2001 Dodge Ram 1500 Performance and Racing Products

Below you will find various in-demand Dodge Performance and Racing Products, components and accessories for your 2001 Ram 1500. Advance Auto Parts has popular Ram 1500 parts like Performance Oil Filters, Performance Air Filters, Performance Exhaust Products and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Ram 1500 model years including 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 and more. Select a category of 2001 Dodge Ram 1500 Performance and Racing Products below and start saving instantly.

Popular 2001 Dodge Ram 1500 Performance and Racing Products Categories

Performance Oil Filters

Computer Chip Programmers

Performance Air Filters

Performance Coils

Performance Exhaust Mufflers

Performance Distributor Cap and Rotor Kits

Performance Exhaust Headers

Engine Cold Air Intakes

Performance Body Mounts

Performance Steering Stabilizers

Performance Engine Cylinder Head Gaskets

Performance Engine Camshaft and Lifter Kits

Performance Distributor Rotors

Performance Differential Covers

Performance Ignition Modules

Performance Distributor Components

Performance Engine Intake Manifold Gaskets

Performance Engine Valve Cover Gasket Sets

Performance Chassis Bushing Kits

Performance Exhaust Manifold Gaskets

Performance Posi Units and Components

Performance Exhaust Tail Pipes

Performance Leaf Spring Bushings

Performance Ignition Kits

Performance Engine Camshafts

Performance Ring and Pinions

Performance Sway Bar Link Kits

Performance Lower Control Arm Bushings

Performance Sway Bar Bushings

Performance Tie Rod End Boots

Performance Engine Push Rod Guideplates

Performance Engine Push Rods

Essential Performance and Racing Products for 2001 Dodge Ram 1500s

from

$15.99

Competition design uses a stud, washer & nut to secure the clamp rather than a bolt. The clamp itself is also chromed.

Product Features:

Rolled Edges For Strength
Ideal For Magnetos
Ideal For Ignition Distributor

from

$78.99

Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, crisper throttle response and more high RPM power. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Uf-198
MSD 8228
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$344.99

Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts.

Product Features:

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$34.99

Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$104.99

For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:

Maintains Better Alignment While Driving
Full Floating and Non Binding
Fits Into the Remaining Stock Control Arms

from

$89.99

Ideal for off-road driving, towing and street applications, Rancho RS5000 steering stabilizers enhance a vehicle’s performance and minimize on-road and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:

IMPROVED HANDLING AND PERFORMANCE – Reduces wheel shimmy, bump steer and vibration which helps minimize on-road or off-road driver fatigue
ACCOMMODATES LARGER TIRES – Engineered for vehicles with oversized wheels and tires
ENGINEERED TO LAST – Features protective boot to safeguard shock rod and oil seal
HANDLES EXTREME TEMPERATURE CHANGES – Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248 degree F
BUY WITH CONFIDENCE – Comes with Rancho’s Limited Warranty

from

$49.99

Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.

Product Features:

Manufactured from high-temperature steel core/graphite faced exhaust material
Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
Conforms to and seals minor surface irregularities
Can be trimmed if necessary for modified port applications
For OE replacement, high performance street, drag race and oval track use
Anti-Stick Properties
Easy Removal For Disassembly

from

$123.99

Ditch that plain-Jane stock appearance once and for all. AVS Hood Scoops add 200HP in looks alone. Its heat-resistant, UV-protected, thermoplastic material is built to last a lifetime delivering unmistakable eye appeal wherever you go. Available in smooth black nish with paintable surface so you can match your factory paint if you like. Choose from several styles and sizes in 1- and 2-piece options. Cleanly mounts with 3M automotive-grade adhesive tape concealed. . Proudly made in the USA with global materials.

Product Features:

Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
Made In The USA With Global Materials.

from

$425.99

Revolutionary handheld tuner quickly and easily reprograms your vehicle for more power across the entire rpm range! 50 State Legal!

