2001 GMC Sierra 1500 Clutch Systems
Find Your Specific 2001 GMC Sierra 1500 Clutch Systems
Below you will find various in-demand GMC Clutch Systems, components and accessories for your 2001 Sierra 1500. Advance Auto Parts has popular Sierra 1500 parts like Clutch Pilot Bearings, Clutch Kits, Clutch Master Cylinders and more. You’ll also find aftermarket and OEM Clutch Systems for other Sierra 1500 model years including
2007,
2008,
2009,
2010,
2011,
2012,
2013,
2017,
2018 and more. Select a category of 2001 GMC Sierra 1500 Clutch Systems below and start saving instantly.
Popular 2001 GMC Sierra 1500 Clutch Systems Categories
Essential Clutch Systems for 2001 GMC Sierra 1500s
ATP – Automatic Transmission Flex Plate (Part No.Z-271)
from
$94.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Hays – Flexplate GM Ls (Part No.10-030)
from
$205.99
Flexplate GM Ls
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
LuK – Clutch Master Cylinder (Part No.LMC408)
from
$72.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
Product Features:
See More
Product Features:
- Kit Includes: Clutch Master Cylinder, Pushrod, Pushrod Clap, O-Ring, and Roll Pin
ARP Auto Racing – 10 Millimeter X 1.50 Thread Size, 180000 Psi Tensile Strength, Hex Style Head (Part No.134-2201)
from
$29.99
The importance of pressure plate bolts in a racing or Hi-Performance street application cannot be emphasized nearly enough. These fasteners play a key role in both the performance and safety of a vehicle. Because of this, ARP has developed special pressure plate bolts that are application specific to ensure the optimum grip length. ARP offers High Performance Series bolts that are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 PSI. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 PSI. Both models feature a large diameter, low profile design. Complete with washers.
Product Features:
See More
Product Features:
- High Performance Series Bolts That Are Made From A Premium Grade Chrome Moly And Hardened To A Nominal Tensile Strength Of 180,000 PSI
- Special Application Specific Pressure Plate Bolts To Ensure The Optimum Grip Length
- Large Diameter, Low Profile Design
- Complete With Washers
- Sold As A Kit
- 180,000 PSI
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC326)
from
$167.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
LuK – Clutch Kit: 11 7/8" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-181)
from
$301.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.04-205)
from
$323.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.04-204)
from
$359.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Richmond Gear – Differential Cross Shaft (Part No.80-0272-1)
from
$66.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS039)
from
$198.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More
GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1082)
from
$20.49
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Support the end of the transmission input shaft while the clutch is disengaged
- Allows for smooth changing of gears
- Helps keep transmission input shaft properly aligned
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
National – Bearings (Part No.57080)
from
$27.49
Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.
Product Features:
See More
Product Features:
- RIGHT TYPE – Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
- PREMIUM MATERIALS – Precision manufactured using high-quality materials for outstanding durability and performance
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Upgrade your 2001 GMC Sierra 1500 with Top-Quality Clutch Systems
When it comes to maintaining or upgrading your 2001 GMC Sierra 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Clutch Systems are key to keeping your Sierra 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Clutch Systems for the 2001 GMC Sierra 1500, designed to meet your needs without breaking the bank.
From
Clutch Pilot Bearing
replacements to
Clutch Kits
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2001 GMC Sierra 1500 at great prices.
Our Clutch Systems inventory for this model
ranges from just $20.49 to $359.99, with
an average price of $136.91.
Our 16 Clutch Systems in stock come from 6 trusted brands, so you’re sure to find the right part for your 2001 GMC Sierra 1500 without overspending.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2001 GMC Sierra 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Sierra 1500 in top shape, all in one place.
Start shopping confidently below for your 2001 GMC Sierra 1500!
Best-Selling Clutch Pilot Bearings for 2001 GMC Sierra 1500s
Enhance the driving experience in your GMC with 1 quality Clutch Pilot Bearing components, starting at $20.49.
GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1082)
from
$20.49
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Support the end of the transmission input shaft while the clutch is disengaged
- Allows for smooth changing of gears
- Helps keep transmission input shaft properly aligned
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Most Popular 2001 GMC Sierra 1500 Clutch Kits
Customize your GMC with 2 Clutch Kits products
like Clutch Sets, all
priced under $359.99.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.04-204)
from
$359.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
LuK – Original Equipment Quality Replacement Clutch Kit (Part No.04-205)
from
$323.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet® clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.
