2001 Chevrolet Express 1500 Performance and Racing Products
Find Your Specific 2001 Chevrolet Express 1500 Performance and Racing Products
Below you will find various in-demand Chevrolet Performance and Racing Products, components and accessories for your 2001 Express 1500. Advance Auto Parts has popular Express 1500 parts like Performance Ignition Products, Performance Exhaust Products, Performance Distributors and more. You’ll also find aftermarket and OEM Performance and Racing Products for other Express 1500 model years including
2006,
2007,
2008,
2009,
2010,
2011,
2012,
2013,
2014 and more. Select a category of 2001 Chevrolet Express 1500 Performance and Racing Products below and start saving instantly.
Popular 2001 Chevrolet Express 1500 Performance and Racing Products Categories
Essential Performance and Racing Products for 2001 Chevrolet Express 1500s
Motive Gear – Performance Differential Ring and Pinion (Part No.G885513)
PerTronix – D660701 Rotor Flame-Thrower Billet Distributor (Part No.D660701)
from
$19.99
Parts and accessories for Flame-Thrower Billet Distributors offer unmatched quality and accommodate the performance levels your distributor was engineered for.
Product Features:
See More
Product Features:
- Rotor for Flame-Thrower cast distributors
- Replacement premium rotor with brass contact.
MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)
from
$219.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Mr. Gasket – Valve Cover (Part No.9415)
from
$124.99
Chrome plated steel valve covers with original equipment height and internal baffle. Features one breather/oil fill cap opening per valve cover. Sold as a pair. Hardware and gaskets sold separately.
Product Features:
See More
Product Features:
- Chrome plated steel construction
- Center bolt design with ribbed top
- Has two openings in one cover & one opening in the other
- Includes rubber grommets and chrome oil filler cap
- Sold as a pair
- Has Ribs On The Top Of Each One
Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)
from
$84.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Brass inserts provide for high spark energy flow
- Polyester Glass Filled For Durability
- Heavy duty for maximum energy transfer
MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)
from
$614.99
Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and billet aluminum base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Supplied w/Socket Style Distributor Cap And Rotor
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Competition Cams – XFI XE-R 232/234 Hydraulic Roller Cam (Part No.54-446-11)
from
$541.99
HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – XFI XE-R: Xtreme Energy XE-R design for standard displacement LS6 and LS1. Race only applications. Custom tuning required.
- 281/283 Advertised Duration, 232/234 Duration @ .050″, .595″/.598″ Lift, 112 Lobe Separation
- Use Dual Valve Spring part No. 26925-16 with this camshaft
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Hays – Flywheel: GM Ls-1 30Lb Steel (Part No.10-730)
from
$527.99
Hays aluminum flywheels are manufactured from certified billet material that will not break up under the stress of high RPM and severe punishment of racing. Features replaceable steel surface insert. Precision balanced to either neutral (internal) or Detroit (external) specifications. Meets SFI specification 1.1 for racing.
Product Features:
See More
Product Features:
- Certified Billet Material
- Borg and Beck Clutch Pattern
- Long-Style Clutch Pattern
- Ring Gear Securely Mounted To Prevent Spinning
Bully Dog – Vehicle Performance Enhancer: Engine Tuner, Monitor, Gauge, & Diagnostic Device (Part No.40417)
from
$469.99
This Bully Dog GT Platinum tuner is four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device.ÿ
Product Features:
See More
Product Features:
- Dramatically improves the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions.
- Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
- Product might not be available in all states due to local laws.
SCT Performance – Performance Tuner with Cloud-Based Tune Delivery and Customizable Gauges (Part No.40490)
from
$456.99
The BDX hand-held performance tuner gives drivers the edgepower they need, whether tackling tough terrain, pulling a heavy payload, or maximizing fuel economy on the highway. Its sleek design, full-color display, and customizable gauges help track and adjust powertrain performance to deliver more horsepower and torque when it’s needed most. Cloud-based tune delivery over built-in WiFi means that the BDX will always be running the latest tuning – enabling drivers to stay one step ahead of the packÿ.
Product Features:
See More
Product Features:
- Monitor and display vehicle data using the on-screen virtual gauges.
- Preloaded, street-tested, dyno-proven tunes boost horsepower, torque, and throttle sensitivity.
