2001 GMC Sierra 3500 Bodies and Fender Parts

New Standard Replacement Upper Tailgate Molding, Base And Sl Fleetside Models, Black Textured, Without Bolt Holes Showing

Product Features:

• Base And Sl Fleetside Models, Black Textured, Without Bolt Holes Showing, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New CAPA Certified Premium Replacement Passenger Side Fender, GMC Only, Except Mexico Built Models And Those Begin With Vin 3, Made Of Galvanized Steel

Product Features:

• GMC Only, Except Mexico Built Models And Those Begin With Vin 3, Made Of Galvanized Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

New Standard Replacement Driver Side Rear Fender Flare, Black

Product Features:

• Black, Made Of Polypropylene
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Spare tire hoist rusted out and corroded? This replacement hoist is specifically engineered to match the original design on specific vehicles, and it’s specially coated to resist future rust and corrosion.

Product Features:

• Direct replacement – this spare tire hoist is precisely engineered to replace the hoist that comes stock on specific vehicle years, makes and models
• Easy installation – simply remove the spare tire, unbolt the original part, and bolt on this replacement
• Functionality ensured – hoist appearance may vary slightly from original part but functions the same
• Corrosion resistant – specially coated to prevent future rust and corrosion

New Standard Replacement Passenger Side Upper Wheel Arch Patch, 12 1/4 X 37

Product Features:

• 12 1/4 X 37, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6″ oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6″ ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options.

Product Features:

• No-drill, vehicle-specific application for a custom fit
• Compatible with 6″ oval track mounting system for easy, secure installation
• Heavy-duty steel construction with a durable black powder coat finish

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

• Available in blind, push-in and screw-in styles
• Constructed of high-quality materials for long-lasting durability
• Also suitable for a broad variety of industrial and commercial uses
• Packaged in a variety of piece counts for use with both small and large projects

Auveco products provide OE fit and function.

This replacement console lid restores the appearance and function of a worn or damaged original equipment lid. Made of durable materials, this direct replacement part is designed for long-lasting durability.

Product Features:

• Ideal replacement – this console lid matches the fit and function of the original equipment lid
• Durable construction – this console cover is made from quality materials for durability
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life

Needa Parts, a division of the Hillman Group, is an industry leader in all types of automotive body fasteners, retainers, and clips, offering over 400 SKUs of interior, exterior, and underhood fasteners.

Product Features:

• Needa Parts offers a complete assortment for all popular makes and models
• Vehicle make specific fastener kits are available
• All fasteners meet or exceed OEM standards

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

• Constructed of high-quality materials for Length-lasting durability
• Many different styles are available, including threaded and wide panel
• Packaged in a variety of piece counts for use with both small and large projects
• Also suitable for a broad range of industrial and commercial uses

Dorman offers a comprehensive variety of rivets for almost any automotive fastening job. They’re available in a broad variety of lengths, head diameters, hole diameters, and grip ranges.

Product Features:

• Available in blind, push-in and screw-in styles
• Constructed of high-quality materials for long-lasting durability
• Also suitable for a broad variety of industrial and commercial uses
• Packaged in a variety of piece counts for use with both small and large projects

New Standard Replacement Driver Side Rocker Panel, 2 Door Standard And Extended Cab, Slip-On Style, 47 X 8 X 7

Product Features:

• 2 Door Standard And Extended Cab, Slip-On Style, 47 X 8 X 7, Made Of Steel
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Auveco products provide OE fit and function.

When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4″ oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. ARIES 4″ oval side bars are made with strong 4″ elliptical tubing and are available in two different finish options to allow you full customization: polished stainless steel and black powder coat carbon steel. This set of side bars is constructed from high-strength carbon steel for a solid step, and they feature a dual-layer E-coat and semi-gloss black powder coat finish for excellent protection against scratching, chipping and peeling. Something that sets the ARIES 4″ oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4″ oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. To add an extra element of class to our oval sides, we also fit each one with a stainless steel insignia bearing the ARIES name. Installation of ARIES 4″ oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary. These nerf bars fit select model years of the Chevrolet Silverado and GMC Sierra 1500, 2500 HD, 2500 HD Classic, 3500 HD and 3500 Classic (see application info to verify fitment).

Product Features:

• 20-degree bends to contour to the body of the vehicle
• Seamless, welded end caps for a superior, finished look
• Raised, custom, non-skid step pads for safe, comfortable entry and exit
• High-strength carbon steel construction
• Durable E-coat and semi-gloss black powder coat finish for solid rust resistance
• Brushed stainless steel ARIES insignia on each step
• Elliptical, 4″ wide, heavy-wall tube design
• No-drill, vehicle-specific application for a custom fit
• Heavy-duty steel mounting brackets for a solid step

Custom Hood Protectors by Covercraft are a sporty accessory that protects your vehicle’s hood. Custom made to fit your specific vehicle. Constructed from a durable leather-grain vinyl that is micro-perforated for quick drying. No need to remove it when wet. A special knit backing is gentle on your vehicle’s finish, protecting your paint and protecting your vehicle’s value. A CHP is a great alternative choice of protection from a full front-end cover. Unexpected road damage is inevitable. Great protection, great style, it’s the easiest way to keep your vehicle in pristine condition!

