2001 Lincoln Town Car Performance and Racing Products

Essential 2001 Lincoln Town Car Performance and Racing Products

Hypertech – Power Cap & Rotor Kit for Ford V8 with HEI (Part No.4062)

Power Cap & Rotor Kit for Ford V8 with HEI

from

$54.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.

Product Features:
  • High Output Voltage
  • More Spark Energy
  • Up To 7000 RPMs
  • No Drop Off In Power As RPMs Increase
  • Wider Plug Gaps; Brass Terminals
  • Constructed w/Burn Through Resistant Materials
  • Excellent Dielectric Strength
  • Resists Carbon Tracking
See More

MSD Ignition – Coils; Ford 4.6/5.4L 3-Valve 04-08 8-Pack (Part No.82438)

Coils; Ford 4.6/5.4L 3-Valve 04-08 8-Pack

from

$359.99
The improved spark energy and voltage of MSD’s blaster 2 coils, combined with reliability, have made them a favorite for performance enthusiasts. Whether firing a restored BOSS 429 or a Saturday night circle tracker, the blaster 2 has always gotten the job done. MSD is excited to offer blaster coils for late model Ford engines with coil-on-plug technology. The new blaster COPs are designed as a direct bolt-in replacement coil for many SOHC Modular Motors. The housing and installation are the same as the factory, but that’s where the similarity ends. Inside the MSD red housing, engineers spec’d better material to assemble the primary and secondary windings. There is also patented dual magnet technology to step up the output. Together, this combines a coil that produces higher voltage and spark energy. The coil-on-plug design of the blaster COPs puts the spark energy right out of the coil and across the plug gap to improve the combustion and output of the engine. The blaster 2 COPs are available individually or as a complete set of eight.

Product Features:
  • Fits 2005-2009 4.6L/5.4L SOHC 3V
  • Improved Spark Energy And Voltage Output
  • Patented Winding Design and Materials
  • Direct Bolt-In to Factory Connectors
  • CARB approved legal for use in all states
  • Comes in an package of 8
See More

MSD Ignition – Harness; Ford 4.6L Modular to DIS-4 Ignition (Part No.88813)

Harness; Ford 4.6L Modular to DIS-4 Ignition

from

$145.99
Using MSD’s DIS-4 ignition systems on your coil-on-plug Ford has always been a great upgrade, but honestly, the wiring poses quite a challenge. To ease this install, we now offer a wiring harness kit that’ll make the install nearly a direct plug-in. The harness provides a splice-free installation with connectors that plug directly into the factory unit. They even have corresponding wire colors. When used in conjunction with two DIS-4 ignitions and four dual ignition Adapters, PN 89121, your coil-on-plug Ford will receive all the spark it needs plus a two-step rev limit and step retard. And the best part is wiring will only take about an hour.

Product Features:
  • Easily install two DIS-4 Ignitions on late model Ford Engines
  • Easy Connections w/No Splicing Or Cutting Into Factory Wiring
  • Wiring the system will take only an hour
  • Multiple direct plug in connectors
  • Wiring the system will only take and hour
See More

Energy Suspension – Control Arm Bushing Set (Part No.4.3162G)

Control Arm Bushing Set

from

$105.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Hays – Performance; Flywheel (Part No.22-830)

Performance; Flywheel

from

$548.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.

Product Features:
  • Certified Billet Material
  • Borg and Beck Clutch Pattern
  • Long-Style Clutch Pattern
  • Ring Gear Securely Mounted To Prevent Spinning
See More

Energy Suspension – Sway Bar Bushing Set (Part No.9.5171R)

Sway Bar Bushing Set

from

$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Energy Suspension – Sway Bar Bushing Set (Part No.9.5172G)

Sway Bar Bushing Set

from

$30.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.F888410)

Performance Differential Ring and Pinion

from

$230.99


Product Features:
  • FRD 10BLT 8.8 R/P 4.10 MGP
See More

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Differential Pinion Solid Spacer Kit w/Shims

from

$10.49


Product Features:
  • SOLID SPACER FORD 8.8″ & 9″
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.F888430)

