2001 Honda Civic Exhaust Parts

Essential Exhaust Parts for 2001 Honda Civics

Dorman – Help – Heat Shield Bolt Set (Part No.03294CD)

Heat Shield Bolt Set

from

$14.29
The catalytic converter heat shield bolt is essential for keeping heat from the exhaust system, away from adjacent car parts and flammable materials positioned under the vehicle. Our direct replacement heat shield bolt secures and holds the catalytic converter heat shield in place.

Product Features:
  • Direct replacement ensures a proper fit every time.
  • For extra protection our Heat Shield Bolts are galvanized for rust-resistance
  • Easy to install – No special tools required during installation
  • Testing on this part includes salt water corrosion and hardness testing for conformance to product standards and quality
See More

BRExhaust – Direct-Fit Premium Resonator Assembly – 940-325 (Part No.940-325)

Direct-Fit Premium Resonator Assembly - 940-325

from

$195.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Easy Installation
  • Engineered to provide excellent exhaust performance
  • Made from 16-gauge aluminized tubing
  • Increases horsepower and torque
  • Corrosion resistant
  • Built to OEM specifications
See More

Victor Reinz – Exhaust Manifold Gasket (Part No.71-52354-00)

Exhaust Manifold Gasket

from

$37.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.

Product Features:
  • Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
  • Able to withstand temperatures of up to 1400 degrees F.
  • Durable against wear and tear between manifolds and cylinder heads.
  • Ensures an effective seal as manifold flanges warp in extreme conditions.
See More

Walker – Exhaust 35129 Exhaust Bolt and Spring (Part No.35129)

Exhaust 35129 Exhaust Bolt and Spring

from

$10.79
Complete your exhaust repair with a Walker spring bolt kit. Designed to ensure a tight connection and inhibit leaks, Walker hardware is manufactured from durable and robust material for long service life.

Product Features:
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • CONSISTENT PERFORMANCE — Spring designed with the right compression strength for a secure connection
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • THE RIGHT CONNECTION — Designed to be used for ball and socket joint
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16373)

Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold

from

$1059.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker Ultra EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Walker – Exhaust Pipe 1.5" Outlet (OD) (Part No.47778)

Exhaust Pipe 1.5" Outlet (OD)

from

$119.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60569)

Exhaust Pipe Flange Gasket

from

$4.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-792)

Exhaust Flange Gasket

from

$5.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Exhaust System Hanger Insulator (Part No.35286)

Exhaust System Hanger Insulator

from

$13.99
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust 35460 Exhaust System Hanger Insulator (Part No.35460)

Exhaust 35460 Exhaust System Hanger Insulator

from

$6.79
Complete your exhaust repair with Walker® insulators. Available in a variety of styles and sizes, they’re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Hanger (Part No.255-383)

Exhaust Hanger

from

$6.79
BRExhaust exhaust insulator mounts are high-quality replacements for original equipment hangers¿designed to fit right the first time. They’re manufactured from premium rubber and available for a variety of car, truck, and van applications. BRExhaust insulator mounts will help to keep your components in the right position, resulting in a longer lifespan for your exhaust system.

Product Features:
  • Exhaust accessory that enables a complete installation process
  • Precise fitment
  • Precise fitment
  • Manufactured according to strict OE standards
  • Reduced Vibration
See More

HJS – Exhaust Hanger (Part No.H8050251977HJS)

Exhaust Hanger

from

$4.58
Exhaust Hanger

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)

Exhaust Manifold Hardware Kit

from

$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

BRExhaust – Exhaust Bolt (Part No.258-944)

Exhaust Bolt

from

$9.79
If the time has come to replace, install, or fix some components of the exhaust system, BRExhaust will have you covered with all necessary accessories, from bolts to hangers, that will help you complete the exhaust job quickly and easily. Getting mounting parts and other accessories and hardware from the manufacturer that designs exhaust systems for the leading North American carmakers will guarantee factory-like quality and perfect fit. Each and every accessory by BRExhaust is made of quality materials to ensure safe and secure exhaust system performance and long service life.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Proper fit and functionality to finish your install
See More

