2001 Toyota Tacoma Towing Products
Find Your Specific 2001 Toyota Tacoma Towing Products
Below you will find various in-demand Toyota Towing Products, components and accessories for your 2001 Tacoma. Advance Auto Parts has popular Tacoma parts like Winches, Trailer and Towing Accessories, Trailer Wirings and more. You’ll also find aftermarket and OEM Towing Products for other Tacoma model years including
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022,
2023 and more. Select a category of 2001 Toyota Tacoma Towing Products below and start saving instantly.
Popular 2001 Toyota Tacoma Towing Products Categories
Essential Towing Products for 2001 Toyota Tacomas
Milemarker – HI9000; Hydraulic Winch (Part No.75-50085C)
from
$1806.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
Milemarker – HI12000; Hydraulic Winch (Part No.75-52000C)
from
$1971.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty. Adapter sold separately, required for install.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
Milemarker – HI10500; Hydraulic Winch (Part No.75-50050C)
from
$1886.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)
from
$46.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Product Features:
See More
Product Features:
- Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
- Fits USCAR-equipped vehicles with factory tow plugs only
- Simple plug-and-play design eliminates the need for cutting or splicing
- 4-way flat output connects tail lights, brake lights and turn signals
- 6-way round socket adds connection for electric brakes and auxiliary power
- Dust covers included to keep connectors clean when not in use
- Slit loom keeps wires contained and well protected
- Metal bracket securely mounts wiring to the vehicle or trailer hitch
Hopkins – 43315, TOYOTA Vehicle Specific Towing Wiring Kit (Part No.43315)
from
$51.99
Don’t splice onto your vehicle’s factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicle’s independent lights to the trailer’s common lights. Required accessories are included to get you towing faster.
Product Features:
See More
Product Features:
- Plug-In Simple!® Wiring Kit
- Utilizes OEM connectors for enhanced fit and weatherproofing
- Includes vehicle side 4 flat
- Corrosion resistant terminals
- Impact and corrosion resistant
- Includes dust cover and grease packet to prevent corrosion
- Includes Step-By-Step Instructions
CURT – Dual-Output 7/4-Way Connector (Plugs into USCAR) (Part No.55774)
from
$31.49
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Product Features:
See More
Product Features:
- Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
- Fits USCAR-equipped vehicles with factory tow plugs only
- Simple plug-and-play design eliminates the need for cutting or splicing
- 4-way flat output connects tail lights, brake lights and turn signals
- 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
- Dust covers included to keep connectors clean when not in use
- Slit loom keeps wires contained and well protected
- Metal bracket securely mounts wiring to the vehicle or trailer hitch
Milemarker – Winch Hydraulic Fittings (Part No.35-5020-41)
from
$124.99
For use with 75 Series and HI Series winches.
Product Features:
See More
Product Features:
- Winch Hydraulic Fittings
CURT – Custom Wiring Harness (5-Way Flat Output) (Part No.56513)
from
$114.99
A CURT custom wiring harness (also called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring harnesses come into play. Custom wiring harnesses plug into your vehicle’s electrical system using original equipment (OEM) connectors. Our custom wiring harnesses use two or more OEM connectors to plug in at the taillight assembly and provide a standard trailer socket to allow a trailer to be plugged into your vehicle’s power system. This harness provides a 5-way flat connector socket and comes with a circuit-protected converter. It is designed to be a custom wiring harness for certain years of the Toyota T-100 pickup or Toyota Tacoma (including X-Runner and Pre-Runner) (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). CURT custom wiring harnesses are long-lasting and quick to install. They come with dust covers to keep your connector clean when not in use and feature a one-year limited warranty to give you peace of mind.
Product Features:
See More
Product Features:
- Plugs into vehicle tail light assembly to provide a 5-way flat socket
- Simple plug-and-play design eliminates the need for cutting or splicing
- 5-way flat connects tail lights, brake lights, turn signals and reverse lights
- Equipped with tail light converter for vehicle-trailer compatibility
- Constructed with SMT circuitry for better performance and durability
- Dust cover included to keep connector clean when not in use
CURT – Replacement OE 4-Way Flat Socket (Plugs into USCAR) (Part No.55515)
from
$30.99
A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This custom wiring connector provides a 4-way flat connector socket and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.