- Reads and clears DTC (Diagnostic Trouble Codes) with ease
- Product might not be available in all states due to local laws.
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Mr. Gasket – Thermocap Radiator Cap (Part No.2471S)
from
$53.99
Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Product Features:
See More
Product Features:
- Indicates Coolant Temperature
- Helps to Prevent Injuries from coolant or steam burns
- Integrated Coolant Reclamation Valve
- Improves Underhood Appearance
- Fahrenheit and centigrade readings
- Various valve pressures available
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
B & M – Automatic Shifter, Z-Gate (Part No.80681)
from
$306.99
Reverse lockout meets NHRA and IHRA requirements. Includes neutral safety switch, backup light switch, black T-Handle. Fits most 3 Speed applications.
Product Features:
See More
Product Features:
- Base Trims To Custom Fit Floor
- NHRA/IHRA Reverse Lockout Meets Requirements
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Black T-Handle and Cable
B & M – Automatic Shifter, Street Bandit Shifter (Part No.80797)
from
$869.99
The ultimate shifter for automatic transmission equipped street vehicles! The Hi-Tek Street bandit has all the same feature as the above Street Bandit line of shifters, with an interchangeable billet knob design.
Product Features:
See More
Product Features:
- Ideal For High-Tech Pro-Street
- Ideal For High-Tech Street Rods
- Narrow Styled Aluminum Housing
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Billet Aluminum Knob
- Can Be Used w/Reverse Pattern Valve Body
B & M – Automatic Shifter, Magnum Grip Street Bandit (Part No.81050)
from
$799.99
The B&M Racing Street Bandit Pistol-grip shifter is perfect for the person looking for a gated performance shifter in a compact good looking package which can be mounted in door cars. The Street Bandit features replaceable 2, 3 or 4 speed forward pattern gate plates along with a 3 speed reverse pattern gate plate, all guaranteeing you won’t miss a shift. Other features include a back-up light switch, neutral safety switch, brushed aluminum cover, CNC aluminum Magnum Grip shift handle, a 5ft Super Duty cable, all brackets, levers and instructions for an easy installation. Be sure to check out all our optional side grip plates including real Rosewood engraved with the B&M logo part #81086, CNC billet aluminum side plates with 12 volt micro-switch #81060, 81063, 81078 and coming soon optional colored side plates to customize the look of the shifter. Also see optional floor mounting bracket #80884
Product Features:
See More
Product Features:
- Ideal For High-Tech Pro-Street
- Ideal For High-Tech Street Rods
- Narrow Styled Aluminum Housing
- Includes Neutral Safety Switch
- Includes Backup Light Switch
- Includes Billet Aluminum Knob
- Can Be Used w/Reverse Pattern Valve Body
Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
Mr. Gasket – Intake Gasket (Part No.136G)
from
$51.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Edelbrock – Intake Manifold Gasket for E-Tec 170 Small-Block Chevy (Part No.7235)
from
$47.99Product Features:
- Clean Positive Seal
- Embossed Silicone Bead Surrounding The Port
- Matched To Manifolds And Cylinder Heads
Upgrade your 2001 Chevrolet Express 1500 with Top-Quality Performance and Racing Products
When it comes to maintaining or upgrading your 2001 Chevrolet Express 1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Performance and Racing Products are key to keeping your Express 1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 56 Performance and Racing Products for the 2001 Chevrolet Express 1500, designed to meet your needs without breaking the bank.
From
Performance Ignition Product
replacements to
Performance Exhaust Products
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 2001 Chevrolet Express 1500 at great prices.
Our Performance and Racing Products inventory for this model
ranges from just $8.99 to $921.99, with
an average price of $348.17.
Our 56 Performance and Racing Products in stock come from 10 trusted brands, so you’re sure to find the right part for your 2001 Chevrolet Express 1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Chevrolet Express 1500, we stock popular OEM and aftermarket Performance and Racing Products from top names
like FEL-PRO Performance, MSD Ignition, B & M, and more.
FEL-PRO Performance Performance and Racing Products
start at just $31.49 and boast an impressive 4.2 stars average rating from customers.
MSD Ignition and B & M also bring quality to the table, with Performance and Racing Products available starting at $219.99, and at an average 4.2 stars rating.