Dorman – Exh.Flange Bolt Spri (Part No.H80241184731DOR)

Exh.Flange Bolt Spri

from

$13.74
Exh.Flange Bolt Spri

MagnaFlow – Street Series Cat-Back Performance Exhaust System (Part No.19313)

Street Series Cat-Back Performance Exhaust System

from

$1169.99
The MagnaFlow 2016-2020 Honda Civic Street Series Cat-Back Performance Exhaust System brings out the personality of your 2.0L 2016-2020 Honda Civic with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 2.25in. main piping and 3 Straight-Through mufflers ending in a Dual Split Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Rolled Edge tips, this Honda Civic exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Honda Civic’s to shame. With this system your vehicle will be producing Moderate exterior and Mild interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19313 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19313 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:
  • Dyno-proven performance
  • Durable corrosion-resistant stainless steel construction
  • CNC precision robotic manufacturing techniques
See More

aFe POWER – Takeda Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Available HP (Part No.49-36603)

Takeda Axel Back Exhaust System: Polished Tip, 304 Stainless Steel, Unleashes All Available HP

from

$755.99
aFe is proud to introduce the new Takeda Axle Back Exhaust System. All aFe exhaust systems are engineered and manufactured in our Corona California manufacturing facility. This system uses factory mounting locations providing stability and hassle free installation. High quality OE style flange and band clamps are used for a complete 360 degree sealing surface. Dual free flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horse power and torque.

Product Features:
  • Polished 304 Stainless Steel High Flow Muffler
  • 2.5 in. Dia. Stainless Steel
  • 3.5 in. Dia. Slash cut Double Wall Tip
  • 100% Hand TIG Welded Headers
See More

BRExhaust – Exhaust Nut (Part No.258-038)

Exhaust Nut

from

$4.99
The exact fit, easy installation and enduring functionality of BRExhaust’s OE replacement exhaust nuts instantly equip your ride with optimally restored emissions control. Each OE replacement nut is manufactured using quality materials to ensure maximum durability and is designed to enable hassle-free exhaust repair.
See More

Walker – Direct Fit Exhaust Resonator and Pipe Assembly 2" Inlet (ID) (Part No.54986)

Direct Fit Exhaust Resonator and Pipe Assembly 2" Inlet (ID)

from

$133.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Walker – Exhaust Resonator and Pipe Assembly (Part No.47639)

Exhaust Resonator and Pipe Assembly

from

$119.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Walker – SoundFX Direct Fit Exhaust Muffler 1.5" Outlet (OD) (Part No.18862)

SoundFX Direct Fit Exhaust Muffler 1.5" Outlet (OD)

from

$137.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54260)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$194.99
Combining the only broad-market stainless-steel body construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

Walker – Exhaust Clamp (Part No.35325)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Clamp (Part No.35335)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

MagnaFlow – HM Grade Federal / EPA Compliant Manifold Catalytic Converter (Part No.50884)

HM Grade Federal / EPA Compliant Manifold Catalytic Converter

from

$1058.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 50884. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. Designed to fit the 2001-2005 Honda Civic and 2001-2005 Acura EL, this direct-fit catalytic converter also interchanges with OE parts 18160-PLM-A00 and 18160-PLM-A50, among others. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.24097)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$443.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24097. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2003-2005 Honda Civic and interchanges with OE parts 18190-PZA-A00 and 18190-PZA-L00. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.24193)

HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter

from

$894.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 24193. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2006-2011 Honda Civic and interchanges with OE part 18160-RRB-A00. The included gaskets & hardware reduce the possibility of a leaking seal while avoiding the need to reuse corroded factory parts for installation. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:
  • Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
  • Simplifies installation with essential gaskets and hardware being included in the box.
  • Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
See More

Walker – CalCat Universal Converter (Part No.80801)

CalCat Universal Converter

from

$142.99
Walker®, an industry leader for many popular European, Asian and North American vehicles, offers Walker® CalCat® Universal Catalytic Converters, available for OBDII (1996 and newer) vehicles and Pre-OBD (1995 and older) vehicles, specifically formulated to comply with California Air Resource Board (CARB) regulations. Walker® CalCat® Universal Catalytic Converters feature OE-style hangers, brackets, routings and heat shields allowing quick and easy installation of direct-fit units. OE expertise delivers application-engineered parts, providing the best fit and performance for even the most challenging emissions issues, while premium substrate material and a high-technology wash coat ensure exceptional oxygen storage capacity. Walker® CalCat® Catalytic Converters are legal for sale in the state of California, and any state complying with California regulations.