Product Features:

Average gains in excess of 30 HP/40 ft.-lbs. for gas and 80 HP/150 ft.-lbs. diesel*
HD 2.8¿ color screen with updated interface for easier and faster modifications
HD 2.8┐ color screen with updated interface for easier and faster modifications
Increased memory and faster processor for improved tuning plus faster updating
Active fuel management control*
Performance test (0-60, ╝ mile testing)
Performance test (0-60, ¼ mile testing)
Internet updating using PC software
Tire size adjustment
Axle gear ratio adjustment
Shift point and firmness adjustment*
Speed and rev limiter adjustments*
Carb EO # D-745
Diagnostic capability ¿ read and clear trouble codes with explanation of codes
Diagnostic capability ┐ read and clear trouble codes with explanation of codes

from

$425.99

This K&N NextGen cold air intake system is engineered for your DODGE/RAM 1500 V8-5.7L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 43.2 percent to your engine and provides an increase of 17.62 horsepower and 28.50 torque with no tune required. This intake system is paired with a washable, reusable High-Flow lifetime Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

Dyno-Proven Performance – Dyno-proven to deliver a guaranteed increase in horsepower and torque on your engine’s stock tune. Experience the exciting roar of your engine during acceleration, without any drone at cruising speeds.
NextGen Airbox – The hybrid airbox features a semi-enclosed airbox that helps lower air temperatures, an enlarged fresh air inlet for improved airflow, and better protection against contaminants.
Oversized Air Filter – An oversized air filter features an increased surface area and a radius-entry design, both engineered to increase airflow and enhance performance.
Large-Diameter Tube – The large-diameter, CAD-designed intake tube features strategically positioned air channels that increase airflow, boosting airspeed and delivering more air to your engine for added performance.
Precision Engineering – Each NextGen intake is precisely engineered for your vehicle, enhancing the style of your engine bay while increasing horsepower, torque, and airflow.
Simplified Installation – The simplified design reduces mounting hardware, while Quick-Lock technology allows the filter to snap into place. A sealing bead secures the system with just one hose clamp.
50 plus Years of Trusted Protection – Since 1969, K&N filters have delivered superior filtration, extended cleaning intervals, and proven performance, trusted by racers and enthusiasts alike.
Warranty – K&N NextGen intakes come with a No-Hassle Limited Warranty, preserving your factory warranty. Designed and engineered in the USA since 1969, K&N provides dedicated, USA-based customer service.

from

$18.99

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$531.99

Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods.

Product Features:

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$29.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

from

$61.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY : Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM : Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS: Made from stainless steel for durability and long life
BETTER TOGETHER : Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

from

$237.99

Everything you need to Super Tune Up your truck, van, or Jeep engine! The kits includes a high performance cap and rotor. A set of 8mm Extreme 9000 Spiral Core wires. This kit also includes the ACCEL classic copper core spark plugs to fire your engine up.

Product Features:

Complete Super Tune Kit
8mm Spiral Core Wires
Accel Classic Core Plugs
High Performance Cap And Rotor
Reduced Emissions

from

$72.99

This MSD to Dodge harness is designed to provide a splice free and simple installation of an MSD Ignition control to late model Dodge vehicles equipped with the coil.

Product Features:

Plug-In Harness w/Color Coded Wires
No Cutting Or Splicing
Quick Easy Installation
Provides A Direct Plug-In Installation
When Adding An MSD Ignition Control

from

$79.99

Spectre’s 12 bolt Differential Covers feature a triple chrome plated steel construction. Designed to perform as well as they look, these covers fit a variety of vehicles. Use the Spectre application search for vehicle specific lookup. Includes 12 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:

Triple chrome plated steel
Gasket included
12 bolt design
12 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included

from

$34.99

Allows Sway Bar System to Work At 100% Efficiency
Zerk Type Fittings
Allows for Periodic Greasing
Lasts Much Longer Than OEM Rubber Bushings
Handling Characteristics Improve Dramatically

from

$92.99

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

Made of Superior Hyper-Flex+ Material
Adds Dramatic Amount of Performance/Durability
Helps Vehicle Be in Control
Allows the Suspension to Function Properly

from

$360.99

RngPnn

from

$49.99

This Spectre OEM replacement air filter is an easy to install performance option for the stock panel shaped air filter in multiple Dodge, Jeep & Mitsubishi applications. With its performance synthetic air filter media, this air filter has been designed to add horsepower and quicker acceleration by allowing more air flow into your engine than ordinary paper filters. This air filter’s sealing edge was engineered to insure a proper air box seal and great engine protection.

Product Features:

Replaces the factory air filter
Fits perfectly in your stock air box
Engineered for increased flow and greater performance
Fits select Jeep, Dodge, & Mitsubishi models
Factory pre-oiled and ready to use
Simple installation

from

$493.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$19.99

ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.

