2001 Jaguar XJ8 Ignition and Tune-Up Products
More 2001 Jaguar XJ8 Ignition and Tune-Up Products Categories
If you’re looking for an original Ignition and Tune-Up Products replacement for a 2001 Jaguar XJ8, you can search through our selection below. You’ll also find aftermarket and OEM Ignition and Tune-Up Products to meet your needs.
Essential 2001 Jaguar XJ8 Ignition and Tune-Up Products
Idemitsu – Power Steering Fluid – 12 oz (Part No.30102-052A)
from
$6.29
IDEMITSU Premium PSF is specifically engineered to meet the demanding performance requirements of Honda and Acura power steering units. This advanced technology fluid is formulated with premium quality base oils and the latest additive technologies to provide outstanding protection and performance under the most servere environmental and driving conditions.IDEMITSU Premium PSF can also be used in most Asian Original Equipment Manufacturer (OEM) power steering units that do not utilize electronic power steering technology.
Product Features:
See More
Product Features:
- Unique friction technology provides efficient and noise-free operation
- Advanced formulation technology provides outstanding protection to the entire power steering system while delivering smooth performance under the most severe operating conditions
- Superior low temperature performance for easy flow and protection against cavitation and elimination of “squawking” and “squealing”
- Excellent compatibility with seals, gaskets and internal components to reduce the potential for leaks and ensures smooth performance over extended intervals
- Robust anti-wear and inhibitor chemistry provides enhanced component and fluid durability and long-life
DENSO – Coil On Plug Boots-8 (Part No.671-8176)
from
$164.99
DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.
Product Features:
See More
Product Features:
- OE design ensures a tight boot seal that protects against moisture intrusion
- High temperature resistant material provides greater protection against thermal overload
- Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
- Engineered to the specifications used by the original vehicle manufacturer for an exact fit
Carquest Premium – Knock Sensor (Part No.SBC3875)
from
$75.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
Carquest Premium – Knock Sensor (Part No.SBC3974)
from
$195.99
Carquest Knock Sensors respond to a wide range of engine knock frequencies providing accurate engine condition to the ECM for optimal ignition timing. Highest quality piezoceramic element manufactured to tight tolerances for increased durability. All MotoRad Knock Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- Precision piezoceramic element ensures accurate response to a wide range of engine vibrations
- Manufactured using the highest quality OEM materials to ensure optimal performance and rugged durability
- Designed to meet or exceed all OEM specifications in fit, form & function
- Extensive product testing includes salt spray, high/low temperature impact, thermal cycling, vibration, drop among other tests, to ensure all sensors meet or exceed OEM specifications.
ALLMAKES 4X4 – Knock Sensor (Part No.F6020225545AMR)
from
$83.70
Knock Sensor
Carquest Premium – Ignition Knock (Detonation) Sensor (Part No.SBA3749)
from
$129.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Autolite – Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life (Part No.APP3924)
from
$6.79
Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.
Product Features:
See More
Product Features:
- Works to optimize engine performance for a longer life and improved fuel economy
- OE design
- Full-platinum tips; platinum on both the center and side electrodes to promote reduced gap wear
- Platinum ball welding process provides a consistent point of contact for enhanced adhesion
DENSO – PQ20TT Platinum TT Spark Plug (Part No.4508)
Motorcraft – High-Durability Spark Plug: Reduces Misfires & Fuel Consumption (Part No.SP-485-X)
from
$9.29
Motorcraft Spark Plugs are original equipment on Ford Motor Company vehicles, engineered to meet strict Ford engineering standards for performance and reliability. These spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption, and optimize emissions. They are resistant to oxidation and arc erosion, feature a multi-rib insulator to protect against misfire, and offer service intervals of up to 100,000 miles. Backed by Motorcraft’s Service Parts Warranty, these spark plugs are an exact fit for Ford, Lincoln, and Mercury vehicles and are designed with high-quality materials to provide reliable performance for almost any application. Motorcraft ignition components also help prevent false check engine lights, ensuring your vehicle runs smoothly.