Product Features:
  • Legal for sale in the state of California, complies with C.A.R.B. regulations
  • Stainless steel body with aluminized pipe and heat shields for durability
  • Expandable bushings for custom installation requirements
  • Universal converter may require modification to complete installation
  • 5-year/50,000-mile catalytic performance and structural integrity warranty
See More

Upgrade your 2001 Honda Civic with Top-Quality Exhaust Parts

When it comes to maintaining or upgrading your 2001 Honda Civic, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Honda or enhancing its overall performance, Exhaust Parts are key to keeping your Civic functioning at its best. At Advance Auto Parts, we offer a wide selection of 60 Exhaust Parts for the 2001 Honda Civic, designed to meet your needs without breaking the bank. From Exhaust Muffler replacements to Exhaust Fittings upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2001 Honda Civic at great prices. Our Exhaust Parts inventory for this model ranges from just $1.99 to $1,322.99, with an average price of $243.60. Our 60 Exhaust Parts in stock come from 12 trusted brands, so you’re sure to find the right part for your 2001 Honda Civic without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Honda Civic, we stock popular OEM and aftermarket Exhaust Parts from top names like FELPRO, Walker, Dorman, and more. FELPRO Exhaust Parts start at just $5.79 and boast an impressive 5 stars average rating from customers. Walker and Dorman also bring quality to the table, with Exhaust Parts available starting at $1.99, and at an average 4 stars rating. With 1,331 customer reviews and counting, our 2001 Honda Civic Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Honda Civic is always ready to roll. We’re committed to providing you with everything you need to keep your Civic in top shape, all in one place. Start shopping confidently below for your 2001 Honda Civic!

Best-Selling Exhaust Mufflers for 2001 Honda Civics

Enhance the driving experience in your Honda with 3 quality Exhaust Muffler components, starting at $116.99.

Walker – SoundFX Muffler, Direct Replacement, No Fabrication Needed (Part No.18905)

SoundFX Muffler, Direct Replacement, No Fabrication Needed

from

$116.99
Featuring 100% aluminized steel for longer service life compared to low-carbon steel, Walker SoundFX direct-fit mufflers deliver quality appearance and favorable acoustics while mechanical interior joints and spun-locked heads provide durability.

Product Features:
  • RESISTS CORROSION — Aluminized steel construction and internal drainage system helps reduce corrosion
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn’t require specialized fabrication and/or welding
  • FACTORY SOUND — Louvered tubes help reduce radiated noise for factory-style sound quality compared to straight perforated tubes
  • GET MORE MILES FROM YOUR MUFFLER — Designed and tested to extend muffler life
See More

Walker – Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed (Part No.54312)

Quiet-Flow Muffler, Direct Replacement, No Fabrication Needed

from

$199.99
Combining the only broad-market stainless-steel construction with a direct fit OE-style replacement, Walker Quiet-Flow SS muffler assemblies deliver longer life than typical aluminized mufflers and are available for domestic and foreign vehicles.

Product Features:
  • CORROSION RESISTANT STAINLESS STEEL — The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
  • EASY TO INSTALL — Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and/or welding
  • BUILT TO LAST — Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
  • PREMIUM ACOUSTIC CONTROL — OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
  • DESIGN VALIDATED — Acoustic and flow tested for quality OE-style sound you can count on
See More

BRExhaust – Direct-Fit Premium Muffler Assembly (Part No.279-841)

Direct-Fit Premium Muffler Assembly

from

$182.99
This BRExhaust muffler assembly is constructed by one of the leading aftermarket suppliers to provide OE-style performance and maintain a factory-like sound. The direct-fit configuration allows for easy, bolt-on installation with no modifications required. The component is designed to offer corrosion protection in addition to optimal noise reduction and low backpressure. Built from 16-gauge steel tubing and fully aluminized, these mufflers feature an OE-style direct fit configuration compatible with your import or domestic vehicle¿while the interior design of the muffler box ensures quiet performance.