Product Features:
See More
Product Features:
- Application matched for OE form, fit, and function
- Manufactured with high-quality materials, using cutting edge technology and processes
- Stock photo – Actual parts and materials may vary.
Top Picks for 2001 GMC Sierra 1500 Clutch Master Cylinders
Upgrade GMC Sierra 1500s with top-quality Clutch Master Cylinders parts, including 2 OEM and aftermarket selections for your 2001 model.
LuK – Clutch Master Cylinder (Part No.LMC408)
from
$72.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
Product Features:
See More
Product Features:
- Kit Includes: Clutch Master Cylinder, Pushrod, Pushrod Clap, O-Ring, and Roll Pin
LuK – Pre-Filled Hydraulic Clutch Release System (Part No.CRS039)
from
$198.99
For modern, foot-operated clutches we offer hydraulic release systems that not only replace cable-actuated systems, they also fit into increasingly narrow engine compartments. Because there is no more friction from the cable, clutch wear is lowered dramatically while driving comfort improves.
See More
In-Demand Clutch Slave Cylinders for 2001 GMC Sierra 1500s
Select from 1 premium Clutch Slave Cylinders parts for your 2001 GMC Sierra 1500.
LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC326)
from
$167.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More
Most Sold 2001 GMC Sierra 1500 Flywheels
Explore our best-selling GMC parts for the 2001 Sierra 1500 among 8 OEM and aftermarket options starting from $27.99.
ATP – Automatic Transmission Flex Plate (Part No.Z-271)
from
$94.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-269)
from
$77.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – AT FLEX PLATE (Part No.Z-498)
from
$256.99
AT FLEX PLATE
ATP – Flywheel Ring Gear (Part No.ZA-500)
from
$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- Eliminates grinding from damaged teeth
- Increases starter drive life
Hays – Flexplate GM Ls (Part No.10-030)
from
$205.99
Flexplate GM Ls
LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW387)
from
$267.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
See More
ATP – ATP Flywheel Shim (Part No.GS-8)
from
$27.99
ATP Flywheel Shim
LuK – Original Equipment Quality Replacement Flywheel (Part No.LFW383)
from
$181.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
See More
FAQs for 2001 GMC Sierra 1500 Clutch Systems
Which Clutch Systems are best-sellers for 2001 GMC Sierra 1500s?
Out of 16 Clutch Systems that fit 2001 GMC Sierra 1500s, the following parts are the top sellers:
- Manual Transmission Clutch Pilot Bearing (11944593) – $20.49
- Flywheel Ring Gear (3923452) – $29.99
- LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (10651247) – $167.99
What’s the price range for 2001 GMC Sierra 1500 Clutch Systems?
Clutch System prices for the 2001 GMC Sierra 1500 start at $20.49 and go up to $359.99 for the most premium parts.
What’s the average price of a Clutch System for a 2001 GMC Sierra 1500?
The average price for Clutch Systems for the 2001 GMC Sierra 1500 is $136.91. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Clutch Systems for other GMC Sierra 1500 model years?
What are the cheapest Clutch Systems for my 2001 GMC Sierra 1500?
The cheapest 2001 GMC Sierra 1500 Clutch Systems we carry in stock are:
- Manual Transmission Clutch Pilot Bearing (11944593) – $20.49
- ATP Flywheel Shim (10860864) – $27.99
- Flywheel Ring Gear (3923452) – $29.99
- 10 Millimeter X 1.50 Thread Size, 180000 Psi Tensile Strength, Hex Style Head (11530016) – $29.99
- Differential Cross Shaft (10563551) – $66.99
What are the top-rated Clutch Systems that fit the 2001 GMC Sierra 1500?
Out of 39 reviews by customers, our 2001 GMC Sierra 1500 Clutch Systems have an average customer rating of . These are some of the highest-rated Clutch System types for the 2001 GMC Sierra 1500 and their top-rated products:
- Flywheels
- Automatic Transmission Flex Plate (10087519) – $94.99
- Automatic Transmission Flex Plate (10087517) – $77.99
- AT FLEX PLATE (11238863) – $256.99
What types of Clutch Systems do you sell for my 2001 GMC Sierra 1500?
As of 11/2/25, these are some of the most in-demand types of Clutch Systems for a 2001 GMC Sierra 1500:
Can I get help with 2001 GMC Sierra 1500 Clutch System orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Clutch Systems and more.
What is your return policy for GMC Sierra 1500 Clutch Systems?
Advance Auto Parts keeps returns simple. For new GMC Sierra 1500 Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