Product Features:
See More
Product Features:
- Plugs into USCAR socket to provide 4-way flat trailer wiring connector
- Simple plug-and-play design eliminates the need for cutting or splicing
- 4-way flat output connects tail lights, brake lights and turn signals
- Dust cover included to keep connector clean when not in use
- Slit loom keeps wires contained and well protected
- Backed by a limited one-year warranty
CURT – Heavy-Duty Replacement OE 7-Way RV Blade Socket (Plugs into USCAR) (Part No.55416)
from
$20.99
Like trailer hitches and ball mounts, electrical connectors range all over the board in shape, size and capability, but no matter what your trailer’s electrical functions are, you need a solid connection to keep the power flowing and ensure safety on the road. CURT electrical connectors are designed and manufactured to give you a reliable connection every time you plug in your trailer. This 7-way RV blade connector is designed to plug into a USCAR socket and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It is intended to be a replacement trailer wiring connector, plugging into a standard USCAR socket (see application info to verify fitment with your vehicle). It features rust-free black plastic construction and comes with a spring-loaded cover to keep out dust and water. This 7-way RV blade connector is a female-end socket, specifically designed for the vehicle side of the connection (see application info to verify fitment with your vehicle).
Product Features:
See More
Product Features:
- Weather-resistant dust cover features a rubber insert to seal out moisture
- Spring-loaded cover also helps keep connector clean when not in use
- Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector
- Simple plug-and-play design eliminates the need for cutting or splicing
- 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power
Carquest Premium – Trailer Connector Kit (Part No.TCA1207)
from
$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Husky Towing – Class Iii, Square Tube, 2" Receiver, 5K Lb Capacity/ 500 Lb Tongue Weight (Part No.69472C)
from
$246.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.
Product Features:
See More
Product Features:
- Manufactured With A Vehicle-Specific Design For A Custom Fit
- Precisely-Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
CURT – Toyota Tacoma Front Mount Hitch – 5,000 lb. Capacity (Part No.31013)
from
$194.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota Tacoma (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
CURT – Trailer Hitch: 2" Receiver, 6,000 LB Capacity, Installs as low as 30 Mins (Part No.13264)
from
$199.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 6,000 lbs. GTW and 900 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 8,000 lbs. WD and 900 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 6,000 lbs. gross trailer weight and 900 lbs. tongue weight
- Compatible with weight distribution hitch (8,000 lbs. WD / 900 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
Husky Towing – Class Iii, Square Tube, 2"Receiver, 6000Lb Weight Carrying, 900Lb Tongue Weight (Part No.69545C)
from
$289.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.
Product Features:
See More
Product Features:
- Manufactured With A Vehicle-Specific Design For A Custom Fit
- Precisely-Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
Milemarker – Winch Cradle (Part No.60-06495)
from
$249.99
Fits a 2 inch receiver hitch. Can be used in the front, back, or on another vehicle.
Product Features:
See More
Product Features:
- Winch Cradle
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.103991-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.103992-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.104501)
from
$161.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Todays Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Non-Extendable, Stationary, Aluminum (Part No.104502)
from
$157.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Powder Coated, Black, Aluminum (Part No.124501)
from
$285.99
The stylish and innovative design of these steps add to a vehicle rugged off road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Diamond Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
Upgrade your 2001 Toyota Tacoma with Top-Quality Towing Products
When it comes to maintaining or upgrading your 2001 Toyota Tacoma, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Towing Products are key to keeping your Tacoma functioning at its best. At Advance Auto Parts, we offer a wide selection of 17 Towing Products for the 2001 Toyota Tacoma, designed to meet your needs without breaking the bank.
From
Winch
replacements to
Trailer and Towing Accessories
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 2001 Toyota Tacoma at great prices.
Our Towing Products inventory for this model
ranges from just $18.79 to $1,971.99, with
an average price of $500.42.
Our 17 Towing Products in stock come from 5 trusted brands, so you’re sure to find the right part for your 2001 Toyota Tacoma without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Toyota Tacoma, we stock popular OEM and aftermarket Towing Products from top names
like Hopkins, and more.