Product Features:

• Protects vehicle’s hood from bugs or rock chips
• Low profile, aerodynamic design
• Installs in less than 5 minutes, no tools required
• Custom fit exactly to your vehicle
• Leather grain vinyl

Putco Fender Trim is the easiest way to create a custom look for your truck, SUV, or car. Designed for reliable durability and style, this trim features a stainless steel construction and installs directly to your truck without modification. Our fender trim in Stainless Steel and Black Platinum finish that combines the bright styling of chrome with the intensity of black for a uniquely deep finish. Pair them with any number of Putco trim pieces to create bold and dominating appearance.

Product Features:

• Enhances The Look Of Your Vehicle For A True Custom Look
• Made Of 304 Stainless Steel
• Features UV Resistant Rubber Edge Trim For A Customized Fit
• Complete The Chrome Look By Adding Mirror, Head Lamp, And Tail Light Covers
• Easy To Install Using Stainless Steel Hardware

New ProEFX Rear Roll Pan Without License Plate, For Models With Fleetside Bed

Product Features:

• Fleetside Bed
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

• Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
• Quality material – this retainer is made of durable material for long-lasting service
• Versatile design – this retainer is suitable for a variety of automotive uses
• Excellent value – this part offers original equipment quality at a competitive cost

New Standard Replacement Driver Side Fender Liner, 2500/3500 Heavy Duty

Product Features:

• 2500/3500 Heavy Duty, Made Of Plastic
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Auveco products provide OE fit and function.

Auveco products provide OE fit and function.

Truck bed loose from rusted or missing hardware- This truck bed mounting hardware matches the fit of the original equipment mounting hardware to securely remount the truck bed to the frame.

Product Features:

• Ideal replacement – this bed mounting hardware kit contains all the necessary components to completely remount the truck bed to the frame
• Durable construction – this truck bed hardware is finished with a corrosion-resistant coating for a long service life
• Cost-effective solution – offers original equipment quality at competitive price
• Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life

Don’t let worn body mounts ruin your vehicle’s comfortable ride. This body mount includes all the hardware required for an easy replacement. Made with quality materials for a long service life, this vehicle-specific design is a perfect fit.

Product Features:

• Direct replacement – this body mount fits and functions like the original equipment mount
• Quality construction – manufactured from premium materials for a long service life
• Excellent value – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Dee Zee Flaps Protect your vehicle and trailer from rocks and messy conditions. Wider than most brands for maximum protection. Black Composite material fits any truck, van or SUV. Universal 11 Inch X 15 Inch Notched 1 pair front or rear flaps and mounting hardware. The road can be a scary place for your vehicle. Rocks, sticks and other debris can wreak havoc on your finish and cause hundreds or even thousands of dollars worth of damage.

Product Features:

• Protect Your Vehicle And Trailer From Rocks And Messy Conditions
• Universal Fitting
• Easy No Drill Installation
• Perfect Compliment Nerf Bars

The WeatherTech MudFlap – Laser Measured for a Perfect Fit set literally mounts-in-minutes (in most applications) without the need for wheel/tire removal, and most importantly – without the need for drilling into the vehicle fragile painted metal surface Contoured specifically for each application and molded from a proprietary thermoplastic resin, the WeatherTech MudFlap will offer undeniable vehicle protection.

Product Features:

• Protects Your Vehicle s Fenders And Exterior From Rocks, Mud, Road Grime And Other Debris Picked Up By Vehicle s Wheels
• Featuring The Patented QuickTurn Hardened Stainless Steel Fastening System
• Provide Protection For Your Vehicle Most Vulnerable Rust Area
• Protecting The Fender And Rocker Panel From Stone Chips, Slush, Dirt And Debris
• Molded From A Proprietary Thermoplastic Resin
• No Drilling Required And Installs In Minutes

Some people demand a little more from their running boards. When toughness takes precedence the Dee Zee Rough Step running provides a rugged step area for trucks and cargo vans. Our Rough Step running boards are forged out of your choice of industrial gauge steel or heavy duty aluminum and coated with our patented NRT (TM) (No Rust Technology) black powder coat for optimal ruggedness and resistance against corrosion. Our grated design allows mud, water, snow, and what ever else you step in daily to easily pass through, preventing buildup while providing unmatched traction when entering or exiting the vehicle. Plus they are built Dee Zee tough, so you Do not have to feel bad the next time you use them to scrape your boots clean.

Product Features:

• Rugged 12 Gauge Steel Construction Or Heavy Duty Aluminum
• NRT (TM) Black Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Grated Steel Top Provides Unmatched Traction
• Dirt And Water Drain Away To Keep The Board Clear Of Debris
• Made In Americas Heartland USA

TrailFX Step Bars maximize style and safety when entering and exiting your vehicle. Available in various sizes, shapes, and finishes, TrailFX steps offer a solution for every need. Each pair installs seamlessly against the vehicles contours for a sleek and stylish look. With TrailFX step products, a custom look doesn’t have to break the bank.

Product Features:

• Mount Kit Included
• Frame Body Mount Bolts
• Drilling Not Required
• 2 Pads On The Bar
• 30 To 60 Minute Professional Installation Time
• T304 Marine Grade Stainless Steel Ensures Maximum Strength And Durability; Extra Large Molded Step Pads Provide Slip Resistant Entry And Exit Points To The Cab
• Steel Mounting Brackets Are Included To Install Steps With Ease; Oval Step Shape Offers A Wider Stepping Area For Secure Footing
• Limited Lifetime Warranty