2001 Toyota Sienna Towing Products

Essential Towing Products for 2001 Toyota Siennas

DENSO – Relay (Part No.567-0018)

Relay

from

$31.49
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.
See More

CURT – Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.13511)

Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$259.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Compatible with weight distribution hitch (4,000 lbs. WD / 400 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Hopkins – Vehicle Wiring Kit (Part No.43475)

Vehicle Wiring Kit

from

$38.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicles independent lights to the trailers common lights. Required accessories are included to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1364)

Trailer Connector Kit

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55580)

Custom Wiring Harness (4-Way Flat Output)

from

$74.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1207)

Trailer Connector Kit

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55418)

Custom Wiring Harness (4-Way Flat Output)

from

$52.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.56261)

Custom Wiring Harness (4-Way Flat Output)

from

$90.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

CURT – Toyota Sienna Custom Trailer Wiring Harness (4-Way Flat) (Part No.56106)

Toyota Sienna Custom Trailer Wiring Harness (4-Way Flat)

from

$54.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

Hopkins – Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A (Part No.46255)

Trailer Tail Light Converter: Protects Vehicle Electronics, Powers up to 5.0A

from

$70.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights.

Product Features:
  • For vehicles equipped with independent bulb turn signals or common bulb systems
  • Protects tow vehicle electronics from wiring shorts
  • Includes 14 ga. power lead wire, fuse & fuse assembly, splices, and cable ties
  • Powers up to 5.0 amps per output
  • Receives power directly from the battery
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – Connector (Part No.46365)

Connector

from

$99.99
Many of today’s vehicles do not possess the electrical means for powering the extra voltage requirements of a trailer. Power Taillight Converters units completely isolate the tow vehicle from trailer malfunctions. Power is taken directly from the battery for isolation and brighter trailer tail lights. The Short-Proof Power Taillight Converter is also a self-resetting power converter that will reset after the short has been fixed in the trailer wiring, providing extra protection for the vehicle wiring.

Product Features:
  • For Vehicles w/Independent Bulb Turn Signals/Common Bulb System
  • Protects Tow Vehicle Electronics And Itself From Wiring Shorts
  • Self-Resetting
  • Includes 12 Ga. Power Lead Wire
  • Includes Fuse/Fuse Assembly/Splices/Cable Ties
  • Powers Up To 8.0 Amps Per Output
  • Receives Power Directly From The Battery
  • Includes Vehicle Side 4 Flat
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Upgrade your 2001 Toyota Sienna with Top-Quality Towing Products

When it comes to maintaining or upgrading your 2001 Toyota Sienna, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Toyota or enhancing its overall performance, Towing Products are key to keeping your Sienna functioning at its best. At Advance Auto Parts, we offer a wide selection of 9 Towing Products for the 2001 Toyota Sienna, designed to meet your needs without breaking the bank. From Trailer Wiring replacements to Trailer Brake Control Parts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Towing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Towing Products for your 2001 Toyota Sienna at great prices. Our Towing Products inventory for this model ranges from just $12.99 to $259.99, with an average price of $68.57. Our 9 Towing Products in stock come from 4 trusted brands, so you’re sure to find the right part for your 2001 Toyota Sienna without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Toyota Sienna, we stock popular OEM and aftermarket Towing Products from top names like Hopkins CURT, and more. Hopkins Towing Products start at just $18.79 and boast an impressive 4 stars average rating from customers. With 51 customer reviews and counting, our 2001 Toyota Sienna Towing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Towing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Toyota Sienna is always ready to roll. We’re committed to providing you with everything you need to keep your Sienna in top shape, all in one place. Start shopping confidently below for your 2001 Toyota Sienna!

Best-Selling Trailer Wiring for 2001 Toyota Siennas

Enhance the driving experience in your Toyota with 6 quality Trailer Wiring components, starting at $12.99.