With 750 customer reviews and counting, our 2001 Chevrolet Express 1500 Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2001 Chevrolet Express 1500 is always ready to roll. We’re committed to providing you with everything you need to keep your Express 1500 in top shape, all in one place.
Start shopping confidently below for your 2001 Chevrolet Express 1500!
Best-Selling Performance Ignition Products for 2001 Chevrolet Express 1500s
Enhance the driving experience in your Chevrolet with 1 quality Performance Ignition Product components, starting at $219.99.
MSD Ignition – Wire Set; Super Conductor; Chevy Tahoe; Sub. Vortec V8; 96-97 (Part No.32169)
from
$219.99
The MSD 8.5mm super conductor wire is the performance wire. Engineered from the inside out, the 8.5 offers everything you have ever wanted in a wire; incredibly low resistance without electronic interference. In a single 12 inch length of super conductor wire there is only 40 – 50 ohms of resistance. That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective electro magnetic interference (EMI) or choke. This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. Available in universal kits and bulk lengths.
Product Features:
See More
Product Features:
- Bolt-on Performance
- Custom Fit For Make And Model Listed
- Wires Are Pre-Cut To Exact Specifications
- Conductor core features DuPont Kevlar material for increased tensile strength
- Durable outer sleeve is a proprietary compound for resistance to high heat or abrasion
- Stainless steel terminals feature dual crimp tabs to grip wire conductor and outer jacket separately
Most Popular 2001 Chevrolet Express 1500 Performance Exhaust Products
Customize your Chevrolet with 2 Performance Exhaust Products products
like Performance Exhaust Manifold Gaskets, all
priced under $31.49.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1444)
from
$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1402)
from
$28.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
- Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
- Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
- Slotted bolt holes allow for easier header installation.
- Not intended for use in emission controlled vehicles.
Top Picks for 2001 Chevrolet Express 1500 Performance Distributors
Upgrade Chevrolet Express 1500s with top-quality Performance Distributors parts, including 4 OEM and aftermarket selections for your 2001 model.
MSD Ignition – Distributor; Billet; Chevy V6 Even-Fire (Part No.8597)
from
$614.99
Starting on the inside, a 0.500 In. oversized steel shaft spins in a sealed ball bearing and sintered bushing for long endurance and accurate spark delivery throughout the entire RPM range. Mounted on top of the shaft is an easy-to-adjust chromoly mechanical advance assembly. Different advance springs and stop bushings are supplied so you can choose from 24 curves. A maintenance-free magnetic pick-up provides accurate trigger signals to your MSD Ignition control. A precision-manufactured reluctor that is connected to the shaft is responsible for triggering the pick-up. The distributor is topped off with a high quality black cap and race rotor.
Product Features:
See More
Product Features:
- CNC machined billet aluminum housing and billet aluminum base
- Will not accept a vacuum advance canister
- Must Be Used w/An MSD Ignition Control
- O-ring seals can be installed for oil press. control (Mods only)
- Supplied w/Socket Style Distributor Cap And Rotor
- Special oil tract improves lubrication to the dist./cam gear
- Nylon pads ensure smooth operation of the advance weights
- Advance weight pins are staked and tig welded to the plate
Accel – High-Performance Distributor Rotor for GM 4.3L-7.4L Engines (Part No.130141)
from
$32.99
ACCEL Hi-Performance rotors offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability and resist centrifugal forces at high racing RPMs.
Product Features:
See More
Product Features:
- Max stability for all RPM ranges
- Heavy duty for maximum energy transfer
- Fits Most Stock And Modified Distributors
- Polyester Glass Filled For Durability
Accel – Chevy/GMC Vortec V6 High Performance Distributor Cap (Part No.120142)
from
$84.99
ACCEL Heavy-Duty Caps offer superior protection from arc-thru and crossfire. Features hi-performance 60,000 volt alkyd compound, stress-relieved at molding to ensure stability.
Product Features:
See More
Product Features:
- Fits Most Stock And Modified Distributors
- Brass inserts provide for high spark energy flow
- Polyester Glass Filled For Durability
- Heavy duty for maximum energy transfer
MSD Ignition – Distributor Gear; MSD Chevy Distributor; .500 ID; Iron (Part No.8531)
from
$60.99
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.
