2001 Chevrolet Blazer Clutch Systems

Essential Clutch Systems for 2001 Chevrolet Blazers

Dorman – Clutch Pilot Bearing/ Bushing (Part No.690-057)

Clutch Pilot Bearing/ Bushing

from

$28.49
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles.
  • Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GM Genuine Parts – Manual Transmission Clutch Pilot Bearing (Part No.CT1078)

Manual Transmission Clutch Pilot Bearing

from

$24.29
GM Genuine Parts Clutch Pilot Bearings are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These bearings support the end of the transmission input shaft while the clutch is disengaged. They are located in the center of the flywheel in the crankshaft flange. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:
  • Support the end of the transmission input shaft while the clutch is disengaged
  • Allows for smooth changing of gears
  • Helps keep transmission input shaft properly aligned
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
  • GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
  • GM regularly updates production and service part designs to integrate new materials and technologies
See More

ATP – Flywheel Ring Gear (Part No.ZA-512)

Flywheel Ring Gear

from

$33.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – Flywheel Ring Gear (Part No.ZA-500)

Flywheel Ring Gear

from

$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

LuK – Clutch Kit: 10" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline (Part No.04-003)

Clutch Kit: 10" Disc Diameter, 1 1/8" Input Shaft Diameter, 10 Tooth Spline

from

$195.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.04-153)

LuK Original Equipment Quality Replacement CLUTCH KIT

from

$245.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

Dorman – Help – Flywheel Bolts (Part No.14557)

Flywheel Bolts

from

$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)

Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In

from

$11.29
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models.
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

LuK – LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER (Part No.LSC119)

LuK Original Equipment Quality Replacement CLUTCH SLAVE CYLINDER

from

$27.49
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Slave Cylinder (Part No.LSC374)

Clutch Slave Cylinder

from

$168.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

ATP – FLYWHEEL SHIM (Part No.GS-4)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – FLYWHEEL SHIM (Part No.GS-10)

FLYWHEEL SHIM

from

$26.99
FLYWHEEL SHIM

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

Sachs – Clutch Release Bearing (Part No.I2020442185SAC)

Clutch Release Bearing

from

$58.68
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

National – Multi Purpose Bearing (Part No.614083)

Multi Purpose Bearing

from

$56.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Design improvements include extended life and quiet operation
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Multi Purpose Bearing (Part No.614174)

Multi Purpose Bearing

from

$95.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Design improvements include extended life and quiet operation
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Richmond Gear – Differential Cross Shaft (Part No.80-0269-1)

Differential Cross Shaft

from

$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM12)

Differential Cross Shaft

from

$27.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPD44)

Differential Cross Shaft

from

$26.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Sachs – Clutch Release Bearing (Part No.I2020426255SAC)

Clutch Release Bearing

from

$53.68
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

LUK – Clutch Slave Cylinder (Part No.I3010836345LUK)

Clutch Slave Cylinder

from

$159.33
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

ATP – ATP Automatic Transmission Flex Plate (Part No.Z-167)

ATP Automatic Transmission Flex Plate

from

$52.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – M/T FLYWHEEL (Part No.Z-295)

M/T FLYWHEEL

from

$206.99
M/T FLYWHEEL

ATP – AT HD FLEX PLATE (Part No.Z-460)

AT HD FLEX PLATE

from

$60.99
AT HD FLEX PLATE

LuK – Clutch Master Cylinder (Part No.LMC128)

Clutch Master Cylinder

from

$43.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Master Cylinder (Part No.LMC129)

Clutch Master Cylinder

from

$65.99
Schaeffler has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Master Cylinder (Part No.LMC356)

Clutch Master Cylinder

from

$62.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

LuK – Clutch Master Cylinder (Part No.LMC444)

Clutch Master Cylinder

from

$81.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Upgrade your 2001 Chevrolet Blazer with Top-Quality Clutch Systems

When it comes to maintaining or upgrading your 2001 Chevrolet Blazer, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Clutch Systems are key to keeping your Blazer functioning at its best. At Advance Auto Parts, we offer a wide selection of 16 Clutch Systems for the 2001 Chevrolet Blazer, designed to meet your needs without breaking the bank. From Clutch Release Bearing replacements to Clutch Kits upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Clutch Systems for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Clutch Systems for your 2001 Chevrolet Blazer at great prices. Our Clutch Systems inventory for this model ranges from just $20.29 to $245.99, with an average price of $91.51. Our 16 Clutch Systems in stock come from 8 trusted brands, so you’re sure to find the right part for your 2001 Chevrolet Blazer without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2001 Chevrolet Blazer, we stock popular OEM and aftermarket Clutch Systems from top names like ATP, and more. ATP Clutch Systems start at just $23.99 and boast an impressive 4 stars average rating from customers. With 4 customer reviews and counting, our 2001 Chevrolet Blazer Clutch Systems have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Clutch System upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 2001 Chevrolet Blazer is always ready to roll. We’re committed to providing you with everything you need to keep your Blazer in top shape, all in one place. Start shopping confidently below for your 2001 Chevrolet Blazer!

