Essential Towing Products for 2001 Toyota Land Cruisers

from

$31.49

DENSO+s First Time Fit relays are no different from the OE relays DENSO has manufactured for over 60 years + built to be quiet, efficient, and reliable. Designed and manufactured to outlast the closest competitor by a minimum of ten times more life cycles, DENSO+s First Time Fit Relays will most likely out last your car. Holding approximately 30,000 active patents worldwide – approximately 7,300 in the United States – DENSO is going all out to design groundbreaking systems and components tuned especially to consumers’ specifications – whether they are drivers, passengers, pedestrians or society as a whole.

from

$1806.99

Mount to front of vehicle. Can be permanent or detachable. Free spooling and mechanical lock. Sealed against elements, can be used under water. Corrosion resistant. Stainless steel tie bars and fasteners. Reversible mounting. Limited warranty.

Product Features:

Mounts To Front Of Vehicle
Can Be Permanent Or Detachable
Free spooling; Mechanical Lock
Sealed Against Elements; Can Be Used Under Water
Stainless Steel Tie Bars And Fasteners
Reversible Mounting
Limited Warranty

from

$1971.99

Mounts To Front Of Vehicle
Can Be Permanent Or Detachable
Free spooling; Mechanical Lock
Sealed Against Elements; Can Be Used Under Water
Stainless Steel Tie Bars And Fasteners
Reversible Mounting
Limited Warranty

from

$1886.99

Mounts To Front Of Vehicle
Can Be Permanent Or Detachable
Free spooling; Mechanical Lock
Sealed Against Elements; Can Be Used Under Water
Stainless Steel Tie Bars And Fasteners
Reversible Mounting
Limited Warranty

from

$318.99

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Land Cruiser and Lexus LX450 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
Engineered with a vehicle-specific design for a custom fit
Tested for safety in accordance with SAE J684
Precisely welded for superior strength and fit
Protected by a durable high-gloss black powder coat finish
Co-cured in a rust-resistant liquid A-coat, inside and out
Equipped with an open-back receiver for easy cleaning
Made in USA (may include imported hardware)

from

$249.99

Whatever your task at hand — whether it’s launching that boat before daybreak, setting up your camper before the rush or getting a final load to the dump before close — CURT class 3 trailer hitches offer the strength needed for serious towing. They make it easy to hitch up and Bring It, offering a vehicle-specific fit and the weight capacity to handle a variety of trailers. Custom class 3 hitches are the most common type of receiver hitch for pickup trucks and SUVs. Because of their weight range, they are also found on full-size cars, crossovers and minivans. Each custom-fit class 3 hitch package is made for vehicle-specific mounting. This particular kit fits certain years of the Toyota Land Cruiser and Lexus LX470 (see application info to verify vehicle compatibility). It provides a weight carrying capacity of 5,000 lbs. GTW and 500 lbs. TW. It is also compatible with a weight distribution hitch for level towing and a rating of 6,000 lbs. WD and 600 lbs. WDTW. CURT class 3 trailer hitches are typically used to attach and haul utility trailers, boat trailers, campers, snowmobile or ATV haulers and more (NOTE: Never exceed the lowest-rated towing component). Each class 3 hitch has a 2″ receiver tube and is tested in accordance with SAE J684 for safety. To ensure that CURT class 3 receiver hitches have what it takes for serious trailering, they are designed using a hands-on approach and are constructed with rugged, high-strength steel and precise welding. We also protect our class 3 hitches in a co-cured finish of liquid A-coat and black powder coat for superior resistance to rust, chipping and UV damage.