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

from

$39.99
The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:
  • 60 inch length
  • Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
  • Double-molded weatherproof design
  • Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
  • Includes 4 wire flat extension
  • Includes vehicle side 4 flat
  • Includes dust cover and grease packet to prevent corrosion
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
See More

Hopkins – Vehicle Wiring Kit (Part No.43475)

Vehicle Wiring Kit

from

$38.99
Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins® vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit provides a taillight converter that adapts the vehicles independent lights to the trailers common lights. Required accessories are included to get you towing faster.

Product Features:
  • Plug-In Simple® Wiring Kit
  • Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
  • Includes Vehicle Side 4 Flat
  • Corrosion Resistant Terminals
  • Impact And Corrosion Resistant
  • Includes Dust Cover And Grease Packet To Prevent Corrosion
  • Includes Step-By-Step Instructions
See More

Carquest Premium – Trailer Connector Kit (Part No.TCC1251)

Trailer Connector Kit

from

$78.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

CURT – Custom Wiring Harness (4-Way Flat Output) (Part No.55418)

Custom Wiring Harness (4-Way Flat Output)

from

$52.99
If your vehicle is not equipped with wiring for towing a trailer, CURT custom wiring is the ideal solution. A custom wiring harness — also called a T-connector — is a simple, plug-and-play electrical device that plugs into your automotive electric system and provides a standard, universal trailer wiring connection. This is done using two or more vehicle-specific, OEM-compatible connectors to plug into the taillight assembly, eliminating the need for cutting, splicing and soldering during installation. Custom wiring harnesses are made vehicle-specific, and while they are not available for all vehicles, they do offer one of the fastest, easiest and most secure ways to wire a vehicle for towing. This particular plug-in harness provides a 4-way flat connector socket and is designed to be a custom wiring harness to fit certain years of the Toyota Sienna (to verify your vehicle compatibility, see application info). It comes with all necessary wiring components to establish a reliable trailer wiring connection, as well as a dust cover to keep the connector clean when not in use. You have a picture in mind of your next destination — maybe it’s the boat landing at your favorite fishing spot, maybe it’s a campsite that overlooks one of nature’s masterpieces, or maybe it’s the next big jobsite. However, turning that picture into a reality takes more than just daydreaming. It takes a solid connection and the right amount of power. CURT custom wiring is made with some of the most sophisticated technology in the industry and is designed to install with ease, giving you a long-lasting electrical connection for your towing hitch setup.

Product Features:
  • Plugs into vehicle tail light assembly to provide a 4-way flat socket
  • Simple plug-and-play design eliminates the need for cutting or splicing
  • 4-way flat output connects tail lights, brake lights and turn signals
  • Equipped with tail light converter for vehicle-trailer compatibility
  • Constructed with SMT circuitry for better performance and durability
  • Dust cover included to keep connector clean when not in use
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1364)

Trailer Connector Kit

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Trailer Connector Kit (Part No.TCA1207)

Trailer Connector Kit

from

$12.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Most Popular 2001 Toyota Sienna Trailer Brake Control Parts

Customize your Toyota with 1 Trailer Brake Control Parts products like Electronic Brake Control Relays, all priced under $31.49.

DENSO – Relay (Part No.567-0018)

Relay

from

$31.49
DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.
See More

Top Picks for 2001 Toyota Sienna Trailer Hitches

Upgrade Toyota Siennas with top-quality Trailer Hitches parts, including 2 OEM and aftermarket selections for your 2001 model.

CURT – Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins (Part No.13511)

Trailer Hitch: 2" Receiver, 3,500 LB Capacity, Installs as low as 30 Mins

from

$259.99
Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Sienna (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 3,500 lbs. GTW and 350 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 4,000 lbs. WD and 400 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:
  • Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight
  • Compatible with weight distribution hitch (4,000 lbs. WD / 400 lbs. WDTW)
  • Engineered with a vehicle-specific design for a custom fit
  • Concealed main body for OE look and seamless integration with the vehicle
  • Tested for safety in accordance with SAE J684
  • Precisely welded for superior strength and fit
  • Protected by a durable high-gloss black powder coat finish
  • Co-cured in a rust-resistant liquid A-coat, inside and out
  • Equipped with an open-back receiver for easy cleaning
  • Made in USA (may include imported hardware)
See More

Hopkins – LITE MATE 3-2 CONVTR (Part No.48915)

LITE MATE 3-2 CONVTR

from

$18.79
Many of today’s tow vehicles are equipped with separate brake lights and turn signals, however, the trailers we tow still use the combined taillight for brake and turn. The 48915 taillight converter is designed to combine the independent vehicle brake light and turn signal and combine them for the common-bulb trailer lights. Includes a built-in 4 flat connector.