Product Features:
  • Based on the original OEM design for a guaranteed perfect fit
  • No welds inside the silencer
  • Easy installation
  • Aluminized steel construction for maximum durability
  • Constructed to reduce flex and withstand vehicle vibration
  • External drain hole extends muffler life by allowing moisture to escape
  • Uniform flow holes facilitate even distribution of exhaust flow through the muffler’s interior
See More

Most Popular 2001 Honda Civic Exhaust Fittings

Customize your Honda with 1 Exhaust Fittings products like Exhaust Clamps, all priced under $1.99.

Walker – Exhaust Clamp (Part No.35325)

Exhaust Clamp

from

$1.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.

Product Features:
  • CONNECTS EXHAUST PARTS — Provides secure, leak-resistant connection
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • PREMIUM MATERIALS?–?Made from quality material for durability and long life
  • BETTER TOGETHER — Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
See More

Top Picks for 2001 Honda Civic Exhaust Manifold and Headers

Upgrade Honda Civics with top-quality Exhaust Manifold and Headers parts, including 9 OEM and aftermarket selections for your 2001 model.

Walker – Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.16373)

Ultra EPA Direct Fit Catalytic Converter with Integrated Exhaust Manifold

from

$1059.99
Designed to comply with EPA emissions requirements while delivering premium performance with assured compliance, Walker Ultra EPA-Compliant Manifold Converters are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:
  • EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES — OE-style high-technology washcoat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
  • STRONG AND DURABLE — Features thick OE-style flanges and manifolds for strength and durability
  • OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
See More

Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03415B)

Exhaust Manifold Hardware Kit

from

$29.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.

Product Features:
  • Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Walker – CalCat CARB Direct Fit Catalytic Converter with Integrated Exhaust Manifold (Part No.82450)

CalCat CARB Direct Fit Catalytic Converter with Integrated Exhaust Manifold

from

$951.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Manifold Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:
  • CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
  • DIRECT-FIT DESIGN — Bolt-off, bolt-on OE-style converter with integrated manifold assemblies that attach directly to engine cylinder head and match all downstream connections
  • SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
  • CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
  • STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
See More

MagnaFlow – OEM Grade Direct Fit Catalytic Converter – EPA Federal Compliant (Part No.H3000957331MAG)

OEM Grade Direct Fit Catalytic Converter - EPA Federal Compliant

from

$1294.74
EPA Federal Compliant – Not Legal for sale or use in California. Legal in New York and Maine on EPA Federal Emission Equipped Vehicles only. OEM Grade is for use with California Emmision Equipped vehicles outside the State of California, New York and Maine. MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured. MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses both Ceramic and Metallic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications. All Federal catalytic converters meet EPA requirements. Federal Catalytic Converters are not legal for sale, installation or use on vehicles registered in the state of California.

Product Features:
  • Stainless steel construction
  • Direct-Fit; No welding or cutting
  • Ceramic and Metallic substrates
  • Federal Emissions compliant design
  • Formulated for Gas and Diesel Applications
See More

MagnaFlow – Direct Fit C.A.R.B. Compliant Catalytic Converter – 50 State Legal (Part No.H3000955838MAG)

Direct Fit C.A.R.B. Compliant Catalytic Converter - 50 State Legal

from

$1017.08
California C.A.R.B Compliant – Legal for sale and use in all 50 states including California, New York, and Maine. All California and New York State Catalytic converters are required to be CARB compliant. Converters in this catalog are based on Executive Orders issued by the California Air Resource Board (CARB) and must be used in accordance with this information. In California and New York, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. MagnaFlow specializes in superior catalytic converter and exhaust technology and has spent the past 30+ years earning its reputation as a global market leader. American engineered and manufactured, MagnaFlow Catalytic Converters combine efficient industrial design to produce a product that exceeds, rather than meets, the highest standards of product performance and efficiency in the industry. MagnaFlow uses Ceramic substrates with different combinations of cell density and wall thickness to meet vehicle specific requirements. MagnaFlow Direct-Fit Catalytic Converters are designed for easy bolt-on installation for the Professional Installer. Each is designed to exact the original equipment specifications.