Product Features:

Max stability for all RPM ranges
Heavy duty for maximum energy transfer

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$101.99

Product Features:

MINI SPOOL – DANA 44, 30 SPL.

Upgrade your 2001 Dodge Ram 1500 with Top-Quality Performance and Racing Products

When it comes to maintaining or upgrading your 2001 Dodge Ram 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Dodge or enhancing its overall performance, Performance and Racing Products are key to keeping your Ram 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 68 Performance and Racing Products for the 2001 Dodge Ram 1500, designed to meet your needs without breaking the bank. From Performance Oil Filter replacements to Performance Air Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2001 Dodge Ram 1500 at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $1,398.99, with an average price of $222.98. Our 68 Performance and Racing Products in stock come from 17 trusted brands, so you’re sure to find the right part for your 2001 Dodge Ram 1500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Dodge Ram 1500, we stock popular OEM and aftermarket Performance and Racing Products from top names like K&N, Spectre, Accel, and more. K&N Performance and Racing Products start at just $17.99 and boast an impressive 4.8 stars average rating from customers. Spectre and Accel also bring quality to the table, with Performance and Racing Products available starting at $19.99, and at an average 4.2 stars rating. With 2,390 customer reviews and counting, our 2001 Dodge Ram 1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Dodge Ram 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Ram 1500 in top shape, all in one place. Start shopping confidently below for your 2001 Dodge Ram 1500!

Best-Selling Performance Oil Filters for 2001 Dodge Ram 1500s

Enhance the driving experience in your Dodge with 1 quality Performance Oil Filter components, starting at $17.99.

show more show less

from

$17.99

K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:

HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
EASY TO REMOVE: Fast and easy Wrench-Off removal
HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers

Top Picks for 2001 Dodge Ram 1500 Performance Exhaust Products

Upgrade Dodge Ram 1500s with top-quality Performance Exhaust Products parts, including 6 OEM and aftermarket selections for your 2001 model.

show more show less

from

$149.99

The Super 40 features Flowmaster’s Delta Flow technology. It’s larger case profile provides the best of both worlds of performance and sound. The Super 40 has that deep powerful sound of the Original 40 series but with all the benefits of performance and low interior resonance from the Delta Flow technology. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.

from

$89.99

Product Features:

Large internal flow tubes improve exhaust flow and reduce backpressure
Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
Dyno proven to flow up to 700 SCFM
Dyno proven to flow up to 700 SCFM

from

$449.99

Product Features:

Bolt On Quickly And Easily
Top Performance/Clean Machine
Increased Efficiency
Leak Free Seal
Connects To Exhaust Head Pipe
Complete With Premium Gaskets
16-Gauge Tubing For Durability

from

$156.99

DynoMax Ultra Flo Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone. The ‘Pure Unadulterated POWER’ of DynoMax Ultra Flo Welded mufflers are backed by a Limited Warranty and limited Performance & Sound Guarantee.

Product Features:

Stainless steel construction for lifelong protection
100% welded design for maximum durability
Straight through design ensures unrestricted exhaust flow and reduces back pressure
CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
Dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower.

from

$20.99

Header Gasket Set

from

$92.99

Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

Product Features:

IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade

In-Demand Performance Ignition Products for 2001 Dodge Ram 1500s

Select from 4 premium Performance Ignition Products parts for your 2001 Dodge Ram 1500, with prices ranging from $38.99 to $123.99.

show more show less

from

$38.99

Allows you to directly plug into the ACCEL PN 140021 Super coil when being used on a 1998 to 2002 Dodge truck, or Jeep equipped with a distributor and the newer light grey Yazaki wire harness coil connector. No cutting or splicing is required.

Product Features:

Nice Clean Connection
Easy Installation

from

$78.99

10-15% More Energy
Direct Plug In Replacement Direct OE Fit
Advanced Bobbin Technology
Standard Motor Products SMP Uf-198
MSD 8228
Improved Idle Quality
Resists Shock And Vibration
Resists Corrosion

from

$123.99

Its High-Impact / UV Protected Thermoplastic Material Is Heat Resistant And Built To Last A Lifetime.
Available In Smooth Black Finish. If You Like / Deck Out Its Paintable Surface To Match Your Vehicles Paint Color.
No Drilling Required – Attach With The Included 3M Automotive-Grade Adhesive Tape And Youre Ready To Hit The Road.
Specially Designed To Conceal Adhesive Tape On The Underside Of Hood Scoop.
AVS Hood Scoops Come In Both One- And Two-Piece Configurations To Suit Your Personal Style.
Made In The USA With Global Materials.

from

$72.99

This MSD to Dodge harness is designed to provide a splice free and simple installation of an MSD Ignition control to late model Dodge vehicles equipped with the coil.