Hopkins Towing Products
start at just $18.79 and boast an impressive 4 stars average rating from customers.
With 85 customer reviews and counting, our 2001 Toyota Tacoma Towing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2001 Toyota Tacoma is always ready to roll. We’re committed to providing you with everything you need to keep your Tacoma in top shape, all in one place.
Start shopping confidently below for your 2001 Toyota Tacoma!
Best-Selling Winches for 2001 Toyota Tacomas
Enhance the driving experience in your Toyota with 2 quality Winch components, starting at $124.99.
Milemarker – Winch Cradle (Part No.60-06495)
from
$249.99
Fits a 2 inch receiver hitch. Can be used in the front, back, or on another vehicle.
Product Features:
See More
Product Features:
- Winch Cradle
Milemarker – Winch Hydraulic Fittings (Part No.35-5020-41)
from
$124.99
For use with 75 Series and HI Series winches.
Product Features:
See More
Product Features:
- Winch Hydraulic Fittings
Most Popular 2001 Toyota Tacoma Trailer and Towing Accessories
Customize your Toyota with 3 Trailer and Towing Accessories products
like Winches, all
priced under $1,971.99.
Milemarker – HI10500; Hydraulic Winch (Part No.75-50050C)
from
$1886.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
Milemarker – HI12000; Hydraulic Winch (Part No.75-52000C)
from
$1971.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty. Adapter sold separately, required for install.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
Milemarker – HI9000; Hydraulic Winch (Part No.75-50085C)
from
$1806.99
Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.
Product Features:
See More
Product Features:
- Mounts To Front Of Vehicle
- Can Be Permanent Or Detachable
- Free spooling; Mechanical Lock
- Sealed Against Elements; Can Be Used Under Water
- Stainless Steel Tie Bars And Fasteners
- Reversible Mounting
- Limited Warranty
Top Picks for 2001 Toyota Tacoma Trailer Wiring
Upgrade Toyota Tacomas with top-quality Trailer Wiring parts, including 3 OEM and aftermarket selections for your 2001 model.
Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)
from
$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.
Product Features:
See More
Product Features:
- 60 inch length
- Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
- Double-molded weatherproof design
- Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
- Includes 4 wire flat extension
- Includes vehicle side 4 flat
- Includes dust cover and grease packet to prevent corrosion
- Includes Dust Cover And Grease Packet To Prevent Corrosion
Hopkins – 43315, TOYOTA Vehicle Specific Towing Wiring Kit (Part No.43315)
from
$51.99
Don’t splice onto your vehicle’s factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicle’s independent lights to the trailer’s common lights. Required accessories are included to get you towing faster.
Product Features:
See More
Product Features:
- Plug-In Simple!® Wiring Kit
- Utilizes OEM connectors for enhanced fit and weatherproofing
- Includes vehicle side 4 flat
- Corrosion resistant terminals
- Impact and corrosion resistant
- Includes dust cover and grease packet to prevent corrosion
- Includes Step-By-Step Instructions
CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55379)
from
$75.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota pickup and Tacoma (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.
Product Features:
See More
Product Features:
- Plugs into vehicle tail light assembly to provide a 4-way flat socket
- Simple plug-and-play design eliminates the need for cutting or splicing
- 4-way flat output connects tail lights, brake lights and turn signals
- Equipped with tail light converter for vehicle-trailer compatibility
- Constructed with SMT circuitry for better performance and durability
- Dust cover included to keep connector clean when not in use
In-Demand Trailer Hitches for 2001 Toyota Tacomas
Select from 9 premium Trailer Hitches parts for your 2001 Toyota Tacoma, with prices ranging from $18.79 to $329.99.
CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins (Part No.13013)
from
$209.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Tacoma (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
- Engineered with a vehicle-specific design for a custom fit
- Concealed main body for OE look and seamless integration with the vehicle
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable high-gloss black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
- Made in USA (may include imported hardware)
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.103991-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Set Of 2, Flat Step, Polished Aluminum, 14" L (Part No.114032)
from
$279.99
LD step will give the user easier access to the vehicle due to the wider and deeper stepping surface which extends further than our other steps. The LD step is available in our three durable finishes, and installation is a cinch with our mounting system.