Product Features:
  • 60 in. Long
  • Adapts Tow Vehicles Taillight System To The Trailers
  • Powers Up To 2.1 Amps Per Output
  • Double-Molded Weatherproof Design; Includes Dust Cover
  • Corrosion Resistant Terminals
  • Includes Splices And Terminal Grease
  • Complete With Splices And Circuit Tester
See More

Top-Rated Towing Products Brands For Your 2001 Toyota Sienna

Shop for the best-rated brands offering Towing Products and other products for your 2001 Toyota Siennas. Below you’ll find some of our best rated Towing Products from Hopkins and CURT, and more. Towing Products from these brands that fit a 2001 Sienna start at just $18.79 and are rated as high as 4 stars. OEM and aftermarket Towing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular Hopkins 2001 Toyota Sienna Towing Products

When it comes to maintaining or upgrading your 2001 Toyota Sienna, using quality Towing Products is essential to ensure durability and a perfect fit. Hopkins ticks all of those boxes. We offer a wide selection of Hopkins Towing Products, specifically designed for the 2001 Toyota Sienna. With over 3 Hopkins brand Towing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $18.79, with an average price of just $32.59. Plus, with over 16 customer reviews and an average rating of 4 stars, you can trust that our Hopkins Towing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)
from
$39.99

(16)

46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals)

“The splice connectors were better than expected, easy to use. Love the included tester, takes guess work out of it. Made for an easy install and every”

LITE MATE 3-2 CONVTR
from
$18.79
This product is not rated

LITE MATE 3-2 CONVTR

“”

Vehicle Wiring Kit
from
$38.99
This product is not rated

Vehicle Wiring Kit

“”

Popular CURT 2001 Toyota Sienna Towing Products

CURT auto parts is one of the highest quality Towing Product brands in the market. Any 2001 Toyota Sienna owner should feel confident when installing genuine CURT parts in their vehicle. To ensure the best fit and performance for your 2001 Sienna, Advance Auto Parts carries a full inventory of 2 CURT Towing Products. Plus you will be keeping your Toyota in peak condition while saving money because prices on these CURT Towing Products range from $52.99 to $259.99, plus, with more than 1 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Towing Products below will deliver on both quality and value.

Custom Wiring Harness (4-Way Flat Output)
from
$52.99
This product is not rated

Custom Wiring Harness (4-Way Flat Output)

“”

FAQs for 2001 Toyota Sienna Towing Products

Which Towing Products are best-sellers for 2001 Toyota Siennas?

Out of 9 Towing Products that fit 2001 Toyota Siennas, the following parts are the top sellers:

What’s the price range for 2001 Toyota Sienna Towing Products?

Towing Product prices for the 2001 Toyota Sienna start at $12.99 and go up to $259.99 for the most premium parts.

What’s the average price of a Towing Product for a 2001 Toyota Sienna?

The average price for Towing Products for the 2001 Toyota Sienna is $68.57. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Towing Products for other Toyota Sienna model years?

Yes, we currently carry Towing Products for 24 model years of Toyota Siennas between 1998 and 2022. Towing Products are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Towing Products for my 2001 Toyota Sienna?

The cheapest 2001 Toyota Sienna Towing Products we carry in stock are:

What are the top-rated Towing Products that fit the 2001 Toyota Sienna?

Out of 51 reviews by customers, our 2001 Toyota Sienna Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 2001 Toyota Sienna and their top-rated products:

What types of Towing Products do you sell for my 2001 Toyota Sienna?

Can I get help with 2001 Toyota Sienna Towing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Towing Products and more.

What is your return policy for Toyota Sienna Towing Products?

Advance Auto Parts keeps returns simple. For new Toyota Sienna Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.