Product Features:
  • Stainless steel construction
  • Direct-Fit; No welding or cutting
  • California Emissions compliant design
  • Ceramic substrates
  • Formulated for Gas and Diesel Applications
  • Uses Factory Hangers.
See More

CATCO Catalytic Converters – Catalytic Converter (Part No.H300037544CAT)

Catalytic Converter

from

$934.87
Catalytic Converter

Dorman – Manifold Converter – Carb Compliant – For Legal Sale In NY – CA – ME (Part No.673-6081)

Manifold Converter - Carb Compliant - For Legal Sale In NY - CA - ME

from

$796.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Dorman – Manifold Converter – Carb Compliant – For Legal Sale In NY – CA – ME (Part No.673-608)

Manifold Converter - Carb Compliant - For Legal Sale In NY - CA - ME

from

$716.99
This catalytic converter with integrated exhaust manifold – a.k.a. manifold converter – is precision-engineered to match the original equipment on specific vehicle years, makes and models for a reliable replacement.

Product Features:
  • Direct replacement – this manifold converter is designed to match the fit and performance of the original equipment on specific vehicles.
  • Convenient kit – includes gaskets and downpipe hardware to simplify installation.
  • Durable construction -manufactured within strict tolerances for reliable longevity
  • Trustworthy value – backed by team of engineers and quality control experts in the United States
See More

Autopart International Inc – Catalytic Converter (Part No.H30002725267API)

Catalytic Converter

from

$698.59
Catalytic Converter

In-Demand Exhaust Hangers for 2001 Honda Civics

Select from 4 premium Exhaust Hangers parts for your 2001 Honda Civic, with prices ranging from $4.58 to $9.49.

Walker – Exhaust 35119 Exhaust System Hanger Insulator (Part No.35119)

Exhaust 35119 Exhaust System Hanger Insulator

from

$9.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Spring (Part No.251-203)

Exhaust Spring

from

$5.99
BRExhaust replace exhaust springs are built to OE specifications and are designed for precise fitment in order to ensure a leak-free connection. These corrosion-resistant springs could be just the parts you need to complete your exhaust installation.

Product Features:
  • Exhaust accessory that enables a complete installation process.
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Direct-fit OE replacement exhaust spring
  • Engineered to provide excellent exhaust system management
  • Corrosion resistant
  • Built to OEM specifications
See More

Walker – Exhaust System Hanger Insulator (Part No.35375)

Exhaust System Hanger Insulator

from

$9.49
Complete your exhaust repair with Walker insulators. Available in a variety of styles and sizes, they¿re designed to work with Walker aftermarket replacement parts for quick and easy installation.

Product Features:
  • OE DESIGN — Designed with OE-style features for easy installation and fit
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • KEEPS EXHAUST PARTS IN PLACE — Designed to support undercar exhaust components
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

HJS – Exhaust Hanger (Part No.H8050251977HJS)

Exhaust Hanger

from

$4.58
Exhaust Hanger

Most Sold 2001 Honda Civic Exhaust Pipes

Explore our best-selling Honda parts for the 2001 Civic among 17 OEM and aftermarket options starting from $5.79.

