Stem Seal (Part No.A807012825MEI)

Elring – Valve Stem Seal (Part No.A8070499153ELR)