Product Features:
See More
Product Features:
- Easier Entry And Exit From Your Vehicle
- Wide Functional Step Area
- Extends Further Than Our Current Steps
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy For Extreme Longevity
- New Aggressive And Appealing Tread Design For A Non-Slip Surface
- Unique Design That Enhances The Looks Of Current Vehicle Body Styles
- Resists Scratches, Peeling And Fading
- Rocker Panel Installation Provides For The Strongest And Easiest Installation Of Any Step Products
CURT – Toyota Tacoma Front Mount Hitch – 5,000 lb. Capacity (Part No.31013)
from
$194.99
A CURT front trailer hitch allows you to use the front end of your vehicle for a variety of towing applications. They can be used for mounting a winch, a snow plow, a number of towing accessories and can even be used for some trailering applications. When space is limited, a front trailer hitch is commonly used to hold a cargo carrier, freeing up space inside the vehicle for extra cargo and making the rear mount receiver available to pull a trailer. At the boat ramp, your boat trailer can be hitched up to the front receiver hitch, giving you better control over the trailer as you launch. Some of the other accessories that can be used with a front tow hitch are the CURT winch mount, step pad, license plate holder, spare tire mount, skid shield and tow hooks. All CURT front trailer hitches provide a useful receiver tube to accept a 2″ x 2″ shank, and they are commonly used on trucks, vans and SUVs. This front trailer hitch is rated for 5,000 lbs. GTW and 500 lbs. TW. It also has a straight-line pull rating of 9,000 lbs. It is designed to be a custom trailer hitch for certain years of the Toyota Tacoma (to verify your vehicle compatibility, see application info). It comes with all necessary hardware for a complete installation and is backed by a limited lifetime warranty.
Product Features:
See More
Product Features:
- Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
- Compatible with a tow hook or shackle mount (9,000 lbs. straight-line pull)
- Made with a vehicle-specific design for a custom fit
- Provides a convenient mount for hitch accessories
- Ideal for attaching a snow plow, cargo carrier or other front hitch mount
- Allows for easy maneuvering of a trailer into a tight spot
- Tested for safety in accordance with SAE J684
- Precisely welded for superior strength and fit
- Protected by a durable black powder coat finish
- Co-cured in a rust-resistant liquid A-coat, inside and out
- Equipped with an open-back receiver for easy cleaning
Husky Towing – Class Iii, Square Tube, 2" Receiver, 5K Lb Capacity, 6K Lb Distributing Capacity (Part No.69553C)
from
$329.99
Husky receiver hitches are design engineered and precision welded with a seamless collar for strength and reliability. Each hitch features an open back receiver for easy cleaning and is protected inside and out with an industry-leading rust-resistant finish. All Husky receiver hitches are rigorously tested to meet SAE J684 standards for safety. With a full line of unique applications, Husky receiver hitches offer a custom fit solution for nearly every vehicle on the road today.
Product Features:
See More
Product Features:
- Manufactured With A Vehicle-Specific Design For A Custom Fit
- Precisely-Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)
from
$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.
Product Features:
See More
Product Features:
- 60 in. Long
- Adapts Tow Vehicles Taillight System To The Trailers
- Powers Up To 2.1 Amps Per Output
- Double-Molded Weatherproof Design; Includes Dust Cover
- Corrosion Resistant Terminals
- Includes Splices And Terminal Grease
- Complete With Splices And Circuit Tester
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (Part No.124031-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Black Powder Coat Finish Features A Lightly Textured Matte Finish That Resists Scratching, Peeling And Fading
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.124032-1)
from
$148.99
The stylish and innovative design of these steps add to a vehicle rugged off-road look. Available in three low maintenance, extremely durable finishes to complement your vehicle appearance. Easily installed using our new multi mount system for superior strength and rigidity. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
CARR – Cab Mount, Multi-Fit, Single, Flat Step, Polished Aluminum (Part No.103992-1)
from
$76.99
Uniquely designed diamond tread pattern provides a safe non slip surface on the flat step area. Our exclusive multi mount system is designed for precision fit and easier installation. Constructed of an extremely strong die cast aluminum alloy for the ultimate in quality and durability. Rocker panel installation provides for the strongest and easiest installation of any step products.