Product Features:

Rated to 5,000 lbs. gross trailer weight and 500 lbs. tongue weight
Compatible with weight distribution hitch (6,000 lbs. WD / 600 lbs. WDTW)
Engineered with a vehicle-specific design for a custom fit
Tested for safety in accordance with SAE J684
Precisely welded for superior strength and fit
Protected by a durable high-gloss black powder coat finish
Co-cured in a rust-resistant liquid A-coat, inside and out
Equipped with an open-back receiver for easy cleaning
Made in USA (may include imported hardware)

from

$31.49

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application info to verify fitment). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors
Fits USCAR-equipped vehicles with factory tow plugs only
Simple plug-and-play design eliminates the need for cutting or splicing
4-way flat output connects tail lights, brake lights and turn signals
7-way RV blade socket adds reverse lights, electric brakes and auxiliary power
Dust covers included to keep connectors clean when not in use
Slit loom keeps wires contained and well protected
Metal bracket securely mounts wiring to the vehicle or trailer hitch

from

$39.99

The 46155 Universal Taillight Converter Kit has everything needed to make a vehicle equipped with independent turn signals tow ready. By including splice connectors and a circuit probe tester, this kit includes the extra tools required to complete the project.

Product Features:

60 inch length
Electronic Taillight Converter adapts tow vehicles taillight system to the trailer’s
Double-molded weatherproof design
Includes L.E.D. circuit tester, 3 splice connectors, cable ties, dust cover, ground screw, and grease packet
Includes 4 wire flat extension
Includes vehicle side 4 flat
Includes dust cover and grease packet to prevent corrosion
Includes Dust Cover And Grease Packet To Prevent Corrosion

from

$20.79

When your vehicle does not readily provide an electrical connection for hooking up your trailer, CURT electrical converts offer the solution. Working tail lights on your trailer are absolutely essential any time you tow, and a converter provides an effective way to properly equip your vehicle for safe towing. A CURT electrical converter, much like our custom vehicle-to-trailer wiring harnesses, provides a trailer connector on your vehicle by slicing into the vehicle’s electrical system. Electrical converters are designed to splice directly into the taillight wiring, rather than plugging into various sockets, giving them the nickname “taillight converters”. Though it requires a little extra work compared to a custom wiring harness, a tail light converter offers a reliable, long-term connector solution. This converter wiring kit is intended to be used with various CURT powered taillight converters. Powered converters require a direct connection to the vehicle’s battery, and the powered converter wiring kit #55151 provides all of the components needed to establish a secure connection. The kit includes 20 feet of 12 gauge wire, a 10-amp fuse, an in-line fuse holder, a 3/8″ ring terminal, a butt connector, a 14-1/2″ cable tie and eight 6″ cable ties. This wiring kit is rated at 10 amps and comes included with CURT powered electrical converters #59146, #59187, #59190, #59200 and #59201.

Product Features:

Routes power from vehicle battery to powered converter
Designed for use with battery-powered electrical converters
20′ of 12 gauge cross-linked wire for flexible installation

from

$46.49

A CURT custom wiring connector (sometimes called a T-connector) is a simple, plug-and-play electrical device that eliminates the need for cutting, splicing and soldering when installing vehicle-to-trailer wiring. Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT’s custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle’s electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use.

Product Features:

Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors
Fits USCAR-equipped vehicles with factory tow plugs only
Simple plug-and-play design eliminates the need for cutting or splicing
4-way flat output connects tail lights, brake lights and turn signals
6-way round socket adds connection for electric brakes and auxiliary power
Dust covers included to keep connectors clean when not in use
Slit loom keeps wires contained and well protected
Metal bracket securely mounts wiring to the vehicle or trailer hitch

from

$39.99

Tow more than one trailer? Multi-Tow® design feature adds multiple towing options from one connector by providing sockets for towing both 7 blade and 4 flat trailers. This connector is Plug-In Simple!® with no cutting or splicing, saving you time by utilizing an OEM connector to create an exact fit for easy installation and maximum weatherproofing.

Product Features:

Multi-Tow® provides multiple towing options from one connector
Plug-In Simple!® Wiring Kit
Utilizes OEM connectors create an exact fit and maximum weatherproofing
Includes mounting bracket and hardware
Impact and corrosion resistant
Fits in standard 7 blade bracket
Includes Step-By-Step Instructions

from

$25.99

Dont splice onto your vehicles factory wiring harness. Simply plug in this Hopkins? vehicle wiring kit featuring exact OEM matching connectors for a perfect weather-tight fit. This kit includes the accessories needed to get you towing faster.