Performance Differential Ring and Pinion

from

$239.99


Product Features:
  • R&P FORD 8.8 430 RR TOOTH COUNT 43-10
See More

Motive Gear – Performance Differential Ring and Pinion (Part No.F888571)

Performance Differential Ring and Pinion

from

$275.99


Product Features:
  • FRD 10BLT 8.8 R/P 5.71 MGP
See More

Energy Suspension – Control Arm Bushing Set (Part No.4.3162R)

Control Arm Bushing Set

from

$105.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Fram – High Perf. Full-Flow Lube Spin-on (Part No.HP1)

High Perf. Full-Flow Lube Spin-on

from

$16.99
FRAM Racing® filters are designed with a heavy-gauge tapping plate and an extra-thick* steel can that is able to withstand the high pressure flexing caused by demanding driving conditions. A spiral-shaped center tube provides protection against collapse, and tough steel end caps add even more durability. A screen-over 22psi filter bypass valve provides additional protection against larger contaminants.** 

Product Features:
  • Proven protection for up to 10,000 miles
  • Engineered for use with synthetic or conventional motor oils
  • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
  • The perfect balance of dirt-trapping efficiency and dirt-holding capacity
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2010)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your en

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-3001)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More

Bully Dog – Watch Dog Economy Monitor (Part No.40400)

Watch Dog Economy Monitor

from

$241.99
Reads and erases diagnostic trouble codes (dtc’s). Tests horsepower, torque and performance. Internet updateable. Transferable to any applicable vehicle application. Easy to use capacitive touch buttons. Full color LCD.

Product Features:
  • Reads And Erases Diagnostic Trouble Codes (DTCs)
  • Tests HP/Torque And Performance
  • Internet Updateable
  • Transferable to Any Applicable Vehicle Application
  • Easy To Use Capacitive Touch Buttons
  • Full Color LCD
See More

Airaid – Air Filter (Part No.850-330)

Air Filter

from

$65.99
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.

Product Features:
  • Multi-Layer Construction
  • Most Durable Filters In The Industry
  • Outperforms The Others In Clean Air Testing
  • Assures Cleanest Air Possible From Washable Filter
  • Washable And Reusable
  • Made In The USA
  • Lifetime No Hassle Warranty
See More

2001 Lincoln Town Car Performance and Racing Products

You count on your 2001 Lincoln Town Car to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 20 Performance and Racing Products ranging in price from $10.49 to $548.99, you’re sure to find everything you need for your 2001 Lincoln Town Car.

Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 8 different brands like K&N, Energy Suspension, and Motive Gear. 2001 Lincoln Town Car Performance and Racing Products start as low as $10.49!

One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 396 extensive product reviews on 2001 Lincoln Town Car Performance and Racing Products.

Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 2001 Lincoln Town Car below to get started!

Top-Rated Performance and Racing Products Brands For Your 2001 Lincoln Town Car

Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Lincoln Town Car running right for years to come. In our inventory you’ll find brands like K&N, Energy Suspension, Motive Gear, and even more.

Popular K&N Performance and Racing Products

You’ll find popular K&N brand products across Performance Oil Filters. All are waiting to get your 2001 Lincoln Town Car back on the road. Some of the top-rated K&N products in these categories are:

FAQs for 2001 Lincoln Town Car Performance and Racing Products

What are the most purchased Performance and Racing Products for the 2001 Lincoln Town Car?

Out of 20 Performance and Racing Products for the 2001 Lincoln Town Car, the most popular in our inventory are:
Control Arm Bushing Set
from $105.99
This product is not rated
Control Arm Bushing Set
Performance Upper Performance Control Arm Bushings
Sway Bar Bushing Set
from $30.99
This product is not rated
Sway Bar Bushing Set
Performance Sway Bar Link Kits
Differential Pinion Solid Spacer Kit w/Shims
from $10.49
This product is not rated
Differential Pinion Solid Spacer Kit w/Shims
Performance Ring and Pinions