Product Features:
See More
Product Features:
- Exclusive New Multi Mount System
- Made Of Corrosion Resistant, Durable Cast Aluminum Alloy
- Rugged Tread Pattern Provides For Safe And Attractive Non Slip Surface
- Unique Design Gives The Vehicle A Rugged Off-Road Look, While Being A Stylish Accent For Today Vehicles
- Strong Construction To Hold Up Under Extreme Conditions
- Mechanical Polished Finish That Will Not Rust, Crack Or Peel And Requires Very Little Maintenance
- Strongest And Easy Installation
Top-Rated Towing Products Brands For Your 2001 Toyota Tacoma
Shop for the best-rated brands offering Towing Products and other products for your 2001 Toyota Tacomas. Below you’ll find some of our best rated Towing Products from Hopkins, and more. Towing Products from these brands that fit a 2001 Tacoma start at just $18.79 and are rated as high as 4 stars. OEM and aftermarket Towing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular Hopkins 2001 Toyota Tacoma Towing Products
When it comes to maintaining or upgrading your 2001 Toyota Tacoma, using quality Towing Products is essential to ensure durability and a perfect fit. Hopkins ticks all of those boxes. We offer a wide selection of Hopkins Towing Products, specifically designed for the 2001 Toyota Tacoma. With over 3 Hopkins brand Towing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.79, with an average price of just $36.92. Plus, with over 17 customer reviews and an average rating of 4 stars, you can trust that our Hopkins Towing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$51.99
$51.99
(1)
43315, TOYOTA Vehicle Specific Towing Wiring Kit
“ease of use is great and fast to install”
from
$39.99
$39.99
(16)
46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)
“The splice connectors were better than expected, easy to use. Love the included tester, takes guess work out of it. Made for an easy install and every”
FAQs for 2001 Toyota Tacoma Towing Products
Which Towing Products are best-sellers for 2001 Toyota Tacomas?
Out of 17 Towing Products that fit 2001 Toyota Tacomas, the following parts are the top sellers:
- Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 60 Mins (22080271) – $209.99
- Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (11949352) – $76.99
- Custom Wiring Harness (4-Way Flat Output) (22011536) – $75.99
What’s the price range for 2001 Toyota Tacoma Towing Products?
Towing Product prices for the 2001 Toyota Tacoma start at $18.79 and go up to $1,971.99 for the most premium parts.
What’s the average price of a Towing Product for a 2001 Toyota Tacoma?
The average price for Towing Products for the 2001 Toyota Tacoma is $500.42. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Towing Products for other Toyota Tacoma model years?
What are the cheapest Towing Products for my 2001 Toyota Tacoma?
The cheapest 2001 Toyota Tacoma Towing Products we carry in stock are:
- LITE MATE 3-2 CONVTR (89013192) – $18.79
- 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99
- 43315, TOYOTA Vehicle Specific Towing Wiring Kit (6400014) – $51.99
- Custom Wiring Harness (4-Way Flat Output) (22011536) – $75.99
- Cab Mount, Multi-Fit, Single, Flat Step, Powder Coated, Black, Aluminum (11949352) – $76.99
What are the top-rated Towing Products that fit the 2001 Toyota Tacoma?
Out of 85 reviews by customers, our 2001 Toyota Tacoma Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 2001 Toyota Tacoma and their top-rated products:
- Trailer Wiring
- 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99
- 43315, TOYOTA Vehicle Specific Towing Wiring Kit (6400014) – $51.99
What types of Towing Products do you sell for my 2001 Toyota Tacoma?
As of 2/5/25, these are some of the most in-demand types of Towing Products for a 2001 Toyota Tacoma:
Can I get help with 2001 Toyota Tacoma Towing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Towing Products and more.
What is your return policy for Toyota Tacoma Towing Products?
Advance Auto Parts keeps returns simple. For new Toyota Tacoma Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