Product Features:

Plug-In Simple? Wiring Kit
Utilizes OEM Connectors For Enhanced Fit And Weatherproofing
Includes Vehicle Side 4 Flat
Corrosion Resistant Terminals
Impact And Corrosion Resistant
Includes Dust Cover And Grease Packet To Prevent Corrosion
Includes Step-By-Step Instructions

FAQs for 2001 Toyota Land Cruiser Towing Products

Which Towing Products are best-sellers for 2001 Toyota Land Cruisers?

Out of 6 Towing Products that fit 2001 Toyota Land Cruisers, the following parts are the top sellers:

HI10500; Hydraulic Winch (99994595) – $1,886.99
HI12000; Hydraulic Winch (99994594) – $1,971.99
HI9000; Hydraulic Winch (99994596) – $1,806.99

What’s the price range for 2001 Toyota Land Cruiser Towing Products?

Towing Product prices for the 2001 Toyota Land Cruiser start at $31.49 and go up to $1,971.99 for the most premium parts.

What’s the average price of a Towing Product for a 2001 Toyota Land Cruiser?

The average price for Towing Products for the 2001 Toyota Land Cruiser is $997.91. Keep in mind the variety of part types within our Towing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Towing Products for other Toyota Land Cruiser model years?

Yes, we currently carry Towing Products for 50 model years of Toyota Land Cruisers between 1969 and 2021. Towing Products are bought most frequently for the following model years: 2021, 2020, 2019, 2018, 2017, 2015, 2014, 2013, and 2011.

What are the cheapest Towing Products for my 2001 Toyota Land Cruiser?

The cheapest 2001 Toyota Land Cruiser Towing Products we carry in stock are:

Relay (11949984) – $31.49
46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99
Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (22010794) – $249.99
HI9000; Hydraulic Winch (99994596) – $1,806.99
HI10500; Hydraulic Winch (99994595) – $1,886.99

What are the top-rated Towing Products that fit the 2001 Toyota Land Cruiser?

Out of 16 reviews by customers, our 2001 Toyota Land Cruiser Towing Products have an average customer rating of . These are some of the highest-rated Towing Product types for the 2001 Toyota Land Cruiser and their top-rated products:

Trailer Wiring
- 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (6253512) – $39.99

What types of Towing Products do you sell for my 2001 Toyota Land Cruiser?

As of 2/5/25, these are some of the most in-demand types of Towing Products for a 2001 Toyota Land Cruiser:

Can I get help with 2001 Toyota Land Cruiser Towing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Toyota Towing Products and more.

What is your return policy for Toyota Land Cruiser Towing Products?

Advance Auto Parts keeps returns simple. For new Toyota Land Cruiser Towing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Toyota Land Cruiser Towing Products

DENSO – Relay (Part No.567-0018)

Milemarker – HI9000; Hydraulic Winch (Part No.75-50085C)

Milemarker – HI12000; Hydraulic Winch (Part No.75-52000C)

Milemarker – HI10500; Hydraulic Winch (Part No.75-50050C)

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13089)

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13443)

CURT – Dual-Output 7/4-Way Connector (Plugs into USCAR) (Part No.55774)

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)

CURT – Powered Converter Wiring Kit (10 Amps) (Part No.55151)

CURT – Dual-Output 6/4-Way Connector (Plugs into USCAR) (Part No.55664)

Hopkins – 40955, Multi-Tow® FORD / GM 7 Blade and 4 Flat Wiring Kit (Part No.40955)

Hopkins – Plug-and-Play Towing Wiring Kit with OEM Connectors (Part No.41155)

DENSO – Relay (Part No.567-0018)

Milemarker – HI10500; Hydraulic Winch (Part No.75-50050C)

Milemarker – HI12000; Hydraulic Winch (Part No.75-52000C)

Milemarker – HI9000; Hydraulic Winch (Part No.75-50085C)

CURT – Trailer Hitch: 2" Receiver, 5,000 LB Capacity, Installs as low as 30 Mins (Part No.13443)

Hopkins – 46155, 4 Flat Universal Towing Connector Kit w/converter (independent bulb turn signals) (Part No.46155)