Product Features:
See More
Product Features:
- Increased outer hardened layer thickness (RC 55-60)
- Micro Polished Surface For Smooth Contact
- Proprietary formulated ductile iron.
- Melonite QPQ coated reduces friction and initial wear
- Interstitial carbide improves wear resistance/running properties
In-Demand Performance Engines for 2001 Chevrolet Express 1500s
Select from 25 premium Performance Engines parts for your 2001 Chevrolet Express 1500, with prices ranging from $8.99 to $921.99.
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$42.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1004)
from
$44.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1603)
from
$31.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1602)
from
$23.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Die cut silicone rubber gaskets conform to out-of-flat covers
- Great for on-again/off-again situations
- Not intended for use in emission controlled vehicles.
B & M – Tork Master 2000: Value-Priced Street Performance Torque Converter (Part No.70420)
from
$459.99
Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1010)
from
$51.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Mr. Gasket – Intake Gasket (Part No.136G)
from
$51.99
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Manufactured from cellulose/nitrile composition gasket material
- Provides excellent sealing and durability
- Die-cut for an excellent fit
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
B & M – Torque Converter, Holeshot 3000 (Part No.70421)
from
$921.99
The Holeshot Converter is a very good choice for the typical street machine that is looking for better launch capability and more strength. With a furnace brazed turbine, New turbine hub and dual pattern drive lugs on some GM Holeshots.
Product Features:
See More
Product Features:
- Furnace Brazed Impeller
- Steel Alloy Pump Drive Tube
- Heavy Duty Needle Bearing
- Between Stator and Turbine
- Furnace Brazed Turbine
Competition Cams – Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-460-8)
from
$815.99
Magnum Computer Controlled 215/220 Hydraulic Roller Cam Chevrolet 262/4.3L V6
Competition Cams – Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-410-8)
from
$815.99
Magnum 206/206 Hydraulic Roller Cam for Chevrolet 262/4.3L V6
Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6 (Part No.56-450-8)
from
$815.99
Magnum Computer Controlled 210/215 Hydraulic Roller Cam Chevrolet 262/4.3L V6
Competition Cams – Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6 (Part No.56-430-8)
from
$815.99
Magnum 224/224 Hydraulic Roller Cam for Chevrolet 262/4.3L V6
Competition Cams – Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-422-8)
from
$611.99
Magnum 215/220 Hydraulic Roller Cam For Chevrolet 262/4.3L
Competition Cams – Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-415-8)
from
$611.99
Magnum Computer Controlled 210/215 Hydraulic Roller Cam For Chevrolet 262/4.3L
Competition Cams – Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L (Part No.09-430-8)
from
$611.99
Magnum 224/224 Hydraulic Roller Cam For Chevrolet 262/4.3L
B & M – Tork Master 2400 (Part No.70418)
from
$483.99
Torque Converter – Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) APPLICATION: Tork Master 2400 for GM 1993 to 1996 TH700R4 (30 spline) 1984 to 1993 and 4L60E (30 spline) The Tork Master is B&M’s lowest cost pe
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Competition Cams – ENGINE ROCKER ARM (Part No.1617-12)
from
$399.99
ENGINE ROCKER ARM
Competition Cams – Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block (Part No.2136)
from
$119.99
Magnum Double Row Timing Set for OE Roller Chevrolet V6 and 305-350 Small Block
Competition Cams – Endure-X Solid Roller Lifter for Chevrolet V6 and Small Block (Part No.818-1)
from
$55.99
Endure-X Solid Roller Lifter for Chevrolet V6 and Small Block
Competition Cams – ENGINE ROCKER ARM (Part No.1605-1)
from
$51.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1601-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1602-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – ENGINE ROCKER ARM (Part No.1617-1)
from
$50.99
ENGINE ROCKER ARM
Competition Cams – Camshaft Bolts for Chevrolet V8 and V6 (Part No.4611-3)
from
$15.99
Camshaft Bolts for Chevrolet V8 and V6
Most Sold 2001 Chevrolet Express 1500 Performance Transmissions
Explore our best-selling Chevrolet parts for the 2001 Express 1500 among 1 OEM and aftermarket options starting from $86.99.
B & M – Shift Improver Kit For 93-02 4L60E (Part No.70360)
from
$86.99
The B&M Shift Improver Kit the easiest way to get the performance you’ve always wanted out of your automatic transmission, two modes to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit.