Product Features:
See More
Product Features:
- Motorcraft spark plugs are matched to specific engines to provide enhanced durability, eliminate misfires, reduce fuel consumption and optimize emissions.
- Backed by Motorcraft’s Service Parts Warranty
- Exact fit for Ford, Lincoln and Mercury vehicles
- Resistant to oxidation and arc erosion.
- Multi-rib insulator protects against misfire.
- Service intervals of up to 100,000 miles.
- Motorcraft Spark Plugs are designed with high quality materials to provide reliable performance for almost any application.
- Motorcraft Spark Plugs are what was in the vehicle when it was manufactured
- Motorcraft ignition components help prevent false check engine lights.
- Engineered for Ford Vehicles: Original equipment on Ford, Lincoln, and Mercury vehicles, ensuring a perfect fit and optimal performance.
Champion – Copper Plus Spark Plug RC12YC: Dependable Performance & Durability (Part No.71)
from
$4.99
This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for reliable performance. The Copper Plus design ensures dependable performance and durability, while the copper core center electrode allows for accurate control of heat range, extending the spark plug’s life. Built to ISO and SAE standards, it offers superior corrosion resistance and proven performance. The nickel copper alloy center electrode tip and flat seat type further enhance its reliability, making it a top choice for consistent engine performance.
Product Features:
See More
Product Features:
- Copper Plus – Dependable Performance and Durability
- Copper core center electrode allows for accurate control of heat range for longer life
- Superior corrosion resistance
- Built to ISO and SAE standards for proven performance
- Built to ISO and SAE standards for proven performance
- Reliable Engine Performance: Featuring a nickel copper alloy center electrode tip and flat seat type, this spark plug ensures consistent and reliable engine performance.
Carquest Premium – Ignition Switch (Part No.CSC2598)
from
$141.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Eurospares – Spark Plug Tube Seal (Part No.A8027138359ESP)
from
$5.14
Eurospares seals are designed engineered and manufactured to OE specifications.
Product Features:
See More
Product Features:
- OE Quality
- Vehicle Specific Composition
- Highly Durable Sealing Surface
APA/URO Parts – Spark Plug Tube Seal (Part No.A8027178243APA)
from
$2.98
APA/URO seals are designed engineered and manufactured to OE specifications.
Product Features:
See More
Product Features:
- OE Quality
- Vehicle Specific Composition
- Highly Durable Sealing Surface
Eurospares – Spark Plug Tube Seal (Part No.A802761013ESP)
from
$9.86
Eurospares seals are designed engineered and manufactured to OE specifications.
Product Features:
See More
Product Features:
- OE Quality
- Vehicle Specific Composition
- Highly Durable Sealing Surface
Beck/Arnley – Direct Ignition Coil (Part No.178-8363)
from
$158.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Made from premium materials to withstand high temperatures
- Primary and secondary windings made from copper
- Out of the box and straight onto the vehicle for easy installation
- Application specific for this vehicle
Delphi – Direct Ignition Coil – (Coil on Plug) (Part No.F3005229506DEL)
from
$73.73
Delphi ignition coils feature precise spark timing response for increased fuel economy and faster crank-to-run. The ignition coils provide accurate electrical energy to create a voltage potential at the spark plug, providing for superior engine performance that adjusts to driving and environment conditions. Plus, like all Delphi ignition system components, they enable engine management systems to maintain tighter control over emissions, economy and performance.