Best-Selling Clutch Release Bearings for 2001 Chevrolet Blazers

Enhance the driving experience in your Chevrolet with 4 quality Clutch Release Bearing components, starting at $27.49.

National – Multi Purpose Bearing (Part No.614174)

Multi Purpose Bearing

from

$95.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Design improvements include extended life and quiet operation
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Clutch Release Bearing (Part No.S-614174)

Clutch Release Bearing

from

$27.49
Product Features:
  • Brand may vary by location
See More

LUK – Clutch Slave Cylinder (Part No.I3010836345LUK)

Clutch Slave Cylinder

from

$159.33
The LuK Clutch Slave Cylinder is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Sachs – Clutch Release Bearing (Part No.I2020182224SAC)

Clutch Release Bearing

from

$120.21
The Sachs release bearing (also known as a throw-out bearing) is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces. Sachs clutch release bearings offer the conventional alignment function in a lightweight, compact body.

Product Features:
  • Extended service life
  • Compact, lightweight design
  • Sealed for life with high performance, application-specific grease
  • Simplified assembly
  • Integrated functionality
  • Design flexibility
See More

Most Popular 2001 Chevrolet Blazer Clutch Kits

Customize your Chevrolet with 1 Clutch Kits products like Clutch Sets, all priced under $245.99.

LuK – LuK Original Equipment Quality Replacement CLUTCH KIT (Part No.04-153)

LuK Original Equipment Quality Replacement CLUTCH KIT

from

$245.99
LuK: The brand professionals trust! For over thirty years, automotive aftermarket technicians have staked their reputation – and their customers’ satisfaction – on LuK RepSet(R) clutch components. Each set contains everything you need to get the job done right: new clutch, disc, release bearing, pilot bearing (where required), spline tool and lubricant. As an original-equipment supplier, LuK develops the performance specifications for individual vehicle applications. LuK offers the highest in-house manufactured content of any supplier in the industry.

Product Features:
  • Application matched for OE form, fit, and function
  • Manufactured with high-quality materials, using cutting edge technology and processes
  • Stock photo – Actual parts and materials may vary.
See More

Top Picks for 2001 Chevrolet Blazer Clutch Master Cylinders

Upgrade Chevrolet Blazers with top-quality Clutch Master Cylinders parts, including 1 OEM and aftermarket selections for your 2001 model.

LuK – Clutch Master Cylinder (Part No.LMC356)

Clutch Master Cylinder

from

$62.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

In-Demand Flywheels for 2001 Chevrolet Blazers

Select from 6 premium Flywheels parts for your 2001 Chevrolet Blazer, with prices ranging from $23.99 to $190.08.

ATP – Automatic Transmission Flex Plate (Part No.Z-367)

Automatic Transmission Flex Plate

from

$117.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability

Product Features:
  • Balanced to factory specs
  • Fit and function like the original parts
  • Restores normal operation
See More

ATP – Flywheel Ring Gear (Part No.ZA-500)

Flywheel Ring Gear

from

$29.99
The ring gear has teeth which engage with the starter motor allowing the engine to crank over and start. Repeated engagement with the starter results in worn or broken ring gear teeth. Once this is diagnosed, the ring gear must be replaced. ATP ring gears are designed to fit and function just like the original part to ensure durability and long life.

Product Features:
  • Manufactured to meet or exceed original equipment specs
  • Eliminates grinding from damaged teeth
  • Increases starter drive life
See More

ATP – ATP Flywheel Shim (Part No.GS-8)

ATP Flywheel Shim

from

$27.99
ATP Flywheel Shim

LUK – Flywheel (Part No.I1000835713LUK)

Flywheel

from

$190.08
Flywheel

ARP Auto Racing – ARP Flywheel Bolt Kit (Part No.200-2802)

ARP Flywheel Bolt Kit

from

$24.99
ARP offers two styles of Flywheel bolts: premium grade Pro Series, with a 200,000 psi rating and High Performance, with a 180,000 psi rating. They are both heat-treated prior to thread rolling and machining, feature an exclusive, flat, 12-point head design and larger than stock shank diameter for increased strength and improved flywheel register. Kits include washers and nuts where applicable.