Walker – Exhaust Pipe Flange Gasket (Part No.31614)

Exhaust Pipe Flange Gasket

from

$15.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials (Part No.31557)

Donut Exhaust Pipe Flange Gasket: Graphite, Heat Resistant, Premium Materials

from

$9.79
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60517)

Exhaust Pipe Flange Gasket

from

$5.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

Walker – Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials (Part No.31360)

Donut Exhaust Pipe Flange Gasket: Graphoil, Heat Resistant, Premium Materials

from

$7.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

Walker – Exhaust Pipe Flange Gasket (Part No.31383)

Exhaust Pipe Flange Gasket

from

$8.49
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
  • HEAT RESISTANT — Designed to resist heat for long-lasting performance
  • PREMIUM MATERIALS — Made from high-quality materials for durability and long life
  • ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-036)

Exhaust Flange Gasket

from

$8.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Exhaust Resonator and Pipe Assembly (Part No.47773)

Exhaust Resonator and Pipe Assembly

from

$162.99
Designed to fit, perform and sound like the original system, Walker resonators use precise tuning technologies to deliver excellent flow characteristics and OE-style sound.

Product Features:
  • EASY TO INSTALL — Meticulous pipe routing and OE-style hardware, flanges, and brackets for fast, easy installation
  • RESISTS CORROSION — Durable aluminized steel construction and helps reduce corrosion
  • FACTORY SOUND — OE-style louvered tubes (where applicable) help reduce radiated noise for factory-style sound quality
  • STRONG AND DURABLE — Features thick OE-style flanges, hardware and brackets for strength
  • GET MORE MILES FROM YOUR RESONATOR ASSEMBLY — Engineered to fit, perform and sound like the original system
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60884)

Exhaust Pipe Flange Gasket

from

$8.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-792)

Exhaust Flange Gasket

from

$5.79
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Walker – Exhaust Pipe 1.5" Outlet (OD) (Part No.47778)

Exhaust Pipe 1.5" Outlet (OD)

from

$119.99
Made from aluminized steel for durability, Walker premium pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:
  • RESISTS CORROSION — Durable aluminized steel construction for corrosion resistance and performance
  • EASY TO INSTALL — Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
  • OE-STYLE PERFORMANCE — Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
  • BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
  • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of lengths and diameters and features the appropriate Inlet Diameter (I.D.) – Outlet Diameter (O.D.) connection; see product specifications for more information
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1003)

Exhaust Flange Gasket

from

$22.29
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

BRExhaust – Direct-Fit Premium Resonator Assembly (Part No.285-059)

Direct-Fit Premium Resonator Assembly

from

$168.99
BRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Easy Installation
  • Engineered to provide excellent exhaust performance
  • Made from 16-gauge aluminized tubing
  • Increases horsepower and torque
  • Corrosion resistant
  • Built to OEM specifications
See More

Felpro – Exhaust Pipe Flange Gasket (Part No.60690)

Exhaust Pipe Flange Gasket

from

$16.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Unsurpassed quality you can trust
  • Validated for fit, form, and function
See More

BRExhaust – Direct-Fit Premium Resonator Assembly – 940-325 (Part No.940-325)

Direct-Fit Premium Resonator Assembly - 940-325

from

$195.99
BRExhaust Direct-Fit Exhaust Resonator and Pipe AssemblyBRExhaust direct-fit exhaust resonator and pipe assemblies are designed to install easily and help you retain the OE exhaust sound you are looking for. Increase horsepower and torque with this corrosion resistant direct-fit component. Aluminized steel construction ensures maximum durability.

Product Features:
  • Direct-fit configuration
  • Easy Installation
  • Engineered to provide excellent exhaust performance
  • Made from 16-gauge aluminized tubing
  • Increases horsepower and torque
  • Corrosion resistant
  • Built to OEM specifications
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1101)

Exhaust Flange Gasket

from

$22.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

BRExhaust – Exhaust Flange Gasket (Part No.256-1063)

Exhaust Flange Gasket

from

$19.49
BRExhaust replacement exhaust brackets make repairs easy. Each gasket has been engineered to according to OE standards to ensure a gas-tight connection and precise fitment. Utilizing the OE specifications also makes installation easy.