Product Features:

Plug-In Harness w/Color Coded Wires
No Cutting Or Splicing
Quick Easy Installation
Provides A Direct Plug-In Installation
When Adding An MSD Ignition Control

Most Sold 2001 Dodge Ram 1500 Performance Engines

Explore our best-selling Dodge parts for the 2001 Ram 1500 among 26 OEM and aftermarket options starting from $14.99.

show more show less

from

$344.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$18.99

Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
Not intended for use in emission controlled vehicles.

from

$44.99

Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions.

Product Features:

Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
Raises combustion sealing force to roughly three times that of standard head gaskets.
Steel wire rings for the greatest combustion seal strength.
Not intended for use in emission controlled vehicles.

from

$37.49

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$297.99

An older member of the COMP Cams grind family, the Magnum series of camshafts offers excellent performance gains over stock without the added wear and tear associated with more aggressive camshafts.

Product Features:

Best with aftermarket torque converters and 9.5:1 compression.
Great high RPM power.
Easy on valve train parts.
Can be used with mild ratio rocker arms and traditional performance valve springs.

from

$257.99

Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications.

Product Features:

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1398.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$1398.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$970.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

XE Computer Controlled 212/218 Hydraulic Roller Cam for Chrysler Magnum

from

$787.99

XE Computer Controlled 212/218 Hydraulic Roller Cam for Chrysler Magnum

XE Computer Controlled 206/212 Hydraulic Roller Cam for Chrysler Magnum

from

$787.99

XE Computer Controlled 206/212 Hydraulic Roller Cam for Chrysler Magnum

XE Computer Controlled 216/224 Hydraulic Roller Cam for Chrysler Magnum

from

$787.99

XE Computer Controlled 216/224 Hydraulic Roller Cam for Chrysler Magnum

from

$591.99

CPU 210/220HRLCHRMAG

from

$591.99

CPU 199/206HRLCHRMAG

from

$578.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$531.99

Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
Best with aftermarket converters and more rear gear.
Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.

from

$436.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$394.99

Good blend of efficiency and performance.
Perfect choice for performance street rebuilds.
Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.

from

$344.99

SMALL BLOCK CHRYSLER HYDRAULIC CAM AND LIFTER KIT – Xtreme Energy: Great for street machines, largest cam for stock converter, 273-318 works best with 2000 stall.

Product Features:

Cam and lifter kit for Small Block Chrysler engines
CL-Kit includes cam, lifters, assembly lube, instructions and decals
HYDRAULIC – Xtreme Energy: Great for street machines, largest cam for stock converter, 273-318 works best with 2000 stall.
268/280 Advertised Duration, 224/230 Duration @ .050″, .477″/.480″ Lift, 110 Lobe Separation
Valve spring upgrade required

from

$327.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$297.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

from

$284.99

Excellent performance in street carbureted applications.
More vacuum allows an increase in duration for improved performance and assists power brakes.
Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.

Magnum 6.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$225.99

Magnum 6.800" Long, .080" Wall, 5/16" Diameter Pushrod Set

from

$29.99

Product Features:

Clean Positive Seal
Embossed Silicone Bead Surrounding The Port
Matched To Manifolds And Cylinder Heads

Top-Rated Performance and Racing Products Brands For Your 2001 Dodge Ram 1500

Shop for the best-rated brands offering Performance and Racing Products and other products for your 2001 Dodge Ram 1500s. Below you’ll find some of our best rated Performance and Racing Products from K&N, Spectre, and Accel, and more. Performance and Racing Products from these brands that fit a 2001 Ram 1500 start at just $17.99 and are rated as high as 4.8 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

Popular K&N 2001 Dodge Ram 1500 Performance and Racing Products

When it comes to maintaining or upgrading your 2001 Dodge Ram 1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. K&N ticks all of those boxes. We offer a wide selection of K&N Performance and Racing Products, specifically designed for the 2001 Dodge Ram 1500. With over 2 K&N brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $17.99, with an average price of just $192.99. Plus, with over 141 customer reviews and an average rating of 4.8 stars, you can trust that our K&N Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $17.99

(120)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

“All good, right filter for 1973 volvo.”

from $367.99

(21)

Cold Air Intake: Adds Up To 12 Horsepower, With Million Mile Air Filter

“I could tell the difference within a couple of days.”