Product Features:
See More
Product Features:
- Improved dwell accuracy decreases module and coil temperatures for greater reliability
- Noise abatement material between laminations reduces audible coil noise
- Cassettes have improved primary connector for greater ease of assembly compared to designs with one connector for each coil
- Lower primary inductance provides high-speed performance
- Early and precise electronic spark timing helps improve fuel economy and provides faster crank-to-run
- Higher energy delivered to combustible mixture provides cleaner combustion to help manufacturers meet on-board diagnostics (OBD II) requirements
- Direct connection to spark plugs (via small boot) eliminates spark plug wires
- Composite iron coils provide programmable energy
- Coil per cylinder dwell overlap electronics deliver better high speed performance and better heat dissipation compared to some conventional technologies
- Coil per cylinder ramp and fire electronics decrease power dissipation and increase efficiency
- Radio frequency interference (RFI)suppressor optional
Delphi – Ignition Coil: Meets or Exceeds Original Equipment Design, 1 Piece (Part No.GN10448)
from
$74.99
Every single Delphi ignition coil is designed and endurance tested using high quality materials. This ensures fast starts, consistent engine performance and optimized fuel efficiency. We makes more than 10 million ignition coils for North America each year, and each one is engineered to OE design specifications for vehicles from Ford, Toyota, Nissan, Lexus, GM, Mazda, Chrysler, Subaru, Acura and more.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to insert power into spark plugs to ensure fast starts, consistent engine performance and optimized fuel efficiency
- Delphi uses smart winding process techniques to controls wire lengths, keeping voltage the same
- We manufacture our ignition coils with a high quality wire coating that resists imperfections that lead to failure
Delphi – Ignition Coil (Part No.GN10775)
from
$107.99
Delphi OE technology ignition products are validated to match the vehicles system; OE quality replacement parts for the right fit , form and function; Delphi coils provide OE performance, durability and electromagnetic capacity level requirements.
Product Features:
See More
Product Features:
- Delphi coils provide OE performance, durability and electromagnetic capacity level requirements
- Delphi ignition coils are designed to operate as part of an integral engine management system to insert power into spark plugs and ensure fast starts; consistent engine performance and optimized fuel efficiency
- Delphi uses winding process techniques to control the length of wire between adjacent windings; that’s important since more length means greater voltage differences and can create more pressure that could break down the insulation and wire coating
- We back our ignition coil design with proven materials, such as high quality wires and wire coating that resists the cracks, pin holes and imperfections that most often lead to failure issues
Carquest Premium – Ignition Coil: Meets or Exceeds OE Specifications, 1 Count (Part No.EBC1047)
from
$61.99
Carquest Premium ignition coils meet or exceed original equipment (OE) specifications and are developed by top OE/OES manufacturers to ensure superior performance. All of our Carquest Premium ignition coils are developed by IATF 16949 certified manufacturers for consistent durability and long-lasting performance. These ignition coils use high-quality components and will utilize optimized designs on applications where the OE ignition coil had frequent failures. We require stringent testing standards to ensure proper fit and performance for each application and stand behind our Carquest Premium ignition coils with an industry-leading warranty. Carquest Premium ignition coils are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.
Product Features:
See More
Product Features:
- Built by IATF 16949 certified manufacturers for consistent durability
- Coil drivers match OE for current limit, electrostatic discharge (ESD) protection and multi-spark
- Segmented secondary bobbins to distribute high voltage and prevent shorting
- Extensive design validation testing to ensure long-lasting reliability
- 100% end-of-line tested to ensure proper performance
- Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413
NGK – Ignition Coil: Meets or Exceeds Original Equipment Specifications, 1 Piece (Part No.48927)
from
$74.99
NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 year’s experience and are driven by extreme dedication to innovation, performance and quality. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience
Product Features:
See More
Product Features:
- OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
- OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
- EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
- THE NGK DIFFERENCE: Featuring superior materials and design enhancements.
- EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
- PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils
Autopart International Inc – Ignition Coil (Part No.F30002023778API)
from
$48.27
Ignition Coil
NGK – Coil on Plug Boot (Part No.58971)
from
$8.49
NGK Coil on Plug Boots are built to stringent OEM tolerances, combining original equipment fit, design and outstanding durability. NGK Coil on Plug Boots are manufactured using only premium silicone and always include any required internal springs and ferrite resistors for superior performance and RFI noise suppression. Bridging the important link between ignition coil and spark plug, COP boots should always be replaced with NGK Coil on Plug Boots at the time as changing spark plugs to prevent ignition problems such as flashover.
