from

$23.49

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SUPERIOR SEAL — Manufactured with rubber compounds to ensure a consistent and long-life seal across the entire oil pan
PREVENTS OVERTIGHTENING — Torque limiters help eliminate overtightening and gasket splitting and extruding (where applicable)
OE-STYLE REPLACEMENT GASKET — Engineered for OE-style molded rubber gasket replacement
EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development
ENGINEERING EXPERTISE — Parts are designed, tested, validated and approved by Fel-Pro engineers through rigorous research and development

from

$38.49

Manufactured with tough, wear-resistant fabric, high-tensile strength cord and a molded tooth surface, the Dayco timing belt provides consistent slip-proof power transfer and high resistance to oil and engine heat. The belt features a molded cog design which runs quieter and is more economical and a premium, high modulus glass fiber cord that delivers precise length stability to keep the engine running smoothly over the life of the belt.

Product Features:

Designed for specific OHC and DOHC applications that range from normal service to high performance, high temperature engines
Offers noise reduction and minimum dimensional tolerances for precise valve timing
Engineered with reduced elongation for maximum durability, high abrasion resistance and better performance
This belt has a round tooth profile; designed to fit the timing sprockets precisely

from

$133.99

For use on the most popular passenger car, light commercial and four-wheel drive applications, Dayco harmonic balancers use special rubber compounds to dampen and remove engine harmonics and add to engine performance. Manufactured using a premium ductile iron casting and injection bonded dampening rubber, Dayco harmonic balancers offer engine builders and technicians the highest quality replacement to standard OEM balancers, which are typically made with press inserted dampening rubber. Dayco balancers utilize both inserted and pressure-bonded rubber to provide superior bonding strength between the inner and outer balancer rings, helping minimize spin and dislocation.

Product Features:

Designed as premium OEM replacement balancers for serpentine and V-belt drives
Manufactured with ductile iron casting and injection bonded dampening rubber
Engineered to offer superior bonding strength between the balancer rings

from

$142.99

Using new head bolts when performing a cylinder head installation is always a good idea however, on late-model engines that came from the factory with TTY (torque-to yield) head bolts, replacement is an absolute necessity. TTY bolts are designed to exert the maximum clamping force for a tight head gasket seal, however they permanently stretched and could fail if re-used.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Head bolt replacement recommended.
Torque-to-yield bolts are designed so that they can be elongated beyond their elastic limit into the plastic region without problems.

from

$3.99

This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$141.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco’s timing belt kits with water pump ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners, idler pulleys and water pumps – each matched to a specific vehicle make and model. In addition, the water pump features superior gaskets that retain bolt torque, a roller bearing hub and composite seals to prevent leaks.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
Includes premium Dayco components and a tough, wear-resistant belt

from

$289.99

Remanufactured precision machined OE crankshafts.

Product Features:

Includes matching rod and main bearings.
Journals Micropolished.
All units subject to complete quality inspection.

from

$32.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$100.75

ContiTech Timing Belt Kits come complete with all the synchronous parts needed to do a timing belt repair quickly and efficiently. Professional repair technicians only need one box to do the entire job. And drivers enjoy a safe and reliable product that stands the test of time. On average, it takes about 2-4 hours to do a timing belt repair whether professional repair technicians replace just the belt or all the corresponding parts at the same time. Since the time and difficulty is already allocated to do the repair, the return on labor hours is greater when changing the entire drive belt system. From the belt to the tensioner and/or idler, all ContiTech Timing Belt Kits contain only OE-quality components. In fact, many of ContiTech kits exceed OEM quality specifications.

Product Features:

OE-Equivalent and a direct fit application.
Precision molded teeth.
Low noise operation.
Resistant to high temperatures.
Durable long life performance.

from

$45.78

Camshaft Position Se

from

$167.99

Product Features:

Size: 3/4 in. x 10 in. x 12-1/4 in.
Medium duty applications
All except Chevrolet V8 applications
Two-pass design for increased cooling

from

$76.97

Crank Position Senso

from

$18.79

High quality OE replacement part with all components needed to complete the job

Product Features:

All the seals needed to complete the job
Compatible with both R12 and R134a refrigerants
Application specific
SUV and rear air applications

from

$23.00

ISHINO STONE® – Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Ishino Stone solution is to supply gaskets featuring a combination of different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications

from

$14.85

Camshaft Seal

from

$149.99

It is for good reason that virtually every top professional engine builder relies on ARP Pro Series head studs for their all-out competition power plants. Simply stated, there is not a better stud setup on the market today. For openers, ARP uses a premium grade 8740 alloy that is rated far superior to aircraft quality. Each stud is placed vertically in special racks and precisely heat-treated to 200,000 PSI. This procedure ensures complete heat penetration and the results are far superior to those lesser quality studs from other manufacturers who just dump pieces in a basket and hope for the best.

Product Features:

Better Fatigue Strength
Provide More Accurate And Consistent Torque
Premium Quality Heat Treated 8740 Chrome Moly Steel Head Stud
Centerless Ground To Make It As Close To Perfectly Concentric As Possible

from

$3.90

Valve Stem Seal

from

$79.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

PROPRIETARY COATING – Exclusive coating helps withstand rougher sealing surface finishes up to 80 Ra
SUPERIOR SEAL – Precise embossed sealing beads at all vital areas to eliminate leak paths
MULTI-LAYERED STEEL CONSTRUCTION – Multiple layers of stainless steel maintain sealing stress and accommodate head lift

from

$231.05

WARNING: This item cannot be returned for a replacement or refund if opened! ISHINO STONE® – Corteco Ishino Corporation of Japan – has been manufacturing gaskets since 1932 and tier-1 OEM supplier to Toyota, Honda and other Japanese auto manufacturers. The Corteco Ishino solution is to supply gaskets featuring a combination of different metals with different elastomer layers, carefully adapted to complement each other and preserve the integrity of the seal.

Product Features:

Superb quality and precision manufacturing process to ensure overall sealing dependability
Static sealing solutions are guaranteed to supply strong sealing power to eliminate any leakage
Manufactured to exact OEM specifications
Most gasket sets include components needed for a complete overhaul

from

$3.79

Product Features:

Brand may vary by location

from

$829.99

Oil pan leaking? This engine oil pan is precision-engineered to match the original equipment pan on specific vehicle years, makes and models for a reliable replacement.

Product Features:

Direct replacement – this engine oil pan is made to match the original pan on specific vehicles
Complete assembly – includes replacement pan and drain plugs to match original components
Durable design – high-strength coating prevents future corrosion
Trustworthy value – backed by team of engineers and quality control experts in the United States

from

$6.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$107.99

Demanded by today’s OEMs and manufactured to meet critical fit, form and function requirements, Dayco timing belt kits ensure parts accuracy, time savings and long-lasting performance. This kit is designed for the replacement of worn or damaged original equipment timing belts, tensioners and idler pulleys – each matched to a specific vehicle make and model.

Product Features:

Engineered for both domestic and import vehicle applications with a timing belt
All components needed for a complete timing belt replacement included in one box
Includes premium Dayco components and tough, wear-resistant belt

from

$8.29

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

Provides proper seal to ensure leak prevention
Stops engine blow by
High quality construction
Meets all OEM specifications

from

$2.79

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$21.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

Premium quality materials for longer service life
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$52.99

The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to Applicable to MAZDA 90-05;. Please verify your application.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1990-2005
Weight approx: 2 Lbs