Product Features:
  • 3/4″ 12-Point Socket Size(s)
  • 8740 Chromoly
  • Black Oxide
  • 7/16″-20 RH Thread Size
  • Set of 6
  • Chevy 90° V6 & 265-454 With 2-pc Rear Seal, Ford 289-460
  • 1″ Underhead Length
See More

ATP – FLYWHEEL SHIM (Part No.GS-11)

FLYWHEEL SHIM

from

$23.99
FLYWHEEL SHIM

Most Sold 2001 Chevrolet Blazer Clutch Slave Cylinders

Explore our best-selling Chevrolet parts for the 2001 Blazer among 2 OEM and aftermarket options starting from $77.99.

LuK – Clutch Slave Cylinder (Part No.LSC265B)

Clutch Slave Cylinder

from

$77.99
LuK has played a crucial role in the development from mechanical to hydraulic clutch release systems. Over many years, Schaeffler has gained extensive expertise in the complete clutch release systems.
See More

Sachs – Clutch Release/Slave Cylinder Assembly (Part No.I2021465276SAC)

Clutch Release/Slave Cylinder Assembly

from

$138.64
Clutch Slave Cylinder Assembly The Sachs Clutch Release/Slave Cylinder Assembly is original equipment quality and maintains the equivalent fit and performance as the OE part it replaces.

Product Features:
  • long life span
  • maintenance-free due to permanent lubrication
  • compact construction
  • Automatic readjustment
  • low pedal forces and wear
  • weight reduction
  • no traction force through hydraulic load on bolts
See More

Top-Rated Clutch Systems Brands For Your 2001 Chevrolet Blazer

Shop for the best-rated brands offering Clutch Systems and other products for your 2001 Chevrolet Blazers. Below you’ll find some of our best rated Clutch Systems from ATP, and more. Clutch Systems from these brands that fit a 2001 Blazer start at just $23.99 and are rated as high as 4 stars. OEM and aftermarket Clutch Systems don’t get more top quality, durable, and affordable than from the brands below.

Popular ATP 2001 Chevrolet Blazer Clutch Systems

When it comes to maintaining or upgrading your 2001 Chevrolet Blazer, using quality Clutch Systems is essential to ensure durability and a perfect fit. ATP ticks all of those boxes. We offer a wide selection of ATP Clutch Systems, specifically designed for the 2001 Chevrolet Blazer. With over 4 ATP brand Clutch Systems in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $23.99, with an average price of just $49.99. Plus, with over 2 customer reviews and an average rating of 4 stars, you can trust that our ATP Clutch Systems will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

ATP Flywheel Shim
from
$27.99
This product is not rated

ATP Flywheel Shim

“”

FLYWHEEL SHIM
from
$23.99
This product is not rated

FLYWHEEL SHIM

“”

Flywheel Ring Gear
from
$29.99
This product is not rated

Flywheel Ring Gear

“”

FAQs for 2001 Chevrolet Blazer Clutch Systems

Which Clutch Systems are best-sellers for 2001 Chevrolet Blazers?

Out of 16 Clutch Systems that fit 2001 Chevrolet Blazers, the following parts are the top sellers:

What’s the price range for 2001 Chevrolet Blazer Clutch Systems?

Clutch System prices for the 2001 Chevrolet Blazer start at $20.29 and go up to $245.99 for the most premium parts.

What’s the average price of a Clutch System for a 2001 Chevrolet Blazer?

The average price for Clutch Systems for the 2001 Chevrolet Blazer is $91.51. Keep in mind the variety of part types within our Clutch System category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Clutch Systems for other Chevrolet Blazer model years?

Yes, we currently carry Clutch Systems for 24 model years of Chevrolet Blazers between 1969 and 2005. Clutch Systems are bought most frequently for the following model years: 2005, 2004, 2003, 2002, 2000, 1999, 1998, 1997, and 1996.

What are the cheapest Clutch Systems for my 2001 Chevrolet Blazer?

The cheapest 2001 Chevrolet Blazer Clutch Systems we carry in stock are:

Can I get help with 2001 Chevrolet Blazer Clutch System orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Clutch Systems and more.

What is your return policy for Chevrolet Blazer Clutch Systems?

Advance Auto Parts keeps returns simple. For new Chevrolet Blazer Clutch Systems and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.