Popular Spectre 2001 Dodge Ram 1500 Performance and Racing Products

Spectre auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2001 Dodge Ram 1500 owner should feel confident when installing genuine Spectre parts in their vehicle. To ensure the best fit and performance for your 2001 Ram 1500, Advance Auto Parts carries a full inventory of 2 Spectre Performance and Racing Products. Plus you will be keeping your Dodge in peak condition while saving money because prices on these Spectre Performance and Racing Products range from $49.99 to $79.99, plus, with more than 12 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

from $49.99

(11)

Spectre Replacement Air Filter

“Perfect fit! Improved performance!”

from $79.99

(1)

Differential Cover

“cover has a nice chrome finish, and its great to have a treaded plug to check oil level. The chrome 5/16 hardware was too long but my grinder made qui”

FAQs for 2001 Dodge Ram 1500 Performance and Racing Products

Which Performance and Racing Products are best-sellers for 2001 Dodge Ram 1500s?

Out of 68 Performance and Racing Products that fit 2001 Dodge Ram 1500s, the following parts are the top sellers:

Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (18290065) – $89.99
Steering Damper RS5000 (18580997) – $89.99
Super 40 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (20290718) – $149.99

What’s the price range for 2001 Dodge Ram 1500 Performance and Racing Products?

Performance and Racing Product prices for the 2001 Dodge Ram 1500 start at $9.99 and go up to $1,398.99 for the most premium parts.

What’s the average price of a Performance and Racing Product for a 2001 Dodge Ram 1500?

The average price for Performance and Racing Products for the 2001 Dodge Ram 1500 is $222.98. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Performance and Racing Products for other Dodge Ram 1500 model years?

Yes, we currently carry Performance and Racing Products for 15 model years of Dodge Ram 1500s between 1994 and 2010. Performance and Racing Products are bought most frequently for the following model years: 2010, 2009, 2008, 2007, 2006, 2005, 2004, 2003, and 2002.

What are the cheapest Performance and Racing Products for my 2001 Dodge Ram 1500?

The cheapest 2001 Dodge Ram 1500 Performance and Racing Products we carry in stock are:

Tie Rod Dust Boot (17360821) – $9.99
Tie Rod Dust Boot (22906874) – $9.99
Tie Rod Dust Boot (22906816) – $9.99
Tie Rod Dust Boot (22906817) – $9.99
Magnum 6.800" Long, .080" Wall, 5/16" Diameter Pushrod (50289645) – $14.99

What are the top-rated Performance and Racing Products that fit the 2001 Dodge Ram 1500?

Out of 2,390 reviews by customers, our 2001 Dodge Ram 1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2001 Dodge Ram 1500 and their top-rated products:

Performance Air Filters
- Spectre Replacement Air Filter (10162699) – $49.99
Performance Oil Filters
- Spectre Replacement Air Filter (10162699) – $49.99
Performance Steering Products
- Spectre Replacement Air Filter (10162699) – $49.99

What types of Performance and Racing Products do you sell for my 2001 Dodge Ram 1500?

As of 11/2/25, these are some of the most in-demand types of Performance and Racing Products for a 2001 Dodge Ram 1500:

Can I get help with 2001 Dodge Ram 1500 Performance and Racing Product orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Dodge Performance and Racing Products and more.

What is your return policy for Dodge Ram 1500 Performance and Racing Products?

Advance Auto Parts keeps returns simple. For new Dodge Ram 1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

2001 Dodge Ram 1500 Performance and Racing Products

Mr. Gasket – Chrome Distributor Hold-Down Clamp (Part No.2503)

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-221-3)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

Energy Suspension – Sway Bar Bushing Set (Part No.5.5127R)

Energy Suspension – Control Arm Bushing Set (Part No.5.3137G)

Rancho – Steering Damper RS5000 (Part No.RS5412)

Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.7594)

Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)

Accel – Handheld Computer Programmer for Enhanced Performance and Tuning Control (Part No.49505)

K&N – NextGen Cold Air Intake: Adds Up To 17.6 Horsepower, With Washable Air Filter (Part No.50-1561)