Product Features:
See More
Product Features:
- PREMIUM GRADE SILICONE: Designed to withstand harsh environments
- OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
Carquest Premium – Coil On Plug Insulator Boot: Spring included, Designed for direct fit (Part No.35-7073)
from
$7.49
CARQUEST Premium coil on plug boots are engineered to restore ignition boot reliability and performance. We have OE design providing an exact direct fit for your application and the performance and durability meet or exceed OE requirements. It offers excellent heat resistance as well as maximum protection against spark loss. With durable silicone compound for resistance to high heat or abrasion.
Product Features:
See More
Product Features:
- Provides excellent heat resistance as well as maximum protection against spark loss.
- Durable silicone compound for resistance to high heat or abrasion
- Spring included with the coil boot
- Design for direct compatibility
- OE design provides an exact fit for your application
- Multipack provides one time replace all COP for better deal
Popular 2001 Jaguar XJ8 Ignition and Tune-Up Products Categories
2001 Jaguar XJ8 Ignition and Tune-Up Products
You count on your 2001 Jaguar XJ8 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Ignition and Tune-Up Products. With 37 Ignition and Tune-Up Products ranging in price from $3.79 to $195.99, you’re sure to find everything you need for your 2001 Jaguar XJ8.
Brands matter. If you want to shop a specific Ignition and Tune-Up Products brand, we stock 13 different brands like NGK, Autolite, and Champion. 2001 Jaguar XJ8 Ignition and Tune-Up Products start as low as $3.79!
One of the best ways to find top quality OEM or aftermarket Ignition and Tune-Up Products is by asking professionals. Short of that, you can shop with confidence thanks to our 2,912 extensive product reviews on 2001 Jaguar XJ8 Ignition and Tune-Up Products. Some of the top-rated Ignition and Tune-Up Products products we carry are Champion Copper Plus- Single Card – RC12YC with 4.7 stars and Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life with 4.8 stars.
Did we mention you can order your Ignition and Tune-Up Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Ignition and Tune-Up Products inventory for your 2001 Jaguar XJ8 below to get started!
Top-Rated Ignition and Tune-Up Products Brands For Your 2001 Jaguar XJ8
Trusted Ignition and Tune-Up Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 2001 Jaguar XJ8 running right for years to come. In our inventory you’ll find brands like NGK, Autolite, Champion, and even more.
Popular DENSO Ignition and Tune-Up Products
You’ll find popular DENSO brand products across Spark Plugs. All are waiting to get your 2001 Jaguar XJ8 back on the road. Some of the top-rated DENSO products in these categories are:
from
$10.99
(2)
Iridium TT Spark Plug: Ultimate Endurance and Power, 0.4mm Iridium Tip, last 100K+ Miles, IQ20TT
Spark Plugs
Top-Rated NGK Ignition and Tune-Up Products
If NGK are what you’re looking for, our inventory holds plenty. We stock NGK brand Ignition and Tune-Up Products for your 2001 Jaguar XJ8, and some of our most reviewed NGK parts include:
FAQs for 2001 Jaguar XJ8 Ignition and Tune-Up Products
What are the most purchased Ignition and Tune-Up Products for the 2001 Jaguar XJ8?
Out of 37 Ignition and Tune-Up Products for the 2001 Jaguar XJ8, the most popular in our inventory are:
from
$9.99
This product is not rated
Iridium XP Finewire Spark Plug: Improved Durability, More Focused Ignition
Spark Plugs
from
$4.79
(126)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
Spark Plugs
What are the top-rated 2001 Jaguar XJ8 Ignition and Tune-Up Products?
Top-rated Ignition and Tune-Up Products for your 2001 Jaguar XJ8 based on customer reviews/ratings are:
from
$6.79
(72)
Double Platinum Spark Plug: Platinum Firing, Superior Durability, Longer Life
“Awesome”