Product Features:
See More
Product Features:
- Provides Crisp Shifts
- On Any Stock Automatic Transmission
- Eliminates Soft/Sluggish Shift
- Eliminates Shift Overlap
- Eliminate Clutch and Band Wear
- Improves Transmission Life
- Transmission Removal Not Required
Top-Rated Performance and Racing Products Brands For Your 2001 Chevrolet Express 1500
Shop for the best-rated brands offering Performance and Racing Products and other products for your 2001 Chevrolet Express 1500s. Below you’ll find some of our best rated Performance and Racing Products from FEL-PRO Performance, MSD Ignition, and B & M, and more. Performance and Racing Products from these brands that fit a 2001 Express 1500 start at just $31.49 and are rated as high as 4.2 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.
Popular FEL-PRO Performance 2001 Chevrolet Express 1500 Performance and Racing Products
When it comes to maintaining or upgrading your 2001 Chevrolet Express 1500, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. FEL-PRO Performance ticks all of those boxes. We offer a wide selection of FEL-PRO Performance Performance and Racing Products, specifically designed for the 2001 Chevrolet Express 1500. With over 3 FEL-PRO Performance brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $31.49, with an average price of just $39.66. Plus, with over 4 customer reviews and an average rating of 4.2 stars, you can trust that our FEL-PRO Performance Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular MSD Ignition 2001 Chevrolet Express 1500 Performance and Racing Products
MSD Ignition auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 2001 Chevrolet Express 1500 owner should feel confident when installing genuine MSD Ignition parts in their vehicle. To ensure the best fit and performance for your 2001 Express 1500, Advance Auto Parts carries a full inventory of 2 MSD Ignition Performance and Racing Products. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these MSD Ignition Performance and Racing Products range from $219.99 to $614.99, plus, with more than 5 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.
FAQs for 2001 Chevrolet Express 1500 Performance and Racing Products
Which Performance and Racing Products are best-sellers for 2001 Chevrolet Express 1500s?
Out of 56 Performance and Racing Products that fit 2001 Chevrolet Express 1500s, the following parts are the top sellers:
- Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (5189543) – $42.49
- Exhaust Manifold Gasket Set (5990955) – $31.49
- Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (5990432) – $44.99
What’s the price range for 2001 Chevrolet Express 1500 Performance and Racing Products?
Performance and Racing Product prices for the 2001 Chevrolet Express 1500 start at $8.99 and go up to $921.99 for the most premium parts.
What’s the average price of a Performance and Racing Product for a 2001 Chevrolet Express 1500?
The average price for Performance and Racing Products for the 2001 Chevrolet Express 1500 is $348.17. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Performance and Racing Products for other Chevrolet Express 1500 model years?
What are the cheapest Performance and Racing Products for my 2001 Chevrolet Express 1500?
The cheapest 2001 Chevrolet Express 1500 Performance and Racing Products we carry in stock are:
- Camshaft Bolt for Chevrolet V8 and V6 (50288779) – $8.99
- Camshaft Bolts for Chevrolet V8 and V6 (50288742) – $15.99
- PERFORMANCE VALVE COVER GASKET SET (5189713) – $23.99
- Exhaust Manifold Gasket Set (19781778) – $28.99
- Exhaust Manifold Gasket Set (5990955) – $31.49
What are the top-rated Performance and Racing Products that fit the 2001 Chevrolet Express 1500?
Out of 750 reviews by customers, our 2001 Chevrolet Express 1500 Performance and Racing Products have an average customer rating of . These are some of the highest-rated Performance and Racing Product types for the 2001 Chevrolet Express 1500 and their top-rated products:
- Performance Radiators
- Thermocap Radiator Cap (6900022) – $53.99
- Performance Shifters
- Thermocap Radiator Cap (6900022) – $53.99
What types of Performance and Racing Products do you sell for my 2001 Chevrolet Express 1500?
As of 3/1/26, these are some of the most in-demand types of Performance and Racing Products for a 2001 Chevrolet Express 1500:
Can I get help with 2001 Chevrolet Express 1500 Performance and Racing Product orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Performance and Racing Products and more.
What is your return policy for Chevrolet Express 1500 Performance and Racing Products?
Advance Auto Parts keeps returns simple. For new Chevrolet Express 1500 Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