Product Features:
  • Designed to facilitate hassle-free exhaust repair
  • Precise fitment
  • Manufactured from quality materials to ensure maximum durability
  • Designed for a leak free connection
  • OE structure and design
  • Built to OEM specifications
  • Secure gas-tight connection
See More

Ishino – Exhaust Gasket (Part No.H4000187327ISH)

Exhaust Gasket

from

$18.23
Exhaust Gasket

Top-Rated Exhaust Parts Brands For Your 2001 Honda Civic

Shop for the best-rated brands offering Exhaust Parts and other products for your 2001 Honda Civics. Below you’ll find some of our best rated Exhaust Parts from FELPRO, Walker, and Dorman, and more. Exhaust Parts from these brands that fit a 2001 Civic start at just $1.99 and are rated as high as 5 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular FELPRO 2001 Honda Civic Exhaust Parts

When it comes to maintaining or upgrading your 2001 Honda Civic, using quality Exhaust Parts is essential to ensure durability and a perfect fit. FELPRO ticks all of those boxes. We offer a wide selection of FELPRO Exhaust Parts, specifically designed for the 2001 Honda Civic. With over 4 FELPRO brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $5.79, with an average price of just $11.79. Plus, with over 9 customer reviews and an average rating of 5 stars, you can trust that our FELPRO Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

Exhaust Pipe Flange Gasket
from
$5.79

(1)

Exhaust Pipe Flange Gasket

“fit great on both oem and walker systems.”

EXHAUST MANIFOLD GASKET SET
from
$16.29

(3)

EXHAUST MANIFOLD GASKET SET

“Excellent Fel Pro gasket, perfect fit for my
2004 Honda Civic EX 2 Dr Coupe with a Vtec engine.”

Exhaust Pipe Flange Gasket
from
$16.79
This product is not rated

Exhaust Pipe Flange Gasket

“”

Popular Walker 2001 Honda Civic Exhaust Parts

Walker auto parts is one of the highest quality Exhaust Part brands in the market. Any 2001 Honda Civic owner should feel confident when installing genuine Walker parts in their vehicle. To ensure the best fit and performance for your 2001 Civic, Advance Auto Parts carries a full inventory of 18 Walker Exhaust Parts. Plus you will be keeping your Honda in peak condition while saving money because prices on these Walker Exhaust Parts range from $1.99 to $1,059.99, plus, with more than 276 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.

Exhaust System Hanger Insulator
from
$9.49
This product is not rated

Exhaust System Hanger Insulator

“”

Exhaust Pipe 1.5" Outlet (OD)
from
$119.99
This product is not rated

Exhaust Pipe 1.5" Outlet (OD)

“”

FAQs for 2001 Honda Civic Exhaust Parts

Which Exhaust Parts are best-sellers for 2001 Honda Civics?

Out of 60 Exhaust Parts that fit 2001 Honda Civics, the following parts are the top sellers:

What’s the price range for 2001 Honda Civic Exhaust Parts?

Exhaust Part prices for the 2001 Honda Civic start at $1.99 and go up to $1,322.99 for the most premium parts.

What’s the average price of a Exhaust Part for a 2001 Honda Civic?

The average price for Exhaust Parts for the 2001 Honda Civic is $243.60. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Exhaust Parts for other Honda Civic model years?

Yes, we currently carry Exhaust Parts for 51 model years of Honda Civics between 1973 and 2024. Exhaust Parts are bought most frequently for the following model years: 2022, 2021, 2020, 2019, 2018, 2017, 2016, 2015, and 2014.

What are the cheapest Exhaust Parts for my 2001 Honda Civic?

The cheapest 2001 Honda Civic Exhaust Parts we carry in stock are:

What are the top-rated Exhaust Parts that fit the 2001 Honda Civic?

Out of 1,331 reviews by customers, our 2001 Honda Civic Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2001 Honda Civic and their top-rated products:

What types of Exhaust Parts do you sell for my 2001 Honda Civic?

As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2001 Honda Civic:

Can I get help with 2001 Honda Civic Exhaust Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Honda Exhaust Parts and more.

What is your return policy for Honda Civic Exhaust Parts?

Advance Auto Parts keeps returns simple. For new Honda Civic Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.