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam (Part No.20-601-9)

Edelbrock – Intake Manifold Gasket for 1992-Later Chrysler Magnum engines (Part No.7277)

Dynomax – Exhaust Tail Pipe (Part No.53661)

Accel – Tst Dodge99-01 5.2L 99-02 5.9L (Part No.TST24)

MSD Ignition – Harness; Dodge/Chrysler; 98-03 (Part No.8884)

Spectre – Differential Cover (Part No.6089)

Energy Suspension – Sway Bar Bushing Set (Part No.5.5127G)

Energy Suspension – Leaf Spring Bushing Set (Part No.5.2109G)

Richmond Gear – RngPnn (Part No.69-0053-1)

Spectre – Spectre Replacement Air Filter (Part No.HPR3901)

Energy Suspension – Hyper-Flex System (Part No.5.18109R)

Accel – Rotor:Dodge Magnum V6/V8 (Part No.130328)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1008)

Motive Gear – Differential Mini Spool (Part No.MSD44-30)

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2004)

Spectre – Spectre Replacement Air Filter (Part No.HPR3901)

Flowmaster Inc. – Super 40 Series Muffler, 2.5in Center Inlet 2.5in Offset Outlet, Non-Reversible, Aggressive Sound (Part No.952547)

Dynomax – Super Turbo Exhaust Muffler: Universal Fit, Aluminized Steel, 13" L, 3" In, 2.5" Out, Oval (Part No.17674)

Flowtech – Shorty; Smog Headers (Part No.91945FLT)

Dynomax – Ultra Flo Exhaust Muffler: Universal Fit, Stainless Steel, 14" L, 3" In, 2.5" Out, Oval (Part No.17228)

Flowtech – Header Gasket Set (Part No.99361FLT)

Dynomax – Exhaust Tail Pipe (Part No.55035)

Accel – Adp.Harness 98/Newer Mopar (Part No.140021AH)

Accel – High-Performance Ignition Coil – Direct OE Fit (Part No.140021)

Auto Ventshade (AVS) – Eclipse, Large Hood Scoops (Part No.80001)

MSD Ignition – Harness; Dodge/Chrysler; 98-03 (Part No.8884)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-221-3)

FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)

FEL-PRO Performance – Performance Cylinder Head Gasket (Part No.1008)

FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1608)

Competition Cams – Magnum 230/230 Hydraulic Flat Cam (Part No.20-232-4)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam (Part No.20-212-2)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam K-Kit (Part No.K20-208-2)

Competition Cams – High Energy 218/218 Hydraulic Flat Cam K-Kit (Part No.K20-212-2)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-208-2)

Competition Cams – XE Computer Controlled 212/218 Hydraulic Roller Cam for Chrysler Magnum (Part No.20-745-9)

Competition Cams – XE Computer Controlled 206/212 Hydraulic Roller Cam for Chrysler Magnum (Part No.20-744-9)

Competition Cams – XE Computer Controlled 216/224 Hydraulic Roller Cam for Chrysler Magnum (Part No.20-746-9)

Competition Cams – CPU 210/220HRLCHRMAG (Part No.20-604-9)

Competition Cams – CPU 199/206HRLCHRMAG (Part No.20-608-9)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam K-Kit (Part No.K20-222-3)

Competition Cams – Mutha’ Thumpr 235/249 Hydraulic Roller Cam (Part No.20-601-9)

Competition Cams – High Energy 206/206 Hydraulic Flat Cam (Part No.20-208-2)

Competition Cams – High Energy 212/212 Hydraulic Flat Cam (Part No.20-210-2)

Competition Cams – Xtreme Energy 224/230 Hydraulic Flat Cam and Lifter Kit (Part No.CL20-223-3)

Competition Cams – Xtreme Energy 218/224 Hydraulic Flat Cam (Part No.20-222-3)

Competition Cams – Xtreme Energy 230/236 Hydraulic Flat Cam (Part No.20-224-4)

Competition Cams – Xtreme Energy 212/218 Hydraulic Flat Cam (Part No.20-221-3)

Competition Cams – Magnum 6.800" Long, .080" Wall, 5/16" Diameter Pushrod Set (Part No.7632-16)

Edelbrock – Intake Manifold Gasket for 1992-Later Chrysler Magnum engines (Part No